funtec PRO BEACH 111205, PRO BEACH 111206, PRO BEACH 111204 User Manual

USER MANUAL

ID : 1112 06/11120 5/111204

Beach volleyball posts

PRO BEACH

FUNTEC Sports GmbH | Loehestr. 25 | DE - 53773 Hennef | [phone] | [e-mail]

www.funtec.de

USER MANUAL FOR
BEACH VOLLEYBALL POSTS
PRO BEACH

Index

General information

Net installation + Courtline

Spare parts

FUNTEC Sports GmbH | Loehestr. 25 | DE - 53773 Hennef | [phone] | [e-mail]

www.funtec.de

Security advice

- This product has been developed for use at competitions
and at top-class sports.

- This product must be used in accordance with its desig­nated use which is Volleyball or similar sports.

- Before using this product make sure it has been installed
properly and all supports or fittings are firmly tightened.

- This product corresponds with DIN 33957:2012-04
and it has been developed in accordance with DIN EN
1271:2015-01.

- In case the posts have been removed from the sockets
please make sure to cover any remaining parts in a way
that players won‘t get injured.

Assembly instructions

- This product has to be assembled with due care by an
adult person. We recommend to call upon the help of a
second person.

- For this product a level ground is required with the dimen­sions of at least 14 x 22 m (for the leisure sports) or 18 x
26 m (for competition sports).

- Depending on the way of floor mounting it is required
to create foundations according to instructions from this
manual.

- Please take no unneccessary risks while handling the
equipment and be careful when assembling this product.

Maintenance and care

- This product does not require regular maintenance work.
However, we recommend to check all components for da­mages or deformation regularly. Any damaged parts should
be replaced as soon as possible.

- To clean this product, use water and soap avoiding all
types of solvents or alcohol. Do not use dirty or abrasive
cloths.

- Store in a dry place, ideally at a temperature of
10° C to 25° C.

Please read carefully before assembly or use
and retain for future use

ID: 1112 06/11120 5/1112 04

General Information

4

ID: 111206 - WITH FREESTANDING SOCKETS

Beach volleyball Posts
Pro Beach

Pro Beach net posts made from powdercoated
special aluminium profile (91 x 91 mm), telescopic
height adjustment with special socket adapters

Pro Beach sockets with easy-to-use
locking lever

Maximum operation comfort with
exact lever position (open/closed)

Single-arm suspension,
allows easy mounting of net tension cable

Rope pulley with triple block combination including
a stainless steel carabiner with wire gate (for one­handed use)

Pulley block system is self-balancing

to pulling direction

Tensioning counter slider with four

mounting pins, ideal for choosing the best

net pre-tension with differing cable lengths

Open tensioning console with horizontal pins for best
choice of net cord angle

Includes an additional clamcleat below for comfortable
fine adjustment of tensioning ropes

Sockets with T-base for a freestanding
installation with square timbers

5

ID: 111206

Scope of delivery

Pro Beach socket

with T-Base

2 x

Minimum sand level

35 cm

Net post with

tackle tensioning slider

Net post with

tensioning counter slider

1 x 1 x

6

Important notice!

7

General information on building a Beach Volleyball court with City Beach sockets:

When building a sand court we suggest to fill up the sand first of all. Afterwards you can just dig in the City Beach ground
sockets and set up the net system.

We consider a permanent sand level of 40-50 cm as ideal. It is recommended to fill up the sand a little bit higher at the
centres of the playing field halves. It will be moved away towards the court surrounds by the players. Please make sure to
create a minimum sand level of 35 cm around the ground sockets for this installation option.
Example: Approximately 250 tons sand are required for a sand court with 14 x 22 m dimensions (for leisure sports) and a
sand level of approximately 45 cm. Calculation: volume in m³ x density factor (e.g.: 1,8 - depending on the grain size and
the sand quality).

Required for assembly:
Pressure-treated square timbers, 6 pieces, each 1500 x 88 x 88 mm (maximum dimensions: 1500 x 90 x 90 mm), suitable
for permanent ground contact

Minimum Sand level: 35 cm

Insert square timbers into T-base

Mark the outline of the square timbers Make excavations according to outlines

Secure with suitable screws

Set into position: ground sockets together with inserted square timbers

10 m (with a 8.5 m net)
11 m (with a 9.5 m net)

GROUND INSTALLATION FOR ID: 111206

6x

8

Fill up the excavation
(Be careful not to move the timbers when doing this!)

Step on the timbers to press them firmly into the sand

Align the sockets with each other - inserting the net poles
will be helpful

The sockets are designed with a 2° sloping angle to the
outwards

Set ground sockets with timbers into excavation; be careful
not to step onto the borders of the excavation

GROUND INSTALLATION FOR ID: 111206

2° 2°

Minimum: 35 cm

9

Square timber set

ID: 111232

1 x

Pro Beach Courtline

ID: 111304

Square-cut Beach Volley post pads (100 x 100 mm),

1 pair, ID: 111353

1 x

ACCESSORIES FOR ID: 111206 (SOLD SEPARATELY)

Pro Beach net PLUS, incl. net antennas PLUS

(2-piece, with velcro strap pockets), ID: 111601

1 x

1 x

10

ID: 111205 - WITH BOLT-DOWN SOCKETS

Beach volleyball Posts
Pro Beach

Pro Beach net posts made from powdercoated
special aluminium profile (91 x 91 mm), telescopic
height adjustment with special socket adapters

Single-arm suspension,
allows easy mounting of tension cable

Rope pulley with triple block combination including
a stainless steel carabiner with wire gate (for one­handed use)

Pulley block system is self-balancing

to pulling direction

Tensioning counter slider with four

mounting pins, ideal for choosing the best

net pre-tension with differing cable lengths

Open tensioning console with horizontal pins for best
choice of net cord angle

Includes an additional clamcleat below for comfortable
fine adjustment of tensioning ropes

Sockets with bolt-down base for installation
on a concrete foundation

Pro Beach sockets with easy-to-use
locking lever

Maximum operation comfort with
exact lever position (open/closed)