FUNAI F220LC User Manual

346.16 Kb
Loading...

OWNER’S

MANUAL

If you need additional operating assistance after

reading this owner's manual

or to order replacement F220LC accessories, please call

TOLL FREE : 1-800-242-7158.

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, WARNING: DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The caution marking is located on the rear of the cabinet.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.

IMPORTANT SAFEGUARDS

1.Read Instructions- All the safety and operating instructions should be read before the appliance is operated.

2.Retain Instructions- The safety and operating instructions should be retained for future reference.

3.Heed Warnings- All warnings on the appliance and in the operating instructions should be adhered to.

4.Follow Instructions- All operating and use instructions should be followed.

5.Cleaning- Unplug this video product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.

EXCEPTION: A product that is meant for uninterrupted service and, that for some specific reason, such as the possibility of the loss of an authorization code for a CATV converter, is not intended to be unplugged by the user for cleaning or any other purpose, may exclude the reference to unplugging the appliance in the cleaning description otherwise required in item 5.

6.Attachments- Do not use attachments not recommended by the video product manufacturer as they may cause hazards.

7.Water and Moisture- Do not use this video product near water, for example, near a bath tub, wash bowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, and the like.

8.Accessories- Do not place this video product on an unstable cart, stand, tripod, bracket, or table.The video product may fall, causing

serious injury to a child or adult, and serious damage to the

appliance. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the video product. Any mounting of the appliance should follow

the manufacturer's instructions and should use a mounting accessory recommended by the manufacturer. An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may

cause the appliance and cart combination to overturn.

9.Ventilation- Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the video product and to protect it from overheating, and these openings must not be blocked or covered.The openings should never be blocked by placing the video product on a bed, sofa, rug, or other similar surface.This video product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer's instructions have been adhered to .

10.Power Sources- This video product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your appliance dealer or local power company. For products intended to operate from battery power, or other sources, refer to the operating instructions.

11.Grounding or Polarization- This video product is equipped with a polarized alternating-current line plug (a plug having one blade wider than the other).This plug will fit into the power outlet only one way.This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.

12.Power Cord Protection- Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance.

13.Outdoor Antenna Grounding- If an outside antenna or cable system is connected to the video product, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA No. 70, provides information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. (Fig. A)

FIGURE A

EXAMPLE OF ANTENNA GROUNDING

ANTENNA

LEAD

AS PER NATIONAL ELECTRICAL CODE

WIRE

GROUND

 

CLAMP

 

 

ANTENNA

 

DISCHARGE UNIT

 

(NEC SECTION 810-20)

ELECTRIC

 

SERVICE

 

EQUIPMENT

GROUNDING CONDUCTORS

 

(NEC SECTION 810-21)

 

GROUND CLAMP

NEC – NATIONAL ELECTRICAL CODE

POWER SERVICE GROUNDING

S2898A

ELECTRODE SYSTEM

 

(NEC ART 250, PART H)

14.Lightning- For added protection for this video product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system.This will prevent damage to the video product due to lightning and power-line surges.

15.Power Lines- An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits.When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.

16.Overloading- Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock.

17.Object and Liquid Entry- Never push objects of any kind into this video product through any openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the video product.

18.Servicing- Do not attempt to service this video product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

19.Damage Requiring Service- Unplug this video product from the wall outlet and refer servicing to qualified service personnel under the following conditions:

a.When the power-supply cord or plug is damaged.

b.If liquid has been spilled, or objects have fallen into the video product.

c.If the video product has been exposed to rain or water.

d.If the video product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the video product to its normal operation.

e.If the video product has been dropped or damaged in any way.

f.When the video product exhibits a distinct change in performance-this indicates a need for service.

20.Replacement Parts- When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock or other hazards.

21.Safety Check- Upon completion of any service or repairs to this video product, ask the service technician to perform safety checks to determine that the video product is in proper operating condition.

22.Heat- This video product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat.

IMPORTANT

SAFEGUARDS

PRECAUTIONS

 

DESCRIPTION

OF CONTROLS

PREPARATION

FOR USE

SETUP

 

PLAYBACK

FUNCTION

RECORDING

FUNCTION

SPECIAL

FEATURES

TROUBLESHOOTING

GUIDE

SPECIFICATIONS

MAINTENANCE

WARRANTY

 

INSTRUCCIONES

EN ESPAÑOL

 

PRECAUTIONS

CONTROLS OF

DESCRIPTION

PRECAUTIONS

INSTALL LOCATION

For safety and optimum performance of your VCR:

Install the VCR in a horizontal and stable position. Do not place anything directly on top of the VCR. Do not place the VCR directly on top of the TV.

Shield it from direct sunlight and keep it away from sources of intense heat. Avoid dusty or humid places. Avoid places with insufficient ventilation for proper heat dissipation. Do not block the ventilation holes on the sides of the VCR. Avoid locations subject to strong vibration or strong magnetic fields.

AVOID THE HAZARDS OF

ELECTRICAL SHOCK AND FIRE

Do not handle the power cord with wet hands.

Do not pull on the power cord when disconnecting it from AC wall outlet. Grasp it by the plug.

If, by accident, water is spilled on your VCR, unplug the power cord immediately and take the unit to our Authorized Service Center for servicing.

Do not put your fingers or objects into the VCR cassette holder.

MOISTURE CONDENSATION WARNING

Moisture condensation may occur inside the unit when it is moved from a cold place to a warm place, or after heating a cold room or under conditions of high humidity. Do not use the VCR at least for 2 hours until its inside is dry.

FCC WARNING

This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made.

IMPORTANT COPYRIGHT INFORMATION

Unauthorized recording or use of broadcast television programming, video tape, film or other copyrighted material may violate applicable copyright laws. We assume no responsibility for the unauthorized duplication, use, or other acts which infringe upon the rights of copyright owners.

A NOTE ABOUT RECYCLING

This product's packaging materials are recyclable and can be reused. Please dispose of any materials in accordance with your local recycling regulations. Batteries should never be thrown away or incinerated but disposed of in accordance with your local regulations concerning chemical wastes.

Note to the Cable TV System Installer:

This reminder is provided to call the Cable TV system installer’s attention to Article 820-40 of the National Electrical Code, which provides guidelines for proper grounding – in particular, specifying that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as possible.

CAUTION:

TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

ATTENTION:

POUR ÉVITER LES CHOC ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU’AU FOND.

DESCRIPTION OF CONTROLS

Front Panel

 

 

 

1

 

 

 

2 3

4

5

6

 

 

 

 

 

 

 

 

PLAY

 

 

 

 

 

 

 

 

 

REW

 

F.FWD

 

 

 

 

 

 

 

 

REC/OTR

STOP /EJECT

PAUSE/STILL

 

 

 

 

 

 

 

 

 

 

 

POWER VCR/TV

 

 

 

 

TAPE SPEED

CHANNEL

 

 

 

 

 

POWER

VCR/TV

TAPE IN

TIMER

REC

 

 

 

MENU

 

 

 

 

 

 

 

 

 

14 13

12

 

11

 

10

9

8

 

7

 

1. Cassette Compartment

9. CHANNEL (

) buttons

2. STOP/EJECT button

 

10. TAPE SPEED button

3. REW button

 

 

 

 

11. Display Window

 

 

4. PLAY button

 

 

 

 

 

 

12. Remote Sensor

 

 

5. F.FWD button

 

 

 

 

 

 

13. VCR/TV button

 

 

6. PAUSE/STILL button

 

 

 

 

14. POWER button

 

 

7. MENU button

 

 

 

 

 

 

 

 

 

 

8. REC/OTR button

 

 

 

 

 

 

 

 

 

 

 

 

 

Display Window

POWER

VCR/TV

TAPE IN TIMER

REC

 

 

 

 

15

16

17

18

19

 

15. POWER indicator

 

18. TIMER indicator

 

16. VCR/TV indicator

 

19. REC indicator

 

17. TAPE IN indicator

 

 

 

 

 

Rear Panel

 

 

 

 

 

 

 

20

 

 

 

 

 

2122

23

 

 

 

 

 

 

 

ANT

 

 

 

 

 

 

 

IN

 

 

 

 

 

 

AUDIO

 

 

 

 

 

 

 

OUT IN

OUT

 

 

 

 

 

 

VIDEO CH3 CH4

 

 

 

 

 

 

 

24 2526 27

20. AC Power Cord

 

24. VIDEO OUT jack

 

21. AUDIO OUT jack

 

25. VIDEO IN jack

 

22. AUDIO IN jack

 

26. CH3/CH4 selector switch

23. ANT. IN jack

 

27. ANT. OUT jack

 

Remote Control

 

 

 

 

 

 

 

 

 

 

1. POWER button

 

 

 

 

 

 

2. NUMBER buttons

POWER

 

VCR/TV EJECT

17

3. MENU button

 

1

 

 

4. DISPLAY button

 

1

2

3

16

 

4

5

6 CHANNEL

15

5. TAPE SPEED button

6. REW button

 

2

 

 

 

 

 

7

8

9

 

 

7. STOP button

 

 

 

 

14

 

MENU

0

+100 AUTO REPEAT

8. RECORD button

3

 

 

13

9. PAUSE/STILL button

DISPLAY SPEED EXIT COUNTER

4

 

 

12

10. F.FWD button

 

5

 

RESET MEMORY

11

 

 

PLAY

11. PLAY button

 

 

F.FWD

 

 

 

REW

 

 

 

12. COUNTER/MEMORYbutton

6

 

 

10

7

 

 

 

 

13. EXIT/RESET button

RECORD

 

STOP PAUSE/STILL

 

9

14. AUTO REPEAT button

8

 

 

 

15. CHANNEL (

) buttons

 

 

 

 

 

16. VCR/TV button

17. EJECT button

To insert the batteries

Install two AA batteries matching the polarity indicated inside the battery compartment.

– 2 –

EN

+ 6 hidden pages