Fundo Smart Watch User Manual

Smart Watch User Manual

Thank you for choosing our product !

The product supports waterproof with IP67 level, it is available to wear it while wash
hands, in raining, etc.
Do not use it when have a hot shower/bath or sauna, the vapors will get into the
host, scratch damage of peripheral components. All these are beyond the scope of
the warranty.

Operation Guide

Long press for switch ON/OFF the watch.Press for wake the screen and off the
screen.

Charging instruction: This product adopts magnetic force charging. Put the

charging point connect to the back of the device charging pins, it will charge
automatically. Support PC USB or standard 5V charger.

Caution: Do not make the magnetic charging cable any 4 pins connect

with conducting material at same time, it may cause short circuit.

APP download method

Watch connects to Phone, Download the App “Fundo” in the Phone at first,
reference following 2 methods:

Android Phone: search and download “Fundo” app from Google Play;

①

IOS phone: search and download “Fundo” app from Apps Store;
Scan following QR code image by browsers or by any Scanner to Download

②

“Fundo”.

Scan QR code and Download “Fundo”APP.

Bluetooth connection

1.Android Phone: Support operating system 4.4 and above;

2. IOS phone: Support original operating system 7.0 and above;

Pair with Android phone

☆

Turn on the smart phone Bluetooth switch,Enter the 'Fundo' menu,Select bottom

①

right corner,Enter 'More',Click to 'add device',And click to 'Search',It will automati

-cally search for nearby enabled Bluetooth devices.
Find the watch name and pair with it,After successful pairing,the Bluetooth icon in

②

the watch drop-down menu will be green,the watch and the phone can search each
other for the device successfully.There is vibration and ringing on the mobile phone,
Click Bluetooth connect,Connectable 3.0,After successful pairing,the Bluetooth icon
in the watch drop-down menu will be gradient blue green.

Pair with IOS phone

☆

Turn on the smart phone Bluetooth switch,Enter the 'Fundo' menu,Select bottom

①

right corner,Enter 'More',Click to 'add device',And click to 'Search',It will automati

-cally search for nearby enabled Bluetooth devices.
Find the watch name and pair with it,After successful pairing, the Bluetooth icon

②

in the watch drop-down menu will be green,At this time, a Bluetooth device is
displayed on the Bluetooth menu interface of the mobile phone.

Click "Bluetooth Call" on the watch→‘Search for Bluetooth devices ’Find the

③

phone name,match it,After successful pairing,In the Bluetooth menu interface of the
mobile phone, two Bluetooth devices have been connected successfully.

The Bluetooth icon in the watch drop-down menu will be gradient blue green,the

④

watch and the phone can search each other for the device successfully,Through the
watch - search for my device, there is vibration and ringing on the mobile phone
Through the mobile phone - find the device, watch side vibration and ring.

How to setting notification:

Into phone’s Settings-App Management, find “Fundo”-permissions Management,
turn on all allow.Into Notifications- find “Fundo”, Turn all on allow. Into “Fundo”­“Application push”, select all allow.

Main function introduction
Phone

Contacts: It can synchronize mobile phone contact, view and dial through Bluetooth