Funai UNIREMT00001 User Manual
CATALYST™48
UNIVERSAL REMOTE CONTROL
USER GUIDE
INTRODUCTION
The Catalyst™ 48 Universal Remote
Control,developed by Universal
Electronics, Inc. for Funai, is the complete
solution for all of your remote control
requirements.It is designed to operate
from four to eight devices with the
emphasis on features and functions of
your dedicated component(s).
The Catalyst 48 requires two (2) fresh
AA alkaline batteries (not included)
and some easy programming to control
your devices.For best results, please
read and perform all instructions listed
here.Also, keep these instructions for
future reference.
FEATURES AND FUNCTIONS
Use the Key Charts to learn how the
Catalyst 48 functions.
Key Charts
The LED (red light)
blinks to show that
the remote control is
working and is
sending signals.
SETUP for all
Use
programming
sequences.
Press
PWR once to
turn on or off the
selected home entertainment component.
AUX, CBL,VCR,
Press
TV, SAT, CD,AMP,or
TNR once to select a
home entertainment
component to control.
Use the keypad (
to directly select
channels (for example,
09 or 31).
MUTE once to
Press
turn sound off
or on.
ENTER once after
Press
entering channel
numbers on some TV
models.
VOL + (or VOL-)
Use
to raise (or lower) the
sound volume.
Use CH + (or CH -) to
select the next higher
(or lower) channel.
Press LAST once to
recall the last channel
and to page back one
screen in the
main menu.
SLEEP to activate
Press
your TV’s sleep timer.
Or if none is available,
press
SLEEP to activate
the Catalyst 48’s sleep
timer for automatic
shut-off of your TV.
Each key press (up to
four) add 15 minutes
to the sleep timer.
INPUT once to
Press
switch the input of the
chosen component.
GUIDE to display
Use
the program guide.
EXIT to exit out of
Use
the selected component’s menu or guide.
Use the cursor keys to
move the cursor in
the program guide and
menu screens.
SELECT to choose
Use
options from your
selected component’s
menu or guide.
INFO to display
Use
current channel and
program information.
MENU to access
Press
the menu of your
chosen component.
0 ~ 9)
Use the transport
keys to control
your VCR,or CD or
DVD player.
Use these keys for
specific features on
your dedicated
components.
INSTALLING BATTERIES
1. On the back of the Catalyst 48,push
the tab and lift off the battery cover.
2. Obtain two (2) fully-charged AA
alkaline batteries. Match the + and –
marks on the batteries to the + and
– marks in the battery case, then
insert the new batteries.
3. Press the battery cover back into
place.The tab should click when the
cover is locked.
4. Test the unit by pressing
any mode key (e.g.,
etc.). If the batteries are inserted correctly, the LED will blink once.
NOTE:When batteries need replacement,
the Catalyst 48 will blink twice with every
key press.Simply replace them and the
remote control will be restored to its full
functionality, including favorite settings.
PWR and
AUX, CBL,VCR,
PROGRAMMING
COMPONENT CONTROL
The Catalyst 48 can control up to eight
different components. Perform the following instructions for each component
you want controlled:
NOTE: For TV/VCR Combo control, see the
next section.
1. Turn on a component (e.g.,VCR)
and, if applicable, insert media,
(e.g., cassette or disc).
NOTE: Please read steps 2-4 completely
before proceeding. We recommend
highlighting or writing down the codes
and device you wish to program before
moving onto step 2.
2. On the Catalyst 48,press a component
key once (i.e.,
CD, AMP,or TNR). Press and hold
SETUP until the LED blinks twice,
then release
3. Use the
back side) to locate the the type of
component and brand name and
then enter the first four-digit code
for your component. If performed
correctly, the LED will blink twice.
NOTE: If the LED did not blink twice, then
repeat steps 2 through 3 and try entering
the same code again.
AUX,CBL, VCR,TV, SAT,
SETUP.
Manufacturer’s Codes (on the
4. Aim the Catalyst 48 at the component
and press
off. If it does not respond, repeat steps
2-3, trying each code for your brand
until you find one that works.If it still
does not work,try searching for the
code (see
NOTE: If the device does not have a PWR
key, press PLAY.
5. Repeat steps 1 through 4 for each
component you want the Catalyst 48
to control.
PWR once. It should turn
Searching For Your Code).
PROGRAMMING
TV/VCR COMBO CONTROL
Perform the following instructions to
control a TV/VCR Combo:
1. Turn on the TV/VCR Combo and
insert a video cassette.
NOTE: Please read steps 2-4 completely
before proceeding. We recommend
highlighting or writing down the code
for the brand you wish to program
before moving onto step 2.
2. On the Catalyst 48,press VCR.Press
and hold
SETUP until the LED blinks
twice, then release
3. Use the
4. Aim the Catalyst 48 at the component
5. If you’ve located a setup code that
Setup Codes For TV/VCR
Combos
(on the back side) to locate
the brand name and then enter the
first four-digit code for your component.If performed correctly, the LED
will blink twice.
NOTE: If the LED did not blink twice, then
repeat steps 2 through 3 and try entering
the same code again.
and press
off. If it does not respond, repeat steps
2-3, trying each code for your brand
until you find one that works.If it still
does not work,try searching for the
code (see
NOTE: If the device does not have a PWR
key, press PLAY.
works,but it has a separate TV code,
you’ll also need to program it into the
Catalyst 48 to access volume control
as follows:
a. Press
blink twice.
b. Enter the TV code for your
TV/VCR Combo. If correct, the
LED will blink twice.
If there is no separate TV code listed,
you will need to perform the following steps to access volume control:
a. Press and hold
LED blinks twice, then release
SETUP.
b. Ent er
blink twice.
c. Press
blink twice.
SETUP.
PWR once. It should turn
Searching For Your Code).
TV once. The LED will
SETUP until the
9 - 9 - 3 . The LED will
VCR once. The LED will
SEARCHING FOR YOUR CODE
If your device does not respond to the
Catalyst 48 after trying all codes listed
for your brand, or if your brand is not
listed at all,try searching for your code.
For example, to search for a code for
your TV:
1. On the Catalyst 48,press
2. Press and hold
blinks twice, then release
9 - 9 - 1. The LED will
3. Enter
blink twice.
4. Aim the remote control at the the
TV and slowly alternate between
pressing PWR and TV. Stop when the
TV turns off.
NOTE: In the search mode,the
Catalyst 48 will send IR codes from its
library to the selected device, starting
with the most popular code first.
5. Press SETUP once to lock in the code.
6. To search for the codes of your other
components, repeat steps 1 through
5, but substitute the appropriate key
(i.e., AUX, CBL,VCR, SAT,CD, AMP,or
TNR) for the (Auxiliary,VCR, Cable,
Satellite,CD, Amplifier, or Tuner)
component you are searching for.
TV once.
SETUP until the LED
SETUP.
CHECKING THE CODES
If you have set up the Catalyst 48 using
the
Searching For Your Code procedure,
you may need to find out which fourdigit code is operating your equipment:
For example,to find out which code is
operating your TV:
1. On the Catalyst 48,press
2. Press and hold
blinks twice, then release
9 - 9 - 0. The LED will
3. Enter
blink twice.
4. To view the code for the first digit,
1 once.Wait 3 seconds, count
press
the LED blinks (e.g., 3 blinks = 3)
and write down the number.
NOTE: If a code digit is “0”,the LED
will not blink.
5. Repeat step 4 three more times for
remaining digits.Use
ond digit,
for the fourth digit.
6. To check for the codes of your other
components, repeat steps 1 through
5, but substitute the appropriate key
(i.e., AUX, CBL,VCR, SAT, CD, AMP,or
TNR) component you are checking.
As before, write down each fourdigit code.
3 for the third digit, and 4
TV once.
SETUP until the LED
SETUP.
2 for the sec-
RE-ASSIGNING DEVICE KEYS
The Catalyst 48 can be set up to control a
second TV or VCR, or any combination of
eight home entertainment components.
For example, to have the Catalyst 48 control a TV, a Cable Converter,and two
VCRs,you will need to re-assign the
unused
AUX key to operate the second
VCR as follows:
1. On the Catalyst 48,press and hold
SETUP until the LED blinks twice,
then release
2. Enter
blink twice.
3. Press
4. The
grammed for your second VCR. See
Programming Component Control.
To re-assign other device keys, repeat
steps 1 through 4 by substituting the key
sequence from the below chart for the
most popular components:
To Re-Assign Key
Sequence Perform
TV as 2nd VCR key: SETUP - 9 - 9
TV
as 2nd CBL key: SETUP - 9 - 9
as 2nd AUX key: SETUP - 9 - 9
TV
as 2nd TNR key: SETUP - 9 - 9
TV
as 2nd AMP key: SETUP - 9 - 9
TV
as 2nd CD key: SETUP - 9 - 9
TV
as 2nd SAT key: SETUP - 9 - 9
TV
back to TV: SETUP - 9 - 9
TV
as 2nd TV key: SETUP - 9 - 9
VCR
as 2nd CBL key: SETUP - 9 - 9
VCR
as 2nd AUX key: SETUP - 9 - 9
VCR
as 2nd TNR key: SETUP - 9 - 9
VCR
as 2nd AMP key: SETUP - 9 - 9
VCR
as 2nd CD key: SETUP - 9 - 9
VCR
as 2nd SAT key: SETUP - 9 - 9
VCR
back to VCR: SETUP - 9 - 9
VCR
SETUP.
9 - 9 - 2.The LED will
VCR once, then press AUX once.
AUX key is now ready to be pro-
- 2 - VCR - TV
- 2 - CBL - TV
- 2 - AUX - TV
- 2 - TNR - TV
- 2 - AMP - TV
- 2 - CD - TV
- 2 - SAT - TV
- 2 - TV - TV
- 2 - TV - VCR
- 2 - CBL - VCR
- 2 - AUX - VCR
- 2 - TNR - VCR
- 2 - AMP - VCR
- 2 - CD - VCR
- 2 - SAT - VCR
- 2 - VCR - VCR
as 2nd TV key: SETUP - 9 - 9
AUX
as 2nd VCR key: SETUP - 9 - 9
AUX
AUX
as 2nd CBL key: SETUP - 9 - 9
as 2nd TNR key: SETUP - 9 - 9
AUX
as 2nd AMP key: SETUP - 9 - 9
AUX
as 2nd CD key: SETUP - 9 - 9
AUX
as 2nd SAT key: SETUP - 9 - 9
AUX
back to AUX: SETUP - 9 - 9
AUX
When a re-assignment is done, the LED
will blink twice to confirm your choice.
At that time,you will need to program the
Catalyst 48 to control the new component
(see
Programming Component Control).
- 2 - TV- AUX
- 2 - VCR - AUX
- 2 - CBL - AUX
- 2 - TNR - AUX
- 2 - AMP - AUX
- 2 - CD - AUX
- 2 - SAT - AUX
- 2 - AUX - AUX
CHANGING VOLUME LOCK
The Catalyst 48 is set to control volume
of a component through your TV while
in the TV,VCR,Cable,or Satellite mode.
However,in an Audio mode (i.e.,
AMP,or CD), you have separate control of
your audio component’s volume.
If your TV is not remote controllable, or
if you want volume to be controlled by a
different component,you can change the
Volume Lock setting to control a volume
through a non-associated mode (e.g.,
through the cable in the TV mode).
To change Volume Lock to the
another mode:
1. On the Catalyst 48,press and hold
SETUP until the LED blinks twice,
then release
2. Enter
mode key once (except
will blink twice.
3. Now, whenever you press
VOL –,or MUTE,volume will be con-
trolled by your mode choice.
SETUP.
9 - 9 - 3 and then press any
To change Volume Lock back to the
TV mode:
1. On the Catalyst 48,press and hold
SETUP until the LED blinks twice,
then release
2. Enter
The LED will blink twice.
3. Now, whenever you press
VOL –,or MUTE on the Catalyst 48,
volume will be controlled by your TV.
SETUP.
9 - 9 - 3 and then press TV.
TNR,
TV). The LED
VOL +,
VOL +,
TROUBLESHOOTING
PROBLEM: LED does not blink when
SOLUTION: Replace the batteries with
PROBLEM: LED blinks when you
SOLUTION: Make sure the Catalyst 48
PROBLEM: Catalyst 48 does not con-
SOLUTION: Try all listed codes for the
PROBLEM: TV/VCR combo does not
SOLUTION: Use the VCR codes for
PROBLEM: No volume on a 2nd TV.
SOLUTION: Follow instructions in
PROBLEM:
SOLUTION: Due to RCA design (1983-
PROBLEM: Changing channels does
SOLUTION: If original remote control
PROBLEM: Tried “Search Method”
SOLUTION: Try the “Search Method”
you press a key.
two (2) new AA alkaline
batteries.
press a key, but home
entertainment component
does not respond.
is aimed at your home
entertainment component
and is not farther than
15 feet away.
trol home entertainment
components or commands
are not working properly.
component brands being
set up.Make sure they
can be operated with an
infrared remote control.
respond properly.
your brand.Some combo
units may require both a
TV code and a VCR code
for full operation.
Changing Volume Lock.
CH+ , CH-,and LAST do
not work for your RCA TV.
1987), only the original
remote control will operate these functions.
not work properly.
required pressing ENTER
to change channels, press
ENTER on the Catalyst 48
after entering the
channel number.
and still could not find a
working code.
again after clearing out
the device key as follows:
Press and hold
until the red light blinks
twice, then release. Next
enter
and release the device key
to be cleared twice.
SETUP
9 - 9 - 2.Then press
Continued on back...
TROUBLESHOOTING (CONT’D)
PROBLEM: Remote control does not
SOLUTION: For power on, these prod-
turn on Sony or Sharp
TV/VCR Combo.
ucts require programming
TV codes. For Sony, use
TV code 0000 and VCR
code 0032. For Sharp,use
TV code 0093 and VCR
code 0048.
MANUFACTURER’S CODES
Setup Codes for Audio Amplifiers:
GE 0078
Harman/Kardon 0892
JVC 0331
Marantz 0892
Optimus 0395
Philips 0892
Polk Audio 0892
Realistic 0395
Sony 0689
Soundesign 0078
Victor 0331
Wards 0078
Yamaha 0354
Setup Codes for Audio Receivers
or Tuners :
ADC 0531
Aiwa 0121,1405, 1089
Capetronic 0531
Carver 1089, 1189
Denon 1160, 1104
Harman/Kardon 0110
JBL 0110
JVC 0074
Kenwood 1027, 0186, 1313,1569, 1570
MCS 0039
Magnavox 1089, 0531, 1189
Marantz 1189, 1089, 0039
Onkyo 0135
Optimus 1023, 0186, 0531,0670
Panasonic 0039,1518
Philips 1089, 1189, 1269
Pioneer 0150, 0531, 0630, 1023
Proscan 1254
Quasar 0039
RCA 1254, 0531, 1023
Sansui 1089
Sharp 0186
Sony 1158, 1058, 1258
Soundesign 0670
Sunfire 1313
Technics 0039, 1308, 1518, 1309
Thorens 1189
Victor 0074
Yamaha 0176, 0186, 1176
Setup Codes for Cable Coverters:
ABC 0003, 0017
Americast 0899
Bell South 0899
General Instrument
GoldStar 0144
Hamlin 0009, 0273
Jerrold 0003, 0276, 0476,0810
Memorex 0000
Motorola 1106
Pace 0237
Panasonic 0107,0000
Paragon 0000
0276, 0476, 0810
Philips 0305, 0317
Pioneer 0144, 0533, 0877
Pulsar 0000
Quasar 0000
Regal 0273, 0279
Runco 0000
Samsung 0144
Scientific Atlanta 0017, 0477, 0877
Starcom 0003
Toshiba 0000
Zenith 0000, 0525, 0899
Setup Codes for CD Players:
Aiwa 0157
Burmester 0420
Cal. Audio Labs 0029
Carver 0157, 0179
DKK 0000
Denon 0003, 0873
Emerson 0305
Fisher 0179
Garrard 0420
Genexxa 0032, 0305
Harman/Kardon 0157, 0173
Hitachi 0032
JVC 0072
Kenwood 0028, 0190, 0826,0037, 0626, 0681
Krell 0157
LXI 0305
Linn 0157
MCS 0029
MTC 0420
Magnavox 0157, 0305
Marantz 0157, 0626, 0029
Mission 0157
NSM 0157
Onkyo 0101, 0868
Optimus 0032, 0468, 0420,0179, 0305, 1063,
Panasonic 0029
Parasound 0420
Philips 0157, 0626
Pioneer 0032, 0468, 0305, 1062,1063
Polk Audio 0157
Proton 0157
QED 0157
Quasar 0029
RCA 0053, 0032, 1062,0468, 0305, 0179
Realistic 0179, 0420
Rotel 0157, 0420
SAE 0157
Sansui 0157, 0305
Sanyo 0179
Scott 0305
Sears 0305
Sharp 0037, 0861
Sherwood 1067
Sonic Frontiers 0157
Sony 0000, 0490
Soundesign 0145
Tascam 0420
Teac 0420
Technics 0029
Victor 0072
Wards 0053, 0157
Yamaha 0036, 0888
0000, 0037, 0145
Setup Codes for DVD Players:
Apex 0672
Denon 0490
Emerson 0675, 0821
Fisher 0670
FUNAI 0675, 1334
GE 0522
Gradiente 0651
Hitachi 0573, 0664
Hiteker 0672
JVC 0623, 0558
Kenwood 0682, 0534
Konka 0719, 0711,0720, 0721
Magnavox 0675, 0821, 0503,0675
Marantz 0539
Mitsubishi 0521
Onkyo 0503
Optimus 0571
Oritron 0651
Panasonic 0490,0677, 0632
Philips 0539, 0503
Pioneer 0571, 0525, 0632
Proscan 0522
RCA 0522, 0571
Samsung 0573
Sharp 0630
Sony 0533
Superscan 0821
Sylvania 0675, 0821
Symphonic 0675
Technics 0490
Theta Digital 0571
Toshiba 0503
Yamaha 0490, 0545
Zenith 0591, 0503
Setup Codes for DVD Player/
VCR Combos:
Sylvania 0593
Symphonic 0675
Setup Codes for Home Automation:
GE 0240
One For All 0167
Radio Shack 0240
Security System 0167
Universal X10 0167
X10 0167
Setup Codes for Satellite Receivers:
AlphaStar 0772
Chaparral 0216
Echostar 0775, 1005
Expressvu 0775
GE 0566
General Instrument
HTS 0775
Hitachi 0819
Hughes Net.Sys. 0749, 1142,1749
JVC 0775
Magnavox 0722, 0724
Memorex 0724
Mitsubishi 0749
Next Level 0869
Panasonic 0247,0701
Philips 1076, 1142, 0722,0724, 0749
Proscan 0392
RCA 0566, 0392, 0143,0855
Radio Shack 0869
Samsung 1109
Sony 0639
Star Choice 0869
Toshiba 0749, 0790
Uniden 0724, 0722
Zenith 0856
0869
Setup Codes for TVs:
AOC 0019, 0030
Admiral 0093, 0463
Aiko 0092
Aiwa 0701
Akai 0030
Alaron 0179
America Action 0180
Anam 0180
Audiovox 0092, 0180, 0451, 0623
Baysonic 0180
Belcor 0019
Bell & Howell 0016, 0154
Bradford 0180
Brockwood 0019
Broksonic 0236, 0463
CXC 0180
Candle 0030, 0056
Carnivale 0030
Carver 0054
Celebrity 0000
Cineral 0451, 0092
Citizen 0056, 0030, 0060,0092
Concerto 0056
Contec 0180
Craig 0180
Crosley 0054
Crown 0180
Curtis Mathes 0060, 0030,0016, 0047, 0051,0054,
Daewoo 0092,0623, 0019, 0624, 0451
Daytron 0019
Denon 0145
Dumont 0017, 0019
Durabrand 0171
Electroband 0000
Emerson 0171, 0236, 0180, 0178, 0179,0463,
Envision 0030
Fisher 0154
Fujitsu 0179, 0683
FUNAI 0171, 1271, 0180,0179
Futuretech 0180
GE 0047, 1347, 0051, 0178, 0451, 1147,
Gibralter 0017,0019, 0030
GoldStar 0178, 0019,0030, 0056
Gradiente 0056,0053
Grunpy 0179, 0180
Hallmark 0178
Harley Davidson 0179
Harman/Kardon 0054
Harvard 0180
Hitachi 0145, 0056, 0016
Infinity 0054
Inteq 0017
JBL 0054
JCB 0000
JVC 0053
KEC 0180
KTV 0180, 0030
Kenwood 0030, 0019
Konka 0707, 0632,0628, 0638, 0703
LG 0056
LXI 0154, 0047, 0054, 0156,0178
Logik 0016
Luxman 0056
MGA 0150, 0019, 0030, 0178
MTC 0060, 0030, 0019, 0056
Magnavox 0054, 0030, 0179,1254
Majestic 0016
Marantz 0054, 0030
Matsushita 0250
Megatron 0145,0178
Memorex 0179, 0463,0178, 0016, 0056, 0150,
Midland 0017, 0047, 0051
Mitsubishi 0150, 0178, 0019, 0093
Motorola 0093
Multitech 0180
NAD 0156, 0166, 0178
NEC 0030, 0019, 0056
NTC 0092
Nikko 0178, 0030, 0092
Onwa 0180
Optimus 0250, 0166, 0154
Optonica 0093
Orion 0463, 0179, 0236
Panasonic 0051,0250
Penney 0047, 1347, 0060, 0030,0178, 0051,
Philco 0145, 0019,0030, 0054, 0463
Philips 0054
Pilot 0019, 0030
Pioneer 0166, 0679
Portland 0019, 0092
Princeton 0717
Prism 0051
Proscan 0047
Proton 0178
Pulsar 0017, 0019
Quasar 0051, 0250
0056, 0093, 0145,0154, 0166, 0451,
1147, 1347
0624, 0623, 0019,0154
0093
0154, 0250
0019, 0056, 0156
RCA 0047, 1347, 1147,0679, 1247, 0019,
RadioShack 0180, 0030,0178, 0154, 0019, 0047,
Realistic 0180, 0154, 0030, 0178, 0019,0056
Runco 0017, 0030
SSS 0019, 0180
Sampo 0030
Samsung 0060, 0019, 0178,0030, 0056
Sansei 0451
Sansui 0463
Sanyo 0154
Scimitsu 0019
Scotch 0178
Scott 0236, 0019, 0178, 0179, 0180
Sears 0171, 0154, 0056, 0156, 0047,0054,
Semivox 0180
Semp 0156
Sharp 0093, 0688
Shogun 0019
Signature 0016
Sony 0000
Soundesign 0178, 0179, 0180
Squareview 0171
Starlite 0180
Supreme 0000
Sylvania 0171, 0054, 0030
Symphonic 0171, 0180
TMK 0056, 0178
TNCi 0017
Tandy 0093
Technics 0051, 0250
Technol Ace 0179
Techwood 0051, 0056
Teknika 0016, 0054, 0179, 0180,0019, 0092,
Telefunken 0056
Toshiba 0156, 0060, 0154, 1256
Vector Research 0030
Victor 0053
Vidikron 0054
Vidtech 0019, 0178
Wards 0054, 0178, 0016, 0019, 0030,0056,
White Westinghouse
Yamaha 0019, 0030
Zenith 0017, 0624, 0016,0092, 0463
0051, 0090, 0093,1047, 1447
0056
0178, 0179
0056, 0060, 0150
0179
0624, 0623, 0463
Setup Codes for TV/DVD Player
Combos:
Sylvania 0171, 0675
Setup Codes for TV/VCR Combos:
American High 0035 (for TV use 0051)
Brocksonic 0002, 0294,
Colt 0072
Curtis Mathis 0035 (for TV use 0051)
Daewoo 0278
Emerson 0002, 0294, 0479
FUNAI 0000
GE 0035 (for TV use 0051),
Hitachi 0035 (for TV use 0051), 0000
HQ 0000
Lloyd’s 0000
MGA 0240
Magnasonic 0593
Magnavox 0593, 0081 (for TV use 0054),
Magnin 0240
Memorex 0037, 0162 (for TV use 0250)
Mitsubishi 0048 (for TV use 0093)
Optimus 0593
Orion 0002, 0294, 0479
Panasonic 0035 (for TV use 0051),
Penney 0035 (for TV use 0051), 0240,
Quasar 0035 (for TV use 0051),
0060 (for TV use 0047),
0048 (for TV use 0093), 0240
0035 (for TV use 0051), 0000
0162 (for TV use 0250)
0162 (for TV use 0250)
0162 (for TV use 0250)
RCA 0060 (for TV use 0047),
Sansui 0000, 0479
Sanyo 0240
Sears 0000, 0037
Sharp 0048 (for TV use 0093)
Sony 0032 (for TV use 0000)
Symphonic 0593, 0000
Zenith 0000
0035 (for TV use 0051),
0048 (for TV use 0093)
Setup Codes for TV/VCR/DVD Player
Combos:
Emerson 0821, 1334
FUNAI 1334
Magnavox 0821
Superscan 0821
Sylvania 0821, 1334
Setup Codes for VCRs:
Admiral 0048, 0209
Adventura 0000
Aiko 0278
Aiwa 0000, 0037
America Action 0278
American High 0035
Asha 0240
Audiovox 0037
Beaumark 0240
Bell & Howell 0104
Broksonic 0121, 0184,0002, 0209, 0479
CCE 0072, 0278
Calix 0037
Canon 0035
Carver 0081
Cineral 0278
Citizen 0278, 0037
Colt 0072
Craig 0037, 0072, 0047, 0240
Curtis Mathes 0035, 0060,0162
Cybernex 0240
Daewoo 0278,0045
Denon 0042
Dynatech 0000
Electrohome 0037
Electrophonic 0037
Emerex 0032
Emerson 1593, 0184, 0002, 0209, 0278,0121,
Fisher 0047, 0104
Fuji 0033, 0035
FUNAI 1593, 0000
GE 0035, 0060, 0048, 0240
Garrard 0000
Go Video 0432
GoldStar 0037, 0038
Gradiente 0000
HI-Q 0047
Harley Davidson 0000
Harman/Kardon 0038, 0081
Harwood 0072
Hitachi 0042, 0000
Hughes Net.Sys. 0042
JVC 0067
KEC 0037, 0278
KLH 0072
Kenwood 0067, 0038
Kodak 0035, 0037
LXI 0037
Lloyd’s 0000
Logik 0072
MEI 0035
MGA 0043, 0240
MGN Technology 0240
MTC 0000, 0240
Magnasonic 0593, 0278
Magnavox 0593, 0035, 0081,0563, 0000, 0039,
Magnin 0240
Marantz 0081, 0035
Marta 0037
Matsushita 0035, 0162
0479, 0000, 0037,0043
0149
Memorex 0104, 0047,0479, 0000, 0037, 0048,
Minolta 0042
Mitsubishi 0043, 0048, 0067
Motorola 0035, 0048
Multitech 0000, 0072
NEC 0038, 0067, 0104
Nikko 0037
Noblex 0240
Olympus 0035
Optimus 0593, 0162, 1062,1162, 0048, 1262,
Orion 0479, 0002, 0184,0209
Panasonic 0035,0162, 1162, 1262, 1362, 0616,
Penney 0035, 0240, 0037, 0042,0038
Pentax 0042
Philco 0035, 0209,0479
Philips 0081, 0035, 0618,1081, 1181
Pilot 0037
Pioneer 0067
Polk Audio 0081
Profitronic 0240
Proscan 0060
Protec 0072
Pulsar 0039
Quasar 0035, 0162, 1162
RCA 0060, 0149, 0042,0035, 0048, 0240
RadioShack 0000, 1037
Radix 0037
Randex 0037
Realistic 0000, 0104, 0047, 0048, 0037,0035
ReplayTV 0614, 0616
Runco 0039
STS 0042
Samsung 0045, 0240
Sanky 0039, 0048
Sansui 0479, 0000,0067, 0209
Sanyo 0047, 0104, 0240
Scott 0184, 0121, 0043, 0045
Sears 0037, 0042, 0000, 0035, 0047,0104
Semp 0045
Sharp 0048
Shintom 0072
Shogun 0240
Singer 0072
Sony 0033, 0032, 0000,0035, 0636, 1032
Sylvania 0593, 1593, 0035,0081, 0000, 0043
Symphonic 1593, 0593, 0000
TMK 0240
Teac 0000
Technics 0035, 0162
Teknika 0000, 0035, 0037
Thomas 0000
Tivo 0618, 0636
Toshiba 0045, 0043
Totevision 0037, 0240
Unitech 0240
Vector 0045
Vector Research 0038
Video Concepts 0045
Videosonic 0240
Wards 0035, 0060, 0000, 0047, 0240,0042,
White Westinghouse
XR-1000 0072, 0000,0035
Yamaha 0038
Zenith 0039, 0000, 0033,0209, 0479
0035, 0240, 1037,0039, 0162, 0209,
1162, 1262
0037, 1048, 0104,0432
1062
0048, 0072, 0081,0149
0072, 0278, 0209
Setup Codes for Video Accessories:
Panasonic 1120
Pioneer 1010
Sensory Science 1126
Sharp 1010
Sylvania 1563
ADDITIONAL INFORMATION
The Catalyst 48 does not have any user-serviceable
parts. Opening the case,except for the battery cover,
may cause permanent damage to your Catalyst 48.
©2004 by Universal Electronics, Inc.No part of this
publication may be reproduced, transmitted,transcribed, stored in any retrieval system,or translated
to any language,in any form or by any means, electronic, mechanical,mag netic,optical, manual, or
otherwise, without the prior written permission of
Universal Electronics, Inc.
M4800A 09/04
Loading...