Funai EWC19DA User Manual

Download

Page 1

19-INCH COLOR TV/DVD

EWC19DA

OWNER’S MANUAL

If you need additional assistance for set-up or operating

after reading owner’s manual, please call

TOLL FREE : 1-800-256-2487.

Please read before using this equipment

INSTRUCCIONES EN ESPAÑOL INCLUIDAS.

“EMERSON AND THE G-CLEF LOGO ARE REGISTERED TRADEMARKS

OF EMERSON RADIO CORP., PARSIPPANY, NEW JERSEY, U.S.A.”

TD205.QX33 01.3.3 1:39 PM Page 1

Page 2

1.Read instructions-All the safety and operating instructions

should be read before the appliance is operated.

2.Retain Instructions-The safety and operating instructions

should be retained for future reference.

3.Heed Warnings-All warnings on the appliance and in the

operating instructions should be adhered to.

4.Follow Instructions-All operating and use instructions

should be followed.

5.Cleaning-Unplug TV/DVD from the wall outlet before

cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. EXCEPTION: Aproduct that is meant for uninterrupted service and, that for some specific reason, such as the possibility of the loss of an authorization code for a CATV converter, is not intended to be unplugged by the user for cleaning or any other purpose, may exclude the reference to unplugging the appliance in the cleaning description otherwise required in item 5.

6.Attachments-Do not use attachments not recommended by

the TV/DVD manufacturer as they may cause hazards.

7.Water and Moisture-Do not use this TV/DVD near water-

for example, near a bath tub, wash bowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, and the like.

8.Accessories-Do not place this TV/DVD on an unstable cart,

stand, tripod, bracket, or table. The TV/DVD may fall, causing serious injury to someone, and serious damage to the appliance. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the TV/DVD. Any mounting of the appliance should follow the manufacturer’s instructions and should use a mounting accessory recommended by the manufacturer. An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn.

Accessoires- Ne placez pas cette TV/DVD sur une table roulante, un support, un trépied, une console ou une table instable. Cette TV/DVD risquerait de tomber, pouvant gravement blesser quelqu'un et l'appareil même pourrait être sérieusement endommagé. N'utilisez qu'une table roulante, un support, un trépied, une console ou une table recommandé par le fabriquant, ou vendu avec la TV/DVD. Pour n'importe quelle installation de l'appareil, on devra suivre les instructions du fabriquant et l'on devra utiliser les accessoires d'installation recommandés par le fabriquant. L'ensemble combiné de l'appareil avec une table roulante devra être déplacé avec précaution. Des arrêts brusques, une force excessive et des surfaces inégales peuvent provoquer le renversement de l'ensemble combiné de l'appareil/table roulante.

9.Ventilation-Slots and openings in the cabinet and the back

or bottom are provided for ventilation and to ensure reliable operation of the TV/DVD and to protect it from overheating, and these openings must not be blocked or covered. The openings should never be blocked by placing the TV/DVD on a bed, sofa, rug, or other similar surface. This TV/DVD should never be placed near or over a radiator or heat register. This TV/DVD should not be placed in a builtin installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instructions have been adhered to.

10.Power Sources-This TV/DVD should be operated only

from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your appliance dealer or local power company. For TV/DVDs intended to operate from battery power, or other sources, refer to the operating instructions.

11.Grounding orPolarization-This TV/DVD is equipped

with a polarized alternating-current line plug(a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.

- 2 - EN

1B17

WARNING:TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE

TO RAIN OR MOISTURE.

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT.

THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING AND MAINTENANCE INSTRUCTIONS IN THE LITERATURE ACCOMP ANYING THE APPLIANCE.

The caution marking is located on the rear of the cabinet.

IMPORTANT SAFEGUARDS

TD205.QX33 01.3.3 1:39 PM Page 2

PORTABLE CART WARNING

AVERTISSEMENT POUR UNE

TABLE ROULANTE PORTATIVE

S3126A

Page 3

- 3 - EN

1B17

12.Power-Cord Protection-Power-supply cords should be

routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance.

13.Outdoor Antenna grounding-If an outside antenna or

cable system is connected to the TV/DVD, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA No. 70, provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. (Fig. A)

14.Lightning-For added protection for this TV/DVD receiver

during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the TV/DVD due to lightning and power-line surges.

15.Power Lines-An outside antenna system should not be

located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.

16.Overloading-Do not overload wall outlets and extension

cords as this can result in a risk of fire or electric shock.

17.Object and Liquid Entry-Never push objects of any kind

into this TV/DVD through openings as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the TV/DVD.

18.Servicing-Do not attempt to service this TV/DVD yourself

as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

19.Damage Requiring Service-Unplug this TV/DVD from

the wall outlet and refer servicing to qualified service per-

sonnel under the following conditions: a. When the power-supply cord or plug is damaged or frayed. b. If liquid has been spilled, or objects have fallen into the

TV/DVD. c. If the TV/DVD has been exposed to rain or water. d. If the TV/DVD does not operate normally by following the

operating instructions. Adjust only those controls that are

covered by the operating instructions, as improper adjust-

ment of other controls may result in damage and will often

require extensive work by a qualified technician to restore

the TV/DVD to its normal operation. e. If the TV/DVD has been dropped or damaged in any way. f. When the TV/DVD exhibits a distinct change in perfor-

mance-this indicates a need for service.

20.Replacement Parts-When replacement parts are required,

be sure the service technician has used replacement parts

specified by the manufacturer that have the same character-

istics as the original part. Unauthorized substitutions may

result in fire, electric shock, injury to persons or other haz-

ards.

21.Safety Check-Upon completion of any service or repairs to

this TV/DVD, ask the service technician to perform routine

safety checks to determine that the TV/DVD is in proper

operating condition.

22.Heat-This TV/DVD product should be situated away from

heat sources such as radiators, heat registers, stoves, or

other products (including amplifiers) that produce heat.

TD205.QX33 01.3.3 1:39 PM Page 3

EXAMPLE OF ANTENNA GROUNDING AS PER

NATIONAL ELE CTRICAL CODE

S2898A

FIGURE A

ELECTRIC SERVICE EQUIPMENT

NEC - NATIO NAL EL ECTR ICAL CODE

ANTENNA

LEAD IN WIRE

GROUND

CLAMP

ANTENNA

DISCHARGE UNI T (NEC SECTIO N 810 -20)

GROUNDING CONDUCTORS (NEC SECTIO N 810 -21)

GROUND CL AMPS

POWER SERVICE GRO UNDING ELECTRODE SYSTEM (NEC ART 250, PART H)

Page 4

RADIO-TV INTERFERENCE

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

1) Reorient or relocate the receiving antenna.

2) Increase the separation between the equipment and receiver.

3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

4) Consult the dealer or an experienced radio/TV technician for help.

- 4 - EN

1B17

FCC WARNING- This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made.

PRECAUTIONS

IMPORTANT COPYRIGHT INFORMATION

Unauthorized copying, broadcasting, public performance and lending of discs are prohibited.

LASER SAFETY

This unit employs a laser. Only a qualified service person should remove the cover or attempt to service this device, due to possible eye injury.

CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

CAUTION: VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK DEFEATED. DO NOT STARE INTO BEAM.

LOCATION: INSIDE, NEAR THE DECK MECHANISM.

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

CAUTION: TO PREVENT ELECTRIC SHOCK,

MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

ATTENTION: POUR ÉVITER LES CHOC ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU’AU FOND.

TD205.QX33 01.3.3 1:39 PM Page 4

Page 5

AVOID THE HAZARDS OF

ELECTRICAL SHOCK AND FIRE

- 5 - EN

1B17

LOCATION

For safe operation and satisfactory performance of your TV/DVD, keep the following in mind when selecting a place for its installation:

•

Shield it from direct sunlight and keep it away from sources of intense heat.

•

Avoid dusty or humid places.

•

Avoid places with insufficient ventilation for proper heat dissipation. Do not block the ventilation holes at the top and bottom of the unit. Do not place the unit on a carpet because this will block the ventilation holes.

•

Install unit in a horizontal position.

•

Avoid locations subject to strong vibration.

•

Do not place the TV/DVD near strong magnetic fields.

•

Avoid moving TV/DVD to locations where temperature differences are extreme.

•

Do not handle the power cord with wet hands.

•

Do not pull on the power cord when disconnecting it from an AC wall outlet. Grasp it by the plug.

•

If, by accident, water is spilled on your unit, unplug the power cord immediately and take the unit to our Authorized Service Center for servicing.

•

Do not put your fingers or objects into the TV/DVD disc loading tray.

•

Do not place anything directly on top of the unit.

WARNING

Moisture condensation may occur inside the unit when it is moved from a cold place to a warm place, or after heating a cold room or under conditions of high humidity. If a DVD is played in a TV/DVD which has moisture, it may damage the DVD and TV/DVD. Therefore when the condensation occurs inside the unit, turn the POWER button on and allow at least 2 hours for the unit to dry out.

The serial number of this product may be found on the back of the unit. No other TV/DVD has the same serial number as yours. You should record the number and other vital information here and retain this book as a permanent record of your purchase to aid identification in case of theft. Serial numbers are not kept on file.

Date of Purchase Dealer Purchase from Dealer Address Dealer Phone No. Model No. Serial No.

A NOTE ABOUT RECYCLING

This product’s packaging materials are recyclable and can be reused. Please dispose of any materials in accordance with your local recycling regulations.

Batteries should never be thrown away or incinerated but disposed of in accordance with your local regulations concerning chemical wastes.

TD205.QX33 01.3.3 1:39 PM Page 5

Page 6

- 6 - EN

1B17

TABLE OF CONTENTS

C IMPORTANT SAFEGUARDS . . . . . . . . . . . . .2

C PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . .4

LOCATION . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

AVOID THE HAZARDS OF ELECTRICAL

SHOCK AND FIRE . . . . . . . . . . . . . . . . . . . . . .5

WARNING . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

C FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

C SUPPLIED ACCESSORIES . . . . . . . . . . . . . . .7

C OPERATING CONTROLS AND FUNCTIONS 8

C PREPARATION FOR USE . . . . . . . . . . . . . . .10

ANTENNA/CABLE CONNECTIONS . . . . . . .10

INSTALLING THE BATTERIES . . . . . . . . . . .12

CONNECTING TO EXTERNAL INPUT JACKS .12 CONNECTING TO A STEREO SYSTEM (for DVD)

.13

CONNECTING TO AN AMPLIFIER EQUIPPED WITH DIGITALINPUT JACKS,

MD DECK OR DAT DECK (for DVD) . . . . . .13

CONNECTING TO ADOLBY DIGITAL DECODER OR DTS DECODER (for DVD) . .14

TV SECTION

C SET UP FOR USE . . . . . . . . . . . . . . . . . . . . .15

LANGUAGE SELECTION . . . . . . . . . . . . . . .15

CHANNEL PRESETTING . . . . . . . . . . . . . . .15

C OPERATIONS . . . . . . . . . . . . . . . . . . . . . . . . .16

WATCHING A TV PROGRAM . . . . . . . . . . . .16

SELECTING THE SLEEP TIMER . . . . . . . . .16

CLOSED CAPTION . . . . . . . . . . . . . . . . . . . .16

PICTURE ADJUSTMENT . . . . . . . . . . . . . . . .17

V-CHIP SET UP . . . . . . . . . . . . . . . . . . . . . . . .18

VD SECTION

C ABOUT THE DISCS . . . . . . . . . . . . . . . . . . . .20

PLAYABLE DISCS . . . . . . . . . . . . . . . . . . . . .20

DISC TYPES . . . . . . . . . . . . . . . . . . . . . . . . . .20

SYMBOLS USED IN THIS MANUAL . . . . . .20

C PLAYING ADISC . . . . . . . . . . . . . . . . . . . . . .21

PLA YING ADVD VIDEO OR AN AUDIO CD

.21

USING THE DVD MENUS . . . . . . . . . . . . . . .21

USING THE TITLE MENU . . . . . . . . . . . . . . .22

PAUSING PLAYBACK OR DISPLAYING

A STILL PICTURE . . . . . . . . . . . . . . . . . . . . .22

RESUMING PLAYBACK FROM THE

POINT WHERE PLAYBACK STOPPED . . . .22

STEPPING THROUGH FRAMES . . . . . . . . . .22

FAST FORWARD/REVERSE . . . . . . . . . . . . .23

SLOW MOTION . . . . . . . . . . . . . . . . . . . . . . .23

STARTING FROM A DESIRED TRACK . . . .23

STARTING FROM A DESIRED TIME COUNT

.23

PLAYING FROM ADESIRED TITLE OR

CHAPTER . . . . . . . . . . . . . . . . . . . . . . . . . . . .24

RANDOM (Audio CD) . . . . . . . . . . . . . . . . . .24

REPEAT . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24

A-B REPEAT . . . . . . . . . . . . . . . . . . . . . . . . . .25

PROGRAM (Audio CD) . . . . . . . . . . . . . . . . .25

C SETTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . .26

CHANGING THE AUDIO LANGUAGE OR

SOUND MODE . . . . . . . . . . . . . . . . . . . . . . . .26

CHANGING THE SUBTITLE LANGUAGE . .27 CHANGING THE CAMERA ANGLE

(Multi-Angle Pictures) . . . . . . . . . . . . . . . . . . .27

CHANGING THE ON-SCREEN DISPLAY . . .28

C CHANGING THE SETUP ITEMS . . . . . . . . .29

LANGUAGE SETTINGS . . . . . . . . . . . . . . . .29

VIDEO SETTINGS . . . . . . . . . . . . . . . . . . . . .30

AUDIO SETTINGS . . . . . . . . . . . . . . . . . . . . .30

PARENTAL LOCK . . . . . . . . . . . . . . . . . . . . .31

OTHER SETTINGS . . . . . . . . . . . . . . . . . . . . .32

C LANGUAGE CODE LIST . . . . . . . . . . . . . . . .33

C TROUBLESHOOTING GUIDE . . . . . . . . . . .34

C MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . .37

DISC HANDLING . . . . . . . . . . . . . . . . . . . . . .37

C SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . .38

C WARRANTY . . . . . . . . . . . . . . . . . . .Back Cover

TD205.QX33 01.3.3 1:39 PM Page 6

Page 7

- 7 - EN

1B17

FEATURES

•

Tinted, Bright Black Matrix Picture Tube

•

181 Channel Selection– All VHF/UHF channels

plus up to 125 cable channels.

•

PLL Frequency Synthesized Tuning– The latest

PLL frequency synthesized electronic tuning system provides free and easy channel selection, and lets you tune directly to any channel using the channel number buttons (0~9 and +100-key) on the remote control.

•

On-Screen Function Display.

•

Full-Function Remote Control

•

Sleep Timer

•

Closed Caption Decoder– You may view special-

ly labeled (cc) TV programs, movies, news, prerecorded tapes, etc. with either a dialogue caption or text display added to the program.

•

Auto Shut Off Function– If there is no air signal

input from the antenna terminal and no operation for 15 minutes, the TV will turn itself off automatically.

•

V-CHIP– Enables parents to prevent their children

from watching inappropriate material on TV.

•

Dolby Digital sound– This player can handle

Dolby Digital surround sound having 5.1 channels when connected to a Dolby Digital decoder.

•

Still/fast/slow/step playback– Various playback

modes are available including still pictures, fast forward/reverse, slow motion and step frames.

•

Random playback for audio CD– This player can

shuffle the order of tracks to play them in random order.

•

Program playback for audio CD– You can pro-

gram the order of tracks to play them in any desired order.

•

DVD menus in a desired language– You can dis-

play DVD menus in a desired language, if available on a DVD.

•

Screen saver and auto power-off functions–

Screen saver is automatically activated when there is no input from the player or the remote control for one minute in stop mode. The power is automatically turned off when there is no input for 31 minutes in still or stop mode.

•

Subtitles in a desired language– You can select a

desired language for the display subtitles, if that language is available on a disc.

•

Selecting a camera angle– You can select the

desired camera angle, if a disc contains sequences recorded from different angles.

•

Choices for audio language and sound mode–

You can select the desired audio language and sound mode, if different languages and modes are available on a disc.

•

Parental lock– You can set the control level to

limit playback of discs which may not be suitable for children.

•

Automatic detection of discs– This player auto-

matically detects if a loaded disc is DVD or audio CD.

•

On-screen display– Information about the current

operation can be displayed on a TV screen, allowing you to confirm the currently active functions (such as program playback), on the TV screen using the remote control.

SUPPLIED ACCESSORIES

•

If you need to replace these accessories, please refer to the PART NO. under the illustrations and call 1-800256-2487.

•

Depending on your antenna system, you may need different types of Combiners (Mixer) or Separators (Splitter). Contact your local electronics store for these items.

TV DVD

Remote Control Unit 2 AABatteries

PART NO. (N0290UD)

TD205.QX33 01.3.3 1:39 PM Page 7

Page 8

- 8 - EN

1B17

OPERATING CONTROLS AND FUNCTIONS

- TV/DVD FRONT PANEL - [Fig. 1]

Disc loading tray

2.VIDEO input jack– Connect to the video output

jack of a video camera or VCR.

AUDIO L/R input jacks– Connect to the audio

output jacks of a video camera or VCR.

POWER button–

Press to turn the power on and off.

5.VOLUME K/L buttons– Press to control the vol-

ume level for the DVD and TV.

CHANNEL K/L buttons– Press to select memo-

rized channel.

Remote Sensor Window

8.STOP button– Stops operation of the disc.

REV button– Fast reverses playback to a desired

point.

10.

PLAY button– Starts playback of the disc contents.

11.

FWD button– Fast forwards playback to a desired

point.

12.

PAUSE button– Pauses the current disc operation.

13.

OPEN/CLOSE button– Press to insert discs into

or remove them from the tray.

14.

HEADPHONE jack– To connect headphone (not

supplied) for personal listening.

15.

TV button– Press to do TV operations.

16.

NUMBER button– TV Mode:

Press two digits to directly access the desired channel. Remember to press a "0" before a single digit channel.

+100 button–

Press to select cable channels which are equal or greater than number 100.

DVD Mode:

Press to enter the desired number.

+10 button–

Press to enter the desired numbers which are equal or greater than number 10.

- REMOTE CONTROL - [Fig. 2]

L-AUDIO-RVIDEO

POWER VOLUME CHANNEL STOP PLAY SKIPSKIP PAUSE

HEADPHONE

OPEN/CLOSE

2 4 7 8 18 10 18 12 13 143 5 61

POWER

123

456

789

+10

OPEN/

REV

PLAY

STOP

FWD

ENTER

PAUSE

RETURN

TITLESETUP

MODE

REPEAT

SEARCH MODE

CLEAR

CH.

SKIP

SLEEP +100

VOL.

SELECT

MUTE

SLOW

TV DVD

ANGLE

SUBTITLE

AUDIODISPLAY

17 18

12 19

20 22

23 25

•

To use as TV remote control, press the TV button on the remote control after TV mode is selected. TV operation buttons have been indicated by blue or white.

•

To use as DVD remote control, press the DVD button on the remote control after DVD mode is selected. DVD operation buttons have been indicated by yellow or white.

TD205.QX33 01.3.3 1:39 PM Page 8

Page 9

- 9 - EN

0I04

- REAR VIEW - [Fig. 3]

38 403937

DIGITAL AUDIO OUT

(PCM/BITSTREAM)

COAXIAL

ANT.

AUDIO OUT R L

30.RETURN button– Returns to the previous opera-

tion.

31.

ENTER button– Press to accept a setting.

32.

Arrow buttons– TV Mode:

Press to select a setting mode from the menu on the TV screen. Press to select or adjust from a particular menu.

DVD Mode:

Use when making settings while watching the display on a TV screen.

33.

MENU button– Displays the DVD and TV menus.

34.

SELECT button– Press to change to TV mode,

external input mode or DVD mode.

35.

MUTE button– Press the MUTE button to turn off

the sound portion of the TV program. (Volume level display turns LIGHT RED from LIGHT BLUE.) Press the MUTE button again or press the VOL(ume) K or L button to restore sound.

36.

DVD button– Press to do DVD operations.

37.

Power cord– Connect to a standard AC outlet

(120V/60Hz).

NOTE: Remove the power cord from the hook to

avoid breaking a wire before you connect to a standard AC outlet.

38.

COAXIAL digital audio out jack– Connect to the

digital input of an external amplifier or decoder.

39.

AUDIO L/R output jack– Connect to the analog

audio input of an external amplifier or decoder.

40.

ANT. in jack– Connect to an antenna, cable sys-

tem, or satellite system.

17.

SLEEP button– Press the SLEEP button to dis-

play the sleep timer and start the function. The shut off time can be determined by the number of times you press the button. (0, 10, 20, 30,..90, 0 minutes)

18.

SKIP buttons– Skip chapters or tracks to a

desired point.

19.

MODE button– Activates program playback or

random playback mode.

20.

SETUP button– Press to enter the setup mode or

to change setup items.

21.

TITLE button– Displays the title menu.

22.

CLEAR button– Resets a setting.

23.

DISPLAY button– TV Mode:

Press to display the channel number on the screen. If you press it again, the channel number will disappear.

DVD Mode:

Displays the current status on the TV screen for checking purposes.

24.

SEARCH MODE button– Press to locate a

desired point.

25.

AUDIO button– Press to select a desired audio

language or sound mode.

26.

SUBTITLE button– Press to select a desired sub-

title language.

27.

REPEAT button– Repeats playback of the cur-

rent disc, title, chapter or track.

28.

ANGLE button– Press to change the camera

angle to see the sequence being played back from a different angle.

29.

A-B REPEAT button– Repeats playback of a

selected section.

TD205.QX33 01.3.3 1:39 PM Page 9

Page 10

PREPARATION FOR USE

ANTENNA/CABLE CONNECTIONS

VHF/UHF COMBINED ANTENNA

The VHF/UHF Rod Antenna (not ssupplied) is detachable. Insert the stem of the antenna into the hole on the upper-back portion of the TV/DVD. Connect the VHF/UHF Rod Antenna or VHF/UHF Combination Antenna to the ANT. terminal of the TV/DVD as shown in the diagram below. For the best reception, fully extend the VHF/UHF Rod Antenna and make the necessary adjustments. (Avoid touching the top section when adjusting.)

NOTE:

Before plugging the Rod antenna into antenna terminal, check that the pin is not bent. If it is bent, straighten the pin as illustrated, then plug the pin into antenna terminal.

VHF/UHF SEP ARATE ANTENNAS

In some areas it will be necessary to use an outdoor antenna.

ANT.

Bent pin

Cable Plug

(Needs to be straightened)

(Straight pin)

ANT.

NOTE:

The connection of an indoor antenna may not always give acceptable TV reception.

[Fig. 4]

[Fig. 5]

Rod Antenna (Not supplied)

VHF/UHF Antenna (Not supplied)

VHF/UHF Combiner (Not supplied)

Flat twin-lead cable

UHF Antenna (Not supplied)

VHF Antenna (Not supplied)

- 10 - EN

1B17

TD205.QX33 01.3.3 1:39 PM Page 10

Page 11

- 11 - EN

1B17

CABLE WITH CONVERTER/ DESCRAMBLER BOX OR SATELLITE BOX

If your cable service supplies you with a converter box or if you use a satellite system, you can use the basic connection shown here.

ANT.

OUT

[Fig. 7]

From Cable System or Satellite Dish

75-ohm Coaxial Cable (Not supplied)

Satellite Box or Cable Box (Not supplied)

CABLE WITHOUT CONVERTER/ DESCRAMBLER BOX

Use this connection if your cable system connects directly to your TV/DVD without a converter box.

Note to CATV system installer:

This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building as close to the point of cable entry as practical.

ANT.

[Fig. 6]

From Cable System

75-ohm Coaxial Cable (Not supplied)

TD205.QX33 01.3.3 1:39 PM Page 11

Page 12

- 12 - EN

1B17

INSTALLING THE BATTERIES

1)Open the battery compartment cover by pressing the cover on the remote unit in the direction of the arrow.

2)Insert 2 "AA" penlight batteries into the battery compartment in the direction indicated by the polarity (+/-) markings.

3)Replace the cover.

CONNECTING TO EXTERNAL INPUT JACKS

When you watch a program recorded on an another source (VCR or video camera), use the audio/video input jacks on the front of the TV/DVD.

Connect the audio/video output jacks of another source to the AUDIO L/R and VIDEO jacks of this TV/DVD. Then press the SELECT button until "VIDEO" appears on the screen.

NOTE:

•

When you connect a monaural VCR (another source) to this TV/DVD, connect the Audio output jack of the monaural VCR (another source) to the AUDIO L jack of this TV/DVD. The audio will output in both L and R channel equally.

L-AUDIO-RVIDEO

[Another source]

To the audio output jacks

Audio/Video coaxial cable (not supplied)

etc.

To the video output jack

[Front of the TV/DVD]

[Fig. 8]

TD205.QX33 01.3.3 1:39 PM Page 12

Page 13

- 13 - EN

0I04

CONNECTING TO A STEREO SYSTEM (for DVD)

To Right (red) and Left (white) AUDIO OUT jacks (only DVD AUDIO OUT)

Stereo system

T o ANALOG AUDIO INPUT jacks

AUDIO OUT

DIGITAL AUDIO OUT

(PCM/BITSTREAM)

COAXIAL

NOTES:

•

Be sure to turn off the power to all components in the system before connecting another component.

•

Refer to the Owner's Manuals for your, stereo system and any other components to be connected to the TV/DVD.

CONNECTING TO AN AMPLIFIER EQUIPPED WITH DIGITAL

INPUT JACKS, MD DECK OR DAT DECK (for DVD)

Use an audio coaxial digital cable (commercially available) for the audio connections.

NOTES:

•

The audio source on a disc in a 5.1 channel Dolby Digital surround format cannot be recorded as digital sound by an MD or DAT deck.

•

Be sure to turn off the power to all components in the system before connecting another component.

•

Refer to the Owner's Manuals for the components to be connected to the TV/DVD.

•

Set DOLBY DIGITAL and DTS to OFF for audio output in the setup mode. Playing a TV/DVD using incorrect settings may generate noise distortion, and may also damage the speakers.

•

When DOLBY DIGITAL is set to OFF and VIRTUAL 3D to ON for audio output in the setup mode and you select the audio source in a 5.1 channel Dolby Digital surround format, the audio will be muted.

Amplifier equipped with digital

input jacks, MD deck,

DAT deck, etc.

AUDIO OUT

DIGITAL AUDIO OUT (PCM/BITSTREAM)

COAXIAL

To COAXIAL DIGITAL AUDIO INPUT jack

To DIGITAL AUDIO OUT (PCM/BITSTREAM) COAXIAL jack

(only DVD AUDIO OUT)

[Fig. 9]

[Fig. 10]

TD205.QX33 01.3.3 1:39 PM Page 13

Page 14

- 14 - EN

1B17

CONNECTING TO A DOLBY DIGITALDECODER

OR DTS DECODER (for DVD)

If using this TV/DVD to play back a TV/DVD in a 5.1 channel Dolby Digital surround or DTS surround format, the TV/DVD outputs a Dolby Digital or DTS data stream from its COAXIAL digital audio out jack. By hooking the player up to a Dolby Digital or DTS decoder, you can enjoy a more convincing, realistic ambience with powerful and high-quality surround sound of a professional standard such as can be heard in movie theaters.

Use audio coaxial digital cables (commercially available) for the audio connections.

NOTES:

•

Be sure to turn off the power to all components in the system before connecting another component.

•

Refer to the Owner's Manuals for the components to be connected to the TV/DVD.

•

If connected to a Dolby Digital decoder, set DOLBY DIGITAL to ON for audio output in the setup mode.

•

If connected to a DTS decoder, set DTS to ON for audio output in the setup mode.

•

Unless connected to a Dolby Digital decoder or a DTS decoder, set DOLBY DIGITAL and DTS to OFF for audio output in the setup mode. Playing a TV/DVD using incorrect settings may generate noise distortion, and may also damage the speakers.

•

When DOLBY DIGITAL is set to OFF and VIRTUAL 3D to ON for audio output in the setup mode and you select the audio source in a 5.1 channel Dolby Digital surround format, the audio will be muted.

AUDIO OUT

DIGITAL AUDIO OUT

(PCM/BITSTREAM)

COAXIAL

Front speaker

(left)

Center

speaker

Front speaker

(right)

Surround

speaker

(left)

Surround

speaker

(right)

Subwoofer

To DIGITAL AUDIO OUT (PCM/BITSTREAM) COAXIAL jack

To COAXIAL DIGITAL AUDIO INPUT jack

Dolby Digital

or DTS decoder

“DTS”and “DTS Digital Out”are trademarks of Digital Theater Systems,Inc.

[Fig. 11]

TD205.QX33 01.3.3 1:39 PM Page 14

Page 15

- 15 - EN

1B17

SET UP FOR USE

LANGUAGE SELECTION

If you want to change the language of the on-screen menu, follow the procedure below.

Press the MENU button so that the menu display appears on the TV screen.

Press the Arrow K or L button to point to "LANGUAGE".

Select "ENGLISH", "ESPAÑOL" = Spanish or "FRANÇAIS" = French by using the Arrow B or s button.

Press the MENU button to exit the menu. NOTE: An on-screen display language must be selected each for the TV mode and DVD mode.

PICTURE CHANNEL SET LANGUAGE [ENGLISH] ESPAÑOL FRANÇAIS V-CHIP SET UP CAPTION [OFF]

CHANNEL PRESETTING

To preset a channel or to change a preset channel, follow the procedure below.

Press the MENU button so that the menu display appears on the TV screen.

Press the Arrow K or L button to point to "CHANNEL SET". Then,

press the Arrow B button.

Press the Arrow K or L button to point to "AUTO MEMO". Then,

press the Arrow B button. The tuner scans and memorizes all active channels in your area.

•

The TV distinguishes between standard TV channels and cable channels.

•

When AUTO MEMO action is completed, the lowest memorized channel reappears on the screen.

•

When you press the Arrow K or L button after selecting AUTO MEMO, the tuner will stop at the memorized channels only.

•

The TV may recognize TV channels to be CATV channels by the receiving conditions. In this case, try AUTO MEMO action again in the fine receiving conditions.

[ADD/DELETE FUNCTION]

1)Press the MENU button so that the menu display appears on the TV screen.

2)Press the Arrow K or L button to point to "CHANNEL SET". Then, press the Arrow B button.

3)Press the Arrow K or L button to point to "ADD/DELETE". Then press the Arrow B button.

4)Use the Arrow K or L button to select the channel you wish to put into memory or to erase from memory.

NOTE: The display will return to the screen in about 10 seconds. Perform "ADD/DELETE" function while this display appears on the screen.

•

Press the Arrow B or s button to light up the channel number in LIGHT BLUE if you wish to add the channel into memory.

•

Press the Arrow B or s button to light up the channel number in LIGHT RED if you wish to erase the channel from memory.

5)Press the MENU button to exit the menu.

PICTURE CHANNEL SET LANGUAGE [ENGLISH] ESPAÑOL FRANÇAIS V-CHIP SET UP CAPTION [OFF]

ADD/DELETE AUTO MEMO

PICTURE CHANNEL SET LANGUAGE [ENGLISH] ESPAÑOL FRANÇAIS V-CHIP SET UP CAPTION [OFF]

Getting started

Connect the power cord to a standard AC outlet. NOTE: If some digits appear in the corner of the

screen, press the POWER button without unplugging the power cord.

Press the POWER button to turn on the TV/DVD.

Press the SELECT button on the remote control until channel number or "TV" appears on the screen.

Then press the TV button.

TV SECTION

PICTURE CHANNEL SET LANGUAGE [ENGLISH] ESPAÑOL FRANÇAIS V-CHIP SET UP CAPTION [OFF]

TD205.QX33 01.3.3 1:39 PM Page 15

Page 16

OPERATIONS

- 16 - EN

1B17

WA TCHING ATV PROGRAM

Select the desired channel with the CH(annel) K or L button.

Adjust the volume to the desired listening level using the VOL(ume) K or L button.

Adjust picture controls for a natural looking image. (See "PICTURE ADJUSTMENT".)

Note: Suppose that the TV/DVD is shut off or in any other mode than TV. Press the CHANNEL K or L

button on the TV/DVD, and the TV/DVD will be in the TV mode to watch television.

SELECTING THE SLEEP TIMER

The sleep timer function enables you to shut off the power without pressing the POWER button after a desired time period.

Press the SLEEP button on the remote control.

You may change the sleep time with pressing the SLEEP button on the remote control repeatedly. The timer is set up to 90 minutes, 10 minutes each time the SLEEP button is pushed. (The timer display counts up and sleep timer will be displayed on the screen when you press the SLEEP button on remote control.)

NOTES:

•

When you disconnect the unit from the AC outlet, or if you have a power failure, the sleep time will be lost.

•

When the TV mode is changed to the DVD mode, the sleep time will be lost.

SLEEP 10

To cancel the sleep timer:

Press the SLEEP button repeatedly until "SLEEP 0" is displayed.

CLOSED CAPTION

This TV can receive C1 and C2 of Caption and Text.

CAPTION MODE

1)Characters can be displayed on the TV screen when the received broadcast signal contains the Caption Signals.

2)Paint-on mode: Displays input characters on the screen immediately. Pop-on mode: Once characters are stored in memory, it is displayed all at once. Roll-up mode: Displays the characters continuously by scrolling (max. 4 lines)

NOTE: If the CAPTION C1 or C2 is selected but the caption signal is not included, characters will not be displayed.

TEXT MODE

1)Displays the text on the screen by scrolling (max. 7 lines)

2)If the received broadcast signal does not contain the caption or text signal, no change will occur.

NOTES:

1)When your TV receives a special effects playback signal (i.e., Search, Slow, Still) from a VCR’s video output channel (CH3 or CH4), your TV may not display the correct caption or text.

2)Captions and texts may not match the TV voice exactly.

3)Interference may cause the closed caption system not to function properly.

4)The caption or text characters will not be displayed while the menu display or function’s display is shown.

5)If you see this screen!!

If your TV displays a black box on the screen, this means that your TV is set to TEXT mode. To clear screen, select CAPTION C1, C2 or CAPTION [OFF].

TD205.QX33 01.3.3 1:39 PM Page 16

Page 17

- 17 - EN

1B17

CLOSED CAPTION SELECTION

You may view specially labeled (cc) TV programs, movies, news, prerecorded tapes, etc. with either a dialogue caption or text display added to the program.

Press the MENU button so that the menu display appears on the TV screen.

Press the Arrow K or L button to point to "CAPTION".

Press the Arrow B or s button to select the mode you wish.

When done, press the MENU button to exit the menu.

: Press the Arrow

B or s

button.

PICTURE CHANNEL SET LANGUAGE [ENGLISH] ESPAÑOL FRANÇAIS V-CHIP SET UP CAPTION [OFF]

PICTURE CHANNEL SET LANGUAGE [ENGLISH] ESPAÑOL FRANÇAIS V-CHIP SET UP CAPTION [ C1]

PICTURE CHANNEL SET LANGUAGE [ENGLISH] ESPAÑOL FRANÇAIS V-CHIP SET UP CAPTION [ C2]

PICTURE CHANNEL SET LANGUAGE [ENGLISH] ESPAÑOL FRANÇAIS V-CHIP SET UP CAPTION [ T1]

PICTURE CHANNEL SET LANGUAGE [ENGLISH] ESPAÑOL FRANÇAIS V-CHIP SET UP CAPTION [ T2]

PICTURE ADJUSTMENT

GAME MODE

Set to the most suitable position for TV GAME.

[B] : ON [s] : OFF

BRIGHT

Adjust until the whitest parts of the picture are as bright as you prefer.

[B] : increase brightness [s] : decrease brightness

CONTRAST

Adjust to increase or decrease contrast.

[B] : increase contrast [s] : decrease contrast

COLOR

Adjust to be brilliant or pale color.

[B] : be brilliant color [s] : be pale color

TINT

Adjust to obtain natural skin tones.

[B] : greenish tone [s] : reddish tone

NOTES:

•

In the above steps, the picture adjustment display will disappear from the TV screen after about 10 seconds unless you press any buttons, even though you may not be finished. Press the MENU and Arrow B button so that "PICTURE" mode is selected. Then, press the Arrow K or L button repeatedly until the display returns to the screen.

•

If you adjust the other Picture control after you set the Game mode to [ON], the Game mode is set to [OFF] automatically. If you want to set the Game mode, reset it to [ON].

[ ]

GAME MODE

[ ]

OFF ON

[ ]

BRIGHT

[ ]

CONTRAST

[ ]

COLOR

[ ]

TINT

[ ]

: Press the Arrow ▲ or ▼ button.

Press the MENU button so that the menu display appears on the TV screen.

Press the Arrow B button so that "PICTURE" mode is selected.

Select the feature you wish to adjust with the Arrow K or L button and adjust it with the Arrow B or s

button.

TD205.QX33 01.3.3 1:39 PM Page 17

Page 18

- 18 - EN

1B17

V-CHIP SET UP

V-CHIP enables parents to prevent their children from watching inappropriate material on TV. V-CHIP reads the ratings for programming (except for news and sports programs, unedited movies on premium cable channels, and Emergency Broadcast System signals), then denies access to programming if the program's rating meets the limitations you select. In this case, "PROTECTED PROGRAM by ..." message appears on the TV screen. To block ratings, follow the steps below.

•

Programming may be rated by the Motion Picture Association of America (MPAA) or according to the Television Parental Guidelines. In order to block any inappropriate programming, set your limits in both places (MPAA RATING and TV RATING).

•

You cannot access the menu when the "PROTECTED PROGRAM by ..." message appears. In this case, change to the unblocked channel, then press the MENU button.

[MPAA RATING SET UP]

Press the MENU button so that the menu display appears on the TV screen.

Press the Arrow K or L button to point to "V-CHIP SET UP". Then, press the Arrow B button.

Press the Arrow K or L button to point to "MPAA RATING". Then, press the Arrow B button.

Press the Arrow K or L button to point to your desired item. Then, press the Arrow B button to select [BLOCK] or [VIEW].

PICTURE CHANNEL SET LANGUAGE [ENGLISH] ESPAÑOL FRANÇAIS V-CHIP SET UP CAPTION [OFF]

G [VIEW] PG

[VIEW]

PG-13

[VIEW]

[BLOCK]

NC-17

[BLOCK]

TV RATING MPAA RATING

•

When you select the rating category and turn it [BLOCK], the higher rating will turn [BLOCK] automatically. Also, the lower rating will turn [VIEW] automatically.

•

When you turn "G" to [BLOCK] or [VIEW], the all ratings will turn to [BLOCK] or [VIEW] automatically.

•

When you turn "X" to [VIEW], the all ratings will turn to [VIEW] automatically.

Press the MENU button to exit the menu.

[TV RATING SET UP]

Press the MENU button so that the menu display appears on the TV screen.

Press the Arrow K or L button to point to "V-CHIP SET UP". Then, press the Arrow B button.

Press the Arrow K or L button to point to "TV RATING". Then, press the Arrow B button.

Press the Arrow K or L button to point to your desired item. Then, press the Arrow B button to select [BLOCK] or [VIEW].

• G: General Audience

• PG: Parental Guidance suggested.

• PG-13: Unsuitable for children under 13

• R: Restricted; under 17 requires accompanying parent or adult guardian

• NC-17: No one under 17 admitted

• X: Mature audience only

PICTURE CHANNEL SET LANGUAGE [ENGLISH] ESPAÑOL FRANÇAIS V-CHIP SET UP CAPTION [OFF]

TV RATING MPAA RATING

TV-Y

[VIEW]

TV-Y7 ( )

[VIEW]

TV-G

[VIEW]

TV-PG

( ) [VIEW]

TV-14

( ) [VIEW]

TV-MA ( )

[VIEW]

TD205.QX33 01.3.3 1:39 PM Page 18

Page 19

- 19 - EN

1B17

•

When you select the rating category and turn it [BLOCK], the higher rating will turn [BLOCK] automatically. Also, the lower rating will turn [VIEW] automatically.

•

When you turn "TV-Y" to [BLOCK] or [VIEW], the all ratings will turn to [BLOCK] or [VIEW] automatically.

•

When you turn "TV-MA" to [VIEW], the all ratings will turn to [VIEW] automatically.

When you select TV-Y7, TV-PG, TV-14, or TV-MA and you press the Arrow B button, the sub-ratings will appear on the TV screen. If you select the rating category (example: TV-PG) and turn it [BLOCK] or [VIEW], the sub-ratings (example: V for Violence) will turn [BLOCK] or [VIEW] automatically.

You can set the sub-ratings to [BLOCK] or [VIEW] individually when the rating category is set to [BLOCK]. To set the sub-ratings individually, follow the steps below.

•

When you select [TV-Y7]:

Press the Arrow K or L button to select "FV" (Fantasy Violence). Then, press the Arrow B button to select [BLOCK] or [VIEW].

•

When you select [TV-PG], [TV-14] or [TV-MA]:

Press the Arrow K or L button to select "D"(Suggestive Dialog), "L"(Coarse Language), "S"(Sexual Situation), or "V"(Violence). Then, press the Arrow B button to select [BLOCK] or [VIEW]. NOTE: When you select [TV-MA], "D" does not appear on the TV screen.

•

The sub-ratings which set to [BLOCK] appears next to the rating category in the TV RATING menu.

Press the MENU button to exit the menu.

• TV-Y: Appropriate for all children

• TV-Y7: Appropriate for children seven and older

• TV-G: General Audience

• TV-PG: Parental Guidance suggested.

• TV-14: Unsuitable for children under 14

• TV-MA: Mature audience only

TV-Y7

[BLOCK]

TV-PG

[BLOCK]

TV-Y

[VIEW]

TV-Y7 (

) [VIEW]

TV-G

[BLOCK]

TV-PG

(DLSV) [BLOCK]

TV-14

(DLSV) [BLOCK]

TV-MA (

LSV) [BLOCK]

TD205.QX33 01.3.3 1:39 PM Page 19

Page 20

ABOUT THE DISCS

- 20 - EN

0I04

PLAYABLE DISCS

The following discs can be played back on this TV/DVD.

This player conforms to the NTSC color system. You cannot play discs recorded in other color systems such as PAL or SECAM.

•

Some discs include region codes as shown below.

•

The number inside the symbol refers to a region of the world, and a disc encoded in a specific region format can only be played back on TV/DVD with the same region code.

The following discs cannot be played back on this TV/DVD.

•

DVD with region codes other than 1 or ALL.

•

DVD-ROM

•

DVD-R/DVD-RAM (Never play back, otherwise malfunction may result.)

•

CD-ROM

•

VSD

•

CDV (Only plays back the audio part.)

•

CD-G (Only plays back the sound.)

•

CD-R (Never play back, otherwise malfunction may result.)

•

CD-I (Never play back, otherwise malfunction may result.)

•

Photo CD (Never play back, otherwise malfunction may result.)

•

Video CD (Never play back, otherwise malfunction may result.)

Any other discs without compatibility indications

DVD Video

12 cm

Approx. 4 h

(single-sided)

Approx. 8 h

(double-sided)

Approx. 80 min

(single-sided)

Approx. 160 min

(double-sided)

20 min

8 cm

(singles)

Logo

Maximum

Playback Time

ContentsDisc Type

Sound

and

Pictures

Audio

Disc Size

Sound

74 min

DISC TYPES

[DVD]

Data on a DVD is divided into sections called "titles", and then into subsections called "chapters", each of which is given a title or chapter number. Playback conditions are preset on some DVD video discs, and these playback conditions take priority over user operations on this player. If a function you selected does not run as desired, refer to the manual accompanying the disc.

[AUDIO CD]

Data on an audio CD is divided into sections called "tracks", each of which is given a track number.

Example

Title 1 Title 2

Chapter 1 Chapter 2 Chapter 1 Chapter 2Chapter 3 Chapter 4

Example

Track 1 Track 2 Track 3 Track 4 Track 5 Track 6

SYMBOLS USED IN THIS MANUAL

The following symbols appear below some headings and in some notes in this manual, with the following meanings.

Description refers to playback of DVD video discs.

Description refers to playback of audio CDs.

DVD

DVD SECTION

TD205.QX33 01.3.3 1:39 PM Page 20

Page 21

- 21 - EN

0I04

PLAYING A DISC

PLAYING A DVD VIDEO

OR AN AUDIO CD

1 Press the OPEN/CLOSE button.

•

The disc loading tray will open.

2 Place a disc into the tray.

•

Make sure the disc is sitting properly in the correct recess, with the label side up.

3 Press the PLAY button.

•

The tray will close automatically, and playback will then start from the first chapter or track of the disc. You need to press the PLAY button only when the tray has been closed by pressing the OPEN/CLOSE button.

•

When you play back the DVD which a title menu is recorded, the menu may appear on the screen. In this case, refer to "USING THE TITLE MENU".

4 Press the STOP button to stop play.

NOTES:

•

A "prohibited icon" may appear at the bottom right on the TV screen during operation, warning that a prohibited operation has been encountered by the TV/DVD or the disc.

•

If a disc is dirty or has scratches, the pictures may appear distorted and the playback operation may stop. In such cases, clean the disc and unplug the power cord and then plug it again before resuming playback.

•

With DVDs that use some titles for playback program signals, playback may start from the second title, or it may skip these titles.

•

Suppose that the TV/DVD is shut off or in any other mode than DVD. Press the PLAY or OPEN/CLOSE button on the TV/DVD, and the TV/DVD will be in the DVD mode to play DVD’s.

•

To run the DVD player, press the PLAY or OPEN/CLOSE button.

DVD

USING THE DVD MENUS

DVD

Some DVDs contain their own menus, such as a guidance menu which describes the contents of the disc or a selection menu for sound, language and other customized settings.

1 Press the MENU button.

•

The DVD menu will appear.

2 Select the desired title.

•

Press the Arrow buttons (L/K/B/s) to change the setting, and then press the ENTER button.

3 Playback will start from the selected title.

Getting started

Turn on the power of the amplifier and any other components which are connected to the TV/DVD. (Change the input system to suit the TV/DVD, and check that the sound volume is correct.)

2 Press the POWER button.

•

The power will turn on.

3 Press the SELECT button on the remote con-

trol until "DVD" appears on the screen. Then press the DVD button.

TD205.QX33 01.3.3 1:39 PM Page 21

Page 22

- 22 - EN

1B17

USING THE TITLE MENU

With a DVD containing a title menu, you can select desired titles from the menu.

1 Press the TITLE button.

•

The title menu will appear.

2 Select the desired title.

•

Press the Arrow buttons (L/K/B/s) to change the setting, and then press the ENTER button.

CALLING UP A MENU SCREEN DURING PLAYBACK

For DVDs

•

Press the MENU button to call up the DVD menu.

•

Press the TITLE button to call up the title menu.

NOTE:

•

Contents of menus and corresponding menu operations may vary between discs. Refer to the manual accompanying the disc for details.

DVD

PAUSING PLAYBACK OR

DISPLAYING A STILL PICTURE

DVD CD

1 Press the PAUSE button during playback.

•

Playback will pause, with sound muted.

2 Press the PLAY button to resume playback.

PAUSE

PLAY

RESUMING PLAYBACK FROM

THE POINT WHERE

PLAYBACK STOPPED

DVD

1 Press the STOP button during playback.

•

Playback will stop, and "STOP" will appear at the top-right of the screen and then "MEMO ON" at the top-left.

2 Press the PLAY button. Playback will start

from the point where the previous playback session was stopped.

NOTES:

•

The resume function can be reset by pressing the STOP button twice or by opening the disc loading tray.

•

The resume function is not available with audio CDs.

MEMO ON

PLAY

STEPPING THROUGH FRAMES

DVD

1 Press the PAUSE button while playback is

paused.

•

The next picture frame is displayed with sound muted each time the button is pressed.

2 Press the PLAY button to resume playback.

PAUSE

PLAY

TD205.QX33 01.3.3 1:39 PM Page 22

Page 23

- 23 - EN

1B17

1 Press the FWD

or REV hhbutton during

playback. (The sound for DVD is muted.)

•

For DVDs, pressing the FWD g or REV h button cycles the playback speed in three steps.

•

For audio CDs, the playback speed is fixed.

2 Press the PLAY button to return to normal

playback speed.

FAST FORWARD/REVERSE

DVD CD

Ex2

Ex8

Ex32

Dx8

Dx32

Dx2

REV Button Button

FWD

1 Press the FWD

button while playback is

paused. (Sound remains muted.)

•

Slow motion mode will be activated.

•

Pressing the FWD g button cycles the playback speed in three steps. Select an appropriate speed while referring to the speed indication on the screen.

2 Press the PLAY button to return to normal

playback speed.

NOTES:

•

Slow playback is not available with audio CDs.

•

The reverse of slow playback is not available.

SLOW MOTION

DVD

1/16

1/8

1/2

Button

FWD

1 Press the number buttons to enter the desired

track number.

•

The selected track will be located, and playback will start.

You can also press the SEARCH MODE button, use the number or K/L buttons to enter the track number, and then press the PLAY button.

Pressing the SEARCH MODE button during playback causes the current track number to be displayed in square brackets.

SEARCH/TRACK

TOTAL TRACKS: 07

TRACK [ 6 ]

Start Exit

TRICKS WITH THE SKIP BUTTONS

(H, G)

If the SKIP button G is pressed during playback or while playback is paused, the current track is skipped and the next track is played. When the SKIP button H is pressed once, the top of the current track is located for replaying. When the SKIP button H is pressed again while playback is paused, the previous track is located. Each time the SKIP button H is pressed while playback is paused, the disc is searched backward track by track. Once playback has started, pressing the SKIP button H locates the top of the current track.

STARTING FROM A DESIRED

TIME COUNT

DVD CD

1 Press the SEARCH MODE

button.

•

Press the button three times for DVDs or two times for audio CDs.

2 Press the number buttons to set the desired

time count.

•

Example: 1 hour, 23 minutes and 30 seconds

1→+10→+10→3→

+10→+10→+10→0

•

To enter 0 (zero), press the number 0 (zero) button or press the B button.

3 Press the PLAY button. Playback will then

start from the set time count.

NOTES:

•

Playback from a desired time count is not available with some discs.

•

Specific time playback is not available with some discs or if the unit is in stop mode.

STARTING FROM A DESIRED

TRACK

SEARCH/TIME

TOTAL TIME 1h23m45s

TIME [ _h__m__s ]

Start Exit

SEARCH/TIME

TOTAL TIME: 1h23m45s

TIME [1h23m30s]

Start Exit

TD205.QX33 01.3.3 1:39 PM Page 23

Page 24

- 24 - EN

1B17

PLAYING FROM A DESIRED

TITLE OR CHAPTER

•

Press the number buttons to enter the desired chapter number during playback. The selected chapter will be located within the current title and then played back.

•

Title search starts when any number button is pressed during stop mode.

You can also press the SEARCH MODE button, use the number or K/L buttons to enter the chapter number, and then press the PLAY button.

•

For title search, call up the chapter search screen, press the SEARCH MODE button, and then operate in the same manner as above.

Pressing the SEARCH MODE button during playback causes the current chapter or title number to be displayed in square brackets.

NOTE:

Playback from a desired title or chapter is not available with some DVDs.

DVD

SEARCH/CHAPTER

TOTAL CHAPTERS: 027

CHAPTER [ 15 ]

Start Exit

SEARCH/TITLE

TOTAL TITLES: 07

TITLE [ 5 ]

Start Exit

RANDOM (Audio CD)

1 Press the MODE button in stop mode.

•

The program setting menu screen will appear.

2 Press the MODE button again.

3 Press the PLAY button. Random playback will

then start.

NOTE:

•

Program playback is not available during random playback.

RANDOM

Start Exit

1 Press the REPEAT button.

For DVDs

•

A single title or chapter is played back repeatedly.

•

Pressing the REPEAT button cycles the display on the screen as follows.

•

If normal playback is performed after REPEAT CHAPTER has been selected without any chapter

number entered, the first chapter is played back repeatedly. If the chapter number is changed using the number buttons or the SKIP buttons (HG) during playback, the newly selected chapter is played back repeatedly.

For audio CDs

•

The whole disc or a single track is played back repeatedly.

•

Pressing the REPEAT button cycles the display on the screen through REPEAT TRACK, REPEAT ALL and REPEAT OFF.

•

If normal playback is performed after REPEAT TRACK has been selected without any track num-

ber entered, the first track will be played back repeatedly. If the track number is changed using the number buttons or the SKIP buttons (HG) during playback, the newly selected track is played back repeatedly.

NOTE:

•

Repeat playback is not available with some discs

REPEAT

DVD CD

REPEAT

[CHAPTER]

REPEAT

[TITLE]

REPEAT

[OFF]

The current chapter is played back repeatedly.

The current title is played back repeatedly.

No repeat playback.

REPEAT

[TRACK]

REPEAT

[OFF]

REPEAT

[ALL]

The whole disc is played back repeatedly.

The current track is played back repeatedly.

No repeat playback.

If the REPEAT button is pressed during program playback, that program is played back repeatedly.

TD205.QX33 01.3.3 1:39 PM Page 24

Page 25

- 25 - EN

1B17

You can define a section to be played back repeatedly.

1 Press the A-B REPEAT button during play-

back.

•

The starting point (A) will then be selected.

2 Press the A-B REPEAT button again at the

end point (B) of the desired section.

•

The selected section will be played back repeatedly.

3 To exit A-B repeat playback, press the A-B

REPEAT button and set it to OFF.

NOTES:

•

If B is selected at a point which is earlier than point A, the previous setting of A is canceled and the point selected as B will become the setting for A.

•

With DVDs, the A-B repeat section can be set only within the current title.

•

With audio CDs, the A-B repeat section can be set across different tracks.

•

A-B repeat is not available with some scenes in DVD.

A-B REPEAT

DVD CD

REPEAT [ A - ]

REPEAT [ A - B ]

REPEAT [ OFF ]

1 Press the MODE button in stop mode.

•

The program screen will appear.

2 Press the number or

KK/LL

buttons to enter the desired track numbers, and then press the ENTER button to select the settings.

•

The total playback time for the selected tracks will appear on the TOTAL line.

3 Press the PLAY button.

•

Playback will start in the programmed order.

•

The contents of the program are retained after the program playback ends.

NOTES:

•

Addition or confirmation of programs is not possible during program playback. You must stop the current playback before such operations can be carried out.

•

Press the CLEAR button to cancel a program. The most recently entered program will then be deleted.

•

Up to 20 programs can be stored at any time.

•

Numbers which exceed the number of tracks on the disc in the tray are not accepted.

•

Playback from a desired track and random playback are not available during program playback.

•

Program settings are cleared when the power is turned off or the disc loading tray is opened.

PROGRAM (Audio CD)

PROGRAM T [ ] / 18 TOTAL 0h 00m 00s

Start, Delete Exit

PROGRAM T [12 ] / 14 TOTAL 0h 27m 46s

01: 02 02: 04 03: 06 04: 09 05: 01 06: 03 07: 05 08: 07 09: 13 10: 08

11: 12 12: 14 13: 10 14: 11

Start, Delete Exit

PROGRAM T [ ] / 14 TOTAL 0h 27m 46s

01: 09 02: 03 03: 04 04: 07 05: 01 06: 02 07: 12 08: 10 09: 13 10: 08

11: 01 12: 14 13: 10 14: 11

Start, Delete Exit

TD205.QX33 01.3.3 1:39 PM Page 25

Page 26

SETTINGS

- 26 - EN

1B17

The TV/DVD has a function which allows you to select the desired audio language and sound mode.

For DVDs

Press the AUDIO button during playback, and then press the KK/LLbuttons to select the desired audio language.

•

The audio language can be changed if multiple languages are recorded on the DVD being played.

For audio CDs

Press the AUDIO button during playback.

•

Pressing the K/L buttons cycles the sound mode through STEREO, L-CH and R-CH.

CHANGING THE AUDIO

LANGUAGE OR SOUND MODE

DVD CD

NOTES:

•

Pressing the K/L buttons may not work on some DVDs with multiple audio languages (e.g. DVDs which allow audio language setting on the disc menu). Operation varies between discs, so refer to the manual accompanying the disc.

•

If a desired language is not shown after pressing the K/L buttons several times, the disc does not have an audio source in that language.

•

The audio language resets to the one which has been selected in the setup mode, every time the power is turned on or discs are replaced. If that language is not available on a disc, a language defined by the disc is selected.

•

The screen display will disappear after about 15 seconds.

•

If you use DIGITAL AUDIO OUT jack, the sound mode of audio CDs can not be changed.

AUDIO 1 :

E N G / 8

AUDIO 2 :

F R E /

AUDIO 8 :

J P N /

HELLO

Bon jour

Only the right channel is active.

AUDIO R -

C H

Both right and left channels are active (stereo).

AUDIO S T

E R E O

Only the left channel is active.

AUDIO L - C H

TD205.QX33 01.3.3 1:39 PM Page 26

Page 27

- 27 - EN

1B17

The TV/DVD has a function which allows you to select the desired language for subtitles.

Press the SUBTITLE button during playback, and then press the KK/LLbuttons to select the desired subtitle language.

•

The subtitle language can be changed if the subtitles are recorded in multiple languages on the DVD being played.

•

The subtitle language cannot be changed if the subtitles are recorded in a single language on the DVD being played.

•

Pressing the K/L buttons cycles the subtitle language from SUBTITLE 1, SUBTITLE 2 and all the languages recorded through to OFF.

NOTES:

•

Some discs allow subtitle language setting on the disc menu. (Operation varies between discs, so refer to the manual accompanying the disc.)

•

If the desired language is not shown after pressing the K/L buttons several times, the disc does not have subtitles in that language.

•

The subtitle language resets to the one which has been selected in the setup mode, every time the power is turned on or discs are replaced. If that language is not available on a disc, a language defined by the disc is selected.

•

It may take time to display the subtitles in the selected language.

•

The screen display will disappear after about 15 seconds.

CHANGING THE SUBTITLE

LANGUAGE

DVD

Subtitle 1

No subtitles

Subtitle 2

SUBTITLE 1 :

E N G / 8

SUBTITLE 2 :

F R E / 8

SUBTITLE 0 :

O F F / 8

HELLO

Bon jour

The TV/DVD has a function which allows you to select the desired camera angle.

1 Press the ANGLE button during playback.

•

If the disc contains sequences recorded from different camera angles, the angle icon ( ) will appear at the bottom-right of the screen. You can change the camera angle when the icon appears on the screen.

•

The camera angle cannot be changed if the disc does not contain sequences recorded from different camera angles.

2 Press the

KK/LL

buttons while the angle num-

ber is shown on the screen.

NOTE:

•

The screen display will disappear after about 15 seconds.

CHANGING THE CAMERA

ANGLE (Multi-Angle Pictures)

DVD

ANGLE [ 1 ] / 8

Angle 1 (default)

Angle 2

Angle 8

ANGLE [ 2 ] / 8

ANGLE [ 8 ] / 8

TD205.QX33 01.3.3 1:39 PM Page 27

Page 28

- 28 - EN

1B17

You can check the information about the disc by pressing the DISPLAY button on the remote control.

For DVDs

Press the DISPLAY button.

•

Pressing the DISPLAY button cycles the display on the screen.

NOTE:

•

DOLBY DIGITAL 5.1 Channel is displayed as "DOLBY DIGITAL 6CH".

For audio CDs

Press the DISPLAY button.

•

Pressing the DISPLAY button toggles the display on the screen.

CHANGING THE ON-SCREEN

DISPLAY

TITLE : 01/04

TIME 0h10m25s REMAIN 0h05m25s

CHAPTER : 001/010

TIME 0h02m25s REMAIN 0h01m31s

AUDIO : 1.ENGLISH

DOLBY DIGITAL

6CH SUBTITLE : 2.FRENCH ANGLE : 8/8 VIRTUAL 3D

• Current title number / total number of titles.

• Elapsed time of the current title.

• Remaining time of the current title.

• Current chapter number / total number of chapters

in the current title.

• Elapsed time of the current chapter.

• Remaining time of the current chapter.

• Current language for the sound.

• Current audio format.

• Current language for the subtitles.

• Selected angle / total number of angles.

• VIRTUAL 3D setting(ON/OFF).

No display

DVD CD

TRACK : 01/04

TIME 0h05m25s REMAIN 0h01m31s

PROGRAM

• Current track number / total track number.

• Elapsed time of the current track.

• Remaining time of the current track.

• Current play mode.

No display

TD205.QX33 01.3.3 1:39 PM Page 28

Page 29

- 29 - EN

0I04

CHANGING THE SETUP ITEMS

1 Press the SETUP button.

•

The setup screen appears.

2 Press the

KK/LL

or number buttons to select LANGUAGE, and then press the ENTER button.

3 Press the

KK/LL

or number buttons to select an item, and then press the ENTER button.

4 Press the

KK/LL

or number buttons to select a desired item, and then press the ENTER button.

•

If OTHER is selected on the AUDIO, SUBTITLE or DISC MENU setting screen, the COUNTRY CODE setting screen will appear. Press the number buttons to enter the desired language (country) code while referring to the list on page 33, and then press the ENTER button.

5 Press the SETUP button.

•

The setup mode will be canceled and the ordinary screen will appear.

NOTES:

•

If the automatically selected language in "AUTO" for subtitle is same as the selected language for "AUDIO", the subtitle will not be shown.

•

If the number buttons are used in steps 2 to 4, the settings are immediately selected. (You do not need to press the ENTER button.)

•

Language Setting for AUDIO and SUBTITLE is not available with some discs. Then use the AUDIO and SUBTITLE button. Details are on pages 26 and 27.

•

An on-screen display language must be selected both for TV mode and for DVD mode.

LANGUAGE SETTINGS

SETUP

1. LANGUAGE

2. VIDEO

3. AUDIO

4. LOCK

5. OTHERS

Enter / Exit

SETUP/LANGUAGE

1. AUDIO [ENG]

2. SUBTITLE [AUTO]

3. DISC MENU [ENG]

4. PLAYER MENU [ENG]

Enter, Back Exit

SETUP/LANGUAGE AUDIO

1. ORIGINAL

2. ENGLISH

3. SPANISH

4. FRENCH

5. OTHER

• The original language of each disc will be selected.

• Voice is played back in English.

• Voice is played back in Spanish.

• Voice is played back in French.

• You can select other languages for audio playback.

Enter, Back Exit

•

Subtitles are shown in the automatically selected

language

• Subtitles are shown in English.

• Subtitles are shown in Spanish.

• Subtitles are shown in French.

• You can select other languages for subtitles.

SETUP/LANGUAGE SUBTITLE

1. AUTO

2. ENGLISH

3. SPANISH

4. FRENCH

5. OTHER

Enter, Back Exit

SETUP/LANGUAGE DISC MENU

1. AUTO

2. ENGLISH

3. SPANISH

4. FRENCH

5. OTHER

• The disc menu is shown in the automatically

selected language.

• The disc menu appears in English.

• The disc menu appears in Spanish.

• The disc menu appears in French.

•

You can select other languages for the disc menu

Enter, Back Exit

SETUP/LANGUAGE PLAYER MENU

1. ENGLISH

2. SPANISH

3. FRENCH

• The on-screen display appears in English.

• The on-screen display appears in Spanish.

• The on-screen display appears in French.

Enter, Back Exit

SETUP/LANGUAGE COUNTRY CODE

[ _ _ _ _ ]

Enter, Back Exit

DVD

TD205.QX33 01.3.3 1:39 PM Page 29

Page 30

- 30 - EN

0I04

1 Press the SETUP button.

•

The setup screen will appear.

2 Press the

KK/LL

or number buttons to select

VIDEO, and then press the ENTER button.

3 Press the

KK/LL

or number buttons to select an

item, and then press the ENTER button.

4 Press the

KK/LL

or number buttons to select the desired item, and then press the ENTER button.

5 Press the SETUP button.

•

The setup mode will be canceled and the ordinary screen will appear.

NOTE:

•

If the number buttons are used in steps 2 to 4, the settings are immediately selected. (You do not need to press the ENTER button.)

VIDEO SETTINGS

SETUP

1. LANGUAGE

2. VIDEO

3. AUDIO

4. LOCK

5. OTHERS

Enter / Exit

SETUP/VIDEO

1. TV MODE [4:3LB]

2. STILL MODE [AUTO]

Enter, Back Exit

SETUP/VIDEO TV MODE

1. 4:3 PAN&SCAN

2. 4:3 LETTER BOX

3. 16:9 WIDE

• Full-height pictures are shown with one or both

sides trimmed.

• Wide screen (full-width) pictures are shown

with black bars at top and bottom.

• This is not available for TV/DVD.

Enter, Back Exit

SETUP/VIDEO STILL MODE

1. AUTO

2. FIELD

3. FRAME

• AUTO is normally selected.

• If pictures are blurred in auto mode.

• For showing motionless pictures at high

resolution in still mode.

Enter, Back Exit

1 Press the SETUP button.

•

The setup screen will appear.

2 Press the

KK/LL

or number buttons to select AUDIO, and then press the ENTER button.

3 Press the

KK/LL

or number buttons to select an item, and then press the ENTER button.

4 Press the

KK/LL

or number buttons to select the desired item, and then press the ENTER button.

•

If PCM, DOLBY DIGITAL or DTS is selected on the DIGITAL OUT setting screen, press the K/L or number buttons again to select a further item, and then press the ENTER button.

AUDIO SETTINGS

SETUP

1. LANGUAGE

2. VIDEO

3. AUDIO

4. LOCK

5. OTHERS

Enter / Exit

SETUP/AUDIO

1. DIGITAL OUT

2. VIRTUAL 3D [OFF]

Enter, Back Exit

SETUP/AUDIO DIGITAL OUT

1. PCM [48kHz]

2. DOLBY DIGITAL [OFF]

3. DTS [OFF]

• Sets the sample rate for playing a disc recorded

with high sound quality.

• When a Dolby Digital decoder is connected.

• When a DTS decoder is connected.

Enter, Back Exit

SETUP/AUDIO VIRTUAL 3D

1. OFF

2. ON

• To activate the 3D effect.

Enter, Back Exit

SETUP/AUDIO PCM

1. 48kHz

2. 96kHz

• Audio signals are converted to 48 kHz/16 bit

signals for digital output when playing a DVD recorded with high sound quality (48 kHz/ 20 bit/24 bit, 96 kHz).

• Sound is reproduced at the high quality of

96 kHz when playing a DVD recorded with high

sound quality (48 kHz/20 bit/24 bit, 96 kHz).

For 48 kHz discs or when 4:3 LETTER BOX is selected in TV MODE, sound is reproduced at 48 kHz

Enter, Back Exit

SETUP/AUDIO DOLBY DIGITAL

1. OFF

2. ON

•

When a Dolby Digital decoder built-in amplifier

is used.

Enter, Back Exit

SETUP/AUDIO DTS

1. OFF

2. ON

• When a DTS decoder built-in amplifier is used.

Enter, Back Exit

TD205.QX33 01.3.3 1:39 PM Page 30

Page 31

- 31 - EN

1B17

5 Press the SETUP button.

•

The setup mode will be canceled and the ordinary screen will appear.

NOTE:

•

If the number buttons are used in steps 2 to 4, the settings are immediately selected. (You do not need to press the ENTER button.)

This unit employs TruSurround system of SRS Labs, Inc. as virtual technology.

TruSurround and the symbol are trademarks of SRS Labs, Inc. TruSurround technology is incorporated under license from SRS Labs, Inc.

1 Press the SETUP button.

•

The setup screen will appear.

2 Press the

KK/LL

or number buttons to select

LOCK, and then press the ENTER button.

3 Press the number buttons to enter the 4-digit

password, and then press the ENTER button.

•

When doing this for the first time, enter any 4 digits. That number will be used as the password from the second time onward.

•

By entering the password, you can then change the control level and password settings.

4 Press the

KK/LL

or number buttons to select an

item, and then press the ENTER button.

When LEVEL is selected

•

Press the K/L buttons to select an item from LEVEL 1 to LEVEL 8 or NONE, and then press the ENTER button.

When CHANGE PASSWORD is selected

•

The password entry screen will be displayed and the password which has already been set will be cleared. The four digits entered in step 3 will then be set as the new password.

•

The setup screen will appear.

PARENTAL LOCK

SETUP

1. LANGUAGE

2. VIDEO

3. AUDIO

4. LOCK

5. OTHERS

Enter / Exit

• To set the control level to 1 to 8 or none.

• To cancel the current password and set a

new one on the same screen.

SETUP/LOCK PASSWORD [ _ _ _ _ ]

1. LEVEL [LEVEL8]

2. CHANGE PASSWORD

Enter, Back

SETUP/LOCK PASSWORD [ ]

1. LEVEL [LEVEL8]

2. CHANGE PASSWORD

Enter, Back

____

SETUP/LOCK PARENTAL LOCK

NONE LEVEL 8 [PLAY ALL] LEVEL 7 [NC-17] LEVEL 6 [R] LEVEL 5 LEVEL 4 [PG-13] LEVEL 3 [PG] LEVEL 2 LEVEL 1 [G]

Enter

TD205.QX33 01.3.3 1:39 PM Page 31

Page 32

- 32 - EN

1B17

CONTROL LEVELS

•

Level 8

DVD software of any grade (adult/general/children) can be played back.

•

Level 7 to 2

Only DVD software intended for general use and children can be played back.

•

Level 1

Only DVD software intended for children can be played back, with those intended for adult and general use prohibited.

•

None

Parental lock is canceled.

NOTES:

•

With some DVDs, it may be difficult to find if they are compatible with parental lock. Be sure to check if the parental lock function operates in the way that you have set.

•

If the number buttons are used in steps 2 to 4, the settings are immediately selected. (You do not need to press the ENTER button.)

•

Record the password in case you forget it.

1 Press the SETUP button.

•

The setup screen will appear.

2 Press the

KK/LL

or number buttons to select OTHERS, and then press the ENTER button.

3 Press the

KK/LL

or number buttons to select an item, and then press the ENTER button.

4 Press the

KK/LL

or number buttons to select a desired item, and then press the ENTER button.

5 Press the SETUP button.

•

The setup mode will be canceled and the ordinary screen will appear.

NOTE:

•

If the number buttons are used in steps 2 to 4, the settings are immediately selected. (You do not need to press the ENTER button.)

OTHER SETTINGS

SETUP

1. LANGUAGE

2. VIDEO

3. AUDIO

4. LOCK

5. OTHERS

Enter / Exit

SETUP/OTHERS

1. OSD MESSAGE [ON]

2. ANGLE ICON [ON]

3. BACKGROUND [BLUE]

Enter, Back Exit

SETUP/OTHERS OSD MESSAGE

1. ON

2. OFF

• Selects whether to display messages on the

screen.

Enter, Back Exit

SETUP/OTHERS ANGLE ICON

1. ON

2. OFF

• Selects whether to display the angle icon.

Enter, Back Exit

SETUP/OTHERS BACKGROUND

1. BLUE

2. GRAY

• Turns the background to blue.

• Turns the background to gray.

Enter, Back Exit

[Cannot remember your password?]

Reset the setup items and enter the new password

by the following step:

•

When the TV/DVD do not run in the DVD mode, and while pressing and holding the STOP button on the TV/DVD, first press the TV button on the remote control, and then press the SLEEP button on the remote control and press the 1 button.

TD205.QX33 01.3.3 1:39 PM Page 32

Page 33

- 33 - EN

1B17

LANGUAGE CODE LIST

1 Afar 4747 2 Abkhazian 4748 3 Afrikaans 4752 4 Amharic 4759 5 Arabic 4764 6 Assamese 4765 7 Aymara 4771 8 Azerbaijani 4772

9 Bashkir 4847 10 Byelorussian 4851 11 Bulgarian 4853 12 Bihari 4854 13 Bislama 4855 14 Bengali;Bangla 4860 15 Tibetan 4861 16 Breton 4864 17 Catalan 4947 18 Corsican 4961 19 Czech 4965 20 Welsh 4971 21 Danish 5047 22 German (GER) 5051 23 Bhutani 5072 24 Greek 5158 25 English (ENG) 5160 26 Esperanto 5161 27 Spanish (SPA) 5165 28 Estonian 5166 29 Basque 5167 30 Persian 5247 31 Finnish 5255 32 Fiji 5256 33 Faroese 5261 34 French (FRE) 5264 35 Frisian 5271 36 Irish 5347 37 Scots Gaelic 5350 38 Galician 5358 39 Guarani 5360 40 Gujarati 5367 41 Hausa 5447 42 Hindi 5455 43 Croatian 5464 44 Hungarian 5467 45 Armenian 5471 46 Interlingua 5547 47 Interlingue 5551 48 Inupiak 5557 49 Indonesian 5560 50 Icelandic 5565 51 Italian (ITA) 5566 52 Hebrew 5569 53 Japanese (JPN) 5647 54 Yiddish 5655 55 Javanese 5669 56 Georgian 5747 57 Kazakh 5757 58 Greenlandic 5758 59 Cambodian 5759 60 Kannada 5760 61 Korean (KOR) 5761 62 Kashmiri 5765 63 Kurdish 5767 64 Kirghiz 5771 65 Latin 5847 66 Lingala 5860 67 Laothian 5861 68 Lithuanian 5866

No. Language Country code

69 Latvian;Lettish 5868 70 Malagasy 5953 71 Maori 5955 72 Macedonian 5957 73 Malayalam 5958 74 Mongolian 5960 75 Moldavian 5961 76 Marathi 5964 77 Malay 5965 78 Maltese 5966 79 Burmese 5971 80 Nauru 6047 81 Nepali 6051 82 Dutch (DUT) 6058 83 Norwegian 6061 84 Occitan 6149 85 (Afan)Oromo 6159 86 Oriya 6164 87 Panjabi 6247 88 Polish 6258 89 Pashto;Pushto 6265 90 Portuguese 6266 91 Quechua 6367 92 Rhaeto-Romance 6459 93 Kirundi 6460 94 Romanian 6461 95 Russian 6467 96 Kinyarwanda 6469 97 Sanskrit 6547 98 Sindhi 6550

99 Sangho 6553 100 Serbo-Croatian 6554 101 Singhalese 6555 102 Slovak 6557 103 Slovenian 6558 104 Samoan 6559 105 Shona 6560 106 Somali 6561 107 Albanian 6563 108 Serbian 6564 109 Siswat 6565 110 Sesotho 6566 111 Sundanese 6567 112 Swedish 6568 113 Swahili 6569 114 Tamil 6647 115 Telugu 6652 116 Tajik 6653 117 Thai 6654 118 Tigrinya 6655 119 Turkmen 6657 120 Tagalog 6658 121 Setswana 6660 122 Tonga 6661 123 Turkish 6664 124 Tsonga 6665 125 Tatar 6666 126 Twi 6669 127 Ukrainian 6757 128 Urdu 6764 129 Uzbek 6772 130 Vietnamese 6855 131 Volapuk 6861 132 Wolof 6961 133 Xhosa 7054 134 Yoruba 7161 135 Chinese (CHI) 7254 136 Zulu 7267

No. Language Country code

DVD

TD205.QX33 01.3.3 1:39 PM Page 33

Page 34

TROUBLESHOOTING GUIDE

Sometimes a performance problem can be easily solved by checking seemingly apparent but often overlooked possibilities. Before arranging for service, check these items. It could save your time and money.

Problem Corrective Action

Remote Control Doesn’t Work

•

Is TV/DVD plugged in?

•

Power at outlet?

•

Check batteries in Remote Control.

Bars On Screen

•

If outside antenna is being used, check for broken wire.

•

Check for local interference.

Picture Distorted or Blurred

•

Try a new channel, if OK, then possible station trouble.

•

If outside antenna is being used, check for broken wire.

Picture Rolls Vertically

•

Try a new channel, if OK, then possible station trouble.

Lines or Streaks in Picture

•

If outside antenna is being used, check for broken wire.

•

Check for local interference.

No Color

•

Try a new channel, if OK, then possible station trouble.

•

Is antenna connected to terminal on the back of the set?

•

If outside antenna is being used, check for broken wire.

•

Adjust COLOR control.

Poor Reception on Some Channels

•

Try a new channel, if OK, then possible station trouble.

Ghosts in Picture

•

Is antenna connected to terminal on the back of the set?

•

If outside antenna is being used, check for broken wire.

•

Check for local interference.

Weak Picture

•

Try a new channel, if OK, then possible station trouble.

•

Is antenna connected to terminal on the back of the set?

•

If outside antenna is being used, check for broken wire.

•

Adjust CONTRAST & BRIGHT control.

Sound OK, Picture Poor

•

Try a new channel, if OK, then possible station trouble.

•

Is antenna connected to terminal on the back of the set?

•

If outside antenna is being used, check for broken wire.

•

Check for local interference.

•

Adjust CONTRAST & BRIGHT control.

Picture OK, Sound Poor

•

Try a new channel, if OK, then possible station trouble.

•

Check for local interference.

No Picture or Sound

•

Try a new channel, if OK, then possible station trouble.

•

Is TV/DVD plugged in?

•

Power at outlet?

•

Is TV/DVD’S POWER button on?

•

Is antenna connected to terminal on the back of the set?

•

If outside antenna is being used, check for broken wire.

•

Turn off with POWER button and then turn it on after about a minute.

- 34 - EN

1B17

TD205.QX33 01.3.3 1:39 PM Page 34

Page 35

- 35 - EN

1B17

Closed Caption Problem Possible Remedy

My TV is showing captions • You are watching a live broadcast and spelling errors made by the that are misspelled. • closed captioning production company may pass through uncorrected.

• A prerecorded program will not show any misspelled words because

• of the normal time available for editing the captions.

My TV will not show the text • Captions that are delayed a few seconds behind the actual dialogue in its entirety or there is a delay of • are common for live broadcast. Most captioning production companies what is being said. • can display a dialogue to a maximum of 220 words per minute. If a

• dialogue exceeds that rate, selective editing is used to insure that the

• captions remain up-to-date with the current TV screen dialogue.

My captions are scrambled with • Interference caused by building, power lines, thunderstorms, etc. white boxes on the TV screen. • may cause scrambled or incomplete captions to appear.

My program guide listed a TV show

• Broadcasters may at times use a time compression process to the as being closed captioned but none • actual program so that additional advertising time can be given. of the captions were displayed. • Since the decoder cannot read the compressed information,

• captions will be lost.

My TV screen shows a black box • You are in the TEXT mode. Select CAPTION mode or CAPTION on certain channels. • [OFF].

TD205.QX33 01.3.3 1:39 PM Page 35

Page 36

- 36 - EN

1B17

If the TV/DVD does not perform properly when operated as instructed in this Owner’s Manual, check the player, consulting the following checklist.

Symptom Cause Remedy

No power.

•

Loose power plug.

•

Insert the power plug firmly into the wall out-

let.

The player does not

•

The remote control is not aimed•Aim the remote control directly at the sensor

respond to the

•

at the sensor on the TV/DVD.

•

on the TV/DVD.

remote control.

•

Obstacles present between the

•

Remove the obstacles from the signal path.

•

remote control and the sensor.

•

The remote control is too far

•

Use the remote control within 7m of

•

away from the TV/DVD.

•

the TV/DVD.

•

Dead batteries.

•

Replace the batteries.

No picture

•

Loose video connection.

•

Connect the video cables firmly.

•

Wrong disc.

•

Insert a correct video disc that plays on this

•

TV/DVD.

Disc cannot be

•

No disc.

•

Insert a disc.

played

•

Dirty disc.

•

Clean the disc.

•

Disc is placed upside down.

•

Place the disc correctly, with the label side up.

•

Parental lock is active.

•

Cancel the parental lock or change the control

•

level.

No sound

•

Loose audio connection.

•

Connect the audio cables firmly.

•

The power of the connected

•

Turn the power of the audio component on.

•

audio component is off.

•

Wrong audio output settings.

•

Correct the audio output settings.

•

Wrong input settings on the

•

Correct the input settings on the audio

•

connected audio component.

•

component.

Distorted picture

•

Immediately after playing,

•

There are some cases where pictures may be

•

press fast forward or in reverse.•slightly distorted, which are not a sign of a

•

malfunction.

Audio or subtitle

•

The selected language is not

•

No malfunction.

language does not

•

available for audio or subtitles

match the setup.

•

on the DVD.

The camera angle

•

The DVD does not contain

•

No malfunction.

cannot be changed.

•

sequences recorded from

•

different camera angles.

Audio or subtitle

•

The DVD does not contain

•

No malfunction.

language cannot be

•

audio source or subtitles in the

changed.

•

selected language.

"Prohibited icon"

•

That operation is prohibited by•No malfunction.

appears on the

•

the TV/DVD or disc. screen, prohibiting an operation.

CD sound dropout

•

Scratched disc

•

Replace the disc with unscratched one. No CD reproduction DVD picture dropout DVD picture freeze DVD picture in mosaic No DVD reproduction

NOTES:

•

Some functions are not available in specific modes, but this is not a malfunction. Read the description in this Owner’s Manual for details on correct operations.

•

Playback from a desired track and random playback are not available during program playback.

DVD

TD205.QX33 01.3.3 1:39 PM Page 36

Page 37

- 37 - EN

1B17

MAINTENANCE

CABINET CLEANING

•

Wipe the front panel and other exterior surfaces of the TV/DVD with a soft cloth immersed in lukewarm water and wrung dry.

•

Never use a solvent or alcohol. Do not spray insecticide liquid near the TV/DVD. Such chemicals may cause damage and discoloration to the exposed surfaces.

SERVICING

•

Should your TV/DVD become inoperative, do not try to correct the problem by yourself. There are no user-serviceable parts inside. Turn off, unplug the power cord, and please call our help line at 1-800256-2487, to locate an Authorized Service Center.

IF THE LASER OPTICAL PICKUP UNIT IS DIRTY

•

If the player still does not perform properly when it is operated while referring to the relevant sections and to "TROUBLESHOOTING GUIDE" in this Owner's Manual, the laser optical pickup unit may be dirty. Consult your dealer or an Authorized Service Center for inspection and cleaning of the laser optical pickup unit.

•

Use discs which have the following logos on them. (Optical audio digital discs.)

•

Handle the discs so that fingerprints and dust do not adhere to the surfaces of the discs.

•

Always store the disc in its protective case when it is not used.

DISC HANDLING

•

To clean-off, use a soft cloth.

•

Do not use a hard cloth since this will mar the disc.

•

Wipe the disc in a straight line from center to edge.

•

Never wipe with a circular motion.

•

Do not use detergent or abrasive cleaning agents.

TD205.QX33 01.3.3 1:39 PM Page 37

Page 38

- 38 - EN

1B17

SPECIFICATIONS

Television system: NTSC-M

TV Standard Closed caption system: §15.119/FCC Channel coverage:

VHF: 2 ~ 13 UHF: 14 ~ 69 CATV: 2 ~13, A~ W,

W+1 ~ W+84,

A-5 ~ A-1, 5A Tuning System: 181 channel

frequency synthesized

tuning system Channel access: Direct access keyboard,

programmable

scan and up/down

Product type: DVD Player Discs: DVD video, Audio CD Output signal format: NTSC color Frequency response (out put jack)

DVD (linear sound): 20 Hz to 22 kHz

(sample rate: 48 kHz)

20 Hz to 44 kHz

(sample rate: 96 kHz)

CD: 20 Hz to 20 kHz Signal-to-noise ratio (S/N ratio)(out put jack)

CD: 100 dB (EIAJ) Dynamic range (out put jack)

DVD (linear sound): 85 dB

CD: 84 dB (EIAJ) Total distortion factor

CD: 0.07% (EIAJ) Wow and flutter: Below the measurement

limitation (+/-0.001% W PEAK) (EIAJ)

•

Designs and specifications are subject to change without notice and without our legal obligation.

•

If there is a discrepancy between languages, the default language will be English.

DVD

GENERAL SPECIFICATIONS ELECTRICAL SPECIFICATIONS

Sound output: 2 speakers, 1W, 8 ohm

OTHER SPECIFICATIONS

Terminals

Antenna input: VHF/UHF/CATV

75 ohm unbalanced (F-type) Video input: RCA connector [ 1 Audio L/R input: RCA connector [ 2 Headphone: 1/8” stereo (3.5 mm) Coaxial digital audio output (only DVD): One pin jack,

500m Vpp (75 ohm) Analog audio L/R output (only DVD): RCA connector [ 2

Remote control: Digital encoded

infrared light system

Operating temperature: 5ºC to 40ºC

(41ºF~104ºF)

Power requirements: AC 120V, 60Hz Power consumption (Maximum): 95W Picture tube: 19" Dimensions: H:19-21/32” (499.5mm)

W:19-7/16” (494mm)

D:20-5/16” (465mm)

Weight: 44.1 lbs (20kg) Accessories: Remote Control Unit with

2"AA"batteries

Owner’s Manual

TD205.QX33 01.3.3 1:39 PM Page 38

Page 39

- 39 - ES

0I04

Bandeja de carga del disco

2. Toma de entrada de vídeo (VIDEO)– Se conecta a la toma de

salida de vídeo de una videocámara o videograbadora.

Tomas de entrada de audio izquierda/derecha (AUDIO L/R)–

Se conectan a las tomas de salida de audio de una videocámara o videograbadora.

Botón de alimentación (POWER)– Púlselo para conectar y

desconectar la alimentación.

Botones de volumen (VOLUME KK/L)– Púlselos para controlar

el nivel del sonido del reproductor DVD y del televisor.

Botones de canales (CHANNEL KK/L)– Púlselos para selec-

cionar los canales memorizados.

Ventanilla receptora de señales del mando a distancia

8. Botón de parada (STOP)– Detiene el disco.

Botón de rebobinado (REV)– Activa la reproducción en retro-

ceso rápido hasta un punto deseado.

10.

Botón de reproducción (PLAY)– Inicia la reproducción del

contenido del disco.

11.

Botón de avance (FWD)– Activa la reproducción en avance

rápido hasta un punto deseado.

12.

Botón de pausa (PAUSE)– Hace una pausa en el disco actual.

13.

Botón de abrir/cerrar (OPEN/CLOSE)– Púlselo para introducir

un disco en la bandeja o para sacarlo de ella.

14.

Toma de auriculares (HEADPHONE)– Para conectar unos

auriculares (no suministrados) y escuchar en privado.

15.

Botón del televisor (TV)– Púlselo para controlar el televisor.

16.

Botón numerados (NUMBER)– Modo del televisor:

Pulse dos dígitos para acceder directamente al canal deseado. No se olvide de pulsar "0" antes de introducir un canal de un solo dígito.

Botón +100–

Púlselo para seleccionar canales de televisión por cable con un número igual o superior al 100.

Modo del reproductor DVD:

Púlselo para introducir el número deseado.

Botón +10–

Púlselo para introducir números iguales o superiores al 10.

17.

Botón del temporizador para dormir (SLEEP)– Pulse el botón

SLEEP para visualizar el temporizador para dormir y activar la función. La hora de apagado puede determinarse mediante el número de veces que usted pulse el botón (0, 10, 20, 30, ... 90, 0 minutos).

18.

Botones de salto (SKIP)– Para saltar capítulo o pistas hasta un

punto deseado.

19.

Botón de modo (MODE)– Activa el modo de reproducción de

programas o de reproducción aleatoria.

20.

Botón de preparación (SETUP)– Púlselo para introducir el

modo de preparación o para cambiar ítems de preparación.

21.

Botón de título (TITLE)– Visualiza el menú de títulos.

22.

Botón de cancelar (CLEAR)– Cancela un ajuste.

23.

Botón del visualizador (DISPLAY)– Modo del televisor:

Púlselo para visualizar el número del canal en la pantalla. Si lo presiona de nuevo, el número del canal desaparecerá.

Modo del reproductor DVD:

Visualiza el estado actual en la pantalla del televisor con fines de comprobación.

24.

Botón de modo búsqueda (SEARCH MODE)– Púlselo para

localizar el punto deseado.

25.

Botón de audio (AUDIO)– Púlselo para seleccionar el modo de

sonido o idioma de audio deseado.

26.

Botón de subtítulo (SUBTITLE)– Púlselo para seleccionar un

idioma de subtítulos deseado.

27.

Botón de repetición (REPEAT)– Repita la reproducción del

disco, título, capítulo o pista actual.

28.

Botón de ángulo (ANGLE)– Púlselo para cambiar el ángulo de

la cámara y ver la escena reproduciéndose desde un ángulo diferente.

29.

Botón de repetición A-B (A-B REPEAT)– Repite la reproduc-

ción de una sección seleccionada.

30.

Botón de retorno (RETURN)– Se utiliza para volver a la

operación anterior.

31.

Botón de aceptación (ENTER)– Púlselo para aceptar un ajuste.

32.

Botones de flechas– Modo del televisor:

Púlselo para seleccionar un modo de ajuste en los menús que aparecen en la pantalla del televisor. Púlselo para seleccionar o ajustar desde un menú particular.

Modo del reproductor DVD:

Se utiliza para hacer ajustes mientras se observa la visualización en la pantalla del televisor.

33.

Botón de menú (MENU)– Visualiza los menús del reproductor

DVD y del televisor.

34.

Botón de selección (SELECT)– Púlselo para cambiar al modo

del televisor, al modo de entrada exterior o al modo del reproductor DVD.

35.

Botón de silenciamiento (MUTE)– Púlselo para apagar el

sonido de un programa de televisión. (La visualización del nivel del sonido cambia de AZUL CLARO a ROJO CLARO.) Pulse de nuevo este botón o pulse el botón VOL K o L para reponer el sonido.

36.

Botón DVD– Púlselo para controlar el reproductor DVD.

37.

Cable de alimentación– Conéctelo a una toma de CA estándar

(120 V/60 Hz).

NOTA: Retire el cable de alimentación del gancho para impedir

que se rompa algún hilo conductor antes de conectar el cable a una toma de CA.

38.

Toma de salida de audio digital COAXIAL– Conéctela a la

entrada digital de un amplificador o descodificador exterior.

39.

Toma de salida de audio izquierda/derecha (AUDIO L/R)–

Conéctela a la entrada de audio digital de un amplificador o descodificador exterior.

40.

Toma de entrada de antena (ANT.)– Conéctela a una antena,

sistema de televisión por cable o sistema de televisión por satélite.

CONEXIONES DE ANTENA/TELEVISIÓN POR CABLE

ANTENA COMBINADA DE VHF/UHF

La antena de varilla de VHF/UHF (no suministrada) puede desmontarse. Inserte el vástago de la antena en el agujero de la parte superior trasera del televisor/reproductor DVD. Conecte la antena de varilla de VHF/UHF o la antena combinada de VHF/UHF en el terminal ANT. del televisor/reproductor DVD como se muestra en el diagrama de abajo. Para obtener la mejor recepción, extienda completamente la antena de varilla de VHF/UHF y haga los ajustes necesarios. (Evite tocar la sección superior cuando haga el ajuste.)

CONTROLES DE OPERACIÓN Y

SUS FUNCIONES

Consulte las figuras 1-3 de las páginas 8 y 9.

•

Para utilizarlo como mando a distancia del televisor, pulse el botón TV del mando a distancia después de seleccionar el modo del televisor. Los botones de control del televisor se indican en color azul o blanco.

•

Para utilizarlo como mando a distancia del reproductor DVD, pulse el botón DVD del mando a distancia después de seleccionar el modo del reproductor DVD. Los botones de control del reproductor DVD se indican en color amarillo o blanco.

PREPARACIÓN PARA LA UTILIZACIÓN

TD205ES.QX33 01.3.3 1:41 PM Page 39

Page 40

- 40 - ES

0I04

NOTA:Antes de conectar la antena de varilla en el terminal de antena, compruebe que la clavija no esté doblada. Si lo está, enderécela como se muestra en la ilustración, y luego conecte la clavija en el terminal de la antena.

NOTA: La conexión de una antena interior tal vez no ofrezca siempre una recepción de televisión aceptable.

ANTENAS SEPARADAS DE VHF/UHF

En algunas zonas será necesario utilizar una antena exterior.

TELEVISIÓN POR CABLE SIN CAJA DE CONVERSIÓN/DESCODIFICADOR

Utilice esta conexión si su sistema de televisión por cable se conecta directamente a su televisor/reproductor DVD sin caja de conversión.

TELEVISIÓN POR CABLE CON CAJA DE CONVERSIÓN/DESCODIFICADOR O CAJA DE TELEVISIÓN POR SATÉLITE

Si sus servicio de televisión por cable le suministra una caja de conversión, o si usted utiliza un sistema de televisión por satélite, usted podrá utilizar la conexión básica mostrada aquí.

INSTALACIÓN DE LAS PILAS

1) Abra la cubierta del compartimiento de las pilas presionando la cubierta del mando a distancia en el sentido de la flecha.

2) Inserte 2 pilas "AA" en el compartimiento de las pilas, en el sentido indicado por las marcas de polaridad (+/-).

3) Vuelva a poner la cubierta.

CONEXIÓN ATOMAS DE ENTRADA EXTERIOR

Cuando vea un programa grabado en otra fuente (videograbadora o videocámara), utilice las tomas de entrada de audio/vídeo de la parte delantera del televisor/reproductor DVD.

Conecte las tomas de salida de audio/vídeo de otra fuente a las tomas AUDIO L/R y VIDEO de este televisor/reproductor DVD. Y luego pulse el botón SELECT hasta que aparezca "AUX" en la pantalla.

NOTA:

•

Cuando conecte una videograbadora mono (otra fuente) a este televisor/reproductor DVD, conecte la toma de salida de audio de la videograbadora mono (otra fuente) a la toma AUDIO L de este televisor/reproductor DVD. El audio saldrá por los canales L y R de la misma forma.

CONEXIÓN A UN SISTEMA ESTÉREO (Para DVD)

NOTAS:

•

Asegúrese de desconectar la alimentación de todos los componentes del sistema antes de hacer conexiones a otro componente.

•

Consulte también los manuales de instrucciones del sistema estéreo y de otros componentes que vayan a ser conectados al televisor/reproductor DVD.

CONEXIÓN A UN AMPLIFICADOR EQUIPADO CON TOMAS DE ENTRADA DIGITAL, PLATINA MD O PLATINADAT (Para DVD)

Utilice un cable de audio digital coaxial (de venta en el comercio) para hacer las conexiones de audio.

NOTAS:

•

La fuente de audio de un disco del formato de sonido ambiental Dolby Digital de 5,1 canales no puede grabarse como sonido digital por una platina MD o DAT.

•

Asegúrese de desconectar la alimentación de todos los componentes del sistema antes de hacer conexiones a otro componente.

•

Consulte también los manuales de los componentes que vayan a ser conectados al televisor/reproductor DVD.

•

En el modo de preparación, ponga DOLBY DIGITAL y DTS en APDO. para la salida de audio. Hacer la reproducción en un televisor/reproductor DVD utilizando ajustes incorrectos puede generar ruidos, y también puede estropear los altavoces.

•

Cuando ponga DOLBY DIGITAL en APDO. y 3D VIRTUAL en ENC. para la salida de audio en el modo de preparación y seleccione la fuente de audio en un formato de sonido ambiental Dolby Digital de 5,1 canales, el audio se silenciará.

CONEXIÓN A UN DESCODIFICADOR DOLBY DIGITAL O A UN DESCODIFICADOR DTS (Para DVD)

Si utiliza este televisor/reproductor DVD para reproducir en el formato de sonido ambiental Dolby Digital de 5,1 canales o en el formato de sonido ambiental DTS, el televisor/reproductor DVD dará salida al flujo de datos Dolby Digital o DTS desde su toma de salida de audio digital COAXIAL. Conectando el reproductor a un descodificador Dolby Digital o DTS, usted podrá disfrutar de un ambiente más convincente y real, con un sonido ambiental potente y de alta calidad de tipo profesional como el que puede oírse en los cines.

Utilice los cables digitales coaxiales de audio (de venta en el comercio) para hacer las conexiones de audio.

NOTAS:

•

Asegúrese de desconectar la alimentación de todos los componentes del sistema antes de hacer conexiones a otro componente.

•

Consulte también los manuales de los componentes que vayan a ser conectados al televisor/reproductor DVD.

•

Si hace la conexión a un descodificador Dolby Digital, en el modo de preparación, ponga DOLBY DIGITAL en ENC. para la salida de audio.

•

Si hace la conexión a un descodificador DTS, en el modo de

Clavija doblada

Cable Clavija

(Necesita ser enderezada)

(Clavija derecha)

Consulte la figura 4 de la página 10.

Consulte la figura 5 de la página 10.

Consulte la figura 6 de la página 11.

Consulte la figura 7 de la página 11.

Aviso a los instaladores de sistemas CATV:

Este aviso se incluye para que los instaladores de sistemas CATV tenga en cuenta el Artículo 820-40 del NEC, que proporciona consejos para hacer una conexión apropiada a tierra y, en particular, especifica que el cable de tierra deberá conectarse a un sistema de puesta a tierra del edificio tan cerca del punto de entrada del cable como sea posible.

Consulte la figura 8 de la página 12.

Consulte la figura 9 de la página 13.

Consulte la figura 10 de la página 13.

Consulte la figura 11 de la página 14.

TD205ES.QX33 01.3.3 1:41 PM Page 40

Page 41

- 41 - ES

0C28

preparación, ponga DTS en ENC. para la salida de audio.

•

A menos que haga la conexión a un descodificador Dolby Digital o a un descodificador DTS, en el modo de preparación, ponga DOLBY DIGITAL y DTS en APDO. para la salida de audio. Hacer la reproducción en un televisor/reproductor DVD utilizando ajustes incorrectos puede generar ruidos, y también puede estropear los altavoces.

•

SECCIÓN DEL TELEVISOR

Para empezar

1) Conecte el cable de alimentación a una toma de CA estándar. NOTA: Si aparecen algunos dígitos en la esquina de la pantalla,

pulse el botón POWER sin desconectar el cable de alimentación.

2) Pulse el botón POWER para encender el televisor/reproductor DVD.

3) Pulse el botón SELECT del mando a distancia hasta que el número del canal o "TV" aparezca en la pantalla. Luego pulse el botón TV.

SELECCIÓN DE IDIOMA

Si desea cambiar el idioma del menú en pantalla, siga el procedimiento siguiente.

1) Pulse el botón MENU para que la visualización del menú aparezca en la pantalla del televisor.

2) Pulse el botón de flecha K o L para apuntar a "LANGUAGE".

3) Seleccione "ENGLISH" = inglés, "ESPAÑOL" o FRANÇAIS = francés utilizando el botón de flecha B o s.

4) Pulse el botón MENU para salir del menú.

NOTA: El idioma de la visualización en pantalla deberá seleccionase para el modo del televisor y el modo de DVD.

PREAJUSTE DE CANALES

Para preajustar un canal o cambiar un canal preajustado, siga el procedimiento siguiente.

1) Pulse el botón MENU para que la visualización del menú desaparezca de la pantalla del televisor.

2) Pulse el botón de flecha K o L para apuntar a "CANAL PREP.". Y luego pulse el botón de flecha B.

3) Pulse el botón de flecha K o L para apuntar a "AUTOPRESELEC.". Luego, pulse el botón de flecha B.

El sintonizador explora y memoriza todos los canales activos en su área.

•

El televisor distingue entre los canales de televisión estándar y los canales de televisión por cable.

•

Cuando termine la acción de AUTOPRESELEC., el canal memorizado más baja volverá a aparecer en la pantalla.

•

Cuando pulse el botón de flecha K o L después de seleccionar AUTOPRESELEC., el sintonizador se detendrá en los canales memorizados solamente.

•

El televisor puede reconocer si los canales de televisión son CATV por las condiciones de la recepción. En este caso, intente de nuevo la acción de AUTOPRESELEC. en condiciones de recepción fina.

[FUNCIÓN DE AGREGAR/BORRAR]

1) Pulse el botón MENU para que la visualización del menú aparezca en la pantalla del televisor.

2) Pulse el botón de flecha K o L para apuntar a "CANAL PREP.". Y luego pulse el botón de flecha B.

3) Pulse el botón de flecha K o L para apuntar a "AGREGAR/ BORRAR". Y luego pulse el botón de flecha B.

4) Utilice el botón de flecha K o L para seleccionar el canal que desee memorizar o borrar de la memoria. NOTA: La visualización volverá a la pantalla en unos 10 segundos. Realice la función de "AGREGAR/BORRAR" mientras aparece la visualización en la pantalla.

•

Pulse el botón de flecha B o s para encender el número del canal en AZUL CLARO si desea agregar el canal a la memoria.

•

Pulse el botón de flecha B o s para encender el número del canal en ROJO CLARO si desea borrar el canal de la memoria.

5) Pulse el botón MENU para salir del menú.

SECCIÓN DEL REPRODUCTOR DVD

Para empezar

1) Conecte la alimentación del amplificador o de cualquier otro componente que esté conectado al televisor/reproductor DVD. (Cambie el sistema de entrada para que se adapte al televisor/reproductor DVD, y compruebe que el volumen del sonido sea el correcto.)

2) Pulse el botón POWER.

•

La alimentación se conectará.

3) Pulse el botón SELECT del mando a distancia hasta que "DVD" aparezca en la pantalla. Luego pulse el botón DVD.

REPRODUCCIÓN DE UN DVD VIDEO O UN CD DE AUDIO

1) Pulse el botón OPEN/CLOSE.

•

La bandeja del disco se abrirá.

2) Ponga un disco en la bandeja.

•

Asegúrese de que el disco esté bien colocado en la bandeja, con la cara de la etiqueta hacia arriba.

3) Pulse el botón PLAY.

•

La bandeja se cerrará automáticamente, y la reproducción empezará desde el primer capítulo o la primera pista del disco. Usted necesitará pulsar PLAY sólo cuando la bandeja haya sido cerrada pulsando el botón OPEN/CLOSE.

•

Cuando reproduzca un DVD que tenga grabado un menú de títulos, el menú podrá aparecer en la pantalla. En este caso, consulte "UTILIZACIÓN DEL MENÚ DE TÍTULOS".

4) Pulse el botón STOP para detener la reproducción.

NOTAS:

•

Durante la operación puede aparecer un "icono de prohibición" en la parte inferior derecha de la pantalla del televisor, avisándole que el televisor/reproductor DVD o el disco han encontrado una operación prohibida.

•

Si un disco está sucio o tiene rayas, las imágenes pueden aparecer distorsionadas y la operación de reproducción tal vez se detenga. En tales casos, limpie el disco y desenchufe el cable de alimentación, y luego vuelva a conectarlo antes de reanudar la reproducción.

•

Con DVDs que utilicen algunos títulos para reproducir señales de programas, la reproducción tal vez empiece desde el segundo título, o puede que omita estos títulos.

•

Suponga que la unidad esté apagada o en otro modo que DVD. Pulse el botón PLAY u OPEN/CLOSE de la unidad, y la unidad se pondrá en el modo DVD para reproducir DVDs.

•

Para poner en funcionamiento el reproductor DVD, pulse el botón PLAY u OPEN/CLOSE.

Laboratories.Todos los derechos quedan reservados.

“DTS” y “DTS Digital Out”son marcas comerciales de Digital Theater Systems, Inc.

PREPARACIÓN PARA LA UTILIZACIÓN

REPRODUCCIÓN DE UN DISCO

DVD CD

TD205ES.QX33 01.3.3 1:41 PM Page 41

Page 42

- 42 - ES

0C28

UTILIZACIÓN DE LOS MENÚS DE DVD

Algunos DVDs tienen sus propios menús como, por ejemplo, un menú guía que describe el contenido del disco o un menú de selección para seleccionar el sonido, el idioma y otros ajustes personalizados.

1) Pulse el botón MENU.

•

El menú DVD aparecerá.

2) Seleccione el título deseado.

•

Pulse los botones de las flechas (K/L/B/s) para cambiar el ajuste, y luego pulse el botón ENTER.

3) La reproducción empezará desde el título seleccionado.

UTILIZACIÓN DEL MENÚ DE TÍTULOS

Con un DVD que tenga un menú de títulos, usted podrá seleccionar los títulos deseados en el menú.

1) Pulse el botón TITLE.

•

El menú de títulos aparecerá.

2) Seleccione el título deseado.

•

Pulse los botones de las flechas (K/L/B/s) para cambiar el ajuste, y luego pulse el botón ENTER.

RECUPERACIÓN DE UNA PANTALLA DE MENÚS DURANTE LA REPRODUCCIÓN

Para DVDs

•

Pulse el botón MENU para recuperar el menú del DVD.

•

Pulse el botón TITLE para recuperar el menú de títulos.

NOTA:

•

El contenido de los menús y las operaciones con menús correspondientes pueden cambiar según los discos, Consulte el manual entregado con el disco para conocer detalles.

DVD

TD205ES.QX33 01.3.3 1:41 PM Page 42

Page 43

- 43 - ES

0C28

MEMO

TD205ES.QX33 01.3.3 1:41 PM Page 43

Page 44

LIMITED WARRANTY

FUNAI CORP. will repair this Emerson product, free of charge in the USA in the event of defect in materials or workmanship as follows:

DURATION: PARTS: FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year from

the date of original retail purchase. Two (2) years for Picture Tube. Certain parts are excluded from this warranty.

LABOR: FUNAI CORP. will provide the labor without charge for a period of ninety (90) days from the date

of original retail purchase.

LIMITS AND EXCLUSIONS:

This warranty is extended only to the original retail purchaser. A purchase receipt or other proof of original retail purchase will be required together with the product to obtain service under this warranty.

This warranty shall not be extended to any other person or transferee. This warranty is void and of no effect if any serial numbers on the product are altered, replaced, defaced, missing

or if service was attempted by an unauthorized service center. This FUNAI CORPORATION Limited warranty does not apply to any product not purchased and used in the United States.

This warranty only covers failures due to defects in material or workmanship which occurs during normal use. It does not cover damage which occurs in shipment, or failures which are caused by repairs, alterations or product not supplied by FUNAI CORP., or damage which results from accident, misuse, abuse, mishandling, misapplication, alteration, faulty installation, improper maintenance, commercial use such as hotel, rental or office use of this product or damage which results from fire, flood, lightning or other acts of God.

THIS WARRANTY DOES NOT COVER PACKING MATERIALS, ANY ACCESSORIES (EXCEPT REMOTE CONTROL), ANY COSMETIC PARTS, COMPLETE ASSEMBLY PARTS, DEMO OR FLOOR MODELS.

FUNAI CORP. AND ITS REPRESENTATIVES OR AGENTS SHALL IN NO EVENT BE LIABLE FOR ANY GENERAL, INDIRECT OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR OCCASIONED BY THE USE OF OR THE INABILITY TO USE THIS PRODUCT. THIS WARRANTY IS MADE IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, AND OF ALL OTHER LIABILITIES ON THE PART OF FUNAI, ALL OTHER WARRANTIES INCLUDING THE WARRANTYOF MERCHANTABILITY, AND FITNESS FOR APARTICULAR PURPOSE, ARE HEREBY DISCLAIMED BY FUNAI AND ITS REPRESENTATIVES IN THE UNITED STATES. ALL WARRANTYINSPECTIONS AND REPAIRS MUST BE PERFORMED BY A FUNAI AUTHORIZED SERVICE CENTER. THIS WARRANTYIS VALID WHEN THE UNIT IS CARRIED-IN TO FUNAI AUTHORIZED SERVICE FACILITY.

IMPORTANT:

THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, YOU MAY HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE, IF, AT ANY TIME DURING THE WARRANTY PERIOD, YOU ARE UNABLE TO OBTAIN SATISFACTION WITH THE REPAIR OF THIS PRODUCT, PLEASE CONTACT FUNAI CORP

ATTENTION:

FUNAI CORP. RESERVES THE RIGHT TO MODIFYANY DESIGN OF THIS PRODUCT WITHOUT PRIOR NOTICE.

To locate your nearest Emerson Authorized Service Center or for general service procedure, please call 1-800-256-2487 or write to the following:

FUNAI CORPORATION, INC.

Factory Service Center

100 North Street; Teterboro, NJ 07608

Tel :1-800-256-2487

PLEASE DO NOT SHIP YOUR UNIT TO THE TETERBORO ADDRESS.

Printed in China 0EMN01833

TD205UF ★ ★ ★ ★ ★

TD205BCV.QX33 01.3.3 1:41 PM Page 44

Page 45

documentation manual, user maintenance, brochure, user reference, pdf manual

This file has been downloaded from:

User Manual and User Guide for many equipments like mobile phones, photo cameras, monther board, monitors, software, tv, dvd, and othes..

Manual users, user manuals, user guide manual, owners manual, instruction manual, manual owner, manual owner's, manual guide,

manual operation, operating manual, user's manual, operating instructions, manual operators, manual operator, manual product,