FUNAI F20LCTE User Manual

LCD TELEVISION

Owner’s Manual

(STAND TYPE)

IF YOU NEED ADDITIONAL ASSISTANCE FOR SET-UP OR OPERATING AFTER READING OWNER’S MANUAL, PLEASE CALL TOLL FREE 1-800-605-8453 OR VISIT OUR WEB SITE AT http://www.funai.us.

F20LCTE F20LCTE-A

ENGLISH

- 2 - EN

IMPORTANT SAFEGUARDS

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT.

THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING AND MAINTENANCE INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE APPLIANCE.

The important note is located on the rear of the cabinet.

1. Read instructions-All the safety and operating instructions should be read before the appliance is operated.

2. Retain Instructions-The safety and operating instructions should be retained for future reference.

3. Heed Warnings-All warnings on the appliance and in the operating instructions should be adhered to.

4. Follow Instructions-All operating and use instructions should be followed.

5. Cleaning-Unplug TV from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. EXCEPTION: A product that is meant for uninterrupted service and that for some specific reason, such as the possibility of the loss of an authorization code for a CATV converter, is not intended to be unplugged by the user for cleaning or any other purpose, may exclude the reference to unplugging the appliance in the cleaning description otherwise required in item 5.

6. Attachments-Do not use attachments not recommended by the TV manufacturer as they may cause hazards.

7. Water and Moisture-Do not use this TVnear water, for example, near a bath tub, wash bowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, and the like.

8. Accessories-Do not place this TV on an unstable cart, stand, tripod, bracket, or table. The TV may fall, causing serious injury to someone, and serious damage to the appliance. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the TV. Any mounting of the appliance should follow the manufacturer’s instructions and should use a mounting accessory recommended by the manufacturer. An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn.

9. Ventilation-Slots and openings in the cabinet and the back or bottom are provided for ventilation and to ensure reliable operation of the TV and to protect it from overheating, these openings must not be blocked or covered. The openings should never be blocked by placing the TV on a bed, sofa, rug, or other similar surface. This TV should never be placed near or over a radiator or heat register. This TV should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instructions have been adhered to.

10.Power Sources-This TV should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your appliance dealer or local power company. For TVs intended to operate from battery power, or other sources, refer to the operating instructions.

11. Grounding or Polarization-This TV is equipped with a polarized alternating-current line plug(a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.

12.Power-Cord Protection-Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance.

PORTABLE CART WARNING

S3126A

- 3 - EN

FIGURE A

EXAMPLE OF ANTENNA GROUNDING AS PER

NATIONAL ELECTRICAL CODE

ELECTRIC SERVICE EQUIPMENT

GROUND CLAMP

NEC - NATIONAL ELECTRICAL CODE POWER SERVICE GROUNDING

ELECTRODE SYSTEM (NEC ART 250, PART H)

S2898A

GROUND CLAMPS

GROUNDING CONDUCTORS (NEC SECTION 810-21)

ANTENNA DISCHARGE UNIT (NEC SECTION 810-20)

ANTENNA LEAD IN WIRE

13.Outdoor Antenna grounding-If an outside antenna or cable system is connected to the TV, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA No. 70, provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. (Fig. A)

14.Lightning-For added protection for this TV receiver during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the TV due to lightning and power-line surges.

15.Power Lines-An outside antenna system should not be located in the vicinity of overhead power lines or other electric light of power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.

16.Overloading-Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock.

17.Object and Liquid Entry-Never push objects of any kind into this TV through openings as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the TV.

18.Servicing-Do not attempt to service this TV yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

19.Damage Requiring Service-Unplug this TV from the wall outlet and refer servicing to qualified service personnel under the following conditions:

a. When the power supply cord or plug is damaged or

frayed.

b. If liquid has been spilled, or objects have fallen into

the TV.

c. If the TV has been exposed to rain or water. d. If the TV does not operate normally by following the

operating instructions. Adjust only those controls that are covered by the operating instructions, as improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the TV to its normal operation.

e. If the TV has been dropped or damaged in any way.

f. When the TV exhibits a distinct change in

performance-this indicates a need for service.

20.Replacement Parts-When replacement parts are required, be sure the service technician uses replacement parts specified by the manufacturer that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, injury to persons or other hazards.

21.Safety Check-Upon completion of any service or repairs to this TV, ask the service technician to perform routine safety checks to determine that the TV is in proper operating condition.

22.Heat-This TV product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat.

ENGLISH

- 4 - EN

PRECAUTIONS

LOCATION

For safe operation and satisfactory performance of your TV, keep the following in mind when selecting a place for its installation:

●

Place your TV in a room with adequate ventilation.

●

Keep your TV set away from sources of direct heat, such as heat registers or direct sunlight.

●

Do not place your TV on soft surfaces, such as rugs or blankets.

●

Leave enough room for air to circulate around the bottom, top and back of the TV set.

●

To prevent fire, never place any type of candle or flames on the top or near the TV set.

●

To prevent fire or shock hazard, do not expose this product to dripping or splashing. No objects filled with liquids, such as vases, should be placed on the product.

FCC WARNING- This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made.

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT AND FULLY INSERT.

MAINTENANCE

SUPPLIED ACCESSORIES

●

Wipe the front panel and other exterior surfaces of the TV with a soft cloth immersed in lukewarm water and wrung dry.

●

Never use a solvent or alcohol. Do not spray insecticide liquid near the TV. Such chemicals may cause damage and discoloration to the exposed surfaces.

POWER

INPUT SELECT

DISPLAY SLEEP

MUTE CH RETURN

VOL

123

456

789

MENU0+100

Remote control unit (NE308UD)

Batteries (“AA” x 2)

Owner’s Manual (1EMN20182)

CABINET CLEANING

If the liquid crystal display panel should require cleaning, wipe it with a cotton or soft cloth. Before cleaning the picture screen, disconnect the power cord.

PICTURE SCREEN CLEANING

This product utilizes tin-lead solder, and fluorescent lamp containing a small amount of mercury. Disposal of these materials may be regulated due to environmental considerations. For disposal or recycling information, please contact your local authorities or the Electronic Industries Alliance: www.eia.org

The LCD panel used in this product is made of glass. Therefore, it can break when the product is dropped or applied with impact. Be careful not to be injured by broken glass pieces in case the LCD panel breaks.

The LCD panel is a very high technology product with 921,600 thin film transistors, giving you fine picture details. Occasionally, a few non-active pixels may appear on the screen as a fixed point of blue, green or red. Please note that this does not affect the performance of your product.

- 5 - EN

TABLE OF CONTENTS

C IMPORTANT SAFEGUARDS . . . . . . . . . . .2

C PRECAUTIONS . . . . . . . . . . . . . . . . . . . . .4

LOCATION . . . . . . . . . . . . . . . . . . . . . . . . .4

C MAINTENANCE . . . . . . . . . . . . . . . . . . . . .4

CABINET CLEANING . . . . . . . . . . . . . . . . .4

PICTURE SCREEN CLEANING . . . . . . . . .4

C SUPPLIED ACCESSORIES . . . . . . . . . . . .4

C FEATURES . . . . . . . . . . . . . . . . . . . . . . . . .5

OPERATING CONTROLS AND FUNCTIONS

C PREPARATION FOR USE . . . . . . . . . . . . .8

ANTENNA/CABLE CONNECTIONS . . . . . .8

C SET UP FOR USE . . . . . . . . . . . . . . . . . . .9

LANGUAGE SELECTION . . . . . . . . . . . . . .9

CHANNEL PRESETTING . . . . . . . . . . . . . .9

C OPERATIONS . . . . . . . . . . . . . . . . . . . . .10

WATCHING A TV PROGRAM . . . . . . . . . .10

SETTING THE SLEEP TIMER . . . . . . . . .10

CLOSED CAPTION . . . . . . . . . . . . . . . . .10

PICTURE ADJUSTMENT . . . . . . . . . . . . .11

BACK LIGHT SELECTION . . . . . . . . . . . .11

MTS (Multi-Channel Television Sound)

SYSTEM . . . . . . . . . . . . . . . . . . . . . . . . . .11

V-CHIP SET UP . . . . . . . . . . . . . . . . . . . .12

C TROUBLESHOOTING GUIDE . . . . . . . . .14

C SPECIFICATIONS . . . . . . . . . . . . . . . . . .15

C WARRANTY . . . . . . . . . . . . . . . . . . . . . . .16

FEATURES

●

MTS/SAP Tuner

●

181 Channel Selection- All VHF/UHF channels plus up to 125 cable channels.

●

PLL Frequency Synthesized Tuning- The latest PLL frequency synthesized electronic tuning system provides free and easy channel selection and lets you tune directly to any channel using the channel number buttons (0~9 and +100-key) on the remote control.

●

On-Screen Function Display

●

Full-Function Remote Control

●

Sleep Timer

●

Closed Caption Decoder- You may view specially labeled (cc) TV programs, movies, news, prerecorded tapes, etc. with either a dialogue caption or text display added to the program.

●

Auto Shut Off Function- If there is no signal input from the antenna terminal and no user operation for 15 minutes, the TV will turn itself off automatically.

●

V-CHIP- Enables parents to prevent their children from watching inappropriate material on TV.

●

S-VIDEO Input- allows you to get better picture detail and clarity for the playback of S-VHS VCR tapes, Video Discs, Satellite System, Video Game or Video Cameras.

●

Component Input

The serial number of this product may be found on the back of the TV. No others have the same serial number as yours. You should record the number and other vital information here and retain this book as a permanent record of your purchase to aid identification in case of theft.

ENGLISH

Date of Purchase Dealer Purchase from Dealer Address

Dealer Phone No. Model No. Serial No.

OPERATING CONTROLS AND FUNCTIONS

- 6 - EN

- 7 - EN

- REMOTE CONTROL -

POWER

INPUT

SELECT

DISPLAY SLEEP

MUTE CH RETURN

VOL

123

456

789

+100

4 5

3. Channel number button- Press to select

desired channels. Remember to press “0” before a single digit channel.

+100 button- Press to select cable channels

higher than 99.

4. MENU button- Press to display the set up menu on the TV screen.

5. MUTE button- Press to turn off the sound (Volume level display changes LIGHT RED from LIGHT BLUE). Press it again or press VOLnor mto restore sound.

6. VOL nn/mmbuttons- Press to ajust the volume level. Press VOLmto determine the setting mode from the set up menu.

Press to select or adjust a menu item.

7. DISPLAY button- Press to display the channel number and TV sound mode on the screen. The channel number will disappear by pressing it again.

8. SLEEP button- Press to set the sleep timer and start it.

9. CH RETURN button- Press to go back to the previously viewed channel. Press it again to return to the present channel.

10. CH ▼/▲ buttons- Press to select desired channels.

Press to select or ajust a menu item.

BATTERY PRECAUTIONS

• Be sure to follow the correct polarity as indicated in the battery compartment. Reversed batteries may cause damage to the device.

•

Do not mix different types of batteries together (e.g. Alkaline and Carbon-Zinc) or old batteries with fresh ones.

• If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from possible battery leakage.

• Do not try to recharge batteries not intended to be recharged; they can overheat and rupture.

ENGLISH

1. POWER button- Press to turn the TV ON and

OFF.

2. INPUT SELECT button- Press to select TV or video input mode (VIDEO1 or VIDEO2).

Remove the battery compartment cover on the remote unit by sliding it while slightly twisting.

Insert 2 “AA” penlight batteries into battery compartment in the direction as indicated by the polarity (+ / -) markings.

Replace the cover.

Push the cover on its top side until it clicks in order to fit the cover completely to the compartment.

[INSTALLING THE BATTERIES]

- 8 - EN

PREPARATION FOR USE

ANTENNA/CABLE CONNECTIONS

USING AUDIO/VIDEO INPUT JACKS

When you use the AUDIO/VIDEO input jacks, select “VIDEO1” or “VIDEO2” mode by pressing INPUT SELECT on the remote control or SELECT on the front panel on the TV.

•To use the jacks of AV-IN1 on the TV, select

“VIDEO1”.

•To use the jacks of AV-IN2 on the TV, select

“VIDEO2”.

Note:

• When you use the S-VIDEO connection,

S-VIDEO jack is given priority over the VIDEO jack.

The tuner scans and memorizes all active channels in your area.

● The TV distinguishes between standard TV

channels and cable (CATV) channels.

● When AUTO PRESET CH action is completed,

the lowest memorized channel reappears on the screen. When there is no signal to ANT in jack, “NO TV SIGNAL” will appear. In this case, please check the antenna connections, then try the auto preset again.

● When you press CH ▼or▲ after selecting

“AUTO PRESET CH”, the tuner will stop at the memorized channels only.

● The TV may memorize TVchannels as CATV

channels if the reception conditions are poor. If this happens, try AUTO PRESET CH action again when reception conditions are better.

ADD/DELETE FUNCTION

Press MENU so that the set up menu appears on the TV screen.

Press CH ▼or▲ to point to “CHANNEL SET UP”. Then press VOL ▲.

Press VOL ▲ to select “ADD/DELETE CH”.

Use CH ▼or▲ to select the channel you wish to put into memory or to erase from memory.

●

Press VOL ▲ to highlight the channel number in LIGHT BLUE if you wish to add the channel into memory.

●

Press VOL ▲ to highlight the channel number in LIGHT RED if you wish to erase the channel from memory.

Press MENU to exit.

To preset a channel or to change a preset channel, follow the procedure below.

Press POWER to turn on the TV. Press MENU so that the set up menu appears on

the TV screen. Press the CH ▼or ▲ to point to “CHANNEL

SET UP”. Then press VOL ▲.

Press

CH ▼or ▲ to point to “AUTO PRESET

CH”. Then press VOL ▲.

If you want to change the language of the on-screen menu, follow the procedure below.

Connect antenna or cable first, then connect the power cord to a standard AC outlet.

Note: If some digits appear in the corner of the screen, press POWER without unplugging the power cord.

Press POWER to turn on the TV. Press MENU so that the set up menu appears on

the TV screen.

Press CH ▼or▲ to point to “LANGUAGE”. Select [ENGLISH], [ESPAÑOL] or

[FRANÇAIS] by using the VOL ▼ or▲.

Press MENU to exit.

- 9 - EN

SET UP FOR USE

LANGUAGE SELECTION

CHANNEL PRESETTING

ENGLISH

- TV SET UP -

PICTURE CHANNEL SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] TV SOUND [MAIN] BACK LIGHT [BRIGHT]

- TV SET UP -

PICTURE CHANNEL SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] TV SOUND [MAIN] BACK LIGHT [BRIGHT]

- CHANNEL SET UP -

ADD/DELETE CH (TV)

AUTO PRESET CH

- TV SET UP -

PICTURE CHANNEL SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] TV SOUND [MAIN] BACK LIGHT [BRIGHT]

- CHANNEL SET UP -

ADD/DELETE CH (TV)

AUTO PRESET CH

- TV SET UP -

PICTURE CHANNEL SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] TV SOUND [MAIN] BACK LIGHT [BRIGHT]

CAPTION MODE

1) Closed Caption Characters can be displayed on the TV screen only when the received broadcast signal contains Caption Signals.

Paint-on mode:

Displays input characters on the screen immediately.

Pop-on mode: Once characters are stored in

memory, they are displayed all at once.

Roll-up mode: Displays the characters

continuously by scrolling (max. 4 lines).

Note: If [CAPTION1] or [CAPTION2] is selected but a Closed Caption signal is not included, characters will not be displayed.

TEXT MODE

1) Displays the text on the screen by scrolling (max. 7 lines).

2) If the received broadcast signal does not contain caption or text signals, no change will occur.

Notes:

•When your TV receives a special effects playback signal (i.e., Search, Slow and Still) from a VCR’s video output channel (CH3 or CH4), your TV may not display the correct caption or text.

• Captions and texts may not match the TVvoice exactly.

• Interference may cause the closed caption system not to function properly.

• The caption or text characters will not be displayed while the menu display or functions display is shown.

If you see this screen:

If your TV displays a black box on the screen, this means that your TV is set to TEXTmode. To clear screen, select [CAPTION1], [CAPTION2] or [OFF].

The sleep timer function allows you to have the POWER automatically turn off after a set time period.

Press

POWER to turn on the TV and press SLEEP on the remote control .

You may change the sleep time by pressing SLEEP on the remote control repeatedly. The timer can be set up to 90 minutes. Each time SLEEP is pressed the time increases by 10 minutes. (The timer display counts up and sleep timer will be displayed on the screen when you press SLEEP on the remote control).

Note: When you disconnect the unit from the AC outlet or when you have a power failure, the sleep time will be lost.

TO CANCEL THE SLEEP TIMER

Press SLEEP repeatedly until “SLEEP 0 MINUTE” is displayed.

- 10 - EN

OPERATIONS

: Press VOL ▼ or▲.

- TV SET UP -

PICTURE CHANNEL SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] TV SOUND [MAIN] BACK LIGHT [BRIGHT]

- TV SET UP -

PICTURE CHANNEL SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [

CAPTION1

] TV SOUND [MAIN] BACK LIGHT [BRIGHT]

- TV SET UP -

PICTURE CHANNEL SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [

CAPTION2

] TV SOUND [MAIN] BACK LIGHT [BRIGHT]

- TV SET UP -

PICTURE CHANNEL SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [TEXT1] TV SOUND [MAIN] BACK LIGHT [BRIGHT]

- TV SET UP -

PICTURE CHANNEL SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [TEXT2] TV SOUND [MAIN] BACK LIGHT [BRIGHT]

WATCHING A TV PROGRAM

Press POWER to turn on the TV. Select the desired channel with CH ▼or ▲. Adjust the volume to the desired listening level

using

VOL ▼ or▲.

Adjust picture controls for a natural looking image. (See “PICTURE ADJUSTMENT”.)

This TV can receive Caption and Text.

CLOSED CAPTION SELECTION

You may view specially labeled (cc) TV programs, movies, news and prerecorded tapes, etc. with either a dialogue caption or text display added to the program.

Press MENU so that the set up menu appears on the TV screen.

Press the CH ▼or ▲ to point to “CAPTION”. Press VOL ▼or▲ to select the mode you wish. When done, press MENU to exit.

SETTING THE SLEEP TIMER

CLOSED CAPTION

SLEEP 10 MINUTE

TO SELECT STEREO, MONO OR SAP IN STEREO BROADCAST

Press MENU so that the set up menu appears on the TV screen.

Press the CH ▼or ▲ to point to “TVSOUND”. Press the VOL ▼ or▲ to select your desired

stereo mode. ([MAIN], [MONO] or [SAP])

You can listen to a TV program in MTS stereo. To show the following status, press DISPLAY on the remote control.

Press

MENU so that the set up menu appears on

the TV screen. Press

CH ▼or ▲ to point “PICTURE”. Then

press VOL ▲.

Select the feature you wish to adjust with CH ▼ or▲ and adjust it with VOL ▼or▲.

Note:

●

In the above steps, the picture adjustment display will disappear from the TV screen automatically after about 10 seconds if you do not press any buttons. Press MENU and VOL ▲ so that “PICTURE” is selected. Press CH ▼or ▲ repeatedly until the menu disappears.

- 11 - EN

BRIGHTNESS

+ -

CONTRAST

+ -

COLOR

TINT

SHARPNESS

- TV SET UP -

PICTURE CHANNEL SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] TV SOUND [MAIN] BACK LIGHT [BRIGHT]

- TV SET UP -

PICTURE CHANNEL SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] TV SOUND [MAIN] BACK LIGHT [NORMAL]

- TV SET UP -

PICTURE CHANNEL SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] TV SOUND [MAIN] BACK LIGHT [DARK]

: Press VOL ▼ or▲.

SAP: Second Audio Program, which means your program, can also be received in a second language or sometimes a radio station.

Typ e of

broadcast

Regular

-None-

ST ER EO

SAP

Selection

MAIN

MONO

SAP

-None- -None-

MONO

ST ER EO

SAP

MAIN

Stereo

broadcast

: Press VOL ▼ or▲.

- TV SET UP -

PICTURE CHANNEL SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] TV SOUND [MAIN] BACK LIGHT [BRIGHT]

- TV SET UP -

PICTURE CHANNEL SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] TV SOUND [MONO] BACK LIGHT [BRIGHT]

- TV SET UP -

PICTURE CHANNEL SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] TV SOUND [SAP] BACK LIGHT [BRIGHT]

PICTURE ADJUSTMENT

MTS (Multi-Channel Television

Sound) SYSTEM

Press MENU so that the set up menu appears on the TV screen.

Press CH ▼or▲ to point to “BACK LIGHT”. Press the VOL ▼ or▲ to select the mode you

wish. When done, press MENU to exit.

BACK LIGHT SELECTION

BRIGHTNESS CONTRAST COLOR TINT SHARPNESS

VOL

to decrease brightness to increase brightness to decrease contrast to increase contrast to pale to brilliant to purple to green to soft to clear

: Press CH ▼or ▲.

ENGLISH

OPERATIONS (Continued)

- 12 - EN

TV RATING SET UP

Press MENU so that the set up menu appears on the TV screen. Press CH ▼or▲ to point to “V-CHIP SET UP”. Then press VOL ▲.

Use the number buttons to enter 4-digit access code. The default access code is 0000. If you have not set up your personal access code, you should use 0000.

Press CH ▼or▲ to point to “TV RATING”. Then press VOL ▲.

Press the CH ▼or ▲ to point to your desired item. Then press VOL ▲ to select [BLOCK] or [VIEW].

● When you select the rating category and set it to

[BLOCK], the higher rating will change to [BLOCK] automatically. Also, the lower rating will change to [VIEW] automatically.

● When you set “TV-Y” to [BLOCK] or [VIEW],

then all ratings will change to [BLOCK] or [VIEW] automatically.

● When you set “TV-MA” to [VIEW], then all

ratings will change to [VIEW] automatically.

Press MENU to exit.

MPAA RATING SET UP

Press MENU so that the set up menu appears on the TV screen.

Press CH ▼or▲ to point to “V-CHIP SET UP”. Then press VOL ▲ .

Use the number buttons to enter 4-digit access code. The default access code is 0000. If you have not set up your personal access code, you should use 0000.

Press CH ▼or▲ to point to “MPAA RATING”. Then press VOL ▲.

Press CH ▼or▲ to point to your desired item. Then press VOL ▲ to select [BLOCK] or [VIEW].

TV-Y [VIEW] TV-Y7( ) [VIEW]

B TV-G [BLOCK]

TV-PG(DLSV) [BLOCK] TV-14 (DLSV) [BLOCK] TV-MA( LSV) [BLOCK

]

V-CHIP SET UP

G [VIEW] PG [VIEW] PG-13 [VIEW]

B R [BLOCK]

NC-17 [BLOCK] X [BLOCK]

• TV-Y : Appropriate for all children

• TV-Y7: Appropriate for children seven and older

• TV-G : General Audience

• TV-PG: Parental Guidance suggested

• TV-14 : Unsuitable for children under 14

• TV-MA: Mature audience only

V-CHIP enables parents to prevent their children from watching inappropriate material on TV. V-CHIP reads the ratings for programming (except for news and sports programs, unedited movies on premium cable channels and Emergency Broadcast System signals), then denies access to programming if the program’s rating meets or exceeds the limitations you select. In this case, “PROTECTED PROGRAM by ...” message appears on the TV screen.

To block certain ratings, follow the steps below.

● Programming may be rated by the Motion Picture Association of America (MPAA) or according to the

Television Parental Guidelines. In order to block any inappropriate programming, set your limits in both places (MPAA RATING and TV RATING).

● You cannot access the menu when the “PROTECTED PROGRAM by ...” message appears. In this case,

change to an unblocked channel, then press

MENU.

- TV SET UP -

PICTURE CHANNEL SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] TV SOUND [MAIN] BACK LIGHT [BRIGHT]

ACCESS CODE

_ _ _ _

- V-CHIP SET UP -

TV RATING MPAA RATING CHANGE CODE

ACCESS CODE

_ _ _ _

- V-CHIP SET UP -

TV RATING MPAA RATING CHANGE CODE

Note: When you select [TV-MA], “D” does not appear on the TV screen.

● The sub-ratings which set to [BLOCK] appear

next to the rating category in the TV RATING menu.

[V-CHIP ACCESS CODE]

To change access code, follow steps.

Press MENU, then press CH ▼or▲ to select VCHIP SET UP. Press VOL ▲ to continue.

Press the number buttons to enter your old access code. If you have never set up your personal access code, use 0000.

Press CH ▼or▲ to select CHANGE CODE. Then press VOL ▲ to continue.

Use the number buttons to enter your desired access code in the NEW CODE space. Then enter the same code in the CONFIRM CODE space. Your new access code is set. You will return to the "V-CHIP SET UP".

If the code in the CONFIRM CODE space does not match the code in the NEW CODE space, repeat step 4, making sure you enter the same new code exactly in the CONFIRM CODE space.

Notes:

● If a power failure occurs, the default code, 0000

will be the access code.

● If you connect the power cord to an AC outlet

that is controlled by a wall switch, your personal access code will be erased every time you turn off the power at the wall switch. The default code will return to 0000.

[IF YOU FORGET YOUR ACCESS CODE]

You should restore the access code to 0000 as your access code, unplug the TV’s power cord for 10 seconds, then plug it in again.

● When you select the rating category and set it to

[BLOCK], the higher rating will change to [BLOCK] automatically. Also, the lower rating will change to [VIEW] automatically.

● When you set “G” to [BLOCK] or [VIEW], then

all ratings will change to [BLOCK] or [VIEW] automatically.

● When you set “X” to [VIEW], then all ratings

will change to [VIEW] automatically.

Press MENU to exit.

V-CHIP SET UP SUB RATINGS

When you select TV-Y7, TV-PG, TV-14 or TV-MA and you press VOL ▲, the sub-ratings will appear on the TV screen. If you select the rating category (example: TV-PG) and set it to [BLOCK] or [VIEW], the sub-ratings (example: V for Violence) will turn to [BLOCK] or [VIEW] automatically. You can set the sub-ratings to [BLOCK] or [VIEW] individually when the rating category is set to [BLOCK]. To set the sub-ratings individually, follow the steps below.

● When you select [TV-Y7]:

Press CH ▼or▲ to select “FV” (Fantasy Violence). Then press VOL ▲ to select [BLOCK] or [VIEW].

● When you select [TV-PG], [TV-14] or

[TV-MA]:

Press CH ▼or▲ to select “D” (Suggestive Dialog), “L” (Coarse Language), “S” (Sexual Situation) or “V” (Violence). Then press VOL ▲ to select [BLOCK] or [VIEW].

- 13 - EN

TV-Y7 [BLOCK]

B FV [BLOCK]

• G : General Audience

• PG: Parental Guidance suggested

• PG-13: Unsuitable for children under 13

• R : Restricted; under 17 requires accompanying parent or adult guardian

• NC-17 : No one under 17 admitted

• X : Mature audience only

ACCESS CODE

_ _ _ _

- V-CHIP SET UP -

TV RATING MPAA RATING CHANGE CODE

ENGLISH

NEW CODE

_ _ _ _

COMFIRM CODE

_ _ _ _

TV-PG

D L S V

[BLOCK]

[BLOCK] [BLOCK] [BLOCK] [BLOCK]

- 14 - EN

TROUBLESHOOTING GUIDE

Sometimes a performance problem can be easily solved by checking seemingly apparent but often overlooked possibilities. Before arranging for service, check these items. It could save your time and money.

QUICK SERVICE CHECK LIST

PROBLEM

POSSIBLE REMEDY

Try a new channel, if OK, then possible station trouble. Is TV plugged in? Power at outlet? Is TV’s POWER button on? Is antenna connected to terminal on the back of the set? If outside antenna is being used, check for broken wire. Check for local interference. Turn off with POWER button and then turn it on after about a minute. Adjust COLOR control. Adjust CONTRAST & BRIGHT control. Check batteries in Remote Control. Move the TV away from the nearby appliances which have Magnetism. Turn off using the POWER button, then turn it on again 30 minutes later or so. Temperature around is too low. Life of the Back Light is approximately 50,000 hours. Ask the Service Center to replace. It is quality of the LCD Panel.

Remote Control Doesn’t Work

Bars On Screen

Picture Distorted

Picture Rolls Vertically

No Color

Poor Reception on Some Channels

Weak Picture

Lines or Streaks in Picture

Ghosts in picture

Picture Blurred

Sound OK, Picture Poor

Picture OK, Sound Poor

No Picture or Sound

Different color marks on screen

Black or Luminous point on Screen

Closed Caption Problem Possible Remedy

My TV is showing captions that are misspelled.

My TV will not show the text in its entirety or there is a delay of what is being said.

My captions are scrambled with white boxes on the TV screen.

My program guide listed a TV show as being closed captioned but none of the captions were displayed.

My prerecorded videotape does not show any captions. The tape box mentions it being closed captioned.

My TV screen shows a black box on certain channels.

You are watching a live broadcast and spelling errors made by the closed captioning production company may pass through uncorrected. A prerecorded program will not show any misspelled words because of the normal time available for editing the captions.

Captions that are delayed a few seconds behind the actual dialogue are common for live broadcasts. Most captioning production companies can display a dialogue to a maximum of 220 words per minute. If a dialogue exceeds that rate, selective editing is used to insure that the captions remain up-to-date with the current TV screen dialogue.

Interference caused by building, power lines, thunderstorms, etc. may cause scrambled or incomplete captions to appear.

Broadcasters may at times use a time compression process to the actual program so that additional advertising time can be given. Since the decoder cannot read the compressed information, captions will be lost.

The videotape was either an illegal copy or the tape duplicating company accidentally left out the captioning signals during the copying process.

You are in the TEXT mode. Select CAPTION mode or CAPTION [OFF].

The LCD panel is manufactured to provide many years of useful life. Occasionally a few non active pixels may appear as a tiny spec of color. This in not to be considered a defect in the LCD screen.

- 15 - EN

SPECIFICATIONS

GENERAL SPECIFICATIONS

Television system: NTSC-M

TV Standard Closed Caption System: §15.119/FCC Channel coverage

VHF: 2 ~ 13 UHF: 14 ~ 69 CATV: 2 ~ 13, A~ W,

W+1 ~ W+84,

A-5 ~ A-1, 5A Tuning System: 181 channel

frequency synthesized

tuning system Channel access: Direct access keyboard,

programmable

scan and up/down Terminals

Antenna input: VHF/UHF/CATV

75 ohm unbalanced (F-type)

S-Video input: Mini DIN 4-pin jack Video input: RCA connector Audio input: RCA connector x 4 Component video input:

One pin jack (Y), 1Vpp (75 ohm)

Two pin jacks (Pr)/(Pb), 700mVpp (75 ohm) Headphone: 1/8” Stereo (3.5 mm) Stereo Sound System 2 speakers 2 ways AV input

ELECTRICAL SPECIFICATIONS

Sound output: 2W, 4 ohm x 4

OTHER SPECIFICATIONS

Remote control: Digital encoded

infrared light system Operating temperature: 5°C to 40°C (41°F~104°F) Power requirements: AC120V, 60Hz Power consumption

(Maximum): 58W LCD: 20”

Dimensions(H x W x D):18-9/16” x 23-5/16” x 8-9/16”

(471 mm x 592 mm x 217 mm) Weight: 19.4 lbs. (8.8 kg) [F20LCTE]

17.2 lbs. (7.8 kg) [F20LCTE-A]

• Designs and specifications are subject to change without notice and without our legal obligation.

• If there is a discrepancy between languages, the default language will be English.

ENGLISH

+ 33 hidden pages