FUNAI CIWL3206 User Manual

3.44 Mb
Loading...

OWNER'S MANUAL

CIWL3206

32 INCH ANALOG / DIGITAL LCD TELEVISION

HIGH-DEFINITION TELEVISION

TO RECEIVE ANALOG/DIGITAL SIGNAL

YOU MUST CONNECT ANTENNA.

IF YOU NEED ADDITIONAL ASSISTANCE WITH SET-UP OR OPERATING AFTER READING OWNER’S MANUAL, PLEASE CALL TOLL FREE 1-800-474-0045, OR VISIT OUR WEB SITE AT http://www.funai-corp.com

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT.

THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING AND MAINTENANCE INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE APPLIANCE.

The important note is located on the rear of the cabinet.

IMPORTANT SAFEGUARDS

1.READ INSTRUCTIONS-All the safety and operating instructions should be read before the appliance is operated.

2.RETAIN INSTRUCTIONS-The safety and operating instructions should be retained for future reference.

3.HEED WARNINGS-All warnings on the appliance and in the operating instructions should be adhered to.

4.FOLLOW INSTRUCTIONS-All operating and use instructions should be followed.

5.CLEANING-Unplug TV from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.

EXCEPTION: A product that is meant for uninterrupted service and, that for some specific reason, such as the possibility of the loss of an authorization code for a CATV converter, is not intended to be unplugged by the user for cleaning or any other purpose, may exclude the reference to unplugging the appliance in the cleaning description otherwise required in item 5.

6.ATTACHMENTS-Do not use attachments not recommended by the TV manufacturer as they may cause hazards.

7.WATER AND MOISTURE-Do not use this TV near water, for example, near a bath tub, wash bowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, and the like.

8.ACCESSORIES-Do not place this TV on an unstable cart, stand, tripod, bracket, or table. The TV may fall, causing serious injury to someone, and serious damage to the appliance. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the TV.

Any mounting of the appliance should follow the manufacturer’s instructions and should use a mounting accessory recommended by the manufacturer. An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn.

PORTABLE CART WARNING

S3126A

9.VENTILATION-Slots and openings in the cabi-

net and the back or bottom are provided for ventilation and to ensure reliable operation of the TV and to protect it from overheating, these openings must not be blocked or covered. The openings should never be blocked by placing the TV on a bed, sofa, rug, or other similar surface. This TV should never be placed near or over a radiator or heat register. This TV should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instructions have been adhered to.

10.POWER SOURCES-This TV should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your appliance dealer or local power company. For TVs intended to operate from battery power, or other sources, refer to the operating instructions.

11.GROUNDING OR POLARIZATION-This TV is equipped with a polarized alternating-current line plug(a plug having one blade wider than

the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.

12.POWER-CORD PROTECTION-Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance.

13.OUTDOOR ANTENNA GROUNDING-If an outside antenna or cable system is connected to the TV, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA No. 70, provides information with respect to proper grounding of the mast and supporting structure, grounding of the leadin wire to an antenna discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. (Fig. A)

FIGURE A

EXAMPLE OF ANTENNA GROUNDING AS PER

ANTENNA

NATIONAL ELECTRICAL CODE

LEAD IN

WIRE

 

GROUND

 

CLAMP

 

 

ANTENNA

 

DISCHARGE UNIT

 

(NEC SECTION 810-20)

ELECTRIC

 

SERVICE

 

EQUIPMENT

 

 

GROUNDING CONDUCTORS

 

(NEC SECTION 810-21)

 

GROUND CLAMPS

NEC - NATIONAL ELECTRICAL CODE

POWER SERVICE GROUNDING

S 2 8 9 8 A

ELECTRODE SYSTEM

(NEC ART 250, PART H)

14.LIGHTNING-For added protection for this TV receiver during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the TV due to lightning and power-line surges.

15.POWER LINES-An outside antenna system should not be located in the vicinity of overhead power lines or other electric light of power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.

16.OVERLOADING-Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock.

2

EN

17.OBJECT AND LIQUID ENTRY-Never push objects of any kind into this TV through openings as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the TV.

18.SERVICING-Do not attempt to service this TV yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

19.DAMAGE REQUIRING SERVICE-Unplug this TV from the wall outlet and refer servicing to qualified service personnel under the following conditions:

a.When the power supply cord or plug is damaged or frayed.

b.If liquid has been spilled, or objects have fallen into the TV.

c.If the TV has been exposed to rain or water.

d.If the TV does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions, as improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the TV to its normal operation.

e.If the TV has been dropped or damaged in any way.

f.When the TV exhibits a distinct change in performance, this indicates a need for service.

20.REPLACEMENT PARTS-When replacement parts are required, be sure the service technician uses replacement parts specified by the manufacturer that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, injury to persons or other hazards.

21.SAFETY CHECK-Upon completion of any service or repairs to this TV, ask the service technician to perform routine safety checks to determine that the TV is in proper operating condition.

22.HEAT-This TV product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat.

PRECAUTIONS

Place your TV in a room with adequate ventilation.

Keep your TV set away from sources of direct heat, such as heat registers or direct sunlight.

Do not place your TV on soft surfaces, such as rugs or blankets.

Leave enough room for air to circulate around the bottom, top and back of the set.

FCC WARNING: This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the owner’s manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made.

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

Note to CATV system installer:

This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground should be connected to the grounding system of the building as close to the point of cable entry as practical.

The serial number of this product may be found on the back of the TV. No others have the same serial number as yours. You should record the number and other vital information here and retain this book as a permanent record of your purchase to aid identification in case of theft.

Model No.

Date of Purchase

Serial No.

Dealer Phone No.

Dealer Purchase from

Dealer Address

IMPORTANT SAFEGUARDS / PRECAUTIONS

A NOTE ABOUT RECYCLING:

This product’s packaging materials are recyclable and can be reused. Please dispose of any materials in accordance with your local recycling regulations.

Batteries should never be thrown away or incinerated but disposed of in accordance with your local regulations concerning chemical wastes.

3

EN

SUPPLIED ACCESSORIES

• Owner’s Manual

• Remote control unit

• Batteries

(1EMN21897)

(NF009UD)

(“AA” x 2)

If you need to replace these accessories, please refer to the PART NO, with the illustrations and call our help line mentioned on the front page.

Depending on your antenna system, you may need different types of Combiners (Mixer) or Separator (Splitter). Contact your local electronics store for these items.

FEATURES

DTV/TV/CATV

This TV lets you easily switch TV(NTSC) and DTV(ATSC) with the remote control. This feature enables you to simply view from conventional analog TV to Standard Definition TV, High Definition TV. You can also connect this TV to CATV if you have a CATV box.

Program Information Display (DTV)

You can display the title, contents and other information of the current DTV program on the screen.

Autoscan

This TV can automatically scan and memorize the channels receivable in your residential area. This feature eliminates the need of a difficult setting procedure.

V-CHIP

This feature lets you set the viewing limitations to prevent your children from watching inappropriate programs.

Closed Caption Decoder

This TV contains the built-in Closed Caption Decoder that displays text across the screen. It allows you to read the dialogue of a TV program or other information in the Closed Caption-supported programs.

MTS/SAP Tuner

This feature allows you to select with the remote control your desired audio language.

Auto Shut Off Function

If there is no signal input from the antenna terminal and no operation for 15 minutes, the unit will turn itself off automatically.

On-Screen Function Display (English / Spanish / French)

This feature lets you select the language displayed in the setup screen from English, Spanish or French.

Stereo Sound Function

Full-Function Remote Control

PLL Frequency Synthesized Tuning

HDMI Input

This TV accepts 480i / 480p / 720p / 1080i video signals and 32kHz / 44.1kHz / 48kHz audio signals.

Component VIDEO Input

This TV accepts 480i / 480p / 720p / 1080i video signals.

S-VIDEO Input

AV Input

Analog Audio Output

Digital Audio Output (Coaxial)

Resume

This feature will automatically memorize settings if a power failure occurs.

4

EN

CONTENTS

 

IMPORTANT SAFEGUARDS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2

PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3

SUPPLIED ACCESSORIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4

FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4

FUNCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

6

REMOTE CONTROL, TOP AND REAR PANEL FUNCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

6

INSTALLING THE BATTERIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

7

BATTERY PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

7

PREPARATION FOR USE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

8

CONNECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 ANTENNA CABLE CONNECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 CONNECTION TO CABLE/SATELLITE BOX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 EXTERNAL CONNECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 HDMI CONNECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 COMPONENT CONNECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 S-VIDEO CONNECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 ANALOG AUDIO/VIDEO CONNECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11 AUDIO OUTPUT CONNECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

INITIAL SETTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

INITIAL SETTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

12

CHANNEL SETTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

AUTOSCAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 CHANNEL LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 MANUAL REGISTER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 ANTENNA CONFIRMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 LANGUAGE SELECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

WATCHING TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

CHANNEL SELECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

18

VOLUME ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

18

STILL MODE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

19

SWITCHING AUDIO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

19

SWITCHING EXTERNAL INPUT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

20

CHANGING THE SCREEN DISPLAY MODE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

21

SCREEN INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

22

SLEEP TIMER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

23

OPTIONAL SETTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

SETUP SCREEN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 PICTURE ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 CLOSED CAPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 DTV CLOSED CAPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 CLOSED CAPTION STYLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 V-CHIP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 HDMI AUDIO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

MISCELLANEOUS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

TROUBLESHOOTING GUIDE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 GLOSSARY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . BACK COVER

SYMBOLS USED IN THIS MANUAL

The following is the description for the symbols used in this manual.

TV

: Settings only for the analog mode

DTV

: Settings only for the digital mode

CONTENTS

If there is no symbol under the function heading, those are common settings for the analog mode and digital mode.

5

EN

FUNCTIONS

REMOTE CONTROL,TOP AND REAR PANEL FUNCTION

SLEEP button (p23)

 

 

 

 

INPUT SELECT button (p20)

To turn the power off automatically at

 

 

 

 

To select TV or external input mode (to

preset time.

POWER

 

 

INPUT

access DVD, VCR, etc.).

 

 

SLEEP SELECT

 

POWER button (p12)

 

 

 

 

AUDIO button (p19)

To turn TV on/off.

1

2

3

 

• Analog mode (TV)

 

 

Channel number buttons (p18)

 

To select audio mode.

 

 

 

 

To select channels.

4

5

6

 

• Digital mode (DTV)

SETUP button (p14)

 

 

 

AUDIO

To select audio language.

To display on-screen menu.

7

8

9

 

STILL button (p19)

 

 

 

STILL

s / B / K / L buttons (p12)

-

0

 

Pauses the image shown on the screen.

 

 

 

 

SCREEN MODE button (p21)

To move left / right / up / down through

SETUP

 

 

MODE

 

 

 

 

SCREEN

 

the items.

 

 

 

 

Selects aspect ratios available for the

ENTER button (p12)

 

 

 

 

screen.

 

 

ENTER

 

INFO button

To decide the command of setting when

 

 

 

 

 

 

 

 

the menu is displayed.

BACK

 

 

INFO

• Analog mode (TV) (p22)

BACK button (p22)

 

 

 

 

To display channel No., signal type

 

 

 

 

and TV setting.

To go back to the previous operation in menu.

 

CH RETURN

 

• Digital mode (DTV) (p22)

 

 

 

 

VOL. X/Y buttons (p18)

VOL.

 

MUTE

CH

To display channel information, signal

 

 

 

type and TV setting.

To adjust volume.

 

 

 

 

 

 

 

 

• External mode (p20)

MUTE button (p18)

 

 

 

 

 

 

 

 

To display external mode, signal type

To mute sound.

 

 

 

 

and TV setting.

 

 

 

 

CH K/L buttons (p18/p20)

CH RETURN button (p18)

 

 

 

 

 

 

 

 

To select channels and external input

To return to previously viewed channel.

 

 

 

 

 

 

 

 

mode.

 

 

 

 

 

SETUP button (p14)

To display on-screen menu.

VOLUME X/Y buttons (p18)

To adjust volume and move right(X)/left(Y) through the menu items.

 

 

 

 

CHANNEL K/L buttons (p18)

 

 

TV CONTROL

 

To select channels and move up/down through the menu

SETUP

VOLUME

CHANNEL

ENTER

items.

INPUT SELECT/ POWER

 

POWER button (p12)

To turn TV on/off.

6

EN

INPUT SELECT/ENTER button (p20/p12)

To select TV or external input mode (to access DVD, VCR, etc.).

To decide the command of setting when the menu is displayed.

Infrared Sensor Window

To receive the infrared rays transmitted from the remote control.

NOTE:

With buttons [VOL. X/Y] or [MUTE], you can only adjust the volume of the main unit. You cannot adjust the volume of the external devices with these buttons.

ANT. IN jack

Connect your antenna or cable box here.

DIGITAL AUDIO OUT (COAXIAL) jack

Connect an optional coaxial digital audio cable here through the coaxial digital audio in jack of a decoder or audio receiver.

 

 

 

AUDIO OUT jacks

 

 

 

Audio cable connection for external

 

 

 

audio equipment. Use AUDIO IN jacks

 

 

 

of external equipment.

ANT. IN

L

L

HDMI IN jacks

 

 

AUDIO OUT

AUDIO

Connect HDMI cable and audio

 

DIGITAL

HDMI IN

 

AUDIO OUT R

R

cable coming from the HDMI and

 

(COAXIAL)

 

 

 

HDMI

audio out jack of external devices.

 

from underneath

 

 

 

 

 

Rear of this TV

FUNCTIONS

COMPONENT IN jacks

Connect component cable and audio cable coming from the component and audio out jack of external devices.

 

 

 

 

from underneath

S-VIDEO1 jack

 

 

 

 

 

 

 

 

Y

 

Y

VIDEO

VIDEO

 

S-Video cable and audio

 

 

 

 

 

 

 

(VIDEO1) cable connection for

 

Pb

 

Pb

 

 

 

external video equipment.

L

Pr

L

Pr

L

L

 

S-VIDEO2 jack

AUDIO

AUDIO

AUDIO

AUDIO

S-VIDEO1

R

 

R

 

R

R

 

S-Video cable and audio

COMPONENT2

COMPONENT1

VIDEO2

VIDEO1

S-VIDEO2

(VIDEO2) cable connection for

 

 

 

 

 

 

 

external video equipment.

 

 

 

 

VIDEO IN jacks

 

 

 

 

 

Connect video cable and

 

 

 

 

audio cable coming from

 

 

 

 

the video and audio out

 

 

 

 

jack of external devices.

INSTALLING THE BATTERIES

Install two AA batteries (supplied) matching the polarity indicated inside battery compartment of the remote control.

[BATTERY PRECAUTIONS]

Be sure to follow the correct polarity as indicated in the battery compartment. Reversed batteries may cause damage to the device.

Do not mix different types of batteries together (e.g. Alkaline and Carbon-Zinc) or old batteries with fresh ones.

If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from possible battery leakage.

Do not try to recharge batteries not intended to be recharged; they can overheat and rupture.

7

EN

PREPARATION FOR USE

CONNECTION

This section describes how to connect this TV to reception and other sources.

MAKE SURE YOU HAVE AN ANTENNA.

As DTV is only available over the air, you need an antenna to receive digital signal.

NOTE:

Be sure that antenna or cable is connected properly before plugging the power cord.

[ANTENNA CABLE CONNECTION]

1)When connecting TV to antenna

Connect the RF cable or antenna cable on your home outlet to the ANT. IN jack of this TV.

2)When connecting TV to RF/Incoming cable (without box)

Connect the RF cable or incoming cable on your home outlet to the ANT. IN jack of this TV.

Aerial

 

antenna

RF Cable

 

Cable TV

Incoming Cable

signal

 

 

Cables not included

or

ANT. IN

Rear of this TV

NOTES:

For your safety and to avoid damages to the unit, unplug the antenna cable from the ANT. IN jack before moving the unit.

If you use an antenna in order to receive analog TV, the same antenna generally will work for DTV reception. Outdoor or attic antennas will be more effective than set-top versions.

To easily switch between antenna and cable wires, you can purchase “Antenna Selector” commercially available.

If you connect cable system directly, contact the CATV installer.

*Once connections are completed, turn on the TV and begin initial setup.

Channel scanning is necessary for the TV to memorize all available channels in your area if using antenna or RF/Incoming cable. (Refer to “INITIAL SETTINGS” on page 12.)

[CONNECTION TO CABLE/SATELLITE BOX]

1)Connect the antenna cable on your home outlet to the input jack of the CABLE/SATELLITE box.

2)Use the corresponding cable to connect the ANT. IN jack of this TV and the output jack of the

CABLE/SATELLITE box.

*Required cables in 2) and connecting methods differ depending on the CABLE/SATELLITE box. For more information, please contact the cable/satellite provider.

Satellite antenna

CABLE Box

or SATELLITE Box

Cable TV or

RF Cable

signal

 

 

Cables not included

ANT. IN

Rear of this TV

8

EN

EXTERNAL CONNECTION

[HDMI CONNECTION]

1)This is the best method to connect this TV to video devices with the HDMI output jack, such as DVD player with HDMI output jack, etc. It can minimize the deterioration of image quality.

Use the HDMI cable (commercially available) for connection.

 

 

 

To HDMI INPUT jack

 

HDMI OUT

 

 

 

 

 

ANT. IN

L

L

 

 

 

 

To HDMI output jack

 

AUDIO OUT

AUDIO

 

DIGITAL

 

HDMI IN

DVD Player with the HDMI output jack

 

AUDIO OUT

R

R

 

(COAXIAL)

 

 

 

 

 

 

 

Cables not included

 

 

HDMI

 

 

 

 

 

 

Rear of this TV

NOTES:

This TV accepts 480i / 480p / 720p / 1080i video signals, and 32kHz / 44.1kHz / 48kHz audio signals. This TV accepts only 2 channel audio signal (LPCM).

You need to select “PCM” for the digital audio output of the device you connect or the HDMI audio setting. Audio sometimes makes no sound if you select “Bitstream”, etc..

This TV only accept signals corresponding EIA861.

2)When your video devices has the DVI output jack, use the HDMI conversion cable from DVI output jack (commercially available) for connection as illustrated below.

To DVI output jack

To HDMI INPUT jack

Cable Box or Satellite Box with the DVI output jack

DVI OUT

 

 

 

 

ANT. IN

L

 

 

 

 

 

AUDIO OUT

AUDIO

AUDIO OUT

DIGITAL

HDMI IN

R

L

AUDIO OUT

R

 

 

(COAXIAL)

 

 

 

 

HDMI

To audio

To AUDIO INPUT

Rear of this TV

output jacks

jacks

 

Cables not included

NOTES:

This TV accepts 480i / 480p / 720p / 1080i video signals.

Audio signals are converted to an analog signal from the digital if you make a connection above. DVI does not show image if the 480i does not accept EIA/CEA-861/861B.

“HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.”

PREPARATION FOR USE

9

EN

[COMPONENT CONNECTION]

1)This is a better method to connect this TV to video devices with the Component output jack, such as DVD player, etc.

Use the Component cable (commercially available) for connection.

If you connect component output jack to COMPONENT1 input jack, connect an audio cable to AUDIO L/R jacks of COMPONENT1.

If you connect component output jack to COMPONENT2 input jack, connect an audio cable to AUDIO L/R jacks of COMPONENT2.

DVD Player with the component video output jacks

 

To component video

 

 

To COMPONENT1

 

 

output jacks

 

 

INPUT jacks

 

 

 

 

Y

 

Y

VIDEO

VIDEO

 

 

 

Pb

 

Pb

 

 

 

 

L

 

L

 

 

 

 

 

AUDIO

Pr

AUDIO

Pr

AUDIO

AUDIO

S-VIDEO1

 

 

 

R

 

R

 

 

 

 

 

COMPONENT2

COMPONENT1

VIDEO2

VIDEO1

S-VIDEO2

 

 

To audio output

 

 

 

 

 

 

jacks

To AUDIO INPUT

 

 

Rear of this TV

 

jacks

 

 

 

 

 

 

Cables not included

NOTE:

This TV accepts 480i / 480p / 720p / 1080i video signals.

[S-VIDEO CONNECTION]

1)This is a good method to connect this TV to the video devices with the S-video output jack. You can expect better picture quality than the normal video cable connection.

Use the S-video cable (commercially available) for connection.

If you connect S-video output jack to S-VIDEO1 input jack, connect an audio cable to AUDIO L/R jacks of VIDEO1.

If you connect S-video output jack to S-VIDEO2 input jack, connect an audio cable to AUDIO L/R jacks of VIDEO2.

 

 

 

 

 

 

 

 

To S-VIDEO1

 

 

 

 

 

 

 

 

INPUT jack

 

To S-video

 

 

 

 

 

 

 

 

output jack

 

Y

 

Y

VIDEO

VIDEO

 

 

 

 

 

 

 

AUDIO

VIDEO

S

 

Pb

 

Pb

 

 

 

OUT

OUT

OUT

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

L

 

L

 

 

 

 

 

 

 

AUDIO

Pr

AUDIO

Pr

AUDIO

AUDIO

S-VIDEO1

 

 

 

 

DVD/VCR with

 

 

R

 

R

 

 

 

 

the S-video output jack

To audio

 

 

 

 

 

 

 

 

 

 

 

S-VIDEO2

 

output jacks

COMPONENT2

COMPONENT1

VIDEO2

VIDEO1

 

 

Rear of this TV

Cables not included

To AUDIO INPUT jacks

 

NOTE:

If you connect to the S-VIDEO jack and the VIDEO jack at the same time, S-video connection will have priority.

10

EN

[ANALOG AUDIO/VIDEO CONNECTION]

1)This is the general method to connect this TV to video devices with the video and audio output jacks, such as VCR, Camcorder, Video Game, etc..

When the audio jack of video devices is monaural, connect this TV to the Audio L jack.

 

 

 

To VIDEO1 INPUT jack

 

 

 

 

 

To video

 

 

 

 

 

 

 

 

output

 

 

Y

 

Y

VIDEO

VIDEO

 

 

jack

 

 

 

 

 

 

 

 

 

AUDIO

 

 

Pb

 

Pb

 

 

 

 

OUT

OUT

 

 

 

 

 

 

 

 

 

 

 

 

 

Camcorder

Video Game

 

L

 

L

 

 

 

 

 

AUDIO

Pr

AUDIO

Pr

AUDIO

AUDIO

S-VIDEO1

 

 

 

 

 

 

To audio output

R

 

R

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

jacks

COMPONENT2

COMPONENT1

VIDEO2

VIDEO1

S-VIDEO2

VCR

Rear of this TV

Cables not included

To AUDIO INPUT

jacks

[AUDIO OUTPUT CONNECTION]

1)If you connect this TV to an external audio device, you can enjoy multi-channel audio like 5.1ch digital broadcasting sound.

Use the Digital Audio Coaxial cable or Audio cable (commercially available) for connection.

 

 

To DIGITAL AUDIO

 

 

OUTPUT jack

MD deck, DAT deck etc.

 

 

 

COAXIAL

 

 

 

 

ANT. IN

L

 

 

 

 

To coaxial digital

 

UDIO OUT

AUDIO

DIGITAL

R

HDMI IN

audio input jack

AUDIO OUT

 

(COAXIAL)

 

 

 

 

 

 

 

 

HDMI

 

Rear of this TV

To AUDIO

 

 

OUTPUT jacks

Dolby Digital decoder or

AUDIO

IN

To audio input jacks

Stereo system

Cables not included

Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.

PREPARATION FOR USE

11

EN

INITIAL SETTINGS

Hint: Before starting initial setup you must connect antenna.

INITIAL SETTINGS

This section describes the initial settings when you first turn on the power after purchase. The initial setting items are shown below.

• LANGUAGE SELECTION

You can select the menu language displayed on the screen among English, Spanish and French.

AUTOSCAN (TV/DTV)

(Select “Air” when using antenna)

The channels broadcasted in TV and DTV are automatically scanned and memorized. Only the receivable channels in the area where this TV is used will be memorized.

AUTOSCAN (CATV)

(Select “Cable” when using RF/Incoming cable)

The channels broadcasted in CATV are automatically scanned and memorized.

POWER

SLEEP

INPUT

SELECT

1

2

3

4

5

6

 

 

AUDIO

7

8

9

 

 

STILL

-

0

 

SETUP

 

SCREEN

 

MODE

3Select your language using [K/L], press

[ENTER].

When you first turn on the power, the following screen is displayed.

InitialI i i l Setup

 

 

Select the language used for setup.

English

Elija idioma de preparación.

 

Español

Sélectionner langue écran config.

Français

Select

ENTER Enter

SETUP

Exit

The

 

in

the selected language after you press [ENTER].

4Select destination of ANT. IN jack using [K/L], press [ENTER].

Make sure the antenna is connected to "ANT IN" jack.

Select the destination of "ANT. IN" jack.

Air

 

 

 

Cable

Or

 

 

 

 

ANT. IN

 

Select

ENTER Enter

BACK

SETUP

Back

Exit

5 Autoscan will start automatically.

ENTER

BACK

INFO

1 After making

connections, turn

on this TV.

 

 

 

2 Press [POWER]

menu will appear.

• This operation

moments.

• If Initial Setup

appear press

and hold

initial setup

will appear

3. If you have

already turned

refer to “LAN-

GUAGE

17 to select a

language for

displays.

12

When

memorized channel will be displayed.

NOTES:

The initial Autoscan function can be executed for either “Air” or “Cable” only once. When you change the connection (Air/Cable), set the “Autoscan” again. (Refer to page 13.)

If you connect cable system directly, contact the CATV installer.

When the scanning is not completed, Helpful Hint will be displayed every time you turn on the power. If you have previously registered channels when this screen appears you can select a channel with number buttons.

2-0

No channel is registered.

Press and hold "ENTER" key for 3 seconds.

Contact support hotline provided on manual or back of unit.

Sin canal registrado.

Mantenga oprimida la tecla "ENTER" durante 3 segundos.

Llame teléfono de apoyo en manual o atrás de TV.

Pas de chaîne consign.

Maintenir la touche "ENTER" pressée 3 secondes.

Contacter numero d'urgence dans manuel ou arrière appareil.

Support hotline is provided on the front page of this manual.

EN

CHANNEL SETTINGS

AUTOSCAN

If you switch wires (e.g. between antenna and CATV) or if you move the TV to a different area after the initial setting, you need to perform Autoscan again. This function lets you easily select the receivable channels with [CH K/L] and the TV memorizes them even if you switch wires.

 

 

STILL

-

0

 

SETUP

 

SCREEN

 

MODE

 

ENTER

 

BACK

 

INFO

 

CH RETURN

 

VOL.

MUTE

CH

 

 

NOTE:

• Make sure if the or cable.

1Display the setup screen.

Press [SETUP].

The following setup screen is displayed.

2 Select

con-

firm.

 

• Using [K/L], select “Autoscan”.

 

Channell

Autoscan

Channel List

Manual Register

Antenna

3For TV channels, using [K/L], select “Air”. For CATV channels, select “Cable”.

Autoscan

 

 

Autoscan will rescan all channels.

Back

 

This may take a while to complete.

Air

 

 

Select the destination of "ANT. IN" jack.

Cable

 

 

Air

 

Cable

 

1hour

 

 

Cable

Or

 

 

ANT. IN

 

Press

Scanning and memorizing the channels automatically starts.

Now the system is scanning for channels, please wait.

72%

Analog channels

10ch

Digital channels

6ch

SETUP

Exit

 

• When completed, the lowest memorized channel in the broadcasting will be displayed.

NOTES:

If you connect a cable system directly, contact the CATV installer.

If you press [POWER] or [SETUP] during Autoscan, this setting will be canceled.

If there is no reception connected or poor signal is detected, a Hint will appear on screen once scanning stops.

• Press

INITIAL SETTINGS / CHANNEL SETTINGS

13

EN

CHANNEL LIST

 

 

3 Select the channel you want to skip.

 

 

 

The Channel List function lets you skip the unnec-

• Using [K/L], select the channel.

essary channels from the Channel registration list.

Channell Listi

 

 

 

 

 

 

 

 

 

STILL

 

 

 

-

0

 

Highlight channels for

DTV

6

 

Ch Up/Down key selection.

DTV

8

 

 

SCREEN

 

SETUP

 

 

 

9

 

MODE

 

 

 

 

 

 

 

27

 

 

 

 

DTV

48

 

 

 

 

 

58

 

ENTER

 

 

DTV

67

 

 

 

Ch Select ENTER Watch/Skip

BACK

 

BACK

 

INFO

Back

 

 

 

 

 

 

CH RETURN

 

VOL.

MUTE

CH

 

 

1 Display the

 

• Press [SETUP]

 

The following

displayed.

Press

selected channel disappears, then the channel is set as skip. With [CH K/L], you cannot select the channel set as skip.

If you want to receive the skipped channel, select your desired channel and press

[ENTER].

If you skip a major channel, you skip the minor channels too.

NOTE:

The channel with “DTV” indicated on the display is ATSC, otherwise the channel is NTSC.

4 To exit the setup, press [SETUP].

2 Select

con-

firm.

 

• Using [K/L], select “Channel List”.

 

Channell

Autoscan

Channel List

Manual Register

Antenna

• Press

14

EN

MANUAL REGISTER

You can register remainder of channels that were not scanned by the Autoscan function due to the bad reception status at the initial setting.

POWER

SLEEP

INPUT

SELECT

1

2

3

4

5

6

 

 

AUDIO

7

8

9

 

 

STILL

-

0

 

SETUP

 

SCREEN

 

MODE

 

 

ENTER

BACK

 

INFO

1 Display the

 

• Press [SETUP]

 

The following

displayed.

2 Select

con-

firm.

 

• Using [K/L]

Register”.

Channell

 

Autoscan

 

Channel List

 

Manual Register

 

Antenna

 

• Press

3Select the channel you want to add.

Using Channel number buttons, select your desired channel.

11

Manuall Registeri

 

 

 

 

 

 

For Analog channels,

Register

 

 

select a channel to register

 

 

 

using number keys.

 

 

 

For Digital channels,

 

 

 

you must perform Autoscan function.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

BACK

Back

 

 

Ch Change

 

 

 

 

• Select

4To exit the setup, press [SETUP].

NOTES:

If the setup is completed successfully, “Registered to the channel list.” is shown on the screen.

If “Video1” is being used set up will not be completed successfully. “Unavailable” will be shown on screen.

CHANNEL SETTINGS

15

EN

ANTENNA CONFIRMATION

You can verify the signal strength of each channel to get a clearer picture.

POWER

SLEEP

INPUT

SELECT

1

2

3

 

4

5

6

 

7

8

9

AUDIO

 

 

 

 

STILL

-

0

 

 

SETUP

 

 

SCREEN

 

 

MODE

 

 

ENTER

 

BACK

 

 

INFO

 

CH RETURN

 

VOL.

 

MUTE

CH

 

 

 

1 Display the

 

• Press [SETUP]

 

The following

displayed.

2 Select

con-

firm.

 

• Using [K/L], select “Antenna”.

Channell

Autoscan

Channel List

Manual Register

Antenna

Press

Using Channel number buttons or [CH K/L], select the channel you want to confirm the antenna situation.

 

 

11

Antenna

 

 

 

 

Back

Now

70 Peak

80

CH

Ch Change

16

If the channel is set to external input, you cannot confirm the antenna situation.

 

Video1

Antenna

 

 

Back

Indicator is available

for antenna signal only.

CH

Ch Change

3 To e

EN

LANGUAGE SELECTION

You can choose your on screen language from one of the following English, Spanish or French.

 

 

STILL

-

0

 

SETUP

 

SCREEN

 

MODE

 

ENTER

 

BACK

 

INFO

 

CH RETURN

 

VOL.

MUTE

CH

 

 

1 Display the

 

• Press [SETUP]

 

The following

displayed.

2 Select

to con-

firm.

 

Using [K/L], select “English”, “Español” or “Français”.

English

• Press

3 To exit the setup, press [SETUP].

CHANNEL SETTINGS

17

EN

WATCHING TV

CHANNEL SELECTION

You can select the channel by using either [CH K/L] or Channel number buttons. How to select the channel in each way is shown below.

POWER

SLEEP

INPUT

SELECT

1

2

3

4

5

6

 

 

AUDIO

7

8

9

 

 

STILL

-

0

 

SETUP

 

SCREEN

 

MODE

NTSC

18:00

ATSC

 

 

 

 

 

CH4-1

No signal

No signal

 

18:30

 

 

 

CH4-1 CH4-2

CH4-3

CH4

19:00

 

 

 

CH4-1

No signal

CH4-3

 

19:30

 

 

 

CH4-1

CH4-2

No signal

20:00

: changes automatically

: change manually by pressing [CH /] on your remote control.

 

ENTER

 

BACK

 

INFO

 

CH RETURN

 

VOL.

MUTE

CH

 

 

1 Using [CH K/

 

 

number buttons

and pressing

 

 

 

• Using [CH

 

 

channel.

• When you

 

 

press the channel

number you

 

 

Channel number

buttons. The

 

 

will be displayed.

• When

 

 

 

12

1

2

 

 

 

• When

 

 

 

12-1

Be sure to

 

 

entering the

minor-channel

 

 

1

2

-

1

ENTER

If the channel broadcasts NTSC and ATSC both and you don't press [–], then you will receive the NTSC channel only. The moment you press [–], the lowest memorized digital channel will be displayed.

When you press [CH RETURN], the previously selected channel will be selected.

Same operation is available with [CHANNEL K/L] on the top panel of the main unit.

NOTE:

In the DTV broadcasting, one channel sometimes broadcasts multiple programs depending on the air time. In this case, the main channel is called major channel and the minor-channel is called minor channel.

NOTE:

“No signal” will appear on the screen after the minorchannel broadcast is over.

You will need to change the channel to continue watching another TV program.

VOLUME ADJUSTMENT

This section describes how to adjust the volume when viewing TV. The Mute function, which is useful when you have a visitor or a phone call, will be also described.

BACK

 

INFO

 

CH RETURN

 

VOL.

MUTE

CH

 

 

 

 

 

 

 

 

 

 

1 Using [VOL.

 

 

 

 

 

 

[VOL. X/Y]

 

 

 

with [VOL. X/Y].

• You can adjust

 

 

 

• The volume

 

 

 

the bottom of

the screen

 

 

 

volume.

• Same operation

 

 

 

[VOLUME

X/Y] on the

 

 

 

main unit.

 

 

 

 

 

 

 

 

 

Volume

 

 

 

 

 

 

 

 

 

 

 

 

 

 

• The

 

 

 

 

 

dis-

appear in a

 

 

 

 

 

 

[MUTE]

Press [MUTE] on the remote control to mute the sound.

To release the Mute status, press [MUTE] again or press [VOL. X/Y].

Mute

About minor-channel broadcasting:

There may be different programs being broadcast on minor-channels through a single channel from ATSC. You can watch each minorchannel program being broadcast by selecting one of the minor-channels.

• “Mute”

few sec-

onds.

 

18

EN

+ 54 hidden pages