FUNAI EC313E User Manual

Size:
612.35 Kb
Download

OWNER’S

MANUAL

13-INCHCOLOR TV/VCR

EC313E

As an ENERGYSTAR®

Partner, our company has determined that this product meets the ENERGY STAR® guidelines for energy efficiency. ENERGY STAR® is a U.S. registered mark.

INSTRUCCIONES EN ESPAÑOL INCLUIDAS.

If you need additional assistance for set-upor operating after reading owner’s manual, please callTOLL FREE : 1-800-827-0036.

Please read before using this equipment

PORTABLE CART WARNING
S3126A
S3126A
SYMBOLE D'AVERTISSEMENT POUR
LES COMPOSANTES
APPAREIL ET MEUBLE A ROULETTES

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The caution marking is located on the rear of the cabinet.

THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT.

THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING AND MAINTENANCE INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE APPLIANCE.

IMPORTANT SAFEGUARDS

1.Read instructions-Allthe safety and operating instructions should be read before the appliance is operated.

2.Retain Instructions-Thesafety and operating instructions should be retained for future reference.

3.Heed Warnings-Allwarnings on the appliance and in the operating instructions should be adhered to.

4.Follow Instructions-Alloperating and use instructions should be followed.

5.Cleaning-UnplugTV/VCR from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.

EXCEPTION: A product that is meant for uninterrupted service and, that for some specific reason, such as the possibility of the loss of an authorization code for a CATV converter, is not intended to be unplugged by the user for cleaning or any other purpose, may exclude the reference to unplugging the appliance in the cleaning description otherwise required in item 5.

6.Attachments-Donot use attachments not recommended by the TV/VCR manufacturer as they may cause hazards.

7.Water and Moisture-Donot use this TV/VCR nearwater-forexample, near a bath tub, wash bowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, and the like.

8.Accessories-Donot place this TV/VCR on an unstable cart, stand, tripod, bracket, or table. The TV/VCR may fall, causing serious injury to someone, and serious damage to the appliance. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the TV/VCR. Any

mounting of the appliance should follow the manufacturer’s instructions and should use a mounting

accessory recommended by the manufacturer. An appliance and

cart combination should be moved with care.

Quick stops, excessive force, and uneven surfaces may cause the

appliance and cart combination to overturn.

AMEUBLES- Cet appareil ne doit être placé que sur un meuble (avec ou sans roulettes) recommandé par le fabricant.

Si vous l’installez sur un meuble à roulettes, déplacez les deux ensembles

avec précaution. Un arrêt brusque, l’u-

tilisation d’une force excessive et des surfaces irrégulières risquent de déstabiliser l’ensemble et de le renverser.

9.Ventilation-Slotsand openings in the cabinet and the back or bottom are provided for ventilation and to ensure reliable operation of the TV/VCR and to protect it from overheating, and these openings must not be blocked or covered. The openings should never be blocked by placing the TV/VCR on a bed, sofa, rug, or other similar surface. This TV/VCR should never be placed near or over a radiator or heat register. This TV/VCR should not be placed in abuilt-ininstallation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instructions have been adhered to.

10.Power Sources-ThisTV/VCR should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your appliance dealer or local power company. For TV/VCRs intended to operate from battery power, or other sources, refer to the operating instructions.

11.Grounding or Polarization-This TV/VCR is equipped with a polarized alternating-current line plug(a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.

12.Power-Cord Protection-Power-supplycords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance.

- 2 -

EN

9I03

FIGURE A

EXAMPLE OF ANTENNA GROUNDING AS PER

NATIONAL ELECT RICAL CODE

 

 

 

 

 

 

ANTENNA

 

 

 

 

 

 

L EAD I N

 

 

 

 

 

 

W I R E

 

GROUND

 

C L A M P

 

 

 

 

 

 

ANTENNA

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

DI SCHARG E UN I T

 

 

 

 

 

 

(NEC SECTION 8 10 -20)

EL ECTRI C

 

 

 

 

 

 

SE RV I CE

 

 

 

 

 

 

EQ U I PMEN T

 

 

 

 

 

 

 

 

 

 

 

 

G RO UNDI NG CO NDUCTORS

 

 

 

 

 

 

(NEC SECTION 8 10 -21)

 

 

 

 

 

G RO UND CL AMPS

NEC - NATI O NAL EL ECTRI CAL CO DE

 

 

POWER SERVI C E G RO UNDI NG

 

 

 

EL EC TR O DE SYSTEM

S2 8 9 8 A

 

 

(NEC ART 2 50 , PART H)

13.Outdoor Antenna grounding-If an outside antenna or cable system is connected to the TV/VCR, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA No. 70, provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antennadischarge unit, connection to grounding electrodes, and requirements for the grounding electrode. (Fig. A)

14.Lightning-Foradded protection for this TV/VCR receiver during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the TV/VCR due to lightning andpower-linesurges.

15.Power Lines-Anoutside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.

16.Overloading-Donot overload wall outlets and extension cords as this can result in a risk of fire or electric shock.

17.Object and Liquid Entry-Neverpush objects of any kind into this TV/VCR through openings as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the TV/VCR.

18.Servicing-Donot attempt to service this TV/VCR yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

19.Damage Requiring Service-Unplug this TV/VCR from the wall outlet and refer servicing to qualified service personnel under the following conditions:

a.When the power-supplycord or plug is damaged or frayed.

b.If liquid has been spilled, or objects have fallen into the TV/VCR.

c.If the TV/VCR has been exposed to rain or water.

d.If the TV/VCR does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions, as improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the TV/VCR to its normal operation.

e.If the TV/VCR has been dropped or damaged in any way.

f.When the TV/VCR exhibits a distinct change in perfor- mance-thisindicates a need for service.

20.Replacement Parts-Whenreplacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, injury to persons or other hazards.

21.Safety Check-Uponcompletion of any service or repairs to this TV/VCR, ask the service technician to perform routine safety checks to determine that the TV/VCR is in proper operating condition.

22.Heat-ThisTV/VCR product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat.

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

ATTENTION: POUR ÉVITER LES CHOC ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU’AU FOND.

- 3 -

EN

9I03

PRECAUTIONS

LOCATION

For safe operation and satisfactory performance of your TV/VCR, keep the following in mind when selecting a place for its installation:

Shield it from direct sunlight and keep it away from sources of intense heat.

Avoid dusty or humid places.

Avoid places with insufficient ventilation for proper heat dissipation. Do not block the ventilation holes at the top or bottom of the unit. Do not place the unit on a carpet because this will block the ventilation holes.

Install unit in a horizontal position.

Avoid locations subject to strong vibration.

Do not place the TV/VCR near strong magnetic fields.

Avoid moving TV/VCR to locations where temperature differences are extreme.

AVOID THE HAZARDS OF ELECTRICAL SHOCK AND FIRE

Do not handle the power cord with wet hands.

Do not pull on the power cord when disconnecting it from an AC wall outlet. Grasp it by the plug.

If by accident, water is spilled on your unit, unplug the power cord immediately and take the unit to our Authorized Service Center for servicing.

Do not put your fingers or objects into the TV/VCR cassette holder.

Do not place anything directly on top of the unit.

WARNING

Moisture condensation may occur inside the unit when it is moved from a cold place to a warm place or after heating a cold room or under conditions of high humidity. If a tape is played in a TV/VCR which has moisture, it may damage the tape and TV/VCR. Therefore when the condensation occurs inside the unit, turn the POWER button on and allow at least 2 hours for the unit to dry out.

IMPORTANT COPYRIGHT INFORMATION

Unauthorized recording or use of broadcast television programming, video tape, film or other copyrighted material may violate applicable copyright laws. We assume no responsibility for the unauthorized duplication, use, or other acts which infringe upon the rights of copyright owners.

FCC WARNINGThis equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

1)Reorient or relocate the receiving antenna.

2)Increase the separation between the equipment and receiver.

3)Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

4)Consult the dealer or an experienced radio/TV technician for help.

The serial number of this product may be found on the back of the unit. No other TV/VCR has the same serial number as yours. You should record the number and other vital information here and retain this book as a permanent record of your purchase to aid identification in case of theft. Serial numbers are not kept on file.

Date of Purchase

Dealer Purchase from

Dealer Address

Dealer Phone No.

Model No.

Serial No.

- 4 -

EN

9I03

TABLE OF CONTENTS

C IMPORTANT SAFEGUARDS . . . . . . . . . . . . .2

C PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . .4

LOCATION . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

AVOID THE HAZARDS OF ELECTRICAL SHOCK AND FIRE . . . . . . . . . . . . . . . . . . . . . .4

WARNING . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

C FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

C SUPPLIED ACCESSORIES . . . . . . . . . . . . . . .6

C OPERATING CONTROLS AND FUNCTIONS 7

C PREPARATION FOR USE . . . . . . . . . . . . . . . .9

ANTENNA/CABLE CONNECTIONS . . . . . . .9 EXTERNAL INPUT MODE . . . . . . . . . . . . . .10 INSTALLING THE BATTERIES . . . . . . . . . . .10

C SET UP FOR USE . . . . . . . . . . . . . . . . . . . . .

10

SELECTING THE LANGUAGE . . . . . . . . . . .10 CLOCK SET UP (AUTO / MANUAL) . . . . . .10 DAYLIGHT-SAVINGTIME . . . . . . . . . . . . . .12 CHANNEL SET UP . . . . . . . . . . . . . . . . . . . .13 DELETING (OR ADDING) CHANNEL(S) . . .13

C TV OPERATION . . . . . . . . . . . . . . . . . . . . . . .14

WATCHING A TV PROGRAM . . . . . . . . . . . .14 GAME MODE . . . . . . . . . . . . . . . . . . . . . . . . .14 DEGAUSSING . . . . . . . . . . . . . . . . . . . . . . . .14 PICTURE CONTROL . . . . . . . . . . . . . . . . . . .14 CLOSED CAPTION SYSTEM . . . . . . . . . . . .15 V-CHIPSET UP . . . . . . . . . . . . . . . . . . . . . . . .15

C PLAYBACK . . . . . . . . . . . . . . . . . . . . . . . . . . .17

NORMAL PLAYBACK . . . . . . . . . . . . . . . . . .17 AUTO REPEAT PLAYBACK . . . . . . . . . . . . .17 SEARCH . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18 STILL PICTURE . . . . . . . . . . . . . . . . . . . . . . .18 PICTURE CONTROLS . . . . . . . . . . . . . . . . . .19

C RECORDING . . . . . . . . . . . . . . . . . . . . . . . . .19

NORMAL RECORDING . . . . . . . . . . . . . . . . .20

SKIPPING UNWANTED SCENES DURING RECORDING . . . . . . . . . . . . . . . . . . . . . . . . .20

OTR (One Touch Recording) . . . . . . . . . . . . . .20 TIMER RECORDING . . . . . . . . . . . . . . . . . . .21 TIMER PROGRAM EXTENSION . . . . . . . . .22

HINTS FOR AUTOMATIC TIMER RECORDING . . . . . . . . . . . . . . . . . . . . . . . . .23

AUTO RETURN . . . . . . . . . . . . . . . . . . . . . . .23 WAKE UP TIMER . . . . . . . . . . . . . . . . . . . . . .23 SLEEP TIMER . . . . . . . . . . . . . . . . . . . . . . . . .24

C COPYING A VIDEO TAPE . . . . . . . . . . . . . . .24

C ON SCREEN DISPLAY . . . . . . . . . . . . . . . . .25

C SPECIAL FEATURES . . . . . . . . . . . . . . . . . .25

REAL TIME TAPE COUNTER . . . . . . . . . . . .25 AUTO REWIND-EJECT . . . . . . . . . . . . . . . . .25

C MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . .25

C TROUBLESHOOTING GUIDE . . . . . . . . . . .26

C SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . .27

C CABLE CHANNEL DESIGNATIONS . . . . . .27

C WARRANTY . . . . . . . . . . . . . . . . . . .Back Cover

INDICE

CONTROLES DE OPERACIÓN Y

SUS FUNCIONES . . . . . . . . . . . . . . . . . . . . . . . .28 CONEXIONES DE ANTENA/CABLE . . . . . . . .30 MODO DE ENTRADA EXTERNA . . . . . . . . . . .30

SELECCION DE IDIOMA . . . . . . . . . . . . . . . . .30 AJUSTE DE CANAL . . . . . . . . . . . . . . . . . . . . .31 AJUSTE DEL RELOJ . . . . . . . . . . . . . . . . . . . . .31

A NOTE ABOUT RECYCLING

This product’s packaging materials are recyclable and can be reused. Please dispose of any materials in accordance with your local recycling regulations.

Batteries should never be thrown away or incinerated but disposed of in accordance with your local regulations concerning chemical wastes.

- 5 -

EN

9I03

FEATURES

Infrared remote control

Trilingual on screen menu display selectable in English, Spanish, or French

Real time counter–Thisshows the elapsed recording or playback time in hours, minutes and seconds. The“–”indication will appear when the tape is rewound further than the tape counter position “0:00:00”.

181 channel capability PLL frequency synthesizer tuner with direct station call–(A converter may be necessary to view scrambled cable channels.)

Auto Clock Setting–Allowsyou to set the clock function from a PBS broadcast station.

Closed caption system–Youmay view specially labeled (cc) TV programs, movies, news, prerecorded tapes, etc. with either a dialogue caption or text display added to the program.

Game mode–Automaticallysets external input mode and allows TV/VCR display to be suitable for use with TV games.

Auto power on and off system–Automatically turns on the TV/VCR when you insert the cassette, turns off after auto-rewind and ejects when the beginning of the tape is reached.

Auto rewind when the end of a tape is reached–This function doesn’t occur when using timer recording.

2 Step picture search operation–You can view a video program at a high speed or super high speed in either a forward or reverse direction in LP and SLP mode. For SP mode only high speed.

Three different playback tape speeds : SP/LP/SLP

Two different recording tape speeds : SP/SLP

Auto Head Cleaner–Automaticallycleans video heads as you insert or remove a cassette.

Zero Return–Thetape returns to counter of 0:00:00 by rewinding or fast forwarding.

Still–Freezethe picture at any time, for close viewing of a particular scene. Only tapes recorded in SLP mode will show a fairly clear picture.

Digital Auto Tracking (DTR)–Automatically adjusts the tracking for each tape you play.

Rental play mode–Improvesplayback picture quality from worn tapes, such as rental tapes.

Auto repeat–Allowsyou to repeat the playing of a tape indefinitely without pressing the PLAY button.

Time search–Letsyou set the TV/VCR to advance the tape by entering the desired playback time you want to skip.

OTR (One Touch Recording)–Instant timed recording from 30 to 480 minutes is possible at the push of the REC/OTR button.

1 Year, 8 events (including Daily and Weekly Timer Recording)–The built-in timer allows you to record up to 8 programs at different times on different channels up to 1 year in advance. The Daily timer allows recordings to be made of daily broadcasts and the Weekly timer allows recording to be made once a week up to the end of the tape.

Auto return–Aftertimer recording is finished, the TV/VCR can return to the beginning of the recording.

Wake up/Sleep timer–Allowsyou to have the TV/VCR automatically turn on or off at a desired time.

Timer Program Extension–Allows you to shift the time schedule for automatic timer recording.

V-CHIP–Enablesparents to prevent their children from watching inappropriate material on TV.

SUPPLIED ACCESSORIES

Remote Control Unit

2 AA Batteries

Rod Antenna

 

 

PART NO. (0EMN00673 or

 

 

0EMN01599 or 0EMN01755)

PART NO. (NE145UD)

 

 

If you need to replace these accessories, please refer to the PART NO. under the illustrations and call 1-800-827-0036.

Depending on your antenna system, you may need different types of Combiners (Mixer) or Separators (Splitter). Contact your local electronics store for these items.

We do not recommend the use of universal remote controls. Not all of the functions may be controlled with a universal remote control. If you decide to use a universal remote control with this unit, please be aware that the code number given may not operate this unit. In this case, please call the manufacturer of the universal remote control.

- 6 -

EN

9I03

OPERATING CONTROLS AND FUNCTIONS

NOTE:

We do not recommend the use of universal remote controls. Not all of the functions may be controlled with a universal remote control.

If you decide to use a universal remote control with this unit, please be aware that the code number given may not operate this unit. In this case, please call the manufacturer of the universal remote control.

- TV/VCR FRONT PANEL -

VIDEO

AUDIO

POWER

VOLUME

CHANNEL

STOP/EJECT REW

PLAY F.FWD REC/OTR

EARPHONE

1

2

3

4

5

6

7

8

9 10 11 12

13

14

- REMOTE CONTROL -

 

 

 

WAKE-UP

3

POWER

 

/SLEEP

EJECT

 

 

 

CHANNEL

 

 

 

 

 

 

 

 

RETURN

 

1

2

3

 

15

4

5

6

CHANNEL

 

 

 

 

 

7

8

9

 

 

 

0

+100

 

16

MENU

DISPLAY

MUTE

VOLUME

 

 

 

 

17

 

PLAY

 

8

 

 

REW

 

 

F.FWD

 

 

 

7

 

STOP

 

 

 

 

 

11

RECORD

 

SPEED

PAUSE/STILL

 

T-PROG.

 

 

18

 

GAME

TIME SEARCH

 

CLEAR

 

 

19

 

COUNTER

 

 

 

RESET

 

 

 

 

 

 

20

 

 

 

 

 

1

VIDEO input jack– Connect to the video output

25

 

jack of your video camera or another VCR.

2

AUDIO input jack– Connect to the audio output

 

7

jack of your audio equipment, video camera or

another VCR.

 

243 POWER button– Press to turn TV/VCR on and off. Press to activate timer recording.

4 VOLUME X / Y buttons– Adjust the volume level.

55 CHANNEL K / L buttons– Press to select the desired channels for viewing or recording.

You may display the main menu on the TV screen

4

by pressing repeatedly this button on the TV/VCR.

23

TRACKING function– Press to minimize video

‘noise’ (lines or dots on screen) during playback

9

10

mode. (See page 19.)

6Remote Sensor Window– Receives the infrared signals from the remote control.

227 EJECT button– Press in the Stop mode to remove tape from TV/VCR.

21STOP button– Press to stop the tape motion.

L button–

Press to select setting modes from the on screen menu.

Press to enter digits when setting program. (for example: setting clock or timer program)

- 7 -

EN

9I03

- REAR VIEW -

ANT.

8REW button– Press to rewind the tape, or to view the picture rapidly in reverse during playback mode. (Rewind Search)

s button–

Press to select a mode from a particular menu. (for example: LANGUAGE or USER’S SET UP)

9PLAY button– Press to begin playback.

K button–

Press to select setting modes from the on screen menu.

Press to enter digits when setting program. (for example: setting clock or timer program)

10F.FWD button– Press to rapidly advance the tape, or to view the picture rapidly in forward during playback mode. (Forward Search)

B button–

When setting program (for example: setting clock or timer program), press to determine your selection and proceed to the next step you want to input.

Press to determine setting modes from on screen menu.

Press to select a mode from a particular menu. (for example: LANGUAGE or USER’S SET UP)

11RECORD(REC) button– Press for manual recording. OTR button–Activates One Touch Recording. (only on the TV/VCR)

12RECORD indicator– Flashes during recording. Lights up in theStand-bymode for Timer Recording.

13EARPHONE jack– Connects to earphones (not supplied) for personal listening. The size of jack is 1/8” monaural (3.5mm).

14Cassette compartment

15Number buttons– Press to select desired channels for viewing or recording. To select channels from 1 to 9, first press the 0 button and then 1 to 9.

26 27

+100 button– When selecting cable channels which are higher than 99, press this button first, then press the last two digits. (To select channel 125, first press the “+100” button then press “2” and “5”).

16 MENU button– Press to display the main menu on the TV screen.

17 DISPLAY button– Display the counter or the current channel number and current time on the TV screen. (See page 25.)

18 SPEED button– Press to choose the desired recording speed:SP/SLP.

19 T-PROG. CLEAR button– Press to cancel a setting of timer program. (See page 23.)

COUNTER RESET button– Press to reset counter to 0:00:00.

20 GAME button– Sets the game mode and external input mode at the same time. (See page 14.)

21 TIME SEARCH button– Press to activate Time Search mode.

22 PAUSE/STILL button– Press to temporarily stop the tape during the recording or to view a still picture during playback.

23 MUTE button– Mutes the sound. Press it again to resume sound.

24 CHANNEL RETURN button–Press to go back to the previously viewed channel. For example, pressing this button once will change channel display from 3 (present channel) to 10 (previously viewed channel), and pressing it a second time will return from 10 to 3.

25 WAKE-UP/SLEEPbutton–Sets the Wake up or Sleep Timer. (See page 23.)

26 Power cord– Connect to a standard AC outlet (120V/60Hz).

27 ANT. terminal– Connect to an antenna or cable system.

- 8 -

EN

9I03

PREPARATION FOR USE

ANTENNA/CABLE CONNECTIONS

Satellite Box or Cable Box (Not supplied)

From Cable System or

 

 

Satellite Dish

Rod Antenna

VHF/UHF Antenna

OUT

(Supplied)

(Not supplied)

 

 

IN

 

 

 

 

VHF Antenna

 

 

(Not supplied)

From

 

or

UHF Antenna

Cable System

 

(Not supplied)

 

 

or VHF/UHF Combiner

 

ANT.

 

(Not supplied)

75-ohmCoaxial

or

 

 

 

 

 

Cable (Not supplied)

 

 

Flat twin-leadcable

 

 

or

 

 

 

VHF/UHF COMBINED ANTENNA

The VHF/UHF Rod Antenna (supplied) is detachable. Insert the stem of the antenna into the hole on the upper-backportion of the TV/VCR. Connect the VHF/UHF Rod Antenna or VHF/UHF Combination Antenna to the ANT. terminal of the TV/VCR as shown in the diagram above.

For the best reception, fully extend the VHF/UHF Rod Antenna and make the necessary adjustments. (Avoid touching the top section when adjusting.)

NOTE:

Before plugging the Rod antenna into antenna terminal, check that the pin is not bent. If it is bent, straighten the pin as illustrated, then plug the pin into antenna terminal.

Bent pin

Cable Plug

(Needs to be straightened)

(Straight pin)

NOTE:

The connection of an indoor antenna may not always give acceptable TV reception.

VHF/UHF SEPARATE ANTENNAS

In some areas it will be necessary to use an outdoor antenna.

CABLE WITHOUT CONVERTER/ DESCRAMBLER BOX

Use this connection if your cable system connects directly to your TV/VCR without a converter box. By using this connection you can:

1)Use the TV/VCR remote to select channels.

2)Program one or more unscrambled channels for Automatic Timer Recording.

NOTE: This unit willONLY record and view the same channel.

CABLE WITH CONVERTER/ DESCRAMBLER BOX OR SATELLITE BOX

If your cable service supplies you with a converter box or if you use a satellite system, you can use the basic connection shown here.

By using this connection you can also record scrambled channels. However, channel selection must be made with the converter box or satellite box. This means that channels cannot be changed using the TV/VCR Remote Control. Unattended timer recording is limited to one channel at a time.

Note to CATV system installer:

This reminder is provided to call the CATV system installer’s attention to Article 820-40of the NEC that provides guidelines for proper grounding and in particular, specifies that the cable ground shall be connected to the grounding system of the building as close to the point of cable entry as practical.

- 9 -

EN

9I03

TO RECORD A SCRAMBLED/UNSCRAMBLED CHANNEL

1.Set the TV/VCR channel selector to the output channel of the Cable Converter Box or Satellite Box. (Ex. CH3)

2.Select the channel to record from your Cable Converter Box or Satellite Box.

EXTERNAL INPUT MODE

When using an external input signal (another VCR or camcorder), connect the player’s audio/video output cables to the AUDIO IN/ VIDEO IN jacks of your TV/VCR. Then press the CHANNEL K orL button until “AUX” appears on the screen.

AUX

NOTE: “AUX” is found below the lowest memorized channel. (Example: CH2)

INSTALLING THE BATTERIES

1)Open the battery compartment cover by pressing the cover on the remote unit in the direction of the arrow.

2)Insert 2 “AA” penlight batteries into the battery compartment in the direction indicated by the polarity (+/-)markings.

3)Replace the cover.

SET UP FOR USE

SELECTING THE LANGUAGE

1 Plug in the TV/VCR power cord

Plug the TV/VCR power cord into a standard AC outlet.

NOTE:

If some digits appear in the corner of the screen, press the POWER button without unplugging the power cord.

Make sure ...

Press the POWER button to turn on the TV/VCR.NOTE: This function effects only the language on the screen menu and not the audio source.

2 Select “LANGUAGE”

– M E N U –

Press the MENU button on the

TIMER PROGRAMMING

PICTURE CONTROL

remote control.

SETTING CLOCK

USER’S SET UP

 

CHANNEL SET UP

Press the PLAY/K or STOP/L but-

V-CHIPSET UP

CAPTION [OFF]

 

B LANGUAGE [ENGLISH]

ton to point to “LANGUAGE”.

ZERO RETURN

TIME SEARCH

 

3 Select “ENGLISH”, “ESPAÑOL” or

“FRANÇAIS”

Select “ENGLISH”, “ESPAÑOL”= Spanish or “FRANÇAIS”= French using the F.FWD/B or REW/s button.

4 Exit the Language mode

Press the MENU button on the remote control to return to TV mode.

NOTE: If for some reason the menu is in Spanish or French, press the MENU button on the remote control, press the PLAY/K button to point to “IDIOMA [ESPAÑOL]” or “LANGAGE [FRANÇAIS]”, then press the F.FWD/B button, then press the MENU button on the remote control.

The TV/VCR clock must be set correctly before VCR timer recording is possible. It is suggested that the clock be set manually when first setting up the TV/VCR, then set to [ON] the auto clock setting which will periodically correct the setting if necessary. NOTE: If you cannot receive a station with time signals, auto clock setting cannot be performed. Use manual setting only.

- 10 -

EN

9I03

MANUAL CLOCK SETTING

Make sure ...

The TV/VCR is turned on.

In the example below, the clock is to

DATE

May 6th, 2004

SETTING TIME

5:40PM

1 Select “SETTING CLOCK”

Press the MENU button on the remote control.

Press the PLAY/K or STOP/L button to point to “SETTING CLOCK”.

Then press the F.FWD/B button.

– M E N U –

TIMER PROGRAMMING

PICTURE CONTROL

BSETTING CLOCK

CHANNEL SET UP USER’S SET UP V-CHIPSET UP

LANGUAGE [ENGLISH] CAPTION [OFF]

ZERO RETURN TIME SEARCH

2 Select “MANUAL CLOCK SET”

Press the PLAY/K or button to point to CLOCK SET”.

Then press the F.FWD/

3 Select the month

Press the PLAY/K or STOP/L button until your desired month appears. (Example: May05) Then press the F.FWD/B button.

4 Select the day

Press the PLAY/K or STOP/L button until your desired day appears. (Example: 6th06)

Then press the F.FWD/B button.

5 Select the year

Press the PLAY/K or STOP/L button until your desired year appears. (Example: 2004)

Then press the F.FWD/B button.

6 Select the hour

– MANUAL CLOCK SET –

Press the PLAY/K or STOP/L but-

MONTH DAY

 

YEAR

ton until your desired hour appears.

0 5

/ 0 6

THU

2 0 0 4

(Example: 5, PM)

HOUR

MINUTE

 

Then press the F.FWD/B button.

 

 

 

 

 

 

 

 

 

7 Select the minute

– MANUAL CLOCK SET –

Press the PLAY/K or STOP/L but-

MONTH DAY

 

YEAR

ton until the desired minute

0 5

/ 0 6

THU

2 0 0 4

 

 

 

 

appears. (Example: 40)

HOUR

MINUTE

 

 

0 5

: 4 0

PM

 

8 Start the clock

Press the MENU button on the

synchronize the clock with the

NOTE:

When unplugging the AC cord or if failure for more than 3 seconds, you reset the clock.

TO CHANGE CLOCK

If you want to change the clock,

1)Follow steps [1] and [2].

2)Select where you want to change F.FWD/B or REW/s button.

3)Enter correct numbers using the STOP/L button.

4)Press the MENU button on the start the clock.

PLEASE NOTE:

If there is no local PBS station in your cable system, select “AUTO press the F.FWD/B or REW/s this function. Then you can clock.

AUTOMATIC CLOCK

Make sure ...

The TV/VCR is turned on.

Confirm the TV/VCR is receiving Frequency) signal from either an

You must use the TV/VCR

form the clock setting procedure.

is connected

or satellite box, the on the cable box

be set to the box or satellite

nel 3 or 4), to be able to set up or automatically.

- 11 -

5:40 PM

EN

9I03

1 Select “SETTING CLOCK”

Press the MENU button on the remote control.

Press the PLAY/K or STOP/L button to select “SETTING CLOCK”. Press the F.FWD/B button to enter “SETTING CLOCK” menu.

– M E N U –

TIMER PROGRAMMING PICTURE CONTROL

BSETTING CLOCK CHANNEL SET UP USER’S SET UP

V-CHIPSET UP LANGUAGE [ENGLISH]

CAPTION [OFF] ZERO RETURN TIME SEARCH

2Set

Press “AUTO

3Begin “AUTO CLOCK CH

Press the STOP/L button to select “AUTO CLOCK CH SEARCH”.

Press the F.FWD/B button.

The TV/VCR is now searching for the station which contain the auto clock set signal. The search for a signal may take up to 20 seconds per channel.

“_ _” appears at the lower left of the screen when the search has ended.

Auto Clock stationwrite down the number(s) that appear on the screen. These are the auto clock station(s) in your area. See item 4 below.

If no number(s) appear on the TV no stations in your area which Clock signal. Auto Clock Setting Please use Manual Clock Setting

Press the MENU button to exit the NOTE: During Auto Clock CH may be distorted, this is normal.

4Enter the channel number Automatic Clock Setting

Press the MENU button on the Press the PLAY/K or STOP/L button to select “SETTING CLOCK”. Press the F.FWD/B button to enter “SETTING CLOCK” menu. Press the STOP/L button to select “AUTO CLOCK CH”.

Press the F.FWD/B or REW/s buttons until you locate Auto Clock Set station number. See item 3 above.

Press the MENU button to exit the screen.

– M E N U –

TIMER PROGRAMMING PICTURE CONTROL

BSETTING CLOCK

CHANNEL SET UP USER’S SET UP

V-CHIPSET UP LANGUAGE [ENGLISH]

CAPTION [OFF] ZERO RETURN TIME SEARCH

– SETTING CLOCK –

AUTO CLOCK

[ON]

AUTO CLOCK CH SEARCH

B AUTO CLOCK CH

[ 45]

MANUAL CLOCK SET

 

D.S.T.

[OFF]

5 Turn off the TV/VCR

Once the TV/VCR is turned off , it will periodically check and set the correct date and time.

DAYLIGHT-SAVINGTIME

Select this feature and the TV/VCR’s clock automatically will advance one hour in April, then reverse one hour in October.

When Daylight-SavingTime is ON, the clock will change automatically as follows:

First Sunday of April : At 2 AM the clock immediately changes to 3 AM. Any timer programming you have set to occur between 2 AM and 3 AM will not record.

Last Sunday of October : At 2 AM the clock immediately changes to 1 AM.

Make sure ...

Press the POWER button to turn on the TV/VCR.

1 Select “SETTING CLOCK”

Press the MENU button on the remote control.

Press the PLAY/K or STOP/L ton to point to “SETTING CLOCK”.

Then press the F.FWD/B button

– M E N U –

TIMER PROGRAMMING

PICTURE CONTROL

BSETTING CLOCK CHANNEL SET UP USER’S SET UP V-CHIPSET UP

LANGUAGE [ENGLISH]

CAPTION [OFF] ZERO RETURN TIME SEARCH

2 Set “D.S.T.”(Daylight-Saving

 

 

Press the PLAY/K or STOP/L but-

– SETTING CLOCK –

ton to point to “D.S.T.”.

AUTO CLOCK

[ON]

Then press the F.FWD/B or

AUTO CLOCK CH SEARCH

MANUAL CLOCK SET

[ 02 ]

 

AUTO CLOCK CH

REW/s button until [ON] appears.

B D.S.T.

[ON]

3 Exit theDaylight-SavingTime

Press the MENU button on the return to TV mode.

TO CANCEL THE

TIME

Repeat steps [1] to [2], select [OFF]

F.FWD/B or REW/s button.

- 12 -

EN

9I03

CHANNEL SET UP

You can program the tuner to scan all the channels you receive in your area.

NOTE: Channel setup is NOT needed when connected to a cable box or satellite box. Just select the TV/VCR channel selector to the output channel of the cable box or satellite box (Ex CH3), then select the channel to be viewed on the Cable Box or Satellite Box.

Make sure ...

Press the

1 Select “CHANNEL SET UP”

Press the MENU button on the remote control.

Press the PLAY/K or STOP/L button to point to “CHANNEL SET UP”.

Then press the F.FWD/B button.

– M E N U –

TIMER PROGRAMMING PICTURE CONTROL SETTING CLOCK

BCHANNEL SET UP

USER’S SET UP V-CHIPSET UP LANGUAGE [ENGLISH] CAPTION [OFF]

ZERO RETURN

TIME SEARCH

2 Begin auto preset

Press the PLAY/K or STOP/L button to point to “AUTO CH PROGRAMMING”.

Then press the F.FWD/B button. The tuner scans and memorizes all the active channels in your area.

– CHANNEL SET UP –

ADD / DELETE CH (CATV)

B AUTO CH PROGRAMMING

3 After scanning

The tuner stops on the lowest memorized channel.

When AUTO CH PROGRAMMING is activated where there is no TV signal input, “NO TV SIGNALS” will appear on the display after the completion of the channel scanning.

The TV/VCR may recognize TV channels to be CATV channels by the receiving conditions. In this case, try auto preset again in the fine receiving conditions.

DELETING (OR ADDING)

CHANNEL(S)

The channels you no longer receive or seldom watch can be deleted from the memory. (Of course, you can add the deleted channel into the memory again.)

1 Select “CHANNEL SET UP”

– M E N U –

TIMER PROGRAMMING

PICTURE CONTROL

SETTING CLOCK

B CHANNEL SET UP

USER’S SET UP

V-CHIPSET UP

LANGUAGE [ENGLISH]

CAPTION [OFF]

ZERO RETURN

TIME SEARCH

B

(CATV)

3 Enter the desired channel

Press the PLAY/K or STOP/L button until your desired channel number appears. (You can also use the number buttons or the CHANNELK/L button to enter it) (Example: CH8)

08

ADD / DELETE

You must precede single-digitwith a zero (Example: 02 ... 09).

When selecting cable channels than 99, press the +100 button last two digits. (Example: to first press the +100 button then

4Delete (or add) it from (into)

Press the F.FWD/B or REW/s number changes to light red. The from memory.

To delete another channel, repeat

If you press the F.FWD/B or REW/s button again, the channel is memorized again.

Added channel: Light blue. Deleted channel: Light red.

5Exit the channel setup mode

Press the MENU button on the remote control to return to TV mode.

NOTE: To confirm that channel(s) has been deleted or added, press the CHANNELK orL button.

- 13 -

EN

9I03

TV OPERATION

WATCHING A TV PROGRAM

1 Turn on the TV/VCR

Press the POWER button to turn on the TV/VCR.

2 Select the channel number

Press the CHANNEL K orL button to select your desired channel number or press the number buttons on the remote control.

Remember: If the TV/VCR is connected to a cable box or satellite box, the TV/VCR must be on CH3 or CH4, then the channel to be viewed must be selected on the cable box or satellite box.

3 Adjust sound

Press the VOLUME X orY button to adjust the volume.

VOLUME 20

C C C C C C C C C C C C

PICTURE CONTROL

The TV/VCR’s picture controls – BRIGHT, CONTRAST, COLOR, TINT andSHARPNESS – are preset to factory specifications. Although they are usually the best, you may need to make some further adjustments for a more natural looking image.

NOTES:

Procedures must be followed within 5 seconds or the Picture Control mode will be cancelled.

When setting the Picture Control, the Game mode will be cancelled.

Make sure ...

TV/VCR power must be turned on.

1 Select “PICTURE CONTROL”

– M E N U –

TIMER PROGRAMMING

B PICTURE CONTROL

SETTING CLOCK

CHANNEL SET UP

USER’S SET UP

V-CHIPSET UP

LANGUAGE [ENGLISH]

CAPTION [OFF]

ZERO RETURN

TIME SEARCH

GAME MODE

This function enables you to decrease contrast and making it suitable for GAME.

NOTE: This function can not be set

Press the GAME button on the

GAME

remote control. “GAME” appears

 

on the screen.

 

When you press the GAME button;

The TV/VCR comes on automatically

The TV/VCR will be in external matically.

TO CANCEL THE GAME

Press the GAME button or CHANNEL ton on the remote control.

DEGAUSSING

Magnetism from nearby appliances might affect the color of the TV picture.

If this happens, move this unit away from the appliance. If the color is still not correct, disconnect power cord from AC outlet then reconnect it after 30 minutes.

2 Select item you want to

Press the PLAY/K or STOP/L control is displayed.

BRIGHT CONTRAST COLOR TINT SHARPNESS

BRIGHT

P P P P P P P C P P P P P P P+

3 Adjust the picture control

Press the F.FWD/B or REW/s button to adjust to your desired level.

 

REW/s

F.FWD/B

BRIGHT

to decrease

to increase

 

brightness

brightness

CONTRAST

to decrease

to increase

 

contrast

contrast

 

 

 

COLOR

to pale

to brilliant

 

 

 

TINT

to purple

to green

 

 

 

SHARPNESS

to soft

to clear

 

 

 

If there is a power failure of any kind, the unit will retain its memory for this feature.

- 14 -

EN

9I03

CLOSED CAPTION SYSTEM

You can view specially labeled (cc) TV programs, movies, news and pre-recordedtapes with either a dialogue caption or text display.

CAPTION mode: By choosing the caption mode, you can watch dramas, movies and news while captioning the dialogues and the contents of news.

TEXT mode: By choosing the text mode, you can watch half screen text information if you want.1-2: You may get these captions or text information by selecting either “1” or “2”. Caption “2” is used, usually for a second language if available.

NOTE:

Not all programs are broadcast with Your television is designed to provide closed captions from high quality VCR signals. Conversely, poor quality likely to result in caption errors or no Common signal conditions which may errors are listed below:

Automobile ignition noise

Electric motor brush noise

Weak snowy reception on TV screen

Multiplex signal reception displaying ghosts or airplane flutter.

Playback of poorly recorded or worn

NOTE:

If the TV/VCR displays a black box screen, this means that the TV/VCR is set to the TEXT mode. To clear screen, select [CAPTION1], [CAPTION2] or [OFF].

Make sure ...

TV/VCR power must be turned on.

1 Select “CAPTION”

– M E N U –

Press the MENU button on the

TIMER PROGRAMMING

SETTING CLOCK

 

PICTURE CONTROL

remote control.

CHANNEL SET UP

USER’S SET UP

Press the PLAY/K or STOP/L but-

V-CHIPSET UP

LANGUAGE [ENGLISH]

B CAPTION [OFF]

ton to point to “CAPTION”.

ZERO RETURN

 

 

 

2 Select your desired caption

 

Press the F.FWD/B or REW/s

– M E N U –

button until your desired caption

TIMER PROGRAMMING

PICTURE CONTROL

menu appears.

SETTING CLOCK

USER’S SET UP

 

CHANNEL SET UP

([CAPTION1], [CAPTION2],

V-CHIPSET UP

B CAPTION [CAPTION1]

 

LANGUAGE [ENGLISH]

[TEXT1] or [TEXT2])

ZERO RETURN

TIME SEARCH

 

3 Exit the caption setting mode

Press the MENU button on the remote control to return to TV mode.

TO CANCEL THE CLOSED CAPTION SYSTEM

Repeat steps [1] and [2], select [OFF] using the F.FWD/B or REW/s button. Press the MENU button on the remote control to return to TV mode.

WHEN THE CLOSED CAPTION MODE IS ON

The On-ScreenDisplay will disappear after 5 seconds.

This is also true when the MUTE button is pressed or when the PAUSE/STILL button is pressed while recording.

If there is a power failure of any kind, the unit will retain its memory for this feature.

V-CHIPSET UP

V-CHIPenables parents to prevent their children from watching inappropriate material on TV.V-CHIPreads the ratings for programming (except for news and sports programs, unedited movies on premium cable channels and Emergency Broadcast System signals), then denies access to programming if the program’s rating meets the limitations you select. In this case, “PROTECTED PROGRAM by

...” message appears on the TV screen. To block ratings, follow the steps below.

Programming may be rated by the Motion Picture Association of America (MPAA) or according to the Television Parental Guidelines. In order to block any inappropriate programming, set your limits in both places (MPAA RATING and TV RATING).

TV RATING SET UP

Make sure ...

TV/VCR power must be turned on.

1 Select“V-CHIPSET UP”

Press the MENU button on the remote control.

Press the PLAY/K or STOP/L but ton to point to“V-CHIPSET UP” Then press the F.FWD/B button.

– M E N U –

TIMER PROGRAMMING PICTURE CONTROL

SETTING CLOCK

CHANNEL SET UP USER’S SET UP

BV-CHIPSET UP LANGUAGE [ENGLISH]

CAPTION [OFF] ZERO RETURN TIME SEARCH

2 Select “TV RATING”

V-CHIPSET UP –

Press the PLAY/K or STOP/L but-B

TV RATING

ton to point to “TV RATING”.

MPAA RATING

 

Then press the F.FWD/B button.

 

- 15 -

EN

9I03

3 Select your desired item

Press the PLAY/K or STOP/L button to point to your desired item.

Then, press the F.FWD/B button to select [BLOCK] or [VIEW].

 

B TV–Y

 

[VIEW]

 

TV–Y7(

)

[VIEW]

 

TV–G

 

[VIEW]

When you select the rating cate-

TV–PG(

)

[VIEW]

TV–MA(

)

[VIEW]

 

TV–14(

)

[VIEW]

gory and change it to [BLOCK],

 

 

 

the higher rating will change to

 

 

 

[BLOCK] automatically. Also, the

 

 

 

change to [VIEW] automatically.

 

 

 

When you change “TV-Y”to [VIEW], ings will change to [VIEW]

Selection

Rating Category

TV-Y

Appropriate for all

TV-Y7

Appropriate for children

TV-G

General Audience

TV-PG

Parental Guidance

TV-14

Unsuitable for children

 

 

TV-MA

Mature audience only

 

 

When you select TV-Y7,TV-PG,TV and you press the F.FWD/B button, will appear on the TV screen.

If you select the rating category

and change it to [BLOCK] or [VIEW], ings (example: V for Violence) will [BLOCK] or [VIEW] automatically. You can set the sub-ratingsto [BLOCK] individually when the rating category [BLOCK].

To set the sub-ratingsindividually, below.

When you select[TV-Y7]:

Press the STOP/L or PLAY/K

TV–Y7

 

[BLOCK]

B FV

 

[BLOCK]

button to select “FV” (Fantasy

 

 

 

 

Violence).

 

 

 

Then press the F.FWD/B button

 

 

 

to select [BLOCK] or [VIEW].

 

 

 

When you select[TV-PG],[TV-

 

 

 

Press the STOP/L or PLAY/K

 

 

 

button to select “D”(Suggestive

TV–PG

 

[BLOCK]

Dialog), “L”(Coarse Language),

B D

 

[BLOCK]

“S”(Sexual Situation) or

L

 

[BLOCK]

V

 

[BLOCK]

 

S

 

[BLOCK]

“V”(Violence). Then press the

 

 

 

F.FWD/B button to select

 

 

 

[BLOCK] or [VIEW].

 

 

 

Note: When you select[TV-MA],

 

 

 

appear on the TV screen.

 

 

 

Thesub-ratingswhich set to

B TV–Y

 

[VIEW]

[BLOCK] appears next to the rat-

TV–Y7(

)

[VIEW]

TV–G

 

[VIEW]

ing category in the TV RATING

TV–PG(DLSV )

[BLOCK]

TV–MA(

LSV)

[BLOCK]

 

TV–14(DLSV )

[BLOCK]

menu.

4 Exit theV-Chipsetting mode

Press the MENU button on the remote control to return to original mode.

1 Select“V-CHIPSET UP”

Press the MENU button on the remote control.

Press the PLAY/K or STOP/L but ton to point to“V-CHIPSET UP”. Then press the F.FWD/B button.

– M E N U –

TIMER PROGRAMMING PICTURE CONTROL

SETTING CLOCK

CHANNEL SET UP

USER’S SET UP

BV-CHIPSET UP LANGUAGE [ENGLISH]

CAPTION [OFF] ZERO RETURN TIME SEARCH

2 Select “MPAA RATING”

 

V-CHIPSET UP –

Press the PLAY/K or STOP/L but-

B

TV RATING

 

 

MPAA RATING

 

 

 

 

ton to point to “MPAA RATING”.

 

 

 

Then press the F.FWD/B button.

 

 

 

 

 

 

 

3 Select your desired item

 

 

 

Press the PLAY/K or STOP/L but-

 

 

 

ton to point to your desired item.

 

PG

[VIEW]

 

 

 

G

[VIEW]

Then press the F.FWD/B button to

 

PG–13

[VIEW]

 

NC–17

[BLOCK]

 

 

B

R

[BLOCK]

select [BLOCK] or [VIEW].

 

X

[BLOCK]

 

 

 

 

 

 

 

 

Selection

Rating Category

 

 

 

G

General Audience

 

 

 

PG

Parental Guidance

 

 

 

PG-13

Unsuitable for children

 

 

 

RRestricted; under 17 nying parent or adult

NC-17No one under 17

XMature audience only

When you select the rating category and change it to [BLOCK], the higher rating will change to [BLOCK] automatically. Also, the lower rating will change to [VIEW] automatically.

When you change “G” to [VIEW], all ratings will change to [VIEW] automatically.

4 Exit theV-Chipsetting mode

Press the MENU button on the remote control to return to original mode.

- 16 -

EN

9I03

PLAYBACK

This TV/VCR will operate with any cassette that has the mark. For best results, we recommend the use ofhigh-qualitytapes. Do not use poor quality or damaged tapes.

INSERTING A CASSETTE

Insert the cassette in the direction as shown. Push in gently, but continuously, on the center-backof the cassette until it is drawn into the TV/VCR. The TV/VCR will automatically turn on.

Window

CORRECT

WRONG

PRECAUTIONS

Avoid moisture. Moisture condensation may occur on the tape if it is moved from a cold place to a warm place or visa versa. Before using a tape with these conditions, to avoid damage of the tape and your TV/VCR, wait until the tape has warmed to room temperature and the moisture has evaporated.

Avoid extreme heat, high humidity and magnetic fields.

Do not tamper with the cassette mechanism.

Do not touch the tape with your fingers.

NORMAL PLAYBACK

Make sure ...

TV/VCR power must be turned on

1 Insert a prerecorded tape

If the erase-protectiontab has been TV/VCR will start playback automatically

2

To begin playback

B

 

Press the PLAY button.

Note: If any menu is activated on the screen, the PLAY button does not function. Press the MENU button to clear the menu. then, press the PLAY button.

3

To stop playback

STOP

 

Press the STOP button when playback is completed.

AUTO REPEAT PLAYBACK

The TV/VCR has the auto repeat

you to repeat a tape indefinitely without PLAY button.

ALL REPEAT: Repeat playback from to the end of the tape.

BLANK REPEAT: Repeat playback ning to a blank part, which is blank 10 seconds.

1 Select “USER’S SET UP”

Press the MENU button on the remote control.

Press the PLAY/K or STOP/L button to point to “USER’S SET UP”. Then press the F.FWD/B button.

– M E N U –

TIMER PROGRAMMING PICTURE CONTROL SETTING CLOCK CHANNEL SET UP

BUSER’S SET UP

V-CHIPSET UP LANGUAGE [ENGLISH] CAPTION [OFF]

ZERO RETURN

TIME SEARCH

2 Select “ALL” or “BLANK”

 

 

Press the PLAY/K or STOP/L button

 

“REPEAT PLAY”.

– USER’S SET UP –

Press the F.FWD/B or REW/s

RENTAL

[OFF]

button repeatedly until your desired

AUTO RETURN

[OFF]

 

B REPEAT PLAY

[ALL]

selection [ALL] or [BLANK] appears.

3 Exit the Repeat Play setting

Press the MENU button on the remote control to return to the TV mode.

4 Start playback

Press the PLAY button to start the Repeat Play. “REPEAT PLAY B” appears.

Once you select the Repeat Play mode, it stays in effect even after you turn off the TV/VCR.

If the Rental mode is set [ON], the “RENTAL PLAY B” display has priority.

TO CANCEL THE REPEAT PLAY MODE

Repeat steps [1] and [2], select [OFF] using the F.FWD/B or REW/s button on the remote control. Press the MENU button on the remote control to return to TV mode.

If there is a power failure of any kind, the unit will retain its memory for this feature.

- 17 -

EN

9I03

TIMER PROGRAMMING PICTURE CONTROL
SETTING CLOCK
CHANNEL SET UP
USER’S SET UP
V-CHIP SET UP LANGUAGE [ENGLISH]
CAPTION [OFF] B ZERO RETURN
TIME SEARCH
– M E N U –

SEARCH

PICTURE SEARCH

This feature is very useful in finding or skipping over a particular scene on a tape. In this mode, the sound will be muted.

1)You may view a video tape at a high speed in either a forward or reverse direction by pressing the F.FWD/B or REW/s button during playback. (in the SP / LP / SLP modes)

2)Press it again and the TV/VCR will now search in super high speed. (in the LP / SLP modes only) NOTE: Tapes recorded in the SP or LP mode will display a noise bar on the TV screen and the picture may revert to Black and White. This is normal.

3)Press the PLAY/K button to return to normal speed.

ZERO RETURN

This function allows you to search easily a beginning point that you want to review by rewinding or fast forwarding.

NOTE:

Zero Return WILL NOT work on a blank tape or a blank portion of a tape.

1 Stop a tape at your desired point

Rewind or fast forward the tape to the beginning point at which you want to review.

2 Reset the counter to 0:00:00

Press the COUNTER RESET button repeatedly.

3Begin recording or playback

Press the RECORD or PLAY button.

Press the STOP button when recording or playback is completed.

4To activate “ZERO RETURN” mode

Press the MENU button on the remote control. Press the PLAY/K or STOP/L button to point to “ZERO RETURN”.

Then press the F.FWD/B button. The counter will appear on the TV screen.

The tape will automatically stop when the counter returns to 0:00:00.

TIME SEARCH

The Time Search function makes it possible to quickly advance the tape to your desired position simply by entering the exact amount of playback time you want to skip.

NOTES:

Time Search can be set up to a maximum of 9 hours 50 minutes (9:50) by 10 minutes at a time.

This function will not operate in recording mode. In the example below: To watch a program after 2 hour 50 minutes from the present position, in either direction.

1Insert a tape.

2Select “TIME SEARCH” mode

Press the TIME SEARCH button (with each push it will increase by 10 minute).

3 Enter your desired time

TIME SEARCH

2 : 50

Press the PLAY/K or STOP/L button until your desired time appears. (Example: “2:50” stands for 2 hours 50 minutes)

If you wish to cancel the Time Search press the MENU button on the remote

4 Begin Time Search

By pressing the REW/s or F.FWD/ TV/VCR will rewind or fast forward point.

The time counts down as the searching When 0:00 is reached, the tape will automatically.

TO CANCEL THE TIME point

Press the STOP/EJECT button on the remote control. This will delete the

STILL PICTURE

You can view a still picture on the TV screen during playback (the Still mode). Press the PAUSE/STILL button during playback. Only tapes recorded in the SLP mode will show the least amount of lines. Press the PLAY button to return to playback.

NOTES:

Usually there will be video “noise” lines (black and white streaks or dots) on the screen. This is normal.

If the tape was originally recorded in SP or LP mode, the still picture will be black and white in addition to the “noise” lines.

This is not a fault of the machine, but is a byproduct of the technology involved in producing a TV/VCR with 2 video heads.

If it is left in the Pause mode for more than five minutes, the TV/VCR will automatically switch to the Stop mode.

- 18 -

EN

9I03

NOISE CANCEL (in the Still mode)

This feature allows you to reposition or reduce the noise lines of a still picture. Press the PAUSE/STILL button so that the noise lines change position on the screen so you can see the picture in its entirety without distracting noise lines.

NOTE: This feature can be activated ONLY when viewing a tape recorded in the SLP mode. If the tape was originally recorded in the SP or LP mode, the still picture may revert to black and white in addition to the “noise bars”. This is normal.

VERTICAL HOLD CONTROL

If the picture begins to vibrate vertically while in Pause/Still mode, stabilize the picture by pressing the CHANNEL K orL button.

NOTE:

If there are video noise lines on the screen, reposition or reduce them. Refer to “NOISE CANCEL”.

PICTURE CONTROLS

TRACKING ADJUSTMENT

Tracking adjustment will be set automatically (Digital Tracking function) when you start playback.

However when playing pre-recordedtapes or tapes recorded on units other than your own, noise lines (black and white streaks) may appear on the playback picture. If this occurs, you can adjust the tracking control manually by pressing the CHANNELK orL button until the streaks disappear. To return to the DTR function, stop the tape once and start playback again.

RENTAL PLAYBACK

This function enables you to improve the picture quality when playing back worn cassettes such as rented tapes.

1 Select “USER’S SET UP”

Press the MENU button on the

– M E N U –

 

TIMER PROGRAMMING

remote control.

PICTURE CONTROL

 

CHANNEL SET UP

 

 

SETTING CLOCK

 

Press the PLAY/K or STOP/L but-

B USER’S SET UP

 

LANGUAGE [ENGLISH]

 

V-CHIPSET UP

 

ton to point to “USER’S SET UP”.

CAPTION [OFF]

 

TIME SEARCH

 

 

ZERO RETURN

 

Then press the F.FWD/B button.

 

 

 

 

 

2 Set “RENTAL” to [ON]

– USER’S SET UP –

Press the PLAY/K or STOP/L but-

B RENTAL

[ON]

ton to point to “RENTAL”.

REPEAT PLAY

[OFF]

AUTO RETURN

[OFF]

Press the F.FWD/B or REW/s button until [ON] appears.

3 Exit the Rental setting

Press the MENU button on the remote return to the TV mode.

4 Start playback

Press the PLAY button to start playback PLAY B” appears.

Once you select the Rental mode, even after you turn off the TV/VCR

TO CANCEL THE RENTAL

Repeat steps [1] and [2], select [OFF] F.FWD/B or REW/s button on the Press the MENU button on the remote return to TV mode.

If there is a power failure of any

will retain its memory for this feature

RECORDING

TWO DIFFERENT TAPE SPEEDS

Before recording, select the tape speed from : SP mode (Standard Play) orSLP mode (Super Long Play).

The table below shows the maximum recording/playback time using T60, T120 or T160 tapes in each mode.

Tape Speed

Recording/Playback Time

 

 

 

 

 

 

Type of tape

T60

T120

T160

 

 

 

 

 

SP mode

1 hour

2 hours

2-2/3hours

 

 

 

 

 

SLP mode

3 hours

6 hours

8 hours

 

 

 

 

 

Note: You can playback a tape recorded in LP mode (Long Play).

ERASE PREVENTION

You can prevent accidental erasing of recording by breaking off the tab on the back edge of the cassette.

Tab

If you decide to record on the tape again, cover the hole with plastic tape.

Plastic Tape

- 19 -

EN

9I03

Make sure ...

TV/VCR power must be turned on.

Insert a cassette tape with its erase prevention tab in place. (If necessary, rewind or fast forward the tape to the point at which you want to begin recording.)

NOTE: This unit willONLY record and view the same channel.

NORMAL RECORDING

 

OTR (One Touch Recording)

 

 

 

You can ONLY watch the same TV program that is being recorded.

1 Select the channel to be recorded

 

Press the number buttons on the

CH 10

remote control or the CHANNEL K orL button.

Remember: If the TV/VCR is connected to a cable box or satellite box, the TV/VCR must be on CH3

or CH4, then the channel to be recorded selected on the cable box or satellite

2 Select the tape speed

Press the SPEED button to select the desired tape speed (SP/ SLP).

SP

3 Begin recording

REC

Press the RECORD button.

SP

4 Stop recording

Press the STOP button when recording

SKIPPING UNWANTED SCENES DURING

Press the PAUSE/STILL button to

PAUSE

temporarily stop recording.

 

Press the PAUSE/STILL or

 

RECORD button to resume record-

 

ing.

SP

NOTES:

After five minutes, the TV/VCR will automatically switch to the Recording mode to prevent tape damage.

If “CLOSED CAPTION (ON)” is selected, the OnScreen Display will appear for 5 seconds, then disappear.

This function enables you to set a recording length simply by pressing the REC/OTR button on the TV/VCR.

Make sure ...

TV/VCR power must be turned on.

Insert a cassette tape with its erase prevention tab in place. (If necessary, rewind or fast forward the tape to the point at which you want to begin recording.)

NOTES:

You cannot start OTR with the remote control.

Recording starts immediately when the REC/OTR button is pressed.

When the REC/OTR button is pressed 18 times, the TV/VCR returns to the Normal Recording mode.

To stop the OTR operation, press the STOP button on the TV/VCR or on the remote control.

To show the remaining time, press the DISPLAY button on the remote control so that “OTR” appears on the TV screen. (It will show up momentarily then disappear.)

Recording stops when 0:00 is reached.

Please note that in the SLP mode maximum recording time, assuming the tape is started at the beginning, is 8 hours using T-160(or 6 hours usingT-120).

If the tape runs out before the end time, the TV/VCR will switch to the Stop mode immediately, ejects the tape and turns itself off.

If you press the power button during OTR, the TV/VCR continues recording until the selected length is reached.

1 Select the channel to be recorded

Press the number buttons on the remote control or the CHANNEL K orL button.

Remember: If the TV/VCR is connected to a cable box or satellite box, the TV/VCR must be on CH3 or CH4, then the channel to be recorded is selected on the cable box or satellite box.

2 Select the tape speed

Press the SPEED button to select the desired tape speed (SP/ SLP).

- 20 -

EN

9I03

3 Begin OTR

OTR(2 : 30)

Press the REC/OTR button on the TV/VCR as many times as needed The recording length will be deter

mined by the number of times you

SP

press the REC/OTR button. Each additional push will increase the 30 minutes. It is set up to 8 hours.

Push(es)

Display

 

Recording length

1 push

 

(normal recording)

2 pushes

0:30

 

30 minutes

3 pushes

1:00

 

60 minutes

 

 

 

 

17 pushes

8:00

 

480 minutes

 

 

 

 

 

 

 

 

 

 

 

 

You may ing while record on year period.

In the example below, the timer is being set to record:

DATE:

July 4th, 2004

SETTING TIME: from 7:30PM to 8:50PM CHANNEL: CH61

TAPE SPEED: SP

Make sure ...

If a cable box or satellite box is connected with the TV/VCR you will be limited to record only one channel, and the channel selector on the TV/VCR must be selected to the output channel of the boxes CH 3 or CH 4 and then the actual channel to be recorded must be selected on the boxes.

Clock must be set to the correct time and date before setting the timer.

TV/VCR power must be turn on to program it.

Insert a cassette tape with its erase prevention tab in place. (If necessary, rewind or fast forward the tape to the point at which you want to begin recording.)

The channel you want to record is properly set in advance.

Avoid overlap of programs ...

There is a chance that a program will not be recorded when programs overlap;

The program with an earlier start has priority.

Once the earliest program finishes, the overlapping programs will begin recording in sequence.

The illustration below demonstrates the sequence of recordings.

Recording Sequence

Program 1 10:00AM-11:00AMProgram 29:00AM-10:00AMProgram 39:30AM-12:00PM

9:00AM

10:00AM

11:00AM

12:00PM

*Recording period is SHADED

1 Select “TIMER PROGRAMMING”

Press the MENU button on the

– M E N U –

B TIMER PROGRAMMING

PICTURE CONTROL

SETTING CLOCK

CHANNEL SET UP

USER’S SET UP

V-CHIPSET UP

LANGUAGE [ENGLISH]

CAPTION [OFF]

ZERO RETURN

TIME SEARCH

If you have not yet set the clock, CLOCK SET” appears. If so,

[8] on page 11. Then set the timer

2 Select your desired program

Press the PLAY/K or STOP/L but-

– TIMER PROGRAMMING –

ton to select the desired program

CH DATE

BEGIN END

- -

-/

:

-:

position.

- -

-/-- - - -

-:--

-:-- - -

 

- -

-/-- - - -

-:--

-:-- - -

Then press the F.FWD/B button.

B - -

-/-- - - -

-:--

-:-- - -

- -

-/-- - - -

-:--

-:-- - -

 

- -

-/-- - - -

-:--

-:-- - -

 

- -

-/-- - - -

-:--

-:-- - -

3 Set the channel number

Press the PLAY/K or STOP/L button until the desired channel number appears.

(Example: CH61)

Then press the F.FWD/B button. Remember: If the TV/VCR is box or satellite box, the TV/VCR CH4, then the channel to be

the cable box or satellite box.

– TIMER PROGRAMMING –

CH

DATE

BEGIN

END

- -

-/-- - - -

-:--

-:-- - -

- -

-/-- - - -

-:--

-:-- - -

- -

-/-- - - -

-:--

-:-- - -

B 61

-/-- - - -

-:--

-:-- - -

- -

-/-- - - -

-:--

-:-- - -

- -

-/-- - - -

-:--

-:-- - -

- -

-/-- - - -

-:--

-:-- - -

4 Select once, every day or weekly

For once recording :

– TIMER PROGRAMMING –

Press the PLAY/K (up) button

CH DATE

BEGIN END

until the desired date appears.

- -

-/-- - - -

-:--

-:-- - -

- -

-/-- - - -

-:--

-:-- - -

 

- -

-/-- - - -

-:--

-:-- - -

(Example: “7/04” for July 4th).

B 61

7/04 SUN -:--

-:-- - -

- -

-/-- - - -

-:--

-:-- - -

Then press the F.FWD/B button.

- -

-/-- - - -

-:--

-:-- - -

- -

-/-- - - -

-:--

-:-- - -

 

- -

-/-- - - -

-:--

-:-- - -

- 21 -

EN

9I03

For every day recording : To record a TV program at the same time on the same channel every day. (Example: Monday through Sunday)

Press the STOP/L (down) button

– TIMER PROGRAMMING –

until “EVRY DAY” appears.

CH DATE

BEGIN END

- -

-/--

- - -

-:--

-:--

- -

Then press the F.FWD/B button.

- -

-/--

- - -

-:--

-:--

- -

- -

-/--

- - -

-:--

-:--

- -

 

B 61 EVRY DAY -:--

-:--

- -

 

- - -/--

- - - -:--

-:--

- -

 

- -

-/--

- - -

-:--

-:--

- -

 

- -

-/--

- - -

-:--

-:--

- -

 

- -

-/--

- - -

-:--

-:--

- -

For weekly recording : To record a

 

 

 

 

 

 

the same time on the same channel

 

 

 

 

 

 

(Example: every Monday)

 

 

 

 

 

 

Press the STOP/L

 

 

 

 

 

 

until “EVRY” and

 

 

 

 

 

 

day of the week appear

 

 

 

 

 

 

Then press the F.FWD/

 

 

 

 

 

 

 

 

 

 

 

 

 

5 Set beginning hour

 

 

 

 

 

 

 

 

 

 

 

 

Press the PLAY/K or STOP/L but-

 

 

 

 

 

 

ton until the desired hour appears.

B 61

7/04

SUN

7:12PM -:

 

(Example: “7, PM” for 7:30PM)

- -

- -

-/--

- - -

-:--

-:--

- -

 

- -

-/--

- - -

-:--

-:--

- -

Then press the F.FWD/B button.

- -

-/--

- - -

-:--

-:--

- -

 

 

 

 

 

 

 

 

 

 

 

 

 

6 Set beginning minute

– TIMER PROGRAMMING –

Press the PLAY/K or STOP/L but-

CH DATE

BEGIN END

- -

-/

 

:

-:

 

ton until the desired minute appears.

- - -

- -

- -

-/--

- - -

-:--

-:--

- -

 

- -

-/--

- - -

-:--

-:--

- -

(Example: “30” for 7:30PM)

B 61

7/04

SUN

7:30PM -:--

- -

- -

-/--

- - -

-:--

-:--

- -

 

- -

-/--

- - -

-:--

-:--

- -

Then press the F.FWD/B button.

- -

-/--

- - -

-:--

-:--

- -

 

 

 

 

 

 

 

 

 

 

 

 

 

7 Set end hour

– TIMER PROGRAMMING –

Press the PLAY/K or STOP/L but-

CH DATE

BEGIN END

- -

-/--

- - -

-:--

-:--

- -

ton until the desired hour appears.

- -

-/--

SUN- - -

-:--

-:--

- -

B 61

7/04

7:30PM 8:30PM

(Example: “8, PM” for 8:50PM)

- -

-/--

- - -

-:--

-:--

- -

- -

-/--

- - -

-:--

-:--

- -

 

- -

-/--

- - -

-:--

-:--

- -

Then press the F.FWD/B button.

- -

-/--

- - -

-:--

-:--

- -

 

 

 

 

 

 

 

 

 

 

 

 

 

8 Set end minute

– TIMER PROGRAMMING –

Press the PLAY/K or STOP/L but-

CH DATE

BEGIN END

- -

-/--

- - -

-:--

-:--

- -

ton until the desired minute appears.

- -

-/--

- - -

-:--

-:--

- -

- -

-/--

SUN- - -

-:--P

-:--

P - -

(Example: “50” for 8:50PM)

B 61

7/04

7:30 M 8:50

M

- -

-/--

- - -

-:--

-:--

- -

 

- -

-/--

- - -

-:--

-:--

- -

Then press the F.FWD/B button.

- -

-/--

- - -

-:--

-:--

- -

 

 

 

 

 

 

 

 

 

 

 

 

 

9 Set the tape speed

– TIMER PROGRAMMING –

Press the PLAY/K or STOP/L but-

CH

DATE

 

BEGIN END

 

- -

-/--

- - -

-:--

-:--

- -

ton until the desired tape speed

- -

-/--

- - -

-:--

-:--

- -

B 61

7/04 SUN

7:30PM 8:50PMSP

appears. (Example: SP)

- -

-/--

- - -

-:--

-:--

- -

- -

-/--

- - -

-:--

-:--

- -

 

- -

-/--

- - -

-:--

-:--

- -

 

- -

-/--

- - -

-:--

-:--

- -

 

- -

-/--

- - -

-:--

-:--

- -

10 Finish setting the program

Press the F.FWD/B or REW/s button. The program

11 Set the timer

Press the POWER button to set automatic timer recording. The RECORD indicator lights up.

You must turn off the TV/VCR to activate automatic timer recording.

If power is not turned off and you continue watching TV, “TIMER REC STANDBY” starts flashing on the TV screen 2 minutes before the programmed start time.

TIMER PROGRAM EXTENSION

To shift the time schedule of an automatic timer recording.

1)Press the POWER button.

2)Repeat step [1] on page 21.

3)Press the RECORD button and select the desired program using the PLAY/K or STOP/L button.

4)Press the RECORD button again.

Each additional push will shift forward the begin/end time for recording by 10 minutes. When the recording is already in progress, each additional push will shift forward the end time only. If you want to cancel while setting, press the PAUSE/STILL button on the remote control. The recording time returns to the original time.

NOTE: When you shift forward the time schedule during recording, the recording speed will automatically be set to the SLP mode.

5)Press the F.FWD/B or REW/s button to exit the setting menu. Then press the MENU button on the remote control to return to original mode.

TO CORRECT A PROGRAM

While setting a program; press the REW/s button to go back one step and enter the correct numbers using the PLAY/K or STOP/L button.

After setting a program;

1)Press the POWER button.

2)Repeat steps [1] - [2] on page 21.

3)Press the F.FWD/B button (or press the REW/s button to go back one step) until the part you want to correct begins flashing, then make the changes pressing the PLAY/K or STOP/L button.

4)Press the POWER button to set automatic timer recording.

- 22 -

EN

9I03

TO CANCEL AN AUTOMATIC TIMER RECORDING

After setting a program;

1)Press the POWER button.

2)Repeat steps [1] - [2] on page 21 and select a program you want to cancel.

3)Press the T-PROG.CLEAR button.

4)Press the MENU button on the remote control to return to TV mode.

While recording is in progress;

1)Press POWER button.

2)Press the STOP/EJECT button on the TV/VCR.

2 Set “AUTO RETURN” to [ON]

– USER’S SET UP –

Press the PLAY/K or STOP/L but-

RENTAL

[OFF]

ton to point to “AUTO RETURN”.

REPEAT PLAY

[OFF]

B AUTO RETURN

[ON]

Press the F.FWD/B or REW/s button until [ON] appears.

3 Auto Return will begin

When all the timer recordings are TV/VCR will rewind to the beginning program(s).

NOTE:

If you press the POWER button rewinding, the Auto Return will

TO CHECK THE BEGIN/END TIME

1)Press the POWER button so that the Recording indicator goes off.

2)Press the MENU button on the remote control.

3)Confirm “TIMER PROGRAMMING” is pointed.

4)Press the F.FWD/B button. The details of programs appear on the TV screen.

5)Press the MENU button on the remote control to return to TV mode.

HINTS FOR AUTOMATIC TIMER RECORDING

4 Watch the recorded program

Press the PLAY/K button.

TO CANCEL THE AUTO MODE

Repeat steps [1] and [2], select [OFF] F.FWD/B or REW/s button.

If there is a power failure of any

will retain its memory for this feature

Make sure the channel you want to record is properly set in advance.

It is not necessary to press the RECORD button for timer recording.

Recording begins automatically at the Start time.

If you are recording using a Timer mode, you may not operate the unit manually.

The erase-preventiontab on the cassette must be in place (or you must put tape over the hole).

If the erase-preventiontab is removed, the cassette will be ejected when the POWER button is pressed to off.

If the tape runs out before the end time, the TV/VCR will switch to the Stop mode immediately and the tape will be ejected.

AUTO RETURN

With this feature, after timer recording is finished, the beginning of the recorded program(s) can be searched for automatically.

1 Select “USER’S SET UP”

– M E N U –

 

WAKE UP TIMER

The Wake Up Timer function turns on the TV/VCR without using the POWER button after a desired period of time.

NOTES:

Use the remote control for this procedure.

Clock must be set to the correct time before setting the timer.

If you want to select [TAPE], you must insert a cassette tape in the TV/VCR. The tape will start playback automatically on your desired time.

1 Select“WAKE-UPTIMER”

Press the WAKE UP/SLEEP button on the remote control once, and confirm “ON/OFF” is pointed.

Press the F.FWD/B or REW/s

WAKE UP B ON/OFF

[ON]

TIMER TV/TAPE

[TV]

button until [ON] appears.

TIME

[12:00AM]

 

 

 

 

 

2 Select “TV” or “TAPE”

 

 

Press the PLAY/K or STOP/L but-

 

 

ton until to point to “TV/TAPE”.

 

 

Press the MENU button on the remote control.

Press the PLAY/K or STOP/L but ton to point to “USER’S SET UP” Then press the F.FWD/B button.

TIMER PROGRAMMING

PICTURE CONTROL SETTING CLOCK CHANNEL SET UP

BUSER’S SET UP

V-CHIPSET UP

LANGUAGE [ENGLISH] CAPTION [OFF]

ZERO RETURN TIME SEARCH

Press the F.FWD/B or REW/s button and select [TV] or [TAPE].

- 23 -

WAKE UP

ON/OFF

[ON]

TIMER

B TV/TAPE

[TV]

 

TIME

[12:00AM]

EN

9I03

3 Set wake up time

 

 

 

Press the PLAY/K or STOP/L but-

 

 

 

ton until to point to “TIME”.

 

 

 

Press the F.FWD/B or REW/s

 

 

 

button until your desired wake up WAKE UP

ON/OFF

[ON]

time appears.

TIMER

TV/TAPE

[TV]

 

B TIME

[12:00AM]

Each additional push will increase (or time by 10 minutes.

4 Exit the Wake Up Timer setting

Press the MENU button on the remote control to return to TV mode.

1 Select “SLEEP TIMER”

F. your

Each

SLEEP TIMER [2:00]

 

the time by 30 minutes up to 120

 

Press the MENU button on the

 

the Sleep Timer setting.

 

TO CANCEL THE WAKE UP TIMER

Repeat step [1] but select [OFF].

SLEEP TIMER

The Sleep Timer function turns off the TV/VCR without using the POWER button after a desired period of time.

NOTE:

This function does not operate during Recording mode.

TO CANCEL THE SLEEP

Press the WAKE UP/SLEEP button control until “SLEEP TIMER”

To view the time left for sleep timer UP/SLEEP button twice, then press ton on the remote control to exit the ting.

COPYING A VIDEO TAPE

You can make copies of video tapes made by friends or relatives for your enjoyment.

WARNING: Unauthorized recordings of copyrighted video tapes may be an infringement of copyright laws.

Connect your TV/VCR and a Source (Playing) VCR using the following diagram.

VIDEO

AUDIO

 

 

[The TV/VCR]

 

[Ex: Source (playing)

 

VCR or camcorder]

Audio/Video

AUDIO

 

OUT

IN

adapter cable

 

 

(not supplied)

VIDEO

 

 

 

1)Insert a pre-recordedvideo cassette into the source (Playing) VCR or camcorder.

2)Insert a blank video cassette or one you want to record over, into the TV/VCR’s cassette compartment.

3)Press the SPEED button on remote control for the TV/VCR to select the desired recording speed (SP/SLP).

4)Press the CHANNEL K orL button on the TV/VCR until “AUX” appears on the screen.

NOTE: “AUX” is found below the lowest memorized channel. (Example: CH2)

5)Press the REC/OTR button on the TV/VCR.

6)Begin playback of the tape in the source (Playing) VCR or camcorder.

NOTE: For best results during dubbing, use the TV/VCR’s front panel controls whenever possible. The remote control might affect the source (Playing) VCR’s playback operation.

7)To stop copying, press the STOP/EJECT button on the TV/VCR, then stop the tape on the source VCR or camcorder.

- 24 -

EN

9I03

ON SCREEN DISPLAY

To check the Counter, Clock, and Channel number on the TV screen, press the DISPLAY button on the remote control. Each time you press the DISPLAY button on the remote control, the TV screen will change as follows:

WHEN THE CLOSED CAPTION MODE IS OFF:

<Off mode>

 

 

<Counter mode>

 

<Clock mode>

Counter mode: After 5 seconds, only

 

 

 

 

 

 

 

CH2

the counter remains. To clear it, press

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

5:40PM

the DISPLAY button.

 

 

 

 

 

 

 

 

 

 

Press

 

 

 

 

Press

Clock mode: After 5 seconds, only

 

 

 

 

once

 

 

 

 

once

the clock and the channel number

 

 

COUNT 0:12:34

 

 

 

remain. To clear them, press the DIS-

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PLAY button.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Press once

 

 

 

 

 

 

 

 

 

 

 

 

WHEN THE CLOSED CAPTION MODE IS ON:

 

OFF mode

Clock/Counter mode

The On Screen Display disappear after 5 seconds.

 

 

 

 

 

 

 

PM

This is true even if the MUTE button is pressed or the

 

 

 

 

 

 

 

 

PAUSE/STILL button is pressed while recording.

 

 

 

 

 

 

 

 

SPECIAL FEATURES

REAL TIME TAPE COUNTER

This shows the elapsed recording or playback time in hours, minutes and seconds. (The displayed time will not change on a blank tape or blank portions on the tape.)The “–”indication will appear when the tape has rewound further than “0:00:00” on the tape counter.

AUTO REWIND

When the end of a tape is

-

ing, playback or fast-forward,

-

matically rewind to the beginning

 

finishes, the TV/VCR will

 

itself to off.

 

This function is operative

set

to the [OFF] position.

 

The tape will notauto-rewind

-

ing or One Touch Recording.

 

MAINTENANCE

CABINET CLEANING

Wipe the front panel and other exterior surfaces of the TV/VCR with a soft cloth immersed in lukewarm water and wrung dry.

Never use a solvent or alcohol. Do not spray insecticide liquid near the TV/VCR. Such chemicals may cause damage and discoloration to the exposed surfaces.

AUTO HEAD CLEANING

Automatically cleans video heads as you insert or remove a cassette, so you can see a clear picture.

Playback picture may become blurred or interrupted while the TV program reception is clear. Dirt accumulated on the video heads after long periods of use or the usage of rental or worn tapes can cause this problem.

If a streaky or snowy picture appears during play-

back, the video heads in your TV/VCR may need to be cleaned.

1.Please visit your local Audio/Video store and purchase a good quality VHS Video Head Cleaner.

2.If a Video Head Cleaner does not solve the problem, please call our help line at 1-800-827-0036,to locate an Authorized Service Center.

NOTES:

Remember to read the instructions included with the video head cleaner before use.

Clean video heads only when problems occur.

SERVICING

Should your TV/VCR become inoperative, do not try to correct the problem by yourself. There are no user-serviceableparts inside. Turn off, unplug the power cord and please call our help line at1-800-827-0036,to locate an Authorized Service Center.

- 25 -

EN

9I03

TROUBLESHOOTING GUIDE

If you have followed the instructions contained in this manual, and have difficulty operating your TV/VCR, locate the PROBLEM in the left column below. Check the corresponding CORRECTIVE ACTION column to remedy the problem.

PROBLEM

CORRECTIVE ACTION

 

No power.

Make sure the AC cord is connected to an AC outlet.

 

 

Make sure the power is turned on.

 

No picture and sound.

Make sure the AC cord is connected to an AC outlet.

 

 

Check antenna connection.

 

 

Let the TV/VCR program its tuner memory.

 

No picture or poor picture on

Adjust direction or replace antenna.

 

TV/VCR.

Adjust picture controls.

 

No sound or poor sound.

Adjust volume control on remote control or main unit.

 

 

Press the MUTE button to restore sound.

 

Timer recording is not possible.

Make sure the timer recording is set correctly.

 

 

Make sure the power is off.

 

 

Make sure the TV/VCR clock is set correctly.

 

Cannot go into Record mode.

Make sure the tape has anerase-preventiontab. If needed, cover the

 

hole with plastic tape.

 

Playback picture is partially noisy.

Adjust tracking control for a better picture using the CHANNELK

 

orL button on the TV/VCR.

 

No picture but the audio is OK in

Head cleaning may be necessary. Refer to “AUTO HEAD

 

playback.

CLEANING” on page 25.

 

No operation by infrared Remote

Make sure the AC cord is connected to an AC outlet.

 

Control.

Check batteries in remote control.

 

Video or color fades in and out

You can not copy a copyrighted video tape. You are experiencing

 

when making a copy of a video tape.

copy guard protection.

 

Different color marks on screen.

Magnetism from nearby appliances and geomagnetism might affect

 

the color of the TV picture. Move the TV/VCR away from the appli-

 

ances, the TV/VCR can repair itself automatically. If you want to

 

 

repair immediately, unplug the TV/VCR power cord, then plug it in

 

again 30 minutes or so later.

 

 

 

 

 

 

 

CLOSED CAPTION PROBLEM

POSSIBLE REMEDY

 

My TV/VCR is showing captions

• You are watching a live broadcast and spelling errors made by the

 

that are misspelled.

closed captioning production company may pass through uncorrected.

 

A prerecorded program will not show any misspelled words because

 

of the normal time available for editing the captions.

 

 

 

My TV/VCR will not show the text

• Captions that are delayed a few seconds behind the actual dialogue

in its entirety or there is a delay of

are common for live broadcast. Most captioning production companies

what is being said.

can display a dialogue to a maximum of 220 words per minute. If a

 

dialogue exceeds that rate, selective editing is used to insure that the

 

captions remainup-to-datewith the current TV screen dialogue.

 

 

 

 

My captions are scrambled with

• Interference caused by building, power lines, thunderstorms, etc.

 

white boxes on the TV screen.

may cause scrambled or incomplete captions to appear.

 

My program guide listed a TV show

• Broadcasters may at times use a time compression process to speed

as being closed captioned but none

up the actual program so that additional advertising time can be

 

of the captions were displayed.

given. Since the decoder cannot read the compressed information,

 

 

captions will be lost.

 

 

 

 

My prerecorded video tape does not

• The video tape was either an illegal copy or the tape duplicating

 

show any captions. The tape box

company accidentally left out the captioning signals during the

 

mentions it being closed captioned.

copying process.

 

 

 

 

My TV screen shows a black box

• You are in the TEXT mode. Select CAPTION mode to CAPTION

 

on certain channels.

[OFF].

 

 

 

 

 

- 26 -

EN

9I03

CABLE CHANNEL DESIGNATIONS
If you subscribe to cable TV, the channels are displayed as 1-125. Cable companies often designate channels with letters or letter-number combinations. Please check with your local cable company. The following is a chart of common cable channel designations.
GENERAL SPECIFICATIONS

SPECIFICATIONS

ELECTRICAL SPECIFICATIONS

CRT :

13 inch in-linegun, 90˚

Video input level :

0.5~2.0Vp-p

 

deflection tube

Audio input level :

-15dBs

Television system :

NTSC-M

Video S/N ratio :

More than 46dB

Closed caption system :§15.119/FCC

Audio S/N ratio :

More than 43dB

Video Heads :

Rotary two-head

OTHER SPECIFICATIONS

Tape width :

1/2 inch

Tape speed

 

Power requirement :

AC 120V/60Hz

SP :

33.40mm/sec.

Power consumption :

60W

LP :

16.67mm/sec.

Dimensions :

H:15-5/16”(389mm)

SLP :

11.12mm/sec.

 

W:14-7/16”(367mm)

Tuner channel

 

 

 

 

D:14-7/8”(377mm)

TV VHF Low :

#2~#6

 

Weight :

23.1bs (10.5kg)

TV VHF High :

#7~#13

 

 

TV UHF :

#14~#69

Designs and specifications are subject to change

CATV

 

 

without notice.

 

VHF :

5A

 

If there is a discrepancy between languages, the

MID band :

A5~A1, A~I

default language will be English.

SUPER band :

J~W

 

 

HYPER band :

W+1~W+84

 

 

Terminals

 

 

 

Antenna input :

VHF/UHF 75 ohms

 

 

 

unbalanced

 

 

Video input :

RCA connector [ 1

 

 

Audio input :

RCA connector [ 1

 

 

Earphone :

1/8” monaural (3.5 mm)

 

 

 

 

 

 

CATV channel

5A

2

3

4

5

6

7

8

9

10

11

12

13

A

B

 

TV Display

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CATV channel

C

D

E

F

G

H

I

J

K

L

M

N

O

P

Q

 

TV Display

16

17

18

19

20

21

22

23

24

25

26

27

28

29

30

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CATV channel

R

S

T

U

V

W

W+1

W+2

W+3

W+4

W+5

W+6

W+7

W+8

W+9

 

TV Display

31

32

33

34

35

36

37

38

39

40

41

42

43

44

45

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CATV channel

W+10

W+11

W+12

W+13

W+14

W+15

W+16

W+17

W+18

W+19

W+20

W+21

W+22

W+23

W+24

 

TV Display

46

47

48

49

50

51

52

53

54

55

56

57

58

59

60

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CATV channel

W+25

W+26

W+27

W+28

W+29

W+30

W+31

W+32

W+33

W+34

W+35

W+36

W+37

W+38

W+39

 

TV Display

61

62

63

64

65

66

67

68

69

70

71

72

73

74

75

 

CATV channel

W+40

W+41

W+42

W+43

W+44

W+45

W+46

W+47

W+48

W+49

W+50

W+51

W+52

W+53

W+54

 

TV Display

76

77

78

79

80

81

82

83

84

85

86

87

88

89

90

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CATV channel

W+55

W+56

W+57

W+58

A-5

A-4

A-3

A-2

A-1

W+59

W+60

W+61

W+62

W+63

W+64

 

TV Display

91

92

93

94

95

96

97

98

99

100

101

102

103

104

105

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CATV channel

W+65

W+66

W+67

W+68

W+69

W+70

W+71

W+72

W+73

W+74

W+75

W+76

W+77

W+78

W+79

 

TV Display

106

107

108

109

110

111

112

113

114

115

116

117

118

119

120

 

CATV channel

W+80

W+81

W+82

W+83

W+84

 

 

 

 

 

 

 

 

 

 

 

TV Display

121

122

123

124

125

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

- 27 -

 

 

 

 

 

 

 

EN

9I03

CONTROLES DE OPERACIÓN Y SUS FUNCIONES

NOTA:

No recomendamos utilizar mandos a distancia universales. No todas las funciones pueden ser controladas mediante un mando a distancia universal. Si decide utilizar un mando a distancia universal con esta unidad, tenga en cuenta que con el número de código dado tal vez no se pueda controlar la unidad. En este caso, póngase en contacto con el fabricante del mando a distancia universal.

VIDEO

AUDIO

POWER

VOLUME

CHANNEL

STOP/EJECT REW

PLAY F.FWD REC/OTR

EARPHONE

3

15

1

2

3

4

5

6

7

8

9 10 11 12

13

14

 

 

WAKE-UP

POWER

 

/SLEEP EJECT

 

 

CHANNEL

 

 

RETURN

1

2

3

4

5

6

 

 

CHANNEL

7

8

9

25

7

24

5

4Botones de volumen (VOLUME X /Y)–

Ajustan el nivel del volumen.

5Botones de canales (CHANNEL K/L)–

Púlselos para seleccionar los canales deseados para ver o grabar.

Se puede mostrar el menú principal en la pantalla del televisor pulsando repetidamente este botón del televisor/videograbadora.

Función de seguimiento– Pulse los botones para minimizar el ruido de vídeo (líneas o puntos en la pantalla) durante la reproducción.

16

17

8

0

+100

MENU DISPLAY

MUTE VOLUME

PLAY

REW

F.FWD

4

23

9

10

6Ventanilla sensora del mando a distancia– Recibe las señales infrarrojas procedentes del mando a distancia.

7Botón de expulsión (EJECT)–Púlselo en el modo de parada para expulsar la cinta del televisor/videograbadora.

7

STOP

 

 

 

 

RECORD

 

SPEED

PAUSE/STILL

11

T-PROG.

 

22

18

GAME

TIME SEARCH

CLEAR

19

COUNTER

 

21

 

 

RESET

 

 

20

 

 

 

1Toma de entrada de vídeo (VIDEO)–

Conéctela a la toma de salida de vídeo de su videocámara u otra videograbadora.

2Toma de entrada de audio (AUDIO)–

Conéctela a la toma de salida de audio de su equipo de audio, videocámara u otra videograbadora.

3Botón de la alimentación (POWER)–

Púlselo para encender y apagar el televisor/videograbadora. Púlselo para activar la grabación con temporizador.

Botón de parada (STOP)– Púlselo para detener la cinta.

Botón L

Púlselo para seleccionar los modos de ajuste desde el menú de la pantalla.

Púlselo para introducir dígitos cuando establezca un programa.

(Por ejemplo: Para ajustar el reloj o establecer un programa de temporizador)

8Botón de rebobinado (REW)– Púlselo para rebobinar la cinta, o para ver la imagen en retroceso rápido durante el modo de reproducción.

(Búsqueda con rebobinado)

Botón s

Púlselo para seleccionar un modo desde un menúparticular.

(Por ejemplo: IDIOMA o ADJUST DE USER)

9Botón de reproducción (PLAY)– Púlselo para iniciar la reproducción.

Botón K

Púlselo para seleccionar los modos de ajuste desde el menú de la pantalla.

- 28 -

ES

0I29

ANT.

Púlselo para introducir dígitos cuando establezca un programa.

(Por ejemplo: Para ajustar el reloj o establecer un programa de temporizador)

10Botón de avance rápido (F.FWD)– Púlselo para avanzar rápidamente la cinta, o para ver la imagen en avance rápido durante el modo de reproducción. (Búsqueda con avance rápido)

Botón B

Cuando establezca un programa (por ejemplo: para ajustar el reloj o para establecer un programa de temporizador), púlselo para determinar su elección y vaya al paso siguiente que quiera introducir.

Púlselo para determinar los modos de ajuste desde el menú de la pantalla.

Púlselo para seleccionar un modo desde un menúparticular.

(Por ejemplo: IDIOMA o ADJUST DE USER)

11Botón de grabación (REC)– Púlselo para iniciar la grabación manual.

Botón de grabación de un toque (OTR)–

Activa la grabación de un toque. (Sólo en el televisor/videograbadora)

12Indicador de grabación (RECORD)–

Parpadea durante la grabación.

Se enciende en el modo de espera de la grabación con temporizador.

13Toma de auriculares (EARPHONE)– Para conectar los auriculares (no suministrados) y escuchar en privado. La toma es mono y tiene un tamaño de 1/8”(3.5 mm).

14Compartimiento del videocasete

15Botones numerados– Púlselos para seleccionar los canales deseados para ver o grabar. Para seleccionar canales del 1 al 9, pulse primero el botón 0 y luego el botón 1 a 9.

Botón +100– Cuando seleccione canales de televisión por cable cuyo número sea superior al 99, pulse primero este botón, y luego pulse los dos últimos dígitos. (Para seleccionar el canal 125, pulse primero el botón “+100” y luego el “2” y el “5”.)

26 27

16Botón de menú (MENU)– Púlselo para visualizar el menú principal en la pantalla del televisor.

17Botón del visualizador (DISPLAY)–

Visualiza el contador o el número del canal actual y la hora actual en la pantalla del televisor.

18Botón de velocidad de cinta (SPEED)–

Púlselo para elegir la velocidad de grabación deseada: SP/SLP.

19Botón T-PROG.CLEAR–Púlselo para cancelar un programa de temporizador.

Botón de reposición del contador (COUNTER RESET)– Púlselo para reponer el contador a 0:00:00.

20Botón de juego (GAME)– Establece el modo del juego y el modo de entrada externa al mismo tiempo.

21Botón de búsqueda con tiempo (TIME SEARCH)– Púlselo para activar el modo de búsqueda con tiempo.

22Botón de pausa/imagen fija (PAUSE/STILL)– Púlselo para detener temporalmente la cinta durante la grabación o para ver una imagen fija durante la reproducción.

23Botón de silenciamiento (MUTE)– Silencia el sonido. Púlselo de nuevo para recuperar el sonido.

24Botón de retorno de canal (CHANNEL RETURN)– Púlselo para volver al canal anterior. Por ejemplo, pulsando una vez este botón, la visualización del canal cambiará de 3 (canal actual) a 10 (canal anterior), y al pulsarlo por segunda vez, el canal cambiará del 10 al 3.

25Botón del temporizador despertador/para dormir (WAKE-UP/SLEEP)–Ajusta el temporizador para despertarse/dormir.

26Cordón de alimentación– Conéctelo a la toma de CA estándar (120V/60Hz).

27Terminal de antena (ANT.)– Para conectar una antena o sistema de televisión por cable.

- 29 -

ES

0I29

CONEXIONES DE ANTENA/CABLE

 

Desde el cable coaxil o

Caja de CATV

caja de emisiones vía

satélite de 75 ohm del

o caja de emi-

sistema de Cable

siones vía satélite

 

(no incluído)

 

OUT

IN

 

Desde el sistema de Cable

 

Antena combinada de

Antena de varilla UHF/VHF

VHF/UHF

(incluído)

(no incluído)

 

Antena VHF (no incluído)

o

Antena UHF

(no incluído)

o Combinador de VHF/UHF

(no incluído)

ANT.

o

Cable coaxil

de 75 ohm (no incluído)

o

Cable bifilar plano

MODO DE ENTRADA EXTERNA

Cuando utilice una señal de entrada externa (otra videograbadora o una videocámara), conecte los cables de salida de audio/vídeo del equipo de reproducción a las tomas AUDIO IN/VIDEO IN de su televisor/videograbadora. Y luego pulse el botón CHANNEL K oL hasta que “AUX” aparezca en la pantalla.

Usted puede programar el temporizador para que explore todos los canales que puedan recibirse en su zona.

2

– M E N U –

Pulse el

TIMER PROGRAMMING

PICTURE CONTROL

a distancia

SETTING CLOCK

USER’S SET UP

 

CHANNEL SET UP

Pulse el

V-CHIPSET UP

B LANGUAGE [ENGLISH]

CAPTION [OFF]

para señalar

ZERO RETURN

TIME SEARCH

3 Seleccione “ENGLISH”,

Seleccione “ENGLISH”, “FRANÇAIS” con el botón F.FWD/ botón REW/s en el mando a

SELECCION DE IDIOMA

1Enchufe el cordón de alimentación del televisor/videograbadora

Enchufe el cordón de alimentación del televisor/videograbadora en una toma de CA estándar.

NOTA:

Si aparecen algunas cifras en la esquina

de la pantalla, pulse el botón POWER sin desenchufar el cordón de alimentación.

Asegúrese de que ...

Pulse el botón POWER para encender el televisor/videograbadora.

NOTA: Esta función afecta sólo el idioma en el menú de la pantalla y no la fuente de audio.

4 Salga del modo de idioma

Pulse el botón MENU en el mando volver al modo del televisor. NOTA: Si, por alguna razón, el

o francés, pulse el botón MENU en tancia, pulse el botón PLAY/K para “IDIOMA (ESPAÑOL)” o (FRANÇAIS)”, a continuación, F.FWD/B y pulse el botón MENU distancia.

- 30 -

ES

0I29

AJUSTE DE CANAL

Puede programar el sintonizador para buscar todos los canales que recibe en su localidad.

NOTA: El canal preparado NO es necesario cuando esté conectado a una caja de cable o caja de satélite. Sólo tiene que seleccionar con el selector de canal del televisor/videograbadora al canal de salida de la caja de cabe o caja de satélite (por ejemplo el canal CH3). Seleccione el canal a ver en la caja de cable o caja de satélite.

Asegúrese de que ...

Pulse el botón POWER para encender el televisor/videograbadora.

1 Seleccione “AJUSTE DE CANAL”

Pulse el botón MENU en el mando a distancia.

Pulse el botón PLAY/K o el botón STOP/L para señalar “AJUSTE DE CANAL”.

A continuación, pulse el botón F.FWD/B.

– M E N U –

COMO PROGRAMAR CONTROL DE IMAGEN AJUSTE RELOJ

BAJUSTE DE CANAL

AJUSTE DE USER AJUSTE DE V-CHIPIDIOMA [ESPAÑOL]` TITULO [OFF]

RETORNO A CERO

BUSQUEDA DE HORA

2 Empiece el prefijado automático

Pulse el botón PLAY/K o STOP/L para señalar “AUTOPROGRAMACION DE CA”.

A continuación, pulse el botón F.FWD/B.

El sintonizador busca y memoriza activos en su localidad.

– AJUSTE DE CANAL –

AGREGAR/BORRAR (CATV)

BAUTOPROGRAMACION DE CA.

3 Después de buscar

El sintonizador se detiene en el canal más bajo.

Cuando se activa AUTOPROGRAMACION CA, donde no hay entrada de señal aparecerá “NO HAY SEÑAL DE

talla después de terminar la búsqueda

El televisor/videograbadora puede canales de TV para que sean canales antena de cable con las condiciones En este caso, pruebe nuevamente automático en las condiciones de

AJUSTE DEL RELOJ

Cerciórese...

• La alimentación del televisor/videograbadora deberá estar conectada.

En el ejemplo de abajo, el reloj va a ajustarse así:

FECHA: 6 de mayo de 2004 HORA: 5:40 PM

1)Pulse el botón MENU en el mando a distancia. Pulse el botón PLAY/K o STOP/L para indicar “AJUSTE RELOJ”.

Luego, pulse el botón F.FWD/B.

2)Pulse el botón PLAY/K o STOP/L para indicar “AJUSTE MANUAL RELOJ”.

Luego, pulse el botón F.FWD/B.

3)Pulse el botón PLAY/K o STOP/L hasta que aparezca el mes deseado. (Ejemplo: Mayo - 05) Luego, pulse el botón F.FWD/B.

4)Pulse el botón PLAY/K o STOP/L hasta que aparezca el día del mes deseado. (Ejemplo: 6 - 06)

Luego, pulse el botón F.FWD/B.

5)Pulse el botón PLAY/K o STOP/L hasta que aparezca el año deseado. (Ejemplo: 2004) Luego, pulse el botón F.FWD/B.

6)Pulse el botón PLAY/K o STOP/L hasta que aparezca la hora deseada. (Ejemplo: 5, PM) Luego, pulse el botón F.FWD/B.

7)Pulse el botón PLAY/K o STOP/L hasta que aparezca el minuto deseado. (Ejemplo: 40)

8)Pulse el botón MENU en el mando a distancia. Aunque los segundos no se visualizan, éstos empiezan a contar desde 00 cuando se pulsa MENU en el mando a distancia. Utilice esta función para sincronizar el reloj con la hora correcta.

- 31 -

ES

LIMITED WARRANTY

FUNAI CORP. will repair this product, free of charge in the USA in the event of defect in materials or workmanship as follows:

DURATION:

PARTS: FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year from the date of original retail purchase. Two (2) years for Picture Tube. This warranty does not cover any cosmetic parts or complete assembly parts.

LABOR: FUNAI CORP. will provide the labor without charge for a period of ninety (90) days from the date of original retail purchase.

LIMITS AND EXCLUSIONS:

This warranty is extended only to the original retail purchaser. A purchase receipt or other proof of original retail purchase will be required together with the product to obtain service under this warranty.

This warranty shall not be extended to any other person or transferee.

This warranty is void and of no effect if any serial numbers on the product are altered, replaced, defaced, missing or if service was attempted by an unauthorized service center. This FUNAI Limited warranty does not apply to any product not purchased and used in the United States.

This warranty only covers failures due to defects in material or workmanship which occurs during normal use. It does not cover damage which occurs in shipment, or failures which are caused by repairs, alterations or product not supplied by FUNAI CORP., or damage which results from accident, misuse, abuse, mishandling, misapplication, alteration, faulty installation, improper maintenance, commercial use such as hotel, rental or office use of this product or damage which results from fire, flood, lightning or other acts of God.

THIS WARRANTY DOES NOT COVER PACKING MATERIALS, ANY ACCESSORIES (EXCEPT REMOTE CONTROL), ANY COSMETIC PARTS, COMPLETE ASSEMBLY PARTS, DEMO OR FLOOR MODELS.

FUNAI CORP. AND ITS REPRESENTATIVES OR AGENTS SHALL IN NO EVENT BE LIABLE FOR ANY GENERAL, INDIRECT OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR OCCASIONED BY THE USE OF OR THE INABILITY TO USE THIS PRODUCT. THIS WARRANTY IS MADE IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, AND OF ALL OTHER LIABILITIES ON THE PART OF FUNAI, ALL OTHER WARRANTIES INCLUDING THE WARRANTY OF MERCHANTABILITY, AND FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED BY FUNAI AND ITS REPRESENTATIVES IN THE UNITED STATES. ALL WARRANTY INSPECTIONS AND REPAIRS MUST BE PERFORMED BY A FUNAI AUTHORIZED SERVICE CENTER. THIS WARRANTY IS VALID WHEN THE UNIT IS CARRIED-INOR DELIVERED TO A FUNAI AUTHORIZED SERVICE FACILITY.

IMPORTANT:

THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS., YOU MAY HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE, IF, AT ANY TIME DURING THE WARRANTY PERIOD, YOU ARE UNABLE TO OBTAIN SATISFACTION WITH THE REPAIR OF THIS PRODUCT, PLEASE CONTACT FUNAI CORP. IN WRITING

SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS OR THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGE SO THE ABOVE LIMITATION OR EXCLUSIONS MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.

ATTENTION:

FUNAI CORP. RESERVES THE RIGHT TO MODIFY ANY DESIGN OF THIS PRODUCT WITHOUT PRIOR NOTICE.

To locate your nearest FUNAI Authorized Service Center or for general service procedure, please call 1- 800-827-0036or write to the following:

FUNAI CORPORATION, INC. Service Center

19900 Van Ness Avenue, Torrance, CA 90501

Tel : 1-800-827-0036

Printed in Malaysia

1EMN20052

T5510UL