Size:
540.48 Kb
Download

OWNER’S

MANUAL

13-INCHCOLOR TV/DVD

6513DA

TM

INSTRUCCIONES EN ESPAÑOL INCLUIDAS.

If you need additional assistance for set-upor operating after reading owner’s manual, please call

TOLL FREE : 1-800-968-3429.

Please read before using this equipment

AVERTISSEMENT POUR UNE TABLE ROULANTE PORTATIVE
S3126A
PORTABLE CART WARNING

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE

TO RAIN OR MOISTURE.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The caution marking is located on the rear of the cabinet.

THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT.

THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING AND MAINTENANCE INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE APPLIANCE.

IMPORTANT SAFEGUARDS

1.Read instructions-Allthe safety and operating instructions should be read before the appliance is operated.

2.Retain Instructions-Thesafety and operating instructions should be retained for future reference.

3.Heed Warnings-Allwarnings on the appliance and in the operating instructions should be adhered to.

4.Follow Instructions-All operating and use instructions should be followed.

5.Cleaning-UnplugTV/DVD from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.

EXCEPTION: A product that is meant for uninterrupted service and, that for some specific reason, such as the possibility of the loss of an authorization code for a CATV converter, is not intended to be unplugged by the user for cleaning or any other purpose, may exclude the reference to unplugging the appliance in the cleaning description otherwise required in item 5.

6.Attachments-Donot use attachments not recommended by the TV/DVD manufacturer as they may cause hazards.

7.Water and Moisture-Donot use this TV/DVD near waterfor example, near a bath tub, wash bowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, and the like.

8.Accessories-Donot place this TV/DVD on an unstable cart, stand, tripod, bracket, or table. The TV/DVD may fall, causing serious injury to someone, and serious damage to the appliance. Use only with a cart, stand, tripod, bracket, or table recommended by the manufac-

turer, or sold with the TV/DVD. Any mounting of the appliance should follow the manufacturer’s instructions and should use a mounting

accessory recommended by the manufacturer. An appliance and cart combination should be moved with

care. Quick stops, excessive force, and

uneven surfaces may cause the appliance and cart combination to overturn.

Accessoires- Ne placez pas cette TV/DVD sur une table roulante, un support, un trépied, une console ou une table instable. Cette TV/DVD risquerait de tomber, pouvant gravement blesser quelqu'un et l'appareil même pourrait être sérieusement endommagé. N'utilisez qu'une table roulante, un support, un trépied, une console ou une table recommandé par le fabriquant, ou vendu avec la TV/DVD. Pour n'importe quelle installation de l'appareil, on devra suivre les instructions du fabriquant et l'on devra utiliser les accessoires d'installation recommandés par le fabriquant. L'ensemble combiné de l'appareil avec une table roulante devra être déplacé avec précaution. Des arrêts brusques, une force excessive et des surfaces inégales peuvent provoquer le renversement de l'ensemble combiné de l'appareil/table roulante.

9.Ventilation-Slotsand openings in the cabinet and the back or bottom are provided for ventilation and to ensure reliable operation of the TV/DVD and to protect it from overheating, and these openings must not be blocked or covered. The openings should never be blocked by placing the TV/DVD on a bed, sofa, rug, or other similar surface. This TV/DVD should never be placed near or over a radiator or heat register. This TV/DVD should not be placed in a builtin installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instructions have been adhered to.

10.Power Sources-ThisTV/DVD should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your appliance dealer or local power company. For TV/DVDs intended to operate from battery power, or other sources, refer to the operating instructions.

11.Grounding or Polarization-This TV/DVD is equipped with a polarized alternating-current line plug(a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.

- 2 -

EN

0C28

F IGURE A

EXAMPLE OF ANTENNA GROUNDING AS PER

NATIONA L ELECT RIC AL CODE

 

ANTENNA

 

LEAD I N

 

W I R E

 

GROUND

 

C L A M P

 

ANTENNA

 

DI SCHARGE UN I T

 

(NEC SECTION 810 -20)

ELECTRI C

 

SE RV I CE

 

EQU I PMEN T

 

 

GROUNDI NG CONDUCTORS

 

(NEC SECTION 810 -21)

 

GROUND CL AMPS

NEC - NATI O NAL ELECTRI CAL CODE

POWER SERVI C E GROUNDI NG

 

ELEC TR ODE SYSTEM

S2 8 9 8 A

(NEC ART 250 , PART H)

12.Power-Cord Protection-Power-supplycords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance.

13.Outdoor Antenna grounding-If an outside antenna or cable system is connected to the TV/DVD, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA No. 70, provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. (Fig. A)

14.Lightning-Foradded protection for this TV/DVD receiver during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the TV/DVD due to lightning andpower-linesurges.

15.Power Lines-Anoutside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.

16.Overloading-Donot overload wall outlets and extension cords as this can result in a risk of fire or electric shock.

17.Object and Liquid Entry-Neverpush objects of any kind into this TV/DVD through openings as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the TV/DVD.

18.Servicing-Donot attempt to service this TV/DVD yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

19.Damage Requiring Service-Unplug this TV/DVD from the wall outlet and refer servicing to qualified service personnel under the following conditions:

a.When the power-supplycord or plug is damaged or frayed.

b.If liquid has been spilled, or objects have fallen into the TV/DVD.

c.If the TV/DVD has been exposed to rain or water.

d.If the TV/DVD does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions, as improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the TV/DVD to its normal operation.

e.If the TV/DVD has been dropped or damaged in any way.

f.When the TV/DVD exhibits a distinct change in perfor- mance-thisindicates a need for service.

20.Replacement Parts-Whenreplacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, injury to persons or other hazards.

21.Safety Check-Uponcompletion of any service or repairs to this TV/DVD, ask the service technician to perform routine safety checks to determine that the TV/DVD is in proper operating condition.

22.Heat-ThisTV/DVD product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat.

- 3 -

EN

0C28

PRECAUTIONS

IMPORTANT COPYRIGHT INFORMATION

Unauthorized copying, broadcasting, public performance and lending of discs are prohibited.

FCC WARNINGThis equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made.

RADIO-TVINTERFERENCE

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

1)Reorient or relocate the receiving antenna.

2)Increase the separation between the equipment and receiver.

3)Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

4)Consult the dealer or an experienced radio/TV technician for help.

LASER SAFETY

This unit employs a laser. Only a qualified service person should remove the cover or attempt to service this device, due to possible eye injury.

CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

CAUTION: VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK DEFEATED. DO NOT STARE INTO BEAM.

LOCATION: INSIDE, NEAR THE DECK MECHANISM.

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B est conforme à la norme NMB-003du Canada.

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

ATTENTION: POUR ÉVITER LES CHOC ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU’AU FOND.

- 4 -

EN

0C28

LOCATION

WARNING

For safe operation and satisfactory performance of your TV/DVD, keep the following in mind when selecting a place for its installation:

Shield it from direct sunlight and keep it away from sources of intense heat.

Avoid dusty or humid places.

Avoid places with insufficient ventilation for proper heat dissipation. Do not block the ventilation holes at the top and bottom of the unit. Do not place the unit on a carpet because this will block the ventilation holes.

Install unit in a horizontal position.

Avoid locations subject to strong vibration.

Do not place the TV/DVD near strong magnetic fields.

Avoid moving TV/DVD to locations where temperature differences are extreme.

AVOID THE HAZARDS OF ELECTRICAL SHOCK AND FIRE

Do not handle the power cord with wet hands.

Do not pull on the power cord when disconnecting it from an AC wall outlet. Grasp it by the plug.

If, by accident, water is spilled on your unit, unplug the power cord immediately and take the unit to our Authorized Service Center for servicing.

Do not put your fingers or objects into the TV/DVD disc loading tray.

Do not place anything directly on top of the unit.

Moisture condensation may occur inside the unit when it is moved from a cold place to a warm place, or after heating a cold room or under conditions of high humidity. If a DVD is played in a TV/DVD which has moisture, it may damage the DVD and TV/DVD. Therefore when the condensation occurs inside the unit, turn the POWER button on and allow at least 2 hours for the unit to dry out.

A NOTE ABOUT RECYCLING

This product’s packaging materials are recyclable and can be reused. Please dispose of any materials in accordance with your local recycling regulations.

Batteries should never be thrown away or incinerated but disposed of in accordance with your local regulations concerning chemical wastes.

The serial number of this product may be found on the back of the unit. No other TV/DVD has the same serial number as yours. You should record the number and other vital information here and retain this book as a permanent record of your purchase to aid identification in case of theft. Serial numbers are not kept on file.

Date of Purchase

Dealer Purchase from

Dealer Address

Dealer Phone No.

Model No.

Serial No.

- 5 -

EN

0C28

TABLE OF CONTENTS

C IMPORTANT SAFEGUARDS . . . . . . . . . . . . .2

C PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . .4

LOCATION . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

AVOID THE HAZARDS OF ELECTRICAL SHOCK AND FIRE . . . . . . . . . . . . . . . . . . . . . .5

WARNING . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

C FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

C SUPPLIED ACCESSORIES . . . . . . . . . . . . . . .7

C OPERATING CONTROLS AND FUNCTIONS 8

C PREPARATION FOR USE . . . . . . . . . . . . . . .10

ANTENNA/CABLE CONNECTIONS . . . . . . .10

INSTALLING THE BATTERIES . . . . . . . . . . .12

CONNECTING TO EXTERNAL INPUT JACKS .12

CONNECTING TO A STEREO SYSTEM (for DVD) .13

CONNECTING TO AN AMPLIFIER EQUIPPED WITH DIGITAL INPUT JACKS, MD DECK OR DAT DECK (for DVD) . . . . . .13

CONNECTING TO A DOLBY DIGITAL DECODER OR DTS DECODER (for DVD) . .14

TV SECTION

 

C SET UP FOR USE . . . . . . . . . . . . . . . . . . . . .

15

LANGUAGE SELECTION . . . . . . . . . . . . . . .15 CHANNEL PRESETTING . . . . . . . . . . . . . . .15

C OPERATIONS . . . . . . . . . . . . . . . . . . . . . . . . .16

WATCHING A TV PROGRAM . . . . . . . . . . . .16 SELECTING THE SLEEP TIMER . . . . . . . . .16 CLOSED CAPTION . . . . . . . . . . . . . . . . . . . .16 PICTURE ADJUSTMENT . . . . . . . . . . . . . . . .17 V-CHIPSET UP . . . . . . . . . . . . . . . . . . . . . . . .18

DVD SECTION

CABOUT THE DISCS . . . . . . . . . . . . . . . . . . . .20

PLAYABLE DISCS . . . . . . . . . . . . . . . . . . . . .20 DISC TYPES . . . . . . . . . . . . . . . . . . . . . . . . . .20 SYMBOLS USED IN THIS MANUAL . . . . . .20

C PLAYING A DISC . . . . . . . . . . . . . . . . . . . . . .21

PLAYING A DVD VIDEO OR AN AUDIO CD .21 USING THE DVD MENUS . . . . . . . . . . . . . . .21 USING THE TITLE MENU . . . . . . . . . . . . . . .22

PAUSING PLAYBACK OR DISPLAYING

A STILL PICTURE . . . . . . . . . . . . . . . . . . . . .22

RESUMING PLAYBACK FROM THE

POINT WHERE PLAYBACK STOPPED . . . .22 STEPPING THROUGH FRAMES . . . . . . . . . .22 FAST FORWARD/REVERSE . . . . . . . . . . . . .23 SLOW MOTION . . . . . . . . . . . . . . . . . . . . . . .23 STARTING FROM A DESIRED TRACK . . . .23 STARTING FROM A DESIRED TIME COUNT .23

PLAYING FROM A DESIRED TITLE OR CHAPTER . . . . . . . . . . . . . . . . . . . . . . . . . . . .24

RANDOM (Audio CD) . . . . . . . . . . . . . . . . . .24

REPEAT . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24

A-BREPEAT . . . . . . . . . . . . . . . . . . . . . . . . . .25

PROGRAM (Audio CD) . . . . . . . . . . . . . . . . .25

C SETTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . .26

CHANGING THE AUDIO LANGUAGE OR SOUND MODE . . . . . . . . . . . . . . . . . . . . . . . .26

CHANGING THE SUBTITLE LANGUAGE . .27

CHANGING THE CAMERA ANGLE

(Multi-AnglePictures) . . . . . . . . . . . . . . . . . . .27

CHANGING THE ON-SCREENDISPLAY . . .28

C CHANGING THE SETUP ITEMS . . . . . . . . .29

LANGUAGE SETTINGS . . . . . . . . . . . . . . . .29 VIDEO SETTINGS . . . . . . . . . . . . . . . . . . . . .30 AUDIO SETTINGS . . . . . . . . . . . . . . . . . . . . .30 PARENTAL LOCK . . . . . . . . . . . . . . . . . . . . .31 OTHER SETTINGS . . . . . . . . . . . . . . . . . . . . .32

C LANGUAGE CODE LIST . . . . . . . . . . . . . . . .33

C TROUBLESHOOTING GUIDE . . . . . . . . . . .34

C MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . .37

DISC HANDLING . . . . . . . . . . . . . . . . . . . . . .37

C SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . .38

C WARRANTY . . . . . . . . . . . . . . . . . . .Back Cover

- 6 -

EN

0C28

FEATURES

TV

Tinted, Bright Black Matrix Picture Tube

181 Channel Selection– All VHF/UHF channels plus up to 125 cable channels.

PLL Frequency Synthesized Tuning– The latest PLL frequency synthesized electronic tuning system provides free and easy channel selection, and lets you tune directly to any channel using the channel number buttons (0~9 and +100-key) on the remote control.

On-ScreenFunction Display.

Full-FunctionRemote Control

Sleep Timer

Closed Caption Decoder– You may view specially labeled (cc) TV programs, movies, news, prerecorded tapes, etc. with either a dialogue caption or text display added to the program.

Auto Shut Off Function– If there is no air signal input from the antenna terminal and no operation for 15 minutes, the TV will turn itself off automatically.

V-CHIP– Enables parents to prevent their children from watching inappropriate material on TV.

DVD

Dolby Digital sound– This player can handle Dolby Digital surround sound having 5.1 channels when connected to a Dolby Digital decoder.

Still/fast/slow/step playback– Various playback modes are available including still pictures, fast forward/reverse, slow motion and step frames.

Random playback for audio CD– This player can shuffle the order of tracks to play them in random order.

Program playback for audio CD– You can program the order of tracks to play them in any desired order.

DVD menus in a desired language– You can display DVD menus in a desired language, if available on a DVD.

Screen saver and auto power-offfunctions–

Screen saver is automatically activated when there is no input from the player or the remote control for one minute in stop mode. The power is automatically turned off when there is no input for 31 minutes in still or stop mode.

Subtitles in a desired language– You can select a desired language for the display subtitles, if that language is available on a disc.

Selecting a camera angle– You can select the desired camera angle, if a disc contains sequences recorded from different angles.

Choices for audio language and sound mode–

You can select the desired audio language and sound mode, if different languages and modes are available on a disc.

Parental lock– You can set the control level to limit playback of discs which may not be suitable for children.

Automatic detection of discs– This player automatically detects if a loaded disc is DVD or audio CD.

On-screen display– Information about the current operation can be displayed on a TV screen, allowing you to confirm the currently active functions (such as program playback), on the TV screen using the remote control.

SUPPLIED ACCESSORIES

Remote Control Unit

2 AA Batteries

Rod Antenna

PART NO. (N0285UD)

 

PART NO. (0EMN00673)

If you need to replace these accessories, please refer to the PART NO. under the illustrations and call 1-800-968-3429.

Depending on your antenna system, you may need different types of Combiners (Mixer) or Separators (Splitter). Contact your local electronics store for these items.

- 7 -

EN

0C28

OPERATING CONTROLS AND FUNCTIONS

- TV/DVD FRONT PANEL - [Fig. 1]

VIDEO L-AUDIO-R

POWER VOLUME

CHANNEL

STOP

SKIP PLAY SKIP PAUSE OPEN/CLOSE

HEADPHONE

1

2

3

4

5

6

7

8

18 10 18

12

13

14

- REMOTE CONTROL - [Fig. 2]

15

 

POWER

TV

DVD

OPEN/

4

CLOSE

 

 

 

 

 

1

2

3

 

16

 

 

 

CH.

4

5

6

 

 

7

8

9

 

17

SLEEP

 

+100

VOL.

 

0

+10

 

18

SKIP

SELECT

MUTE

 

 

 

 

10

 

 

SLOW

 

PLAY

 

9

REV

 

 

FWD

 

STOP

 

 

 

 

12

PAUSE

 

 

MENU

 

 

 

 

19

MODE

 

 

 

 

 

ENTER

 

 

 

 

 

20

SETUP

TITLE

 

RETURN

 

 

 

 

21

CLEAR SEARCH MODE REPEAT

A-B

22

 

 

 

 

 

DISPLAY

AUDIO

SUBTITLE

ANGLE

23

24

25

1.Disc loading tray

2.VIDEO input jack– Connect to the video output jack of a video camera or VCR.

3.AUDIO L/R input jacks– Connect to the audio

36output jacks of a video camera or VCR.

4.POWER button– Press to turn the power on and off.

135. VOLUME K/L buttons– Press to control the vol-

ume level for the DVD and TV.

66. CHANNEL K/L buttons– Press to select memorized channel.

5

7. Remote Sensor Window

8. STOP button– Stops operation of the disc.

 

35

9. REV button– Fast reverses playback to a desired

point.

34

10. PLAY button– Starts playback of the disc contents.

11

11. FWD button– Fast forwards playback to a desired

point.

8

12. PAUSE button– Pauses the current disc operation.

33

13. OPEN/CLOSE button– Press to insert discs into

32

or remove them from the tray.

31

14. HEADPHONE jack– To connect headphone (not

30

supplied) for personal listening.

29

15. TV button– Press to do TV operations.

28

16. NUMBER button–

TV Mode:

27

Press two digits to directly access the desired

26channel.

Remember to press a "0" before a single digit channel.

To use as TV remote control, press the TV but-

 

+100 button–

ton on the remote control after TV mode is

 

Press to select cable channels which are equal or

 

greater than number 100.

selected. TV operation buttons have been indi-

 

 

DVD Mode:

cated by blue or white.

 

 

Press to enter the desired number.

To use as DVD remote control, press the DVD

 

 

+10 button–

button on the remote control after DVD mode is

 

 

Press to enter the desired numbers which are

selected. DVD operation buttons have been

 

 

equal or greater than number 10.

indicated by yellow or white.

 

 

 

 

 

 

- 8 -

EN

0C28

- REAR VIEW - [Fig. 3]

ANT.

DIGITAL AUDIO OUT (PCM/BITSTREAM) AUDIO OUT

COAXIAL R L

37

38

39

40

17.SLEEP button– Press the SLEEP button to display the sleep timer and start the function. The shut off time can be determined by the number of times you press the button. (0, 10, 20, 30,..90, 0 minutes)

18.SKIP buttons– Skip chapters or tracks to a desired point.

19.MODE button– Activates program playback or random playback mode.

30.RETURN button– Returns to the previous operation.

31.ENTER button– Press to accept a setting.

32.Arrow buttons–

TV Mode:

Press to select a setting mode from the menu on the TV screen.

Press to select or adjust from a particular menu.

DVD Mode:

20.SETUP button– Press to enter the setup mode or to change setup items.

21.TITLE button– Displays the title menu.

22.CLEAR button– Resets a setting.

23.DISPLAY button– TV Mode:

Press to display the channel number on the screen. If you press it again, the channel number will disappear.

DVD Mode:

Use when making settings while watching the display on a TV screen.

33.MENU button– Displays the DVD and TV menus.

34.SELECT button– Press to change of TV mode, external input mode or DVD mode.

35.MUTE button– Press the MUTE button to turn off the sound portion of the TV program. (Volume level display turns LIGHT RED from LIGHT BLUE.) Press the MUTE button again or press the VOL(ume)K orL button to restore sound.

Displays the current status on the TV screen for checking purposes.

24.SEARCH MODE button– Press to locate a desired point.

25.AUDIO button– Press to select a desired audio language or sound mode.

26.SUBTITLE button– Press to select a desired subtitle language.

27.REPEAT button– Repeats playback of the current disc, title, chapter or track.

28.ANGLE button– Press to change the camera angle to see the sequence being played back from a different angle.

29.A-B REPEAT button– Repeats playback of a selected section.

36.DVD button– Press to do DVD operations.

37.Power cord– Connect to a standard AC outlet (120V/60Hz).

NOTE: Remove the power cord from the hook to avoid breaking a wire before you connect to a standard AC outlet.

38.COAXIAL digital audio out jack– Connect to the other amplifier or decoder.

39.AUDIO L/R output jack– Connect to the other amplifier or decoder.

40.ANT. in jack– Connect to an antenna, cable system, or satellite system.

- 9 -

EN

0C28

PREPARATION FOR USE

ANTENNA/CABLE CONNECTIONS

VHF/UHF COMBINED ANTENNA

The VHF/UHF Rod Antenna (supplied) is detachable. Insert the stem of the antenna into the hole on the upperback portion of the TV/DVD. Connect the VHF/UHF Rod Antenna or VHF/UHF Combination Antenna to the ANT. terminal of the TV/DVD as shown in the diagram below. For the best reception, fully extend the VHF/UHF Rod Antenna and make the necessary adjustments. (Avoid touching the top section when adjusting.)

NOTE:

Before plugging the Rod antenna into antenna terminal, check that the pin is not bent. If it is bent, straighten the pin as illustrated, then plug the pin into antenna terminal.

Bent pin

Cable Plug

(Needs to be straightened)

(Straight pin)

VHF/UHF Antenna Rod Antenna (Not supplied) (Supplied)

ANT.

[Fig. 4]

NOTE:

The connection of an indoor antenna may not always give acceptable TV reception.

VHF/UHF SEPARATE ANTENNAS

In some areas it will be necessary to use an outdoor antenna.

VHF Antenna (Not supplied)

UHF Antenna (Not supplied)

VHF/UHF Combiner (Not supplied)

ANT.

Flat twin-leadcable

[Fig. 5]

- 10 -

EN

0C28

CABLE WITHOUT CONVERTER/

DESCRAMBLER BOX

Use this connection if your cable system connects directly to your TV/DVD without a converter box.

From Cable System

75-ohmCoaxial Cable (Not supplied)

ANT.

[Fig. 6]

CABLE WITH CONVERTER/

DESCRAMBLER BOX OR SATELLITE BOX

If your cable service supplies you with a converter box or if you use a satellite system, you can use the basic connection shown here.

OUT

IN

Satellite Box or

Cable Box (Not supplied)

From Cable System or Satellite Dish

75-ohmCoaxial Cable

(Not supplied)

ANT.

[Fig. 7]

Note to CATV system installer:

This reminder is provided to call the CATV system installer’s attention to Article 820-40of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building as close to the point of cable entry as practical.

- 11 -

EN

0C28

INSTALLING THE BATTERIES

1)Open the battery compartment cover by pressing the cover on the remote unit in the direction of the arrow. 2)Insert 2 "AA" penlight batteries into the battery compartment in the direction indicated by the polarity (+/-)

markings. 3)Replace the cover.

CONNECTING TO EXTERNAL INPUT JACKS

When you watch a program recorded on an another source (VCR or video camera), use the audio/video input jacks on the front of the TV/DVD.

Connect the audio/video output jacks of another source to the AUDIO L/R and VIDEO jacks of this TV/DVD. Then press the SELECT button until "VIDEO" appears on the screen.

NOTE:

When you connect a monaural VCR (another source) to this TV/DVD, connect the Audio output jack of the monaural VCR (another source) to the AUDIO L jack of this TV/DVD. The audio will output in both L and R channel equally.

[Another source]

etc.

To the video output jack

To the audio output jacks

VIDEO L-AUDIO-R

Audio/Video coaxial cable (not supplied)

[Front of the TV/DVD]

[Fig. 8]

- 12 -

EN

0C28

CONNECTING TO A STEREO SYSTEM (for DVD)

DIGITAL AUDIO OUT

 

ANT.

(PCM/BITSTREAM)

AUDIO OUT

COAXIAL

R

L

Stereo system

To Right (red) and Left (white) AUDIO OUT jacks

(only DVD AUDIO OUT)

To ANALOG AUDIO INPUT jacks

[Fig. 9]

NOTES:

Be sure to turn off the power to all components in the system before connecting another component.

Refer to the Owner's Manuals for your, stereo system and any other components to be connected to the TV/DVD.

CONNECTING TO AN AMPLIFIER EQUIPPED WITH DIGITAL INPUT JACKS, MD DECK OR DAT DECK (for DVD)

Use audio coaxial digital cables (commercially available) for the audio connections.

DIGITAL AUDIO OUT

 

ANT.

(PCM/BITSTREAM)

AUDIO OUT

COAXIAL

R

L

 

To COAXIAL digital

Amplifier equipped with digital

audio out jack

(only DVD AUDIO OUT)

input jacks, MD deck,

 

DAT deck, etc.

To COAXIAL DIGITAL

 

 

AUDIO INPUT jack

[Fig. 10]

NOTES:

The audio source on a disc in a 5.1 channel Dolby Digital surround format cannot be recorded as digital sound by an MD or DAT deck.

Be sure to turn off the power to all components in the system before connecting another component.

Refer to the Owner's Manuals for the components to be connected to the TV/DVD.

Set DOLBY DIGITAL and DTS to OFF for audio output in the setup mode. Playing a TV/DVD using incorrect settings may generate noise distortion, and may also damage the speakers.

When DOLBY DIGITAL is set to OFF and VIRTUAL 3D to ON for audio output in the setup mode and you select the audio source in a 5.1 channel Dolby Digital surround format, the audio will be muted.

- 13 -

EN

0C28

CONNECTING TO A DOLBY DIGITAL DECODER

OR DTS DECODER (for DVD)

If using this TV/DVD to play back a TV/DVD in a 5.1 channel Dolby Digital surround or DTS surround format, the TV/DVD outputs a Dolby Digital or DTS data stream from its COAXIAL digital audio out jack. By hooking the player up to a Dolby Digital or DTS decoder, you can enjoy a more convincing, realistic ambience with powerful and high-qualitysurround sound of a professional standard such as can be heard in movie theaters.

Use audio coaxial digital cables (commercially available) for the audio connections.

DIGITAL AUDIO OUT

 

ANT.

(PCM/BITSTREAM)

AUDIO OUT

COAXIAL

R

L

Center

 

 

speaker

Front speaker

 

Front speaker

 

(left)

(right)

 

 

 

To COAXIAL DIGITAL

 

 

AUDIO OUT jack

Dolby Digital

 

(only DVD AUDIO OUT)

 

 

or DTS decoder

 

To COAXIAL DIGITAL

 

 

AUDIO INPUT jack

Surround

Surround

Subwoofer

speaker

speaker

 

(left)

(right)

 

[Fig. 11]

NOTES:

Be sure to turn off the power to all components in the system before connecting another component.

Refer to the Owner's Manuals for the components to be connected to the TV/DVD.

If connected to a Dolby Digital decoder, set DOLBY DIGITAL to ON for audio output in the setup mode.

If connected to a DTS decoder, set DTS to ON for audio output in the setup mode.

Unless connected to a Dolby Digital decoder or a DTS decoder, set DOLBY DIGITAL and DTS to OFF for audio output in the setup mode. Playing a TV/DVD using incorrect settings may generate noise distortion, and may also damage the speakers.

When DOLBY DIGITAL is set to OFF and VIRTUAL 3D to ON for audio output in the setup mode and you select the audio source in a 5.1 channel Dolby Digital surround format, the audio will be muted.

Manufactured under license from Dolby Laboratories. “Dolby” and the double-Dsymbol are trademarks of Dolby Laboratories. Confidential Unpublished Works.©1992-1997 Dolby Laboratories, Inc. All rights reserved.

“DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.

- 14 -

EN

0C28

PICTURE CHANNEL SET
LANGUAGE [ENGLISH] ESPAÑ OL FRANÇ AIS
V-CHIP SET UP
CAPTION [OFF]
TV SECTION
PICTURE
CHANNEL SET LANGUAGE [ENGLISH]
ESPAÑ OL
FRANÇ AIS V-CHIP SET UP CAPTION [OFF]
ADD/DELETE
AUTO MEMO

SET UP FOR USE

Getting started

1

Connect the power cord to a standard AC outlet. NOTE: If some digits appear in the corner of the screen, press the POWER button without unplugging the power cord.

2

Press the Arrow K orL button to point to "CHANNEL SET". Then,

press the Arrow B button.

2

Press the POWER button to turn on the TV/DVD.

3

Press the SELECT button on the remote control until channel number or "TV" appears on the screen. Then press the TV button.

LANGUAGE SELECTION

If you want to change the language of the on-screenmenu, follow the procedure below.

1

PICTURE

Press the MENU button so that the

CHANNEL SET

LANGUAGE [ENGLISH]

menu display appears on the TV

ESPAÑOL

FRANÇAIS

screen.

V-CHIPSET UP

 

CAPTION [OFF]

 

 

2

PICTURE

Press the Arrow K orL button to

CHANNEL SET

LANGUAGE [ENGLISH]

point to "LANGUAGE".

ESPAÑ OL

FRANÇ AIS

 

V-CHIPSET UP

 

CAPTION [OFF]

3

Select "ENGLISH", "ESPAÑOL" = Spanish or "FRANÇAIS" = French by using the Arrow B ors button.

4

Press the MENU button to exit the menu. NOTE: Anon-screendisplay language must be selected each for the TV mode and DVD mode.

CHANNEL PRESETTING

To preset a channel or to change a preset channel, follow the procedure below.

1

Press the MENU button so that the

PICTURE

CHANNEL SET

menu display appears on the TV

LANGUAGE [ENGLISH]

ESPAÑ OL

screen.

FRANÇ AIS

V-CHIPSET UP

 

CAPTION [OFF]

3

Press the Arrow K orL button to point to "AUTO MEMO". Then,

press the Arrow B button.

The tuner scans and memorizes all active channels in your area.

The TV distinguishes between standard TV channels and cable channels.

When AUTO MEMO action is completed, the lowest memorized channel reappears on the screen.

When you press the Arrow K orL button after selecting AUTO MEMO, the tuner will stop at the memorized channels only.

The TV may recognize TV channels to be CATV channels by the receiving conditions. In this case, try AUTO MEMO action again in the fine receiving conditions.

[ADD/DELETE FUNCTION]

1)Press the MENU button so that the menu display appears on the TV screen.

2)Press the Arrow K orL button to point to "CHANNEL SET". Then, press the ArrowB button.

3)Press the Arrow B button so that "ADD/DELETE" is selected.

4)Use the Arrow K orL button to select the channel you wish to put into memory or to erase from memory.

NOTE: The display will return to the screen in about 10 seconds. Perform "ADD/DELETE" function while this display appears on the screen.

Press the ArrowB ors button

 

to light up the channel number in

ADD/DELETE

LIGHT BLUE if you wish to

AUTO MEMO

 

add the channel into memory.

 

Press the Arrow B ors button

to light up the channel number in LIGHT RED if you wish to erase the channel from memory.

5)Press the MENU button to exit the menu.

- 15 -

EN

 

0C28

SLEEP 10

OPERATIONS

WATCHING A TV PROGRAM

1

Select the desired channel with the CH(annel) K orL button.

2

Adjust the volume to the desired listening level using the VOL(ume) K orL button.

3

Adjust picture controls for a natural looking image. (See "PICTURE ADJUSTMENT".)

CLOSED CAPTION

This TV can receive C1 and C2 of Caption and Text.

CAPTION MODE

1)Characters can be displayed on the TV screen when the received broadcast signal contains the Caption Signals.

2)Paint-on mode: Displays input characters on the screen immediately.

Pop-on mode: Once characters are stored in memory, it is displayed all at once.

Roll-up mode: Displays the characters continuously by scrolling (max. 4 lines)

NOTE: If the CAPTION C1 or C2 is selected but the caption signal is not included, characters will not be displayed.

SELECTING THE SLEEP TIMER

The sleep timer function enables you to shut off the power without pressing the POWER button after a desired time period.

1

Press the SLEEP button on the remote control.

2

You may change the sleep time with pressing the SLEEP button on the remote control repeatedly. The timer is set up to 90 minutes, 10

minutes each time the SLEEP button is pushed. (The timer display counts up and sleep timer will be displayed on the screen when you press the SLEEP button on remote control.)

To cancel the sleep timer:

Press the SLEEP button repeatedly until "SLEEP 0" is displayed.

NOTES:

When you disconnect the unit from the AC outlet, or if you have a power failure, the sleep time will be lost.

When the TV mode is changed to the DVD mode, the sleep time will be lost.

TEXT MODE

1)Displays the text on the screen by scrolling (max. 7 lines)

2)If the received broadcast signal does not contain the caption or text signal, no change will occur.

NOTES:

1)When your TV receives a special effects playback signal (i.e., Search, Slow, Still) from a VCR’s video output channel (CH3 or CH4), your TV may not display the correct caption or text.

2)Captions and texts may not match the TV voice exactly.

3)Interference may cause the closed caption system not to function properly.

4)The caption or text characters will not be displayed while the menu display or function’s display is shown.

5)If you see this screen!!

If your TV displays a black box on the screen, this means that your TV is set to TEXT mode. To clear screen, select CAPTION C1, C2 or CAPTION [OFF].

- 16 -

EN

0C28

CLOSED CAPTION SELECTION

You may view specially labeled (cc) TV programs, movies, news, prerecorded tapes, etc. with either a dialogue caption or text display added to the program.

1

Press the MENU button so that the menu display appears on the TV screen.

2

Press the Arrow K orL button to point to "CAPTION".

3

Press the Arrow B ors button to select the mode you wish.

4

When done, press the MENU button to exit the menu.

: Press the ArrowB ors button.

PICTURE

PICTURE

CHANNEL SET

CHANNEL SET

LANGUAGE [ENGLISH]

LANGUAGE [ENGLISH]

ESPAÑ OL

ESPAÑ OL

FRANÇ AIS

FRANÇ AIS

V-CHIPSET UP

V-CHIPSET UP

CAPTION [OFF]

CAPTION [ C1]

 

PICTURE

 

CHANNEL SET

 

LANGUAGE [ENGLISH]

 

ESPAÑ OL

 

FRANÇ AIS

 

V-CHIPSET UP

 

CAPTION [ C2]

PICTURE

PICTURE

CHANNEL SET

CHANNEL SET

LANGUAGE [ENGLISH]

LANGUAGE [ENGLISH]

ESPAÑ OL

ESPAÑ OL

FRANÇ AIS

FRANÇ AIS

V-CHIPSET UP

V-CHIPSET UP

CAPTION [ T2]

CAPTION [ T1]

PICTURE ADJUSTMENT

1

Press the MENU button so that the menu display appears on the TV screen.

GAME MODE

Set to the most suitable position for TV GAME. [B] : ON

[ s] : OFF

BRIGHT

Adjust until the whitest parts of the picture are as bright as you prefer.

[B] : increase brightness [s] : decrease brightness

CONTRAST

Adjust to increase or decrease contrast. [B] : increase contrast

[ s] : decrease contrast

COLOR

Adjust to be brilliant or pale color. [B] : be brilliant color

[ s] : be pale color

TINT

Adjust to obtain natural skin tones. [B] : greenish tone

[ s] : reddish tone

NOTES:

In the above steps, the picture adjustment display will disappear from the TV screen after about 10 seconds unless you press any buttons, even though you may not be finished. Press the MENU and Arrow B button so that "PICTURE" mode is selected. Then, press the ArrowK orL button repeatedly until the display returns to the screen.

If you adjust the other Picture control after you set the Game mode to [ON], the Game mode is set to [OFF] automatically. If you want to set the Game mode, reset it to [ON].

: Press the Arrow orbutton.

[ ]

GAME MODE [ ]

[ ]

BRIGHT

[ ]

OFF

ON

 

 

 

[ ] CONTRAST[ ]

2

Press the Arrow B button so that "PICTURE" mode is selected.

[ ]

TINT

[ ]

[ ]

COLOR

[ ]

3

Select the feature you wish to adjust with the Arrow

K orL button and adjust it with the ArrowB ors button.

- 17 -

EN

0C28

V-CHIPSET UP

V-CHIPenables parents to prevent their children from watching inappropriate material on TV.V-CHIPreads the ratings for programming (except for news and sports programs, unedited movies on premium cable channels, and Emergency Broadcast System signals), then denies access to programming if the program's rating meets the limitations you select. In this case, "PROTECTED PROGRAM by

..." message appears on the TV screen. To block ratings, follow the steps below.

Programming may be rated by the Motion Picture Association of America (MPAA) or according to the Television Parental Guidelines. In order to block any inappropriate programming, set your limits in both places (MPAA RATING and TV RATING).

You cannot access the menu when the "PROTECTED PROGRAM by ..." message appears. In this case, change to the unblocked channel, then press the MENU button.

[MPAA RATING SET UP]

<Selection>

<Rating Category Explanations>

• G:

General Audience

• PG:

Parental Guidance suggested.

PG-13:Unsuitable for children under 13

R: Restricted; under 17 requires

accompanying parent or adult guardian

NC-17:No one under 17 admitted

X: Mature audience only

When you select the rating category and turn it [BLOCK], the higher rating will turn [BLOCK] automatically. Also, the lower rating will turn [VIEW] automatically.

When you turn "G" to [BLOCK] or [VIEW], the all ratings will turn to [BLOCK] or [VIEW] automatically.

When you turn "X" to [VIEW], the all ratings will turn to [VIEW] automatically.

5

Press the MENU button to exit the menu.

[TV RATING SET UP]

1

Press the MENU button so that the menu display appears on the TV screen.

2

Press the Arrow K orL button to

PICTURE

CHANNEL SET

point to "V-CHIPSET UP". Then,

LANGUAGE [ENGLISH]

ESPAÑ OL

press the Arrow B button.

FRANÇ AIS

V-CHIPSET UP

 

CAPTION [OFF]

3

Press the Arrow K orL button to

TV RATING

point to "MPAA RATING". Then,

MPAA RATING

 

press the Arrow B button.

 

1

Press the MENU button so that the menu display appears on the TV screen.

2

PICTURE

Press the Arrow K orL button to

CHANNEL SET

LANGUAGE [ENGLISH]

point to "V-CHIPSET UP". Then,

ESPAÑ OL

press the Arrow B button.

FRANÇ AIS

V-CHIPSET UP

 

CAPTION [OFF]

 

 

3

 

Press the Arrow K orL button to

TV RATING

MPAA RATING

point to "TV RATING". Then,

 

press the Arrow B button.

 

4

Press the Arrow K orL button to point to your desired item.

Then, press the Arrow B button to select [BLOCK] or [VIEW].

G

[VIEW]

PG

[VIEW]

PG-13

[VIEW]

R

[BLOCK]

NC-17

[BLOCK]

X

[BLOCK]

4

Press the Arrow K orL button to point to your desired item. Then, press the ArrowB button to select [BLOCK] or [VIEW].

TV-Y

[VIEW]

TV-Y7(

) [VIEW]

TV-G

[VIEW]

TV-PG(

) [VIEW]

TV-14(

) [VIEW]

TV-MA(

) [VIEW]

- 18 -

EN

0C28

<Selection>

<Rating Category Explanations>

TV-Y:

Appropriate for all children

TV-Y7:

Appropriate for children seven and

 

older

TV-G:

General Audience

TV-PG:

Parental Guidance suggested.

TV-14:

Unsuitable for children under 14

TV-MA:

Mature audience only

When you select the rating category and turn it [BLOCK], the higher rating will turn [BLOCK] automatically. Also, the lower rating will turn [VIEW] automatically.

When you turn "TV-Y"to [BLOCK] or [VIEW], the all ratings will turn to [BLOCK] or [VIEW] automatically.

When you turn "TV-MA"to [VIEW], the all ratings will turn to [VIEW] automatically.

When you select TV-Y7,TV-PG,TV-14,orTV-MAand you press the ArrowB button, thesub-ratingswill appear on the TV screen.

If you select the rating category (example: TV-PG)and turn it [BLOCK] or [VIEW], thesub-ratings(example: V for Violence) will turn [BLOCK] or [VIEW] automatically.

You can set the sub-ratingsto [BLOCK] or [VIEW] individually when the rating category is set to [BLOCK]. To set thesub-ratingsindividually, follow the steps below.

When you select [TV-Y7]:

Press the Arrow K orL button to select "FV" (Fantasy Violence). Then, press the ArrowB button to select [BLOCK] or [VIEW].

When you select [TV-PG],[TV-14]or[TV-MA]:

TV-Y7

FV

TV-PG

D

L

S

V

[BLOCK]

[BLOCK]

[BLOCK]

[BLOCK]

[BLOCK]

[BLOCK]

[BLOCK]

Press the Arrow K orL button

to select "D"(Suggestive

TV-Y

[VIEW]

TV-Y7(

) [VIEW]

Dialog), "L"(Coarse Language),

TV-G

[BLOCK]

TV-PG(DLSV) [BLOCK]

"S"(Sexual Situation), or

TV-14(DLSV)[BLOCK]

"V"(Violence). Then, press the

TV-MA( LSV)[BLOCK]

 

 

Arrow B button to select [BLOCK] or [VIEW].NOTE: When you select[TV-MA],"D" does not appear on the TV screen.

The sub-ratingswhich set to [BLOCK] appears next to the rating category in the TV RATING menu.

5

Press the MENU button to exit the menu.

- 19 -

EN

0C28

DVD SECTION

ABOUT THE DISCS

PLAYABLE DISCS

The following discs can be played back on this TV/DVD.

Disc Type

Logo

Contents

Disc Size

Maximum

Playback Time

 

 

 

 

 

 

 

 

 

 

 

 

 

Approx. 4 h

 

 

 

12 cm

(single-sided)

 

 

 

Approx. 8 h

 

 

Sound

 

DVD

 

 

(double-sided)

 

and

 

Video

 

 

Approx. 80 min

 

Pictures

 

 

 

 

(single-sided)

 

 

 

8 cm

 

 

 

Approx. 160 min

 

 

 

 

 

 

 

 

(double-sided)

Audio

 

 

12 cm

74 min

 

Sound

 

 

 

8 cm

 

CD

 

20 min

 

 

 

 

 

(singles)

 

 

 

 

 

 

 

 

 

This player conforms to the NTSC color system. You cannot play discs recorded in other color systems such as PAL or SECAM.

Some discs include region codes as shown below.

Photo CD

(Never play back, otherwise malfunction may result.)

Video CD

(Never play back, otherwise malfunction may result.)

Any other discs without compatibility indications

DISC TYPES

[DVD]

Data on a DVD is divided into sections called "titles", and then into subsections called "chapters", each of which is given a title or chapter number. Playback conditions are preset on some DVD video discs, and these playback conditions take priority over user operations on this player. If a function you selected do not run as desired, refer to the manual accompanying the disc.

Example

Title 1

Title 2

Chapter 1 Chapter 2 Chapter 3 Chapter 4

Chapter 1 Chapter 2

The number inside the symbol refers to a region of the world, and a disc encoded in a specific region format can only be played back on TV/DVD with the same region code.

The following discs cannot be played back on this TV/DVD.

DVD with region codes other than 1 or ALL.

DVD-ROM

DVD-R/DVD-RAM

(Never play back, otherwise malfunction may result.)

CD-ROM

VSD

CDV

(Only plays back the audio part.)

CD-G

(Only plays back the sound.)

CD-R

(Never play back, otherwise malfunction may result.)

CD-I

(Never play back, otherwise malfunction may result.)

[AUDIO CD]

Data on an audio CD is divided into sections called "tracks", each of which is given a track number.

Example

Track 1

Track 2

Track 3

Track 4

Track 5

Track 6

SYMBOLS USED IN THIS MANUAL

The following symbols appear below some headings and in some notes in this manual, with the following meanings.

DVD :

Description refers to playback of DVD video discs.

CD :

Description refers to playback of audio CDs.

- 20 -

EN

0C28

PLAYING A DISC

Getting started

1

Turn on the power of amplifier and any other components which are connected to the TV/DVD. (Change the input system to suit the TV/DVD, and check that the sound volume is correct.)

2Press the POWER button.

The power will turn on.

3Press the SELECT button on the remote control until "DVD" appears on the screen.

Then press the DVD button.

PLAYING A DVD VIDEO

OR AN AUDIO CD

DVD CD

1Press the OPEN/CLOSE button.

The disc loading tray will open.

2Place a disc into the tray.

Make sure the disc is sitting properly in the correct recess, with the label side up.

3Press the PLAY button.

The tray will close automatically, and playback will then start from the first chapter or track of the disc. You need to press the PLAY button only when the tray has been closed by pressing the OPEN/CLOSE button.

When you play back the DVD which a title menu is recorded, the menu may appear on the screen. In this case, refer to "USING THE TITLE MENU".

4Press the STOP button to stop play.

NOTES:

A "prohibited icon" may appear at the bottom right on the TV screen during operation, warning

that a prohibited operation has been encountered by the TV/DVD or the disc.

If a disc is dirty or has scratches, the pictures may appear distorted and the playback operation may stop. In such cases, clean the disc and unplug the power cord and then plug it again before resuming playback.

With DVDs that use some titles for playback program signals, playback may start from the second title, or it may skip these titles.

The DVD functions are active only in the DVD mode.

To run the DVD player, press the PLAY or OPEN/CLOSE button.

USING THE DVD MENUS

DVD

Some DVDs contain their own menus, such as a guidance menu which describes the contents of the disc or a selection menu for sound, language and other customized settings.

1Press the MENU button.

The DVD menu will appear.

2Select the desired title.

Press the Arrow buttons (L/K/B/s) to change the setting, and then press the ENTER button.

3Playback will start from the selected title.

- 21 -

EN

0C28

USING THE TITLE MENU

DVD

With a DVD containing a title menu, you can select desired titles from the menu.

1Press the TITLE button.

The title menu will appear.

2Select the desired title.

Press the Arrow buttons (L/K/B/s) to change the setting, and then press the ENTER button.

CALLING UP A MENU SCREEN DURING PLAYBACK

For DVDs

Press the MENU button to call up the DVD menu.

Press the TITLE button to call up the title menu.

NOTE:

Contents of menus and corresponding menu operations may vary between discs. Refer to the manual accompanying the disc for details.

PAUSING PLAYBACK OR DISPLAYING A STILL PICTURE

DVD CD

1 Press the PAUSE button during playback.

Playback will pause, with sound

PAUSE

muted.

 

2 Press the PLAY button to resume playback.

PLAY

RESUMING PLAYBACK FROM

THE POINT WHERE

PLAYBACK STOPPED

DVD

1Press the STOP button during playback.

Playback will stop, and "STOP"

MEMO ON

will appear at the top-rightof the screen and then "MEMO ON" at thetop-left.

2Press the PLAY button. Playback will start from the point where the previous playback session was stopped.

PLAY

NOTES:

The resume function can be reset by pressing the STOP button twice or by opening the disc loading tray.

The resume function is not available with audio CDs.

STEPPING THROUGH FRAMES

DVD

1Press the PAUSE button while playback is paused.

PAUSE

The next picture frame is displayed with sound muted each time the button is pressed.

2 Press the PLAY button to resume playback.

PLAY

- 22 -

EN

0C28

FAST FORWARD/REVERSE

DVD CD

1Press the FWD g or REVh button during playback. (The sound for DVD is muted.)

For DVDs, pressing the FWD g or REVh button cycles the playback speed in three steps.

For audio CDs, the playback speed is fixed.

REV E Button

FWD D Button

Ex2

Dx2

Ex8

Dx8

Ex32

Dx32

2Press the PLAY button to return to normal playback speed.

SLOW MOTION

DVD

1Press the FWD g button while playback is paused. (Sound remains muted.)

Slow motion mode will be activated.

Pressing the FWD g button cycles the playback speed in three steps. Select an appropriate speed while referring to the speed indication on the screen.

FWD DButton

1/16

1/8

1/2

2Press the PLAY button to return to normal playback speed.

NOTES:

Slow playback is not available with audio CDs.

The reverse of slow playback is not available.

STARTING FROM A DESIRED

TRACK

CD

1Press the number buttons to enter the desired track number.

The selected track will be located, and playback will start.

You can also press the SEARCH MODE button, use the number or K/L buttons to enter the track number,

and then press the PLAY button.

SEARCH/TRACK

Pressing the SEARCH MODE but-

ton during playback causes the cur-

TOTAL TRACKS: 07

TRACK [

6 ]

rent track number to be displayed in

 

 

square brackets.

Start

Exit

TRICKS WITH THE SKIP BUTTONS (H,G)

If the SKIP button G is pressed during playback or while playback is paused, the current track is skipped and the next track is played. When the SKIP buttonH is pressed once, the top of the current track is located for replaying. When the SKIP buttonH is pressed again while playback is paused, the previous track is located. Each time the SKIP buttonH is pressed while playback is paused, the disc is searched backward track by track. Once playback has started, pressing the SKIP buttonH locates the top of the current track.

STARTING FROM A DESIRED

TIME COUNT

 

DVD

 

CD

 

 

1 Press the SEARCH MODE

SEARCH/TIME

button.

TOTAL TIME 1h23m45s

Press the button three times for

TIME [ _h__m__s ]

DVDs or two times for audio

 

 

 

CDs.

Start

 

Exit

2Press the number buttons to set the desired time count.

Example: 1 hour, 23 minutes and

SEARCH/TIME

 

TOTAL TIME: 1h23m45s

30 seconds

TIME [1h23m30s]

 

1+10+103

 

 

+10+10+100

Start

Exit

To enter 0 (zero), press the num-

ber 0 (zero) button or press the B button.

3Press the PLAY button. Playback will then start from the set time count.

NOTES:

Playback from a desired time count is not available with some discs.

Specific time playback is not available with some discs or if the unit is in stop mode.

- 23 -

EN

0C28

PLAYING FROM A DESIRED

TITLE OR CHAPTER

DVD

Press the number buttons to enter the desired chapter number during playback. The selected chapter will be located within the current title and then played back.

Title search starts when any number button is pressed during stop mode.

You can also press the SEARCH MODE button, use the number or K/L buttons to enter the chapter number, and then press the PLAY button.

For title search, call up the chapter search screen, press the SEARCH MODE button, and then operate in the same manner as above.

Pressing the SEARCH MODE button during playback causes the current chapter or title number to be displayed in square brackets.

NOTE:

SEARCH/CHAPTER

TOTAL CHAPTERS: 027

CHAPTER [ 15 ]

StartExit

SEARCH/TITLE

TOTAL TITLES: 07

TITLE [ 5 ]

StartExit

Playback from a desired title or chapter is not available with some DVDs.

RANDOM (Audio CD)

CD

1Press the MODE button in stop mode.

The program setting menu screen will appear.

2Press the MODE button again.

RANDOM

StartExit

3Press the PLAY button. Random playback will then start.

NOTE:

Program playback is not available during random playback.

REPEAT

DVD CD

1 Press the REPEAT button.

For DVDs

A single title or chapter is played back repeatedly.

Pressing the REPEAT button cycles the display on the screen as follows.

REPEAT

The current chapter is

[CHAPTER]

 

played back repeatedly.

REPEAT

The current title is

[TITLE]

played back repeatedly.

 

REPEAT

No repeat playback.

[OFF]

 

If normal playback is performed after REPEAT CHAPTER has been selected without any chapter number entered, the first chapter is played back repeatedly. If the chapter number is changed using the number buttons or the SKIP buttons (H G) during playback, the newly selected chapter is played back repeatedly.

For audio CDs

The whole disc or a single track is played back repeatedly.

Pressing the REPEAT button cycles the display on the screen through REPEAT TRACK, REPEAT ALL andREPEAT OFF.

REPEAT

The current track is

[TRACK]

 

played back repeatedly.

REPEAT

The whole disc is

[ALL]

played back repeatedly.

 

REPEAT

No repeat playback.

[OFF]

 

If normal playback is performed after REPEAT TRACK has been selected without any track number entered, the first track will be played back repeatedly. If the track number is changed using the number buttons or the SKIP buttons (H G) during playback, the newly selected track is played back repeatedly.

If the REPEAT button is pressed during program playback, that program is played back repeatedly.

NOTE:

Repeat playback is not available with some discs

- 24 -

EN

0C28

PROGRAM
NOTES:

A-BREPEAT

DVD CD

You can define a section to be played back repeatedly.

1Press the A-BREPEAT button during playback.

The starting point (A) will then

REPEAT

[ A - ]

 

 

be selected.

 

2Press the A-BREPEAT button again at the end point (B) of the desired section.

The selected section will be

REPEAT

played back repeatedly.

[ A - B ]

 

 

3To exit A-Brepeat playback, press theA-BREPEAT button and set it to OFF.

REPEAT [ OFF ]

NOTES:

If B is selected at a point which is earlier than point A, the previous setting of A is canceled and the point selected as B will become the setting for A.

With DVDs, the A-Brepeat section can be set only within the current title.

With audio CDs, the A-Brepeat section can be set across different tracks.

A-Brepeat is not available with some scenes in DVD.

PROGRAM (Audio CD)

 

 

 

CD

 

 

 

 

 

1 Press the MODE button in stop mode.

The program screen will appear.

PROGRAM

 

T [ __] / 18 TOTAL 0h 00m 00s

 

 

Start,

Delete Exit

2Press the number or K/L buttons to enter the desired track numbers, and then press the ENTER button to select the settings.

The total playback time for the

T [12_ ] / 14

TOTAL 0h 27m 46s

 

 

PROGRAM

 

 

selected tracks will appear on the

 

 

 

 

02: 04

12: 14

 

 

 

01: 02

11: 12

 

 

TOTAL line.

03: 06

13: 10

 

 

05: 01

14: 11

 

 

 

04: 09

 

 

 

06: 03

 

 

 

 

07: 05

 

 

 

 

08: 07

 

 

 

 

09: 13

 

 

 

 

10: 08

 

 

 

 

Start,

Delete

Exit

3Press the PLAY button.

Playback will start in the programmed order.

The contents of the program are retained after the program playback ends.

Addition or confirmation of programs is not possible during program playback. You must stop the current playback before such operations can be carried out.

Press the CLEAR button to cancel a program. The most recently entered program will then be deleted.

Up to 20 programs can be stored at any time.

T [__] / 14 TOTAL 0h 27m 46s

01: 09

11: 01

 

02: 03

12: 14

 

03: 04

13: 10

 

04: 07

14: 11

 

05: 01

 

 

06: 02

 

 

07: 12

 

 

08: 10

 

 

09: 13

 

 

10: 08

 

 

Start,

Delete

Exit

Numbers which exceed the number of tracks on the disc in the tray are not accepted.

Playback from a desired track and random playback are not available during program playback.

Program settings are cleared when the power is turned off or the disc loading tray is opened.

- 25 -

EN

0C28

SETTINGS

CHANGING THE AUDIO LANGUAGE OR SOUND MODE

DVD CD

The TV/DVD has a function which allows you to select the desired audio language and sound mode.

For DVDs

Press the AUDIO button during playback, and then press the K/L buttons to select the desired audio language.

The audio language can be changed if multiple languages are recorded on the DVD being played.

AUDIO 1 : E N G / 8

AUDIO 2 : F R E / 8

AUDIO 8 : J P N / 8

NOTES:

Pressing the K/L buttons may not work on some DVDs with multiple audio languages (e.g. DVDs which allow audio language setting on the disc menu). Operation varies between discs, so refer to the manual accompanying the disc.

If a desired language is not shown after pressing the K/L buttons several times, the disc does not have an audio source in that language.

The audio language resets to the one which has been selected in the setup mode, every time the power is turned on or discs are replaced. If that language is not available on a disc, a language defined by the disc is selected.

The screen display will disappear after about 15 seconds.

If you use DIGITAL AUDIO OUT jack, the sound mode of audio CDs can not be changed.

HELLO

Bon jour

For audio CDs

Press the AUDIO button during playback.

Pressing the K/L buttons cycles the sound mode through STEREO,L-CHandR-CH.

AUDIO S T E R E O

AUDIO

R - C H

AUDIO

L - C H

Both right and left channels are active (stereo).

Only the right channel is active.

Only the left channel is active.

- 26 -

EN

0C28

CHANGING THE SUBTITLE

LANGUAGE

DVD

The TV/DVD has a function which allows you to select the desired language for subtitles.

Press the SUBTITLE button during playback, and then press the K/L buttons to select the desired subtitle language.

The subtitle language can be changed if the subtitles are recorded in multiple languages on the DVD being played.

The subtitle language cannot be changed if the subtitles are recorded in a single language on the DVD being played.

SUBTITLE

1 : E N G

/ 8

Subtitle 1

SUBTITLE

2

: F R E

/ 8

Subtitle 2

SUBTITLE

0

: O F F

/ 8

No subtitles

HELLO

Bon jour

Pressing the K/L buttons cycles the subtitle language from SUBTITLE 1, SUBTITLE 2 and all the languages recorded through to OFF.

NOTES:

Some discs allow subtitle language setting on the disc menu. (Operation varies between discs, so refer to the manual accompanying the disc.)

If the desired language is not shown after pressing the K/L buttons several times, the disc does not have subtitles in that language.

The subtitle language resets to the one which has been selected in the setup mode, every time the power is turned on or discs are replaced. If that language is not available on a disc, a language defined by the disc is selected.

It may take time to display the subtitles in the selected language.

The screen display will disappear after about 15 seconds.

CHANGING THE CAMERA

ANGLE (Multi-AnglePictures)

DVD

The TV/DVD has a function which allows you to select the desired camera angle.

1Press the ANGLE button during playback.

If the disc contains sequences recorded from different camera angles, the angle icon ( ) will appear at thebottom-rightof the screen. You can change the camera angle when the icon appears on the screen.

The camera angle cannot be changed if the disc does not contain sequences recorded from different camera angles.

2Press the K/L buttons while the angle number is shown on the screen.

ANGLE [ 1 ] / 8

Angle 1 (default)

ANGLE [ 2 ] / 8

Angle 2

ANGLE [ 8 ] / 8

Angle 8

NOTE:

The screen display will disappear after about 15 seconds.

- 27 -

EN

0C28

CHANGING THE ON-SCREEN

DISPLAY

DVD CD

You can check the information about the disc by pressing the DISPLAY button on the remote control.

For DVDs

Press the DISPLAY button.

Pressing the DISPLAY button cycles the display on the screen.

TITLE

: 01/04

TIME

0h10m25s

REMAIN

0h05m25s

CHAPTER

: 001/010

TIME

0h02m25s

REMAIN

0h01m31s

AUDIO

: 1.ENGLISH

 

DOLBY DIGITAL

 

6CH

SUBTITLE

: 2.FRENCH

ANGLE

: 8/8

VIRTUAL 3D

 

Current title number / total number of titles.

Elapsed time of the current title.

Remaining time of the current title.

Current chapter number / total number of chapters in the current title.

Elapsed time of the current chapter.

Remaining time of the current chapter.

Current language for the sound.

Current audio format.

Current language for the subtitles.

Selected angle / total number of angles.

VIRTUAL 3D setting(ON/OFF).

No display

NOTE:

DOLBY DIGITAL 5.1 Channel is displayed as "DOLBY DIGITAL 6CH".

For audio CDs

Press the DISPLAY button.

Pressing the DISPLAY button toggles the display on the screen.

TRACK

: 01/04

TIME

0h05m25s

REMAIN

0h01m31s

PROGRAM

Current track number / total track number.

Elapsed time of the current track.

Remaining time of the current track.

Current play mode.

No display

- 28 -

EN

0C28

CHANGING THE SETUP ITEMS

DVD

LANGUAGE SETTINGS

1 Press the SETUP button.

The setup screen appears.

SETUP

 

 

2. VIDEO

 

 

 

1. LANGUAGE

 

 

 

3. AUDIO

 

 

 

4. LOCK

 

 

 

5. OTHERS

 

 

 

Enter

/

Exit

2Press the K/L or number buttons to select

LANGUAGE, and then press the ENTER button.

SETUP/LANGUAGE

1. AUDIO

[ENG]

2. SUBTITLE

[AUTO]

3. DISC MENU

[ENG]

4. PLAYER MENU

[ENG]

Enter,BackExit

3Press the K/L or number buttons to select an item, and then press the ENTER button.

SETUP/LANGUAGE

AUDIO

1.ORIGINAL

2.ENGLISH

3. SPANISH

4.FRENCH

5.OTHER

Enter,BackExit

SETUP/LANGUAGE

SUBTITLE

1.AUTO

2.ENGLISH

3. SPANISH

4.FRENCH

5.OTHER

Enter,BackExit

SETUP/LANGUAGE

DISC MENU

1.AUTO

2.ENGLISH

3. SPANISH

4. FRENCH

5. OTHER

Enter,BackExit

SETUP/LANGUAGE

PLAYER MENU

1. ENGLISH

2.SPANISH

3.FRENCH

Enter,BackExit

The original language of each disc will be selected.

Voice is played back in English.

Voice is played back in Spanish.

Voice is played back in French.

You can select other languages for audio playback.

Subtitles are shown in the automatically selected language.

Subtitles are shown in English.

Subtitles are shown in Spanish.

Subtitles are shown in French.

You can select other languages for subtitles.

The disc menu is shown in the automatically selected language.

The disc menu appears in English.

The disc menu appears in Spanish.

The disc menu appears in French.

You can select other languages for the disc menu.

The on-screendisplay appears in English.

The on-screendisplay appears in Spanish.

The on-screendisplay appears in French.

4Press the K/L or number buttons to select a desired item, and then press the ENTER button.

If OTHER is selected on the AUDIO, SUBTITLE or DISC MENU setting screen, the COUNTRY CODE setting screen will appear. Press the number buttons to enter the desired language (country) code while referring to the list on page 33, and then press the ENTER button.

SETUP/LANGUAGE

COUNTRY CODE

[ _ _ _ _ ]

Enter,BackExit

5Press the SETUP button.

The setup mode will be canceled and the ordinary screen will appear.

NOTES:

If the automatically selected language in "AUTO" for subtitle is same as the selected language for "AUDIO", the subtitle will not be shown.

If the number buttons are used in steps 2 to 4, the settings are immediately selected. (You do not need to press the ENTER button.)

Language Setting for AUDIO and SUBTITLE is not available with some discs. Then use the AUDIO and SUBTITLE button. Details are on pages 26 and 27.

An on-screendisplay language must be selected each for the TV mode and DVD mode.

- 29 -

EN

0C28

VIDEO SETTINGS

1 Press the SETUP button.

The setup screen will appear.

SETUP

 

 

1. LANGUAGE

 

 

 

2. VIDEO

 

 

 

3. AUDIO

 

 

 

4. LOCK

 

 

 

5. OTHERS

 

 

 

Enter

/

Exit

2Press the K/L or number buttons to select

VIDEO, and then press the ENTER button.

SETUP/VIDEO

1. TV MODE

[4:3LB]

2. STILL MODE

[AUTO]

Enter,BackExit

3Press the K/L or number buttons to select an item, and then press the ENTER button.

SETUP/VIDEO

TV MODE

1. 4:3 PAN&SCAN

2. 4:3 LETTER BOX

3. 16:9 WIDE

Enter,BackExit

SETUP/VIDEO

STILL MODE

1. AUTO

2.FIELD

3.FRAME

Enter,BackExit

Full-heightpictures are shown with one or both sides trimmed.

Wide screen (full-width)pictures are shown with black bars at top and bottom.

If a wide screen TV is connected.

AUTO is normally selected.

If pictures are blurred in auto mode.

For showing motionless pictures at high resolution in still mode.

4Press the K/L or number buttons to select the desired item, and then press the ENTER button.

5Press the SETUP button.

The setup mode will be canceled and the ordinary screen will appear.

NOTE:

If the number buttons are used in steps 2 to 4, the settings are immediately selected. (You do not need to press the ENTER button.)

AUDIO SETTINGS

1 Press the SETUP button.

SETUP

 

The setup screen will appear.

1. LANGUAGE

 

2. VIDEO

 

3. AUDIO

 

 

4. LOCK

 

 

5. OTHERS

 

 

Enter

/ Exit

2Press the K/L or number buttons to select

AUDIO, and then press the

ENTER button.

SETUP/AUDIO

 

1. DIGITAL OUT

 

 

 

 

 

 

2. VIRTUAL 3D

[OFF]

 

 

Enter,

Back

Exit

3Press the K/L or number buttons to select an item, and then press the ENTER button.

SETUP/AUDIO

DIGITAL OUT

1.

PCM

[48kHz]

2.

DOLBY DIGITAL [OFF]

3.

DTS

[OFF]

Enter,BackExit

SETUP/AUDIO

VIRTUAL 3D

1.OFF

2.ON

Sets the sample rate for playing a disc recorded with high sound quality.

When a Dolby Digital decoder is connected.

When a DTS decoder is connected.

To activate the 3D effect.

Enter,BackExit

4Press the K/L or number buttons to select the desired item, and then press the ENTER button.

If PCM, DOLBY DIGITAL or DTS is selected on the DIGITAL OUT setting screen, press the K/L or number buttons again to select a further item, and then press the ENTER button.

SETUP/AUDIO

PCM

1.48kHz

2.96kHz

Enter,BackExit

Audio signals are converted to 48 kHz/16 bit signals for digital output when playing a DVD recorded with high sound quality (48 kHz/

20 bit/24 bit, 96 kHz).

Sound is reproduced at the high quality of

96 kHz when playing a DVD recorded with high sound quality (48 kHz/20 bit/24 bit, 96 kHz). For 48 kHz discs or when 4:3 LETTER BOX

is selected in TV MODE, sound is reproduced at 48 kHz.

SETUP/AUDIO

DOLBY DIGITAL

1.OFF

2.ON

Enter,BackExit

SETUP/AUDIO

DTS

1.OFF

2.ON

When a Dolby Digital decoder built-inamplifier is used.

When a DTS decoder built-inamplifier is used.

Enter,BackExit

- 30 -

EN

0C28

SETUP/LOCK
PARENTAL LOCK

5Press the SETUP button.

The setup mode will be canceled and the ordinary screen will appear.

NOTE:

If the number buttons are used in steps 2 to 4, the settings are immediately selected. (You do not need to press the ENTER button.)

This unit employs TruSurround system

of SRS Labs, Inc. as the VIRTUAL 3D technology.

TruSurround and the symbol are trademarks of SRS Labs, Inc. in the United States and selected foreign countries.

TruSurround technology is incorporated under license from SRS Labs, Inc.

PARENTAL LOCK

1 Press the SETUP button.

SETUP

 

The setup screen will appear.

1. LANGUAGE

 

2. VIDEO

 

3. AUDIO

 

 

4. LOCK

 

 

5. OTHERS

 

 

Enter

/ Exit

2Press the K/L or number buttons to select

LOCK, and then press the ENTER button.

SETUP/LOCK

PASSWORD [ _ _ _ _ ]

1. LEVEL

[LEVEL8]

 

 

 

To set the control level to 1 to 8 or none.

 

 

 

 

2. CHANGE PASSWORD

 

 

To cancel the current password and set a

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

new one on the same screen.

Enter,

Back

 

 

 

3Press the number buttons to enter the 4-digitpassword, and then press the ENTER button.

When doing this for the first time, enter any 4 digits. That number will be used as the password from the second time onward.

By entering the password, you

SETUP/LOCK

PASSWORD

[ _ _ _ _ ]

 

can then change the control level

1. LEVEL

[LEVEL8]

 

and password settings.

2. CHANGE PASSWORD

 

 

 

 

 

Enter,

Back

4Press the K/L or number buttons to select an item, and then press the ENTER button.

When LEVEL is selected

Press the K/L buttons to select an item from LEVEL 1 to LEVEL 8 or NONE, and then press

the ENTER button.

NONE

LEVEL 8 [PLAY ALL]

LEVEL 7 [NC-17]

LEVEL 6 [R]

LEVEL 5

LEVEL 4 [PG-13]

LEVEL 3 [PG]

LEVEL 2

LEVEL 1 [G]

Enter

When CHANGE PASSWORD is selected

The password entry screen will be displayed and the password which has already been set will be cleared. The four digits entered in step 3 will then be set as the new password.

5

The setup screen will appear.

- 31 -

EN

0C28

CONTROL LEVELS

Level 8

DVD software of any grade (adult/general/children) can be played back.

Level 7 to 2

Only DVD software intended for general use and children can be played back.

Level 1

Only DVD software intended for children can be played back, with those intended for adult and general use prohibited.

None

Parental lock is canceled.

NOTES:

With some DVDs, it may be difficult to find if they are compatible with parental lock. Be sure to check if the parental lock function operates in the way that you have set.

If the number buttons are used in steps 2 to 4, the settings are immediately selected. (You do not need to press the ENTER button.)

Record the password in case you forget it.

[Cannot remember your password?]

Reset the setup items and enter the new password by the following step:

When the TV/DVD do not run in the DVD mode, and while pressing and holding the STOP button on the TV/DVD, press the CHANNEL K button on the TV/DVD.

OTHER SETTINGS

1 Press the SETUP button.

SETUP

 

The setup screen will appear.

1. LANGUAGE

 

2. VIDEO

 

3. AUDIO

 

 

4. LOCK

 

 

5. OTHERS

 

 

Enter

/ Exit

2Press the K/L or number buttons to select

OTHERS, and then press the

ENTER button.

SETUP/OTHERS

 

 

 

 

1. OSD MESSAGE [ON]

 

 

2. ANGLE ICON

[ON]

 

 

3. BACKGROUND [BLUE]

 

 

Enter,

Back

Exit

3Press the K/L or number buttons to select an item, and then press the ENTER button.

SETUP/OTHERS

OSD MESSAGE

1.ON

2.OFF

Enter,BackExit

SETUP/OTHERS

ANGLE ICON

1.ON

2.OFF

Enter,BackExit

SETUP/OTHERS

BACKGROUND

1.BLUE

2.GRAY

Selects whether to display messages on the screen.

Selects whether to display the angle icon.

Turns the background to blue.

Turns the background to gray.

Enter,BackExit

4Press the K/L or number buttons to select a desired item, and then press the ENTER button.

5Press the SETUP button.

The setup mode will be canceled and the ordinary screen will appear.

NOTE:

If the number buttons are used in steps 2 to 4, the settings are immediately selected. (You do not need to press the ENTER button.)

- 32 -

EN

0C28

LANGUAGE CODE LIST

DVD

No.

Language

Country code

No.

Language

Country code

1

Afar

4 7 4 7

 

 

69

Latvian;Lettish

5 8 6 8

2

Abkhazian

4 7 4 8

 

 

70

Malagasy

5 9 5 3

3

Afrikaans

4 7 5 2

 

 

71

Maori

5 9 5 5

4

Amharic

4 7 5 9

 

 

72

Macedonian

5 9 5 7

5

Arabic

4 7 6 4

 

 

73

Malayalam

5 9 5 8

6

Assamese

4 7 6 5

 

 

74

Mongolian

5 9 6 0

7

Aymara

4 7 7 1

 

 

75

Moldavian

5 9 6 1

8

Azerbaijani

4 7 7 2

 

 

76

Marathi

5 9 6 4

9

Bashkir

4 8 4 7

 

 

77

Malay

5 9 6 5

10

Byelorussian

4 8 5 1

 

 

78

Maltese

5 9 6 6

11

Bulgarian

4 8 5 3

 

 

79

Burmese

5 9 7 1

12

Bihari

4 8 5 4

 

 

80

Nauru

6 0 4 7

13

Bislama

4 8 5 5

 

 

81

Nepali

6 0 5 1

14

Bengali;Bangla

4 8 6 0

 

 

82

Dutch (DUT)

6 0 5 8

15

Tibetan

4 8 6 1

 

 

83

Norwegian

6 0 6 1

16

Breton

4 8 6 4

 

 

84

Occitan

6 1 4 9

17

Catalan

4 9 4 7

 

 

85

(Afan)Oromo

6 1 5 9

18

Corsican

4 9 6 1

 

 

86

Oriya

6 1 6 4

19

Czech

4 9 6 5

 

 

87

Panjabi

6 2 4 7

20

Welsh

4 9 7 1

 

 

88

Polish

6 2 5 8

21

Danish

5 0 4 7

 

 

89

Pashto;Pushto

6 2 6 5

22

German (GER)

5 0 5 1

 

 

90

Portuguese

6 2 6 6

23

Bhutani

5 0 7 2

 

 

91

Quechua

6 3 6 7

24

Greek

5 1 5 8

 

 

92

Rhaeto-Romance

6 4 5 9

25

English (ENG)

5 1 6 0

 

 

93

Kirundi

6 4 6 0

26

Esperanto

5 1 6 1

 

 

94

Romanian

6 4 6 1

27

Spanish (SPA)

5 1 6 5

 

 

95

Russian

6 4 6 7

28

Estonian

5 1 6 6

 

 

96

Kinyarwanda

6 4 6 9

29

Basque

5 1 6 7

 

 

97

Sanskrit

6 5 4 7

30

Persian

5 2 4 7

 

 

98

Sindhi

6 5 5 0

31

Finnish

5 2 5 5

 

 

99

Sangho

6 5 5 3

32

Fiji

5 2 5 6

 

 

100

Serbo-Croatian

6 5 5 4

33

Faroese

5 2 6 1

 

 

101

Singhalese

6 5 5 5

34

French (FRE)

5 2 6 4

 

 

102

Slovak

6 5 5 7

35

Frisian

5 2 7 1

 

 

103

Slovenian

6 5 5 8

36

Irish

5 3 4 7

 

 

104

Samoan

6 5 5 9

37

Scots Gaelic

5 3 5 0

 

 

105

Shona

6 5 6 0

38

Galician

5 3 5 8

 

 

106

Somali

6 5 6 1

39

Guarani

5 3 6 0

 

 

107

Albanian

6 5 6 3

40

Gujarati

5 3 6 7

 

 

108

Serbian

6 5 6 4

41

Hausa

5 4 4 7

 

 

109

Siswat

6 5 6 5

42

Hindi

5 4 5 5

 

 

110

Sesotho

6 5 6 6

43

Croatian

5 4 6 4

 

 

111

Sundanese

6 5 6 7

44

Hungarian

5 4 6 7

 

 

112

Swedish

6 5 6 8

45

Armenian

5 4 7 1

 

 

113

Swahili

6 5 6 9

46

Interlingua

5 5 4 7

 

 

114

Tamil

6 6 4 7

47

Interlingue

5 5 5 1

 

 

115

Telugu

6 6 5 2

48

Inupiak

5 5 5 7

 

 

116

Tajik

6 6 5 3

49

Indonesian

5 5 6 0

 

 

117

Thai

6 6 5 4

50

Icelandic

5 5 6 5

 

 

118

Tigrinya

6 6 5 5

51

Italian (ITA)

5 5 6 6

 

 

119

Turkmen

6 6 5 7

52

Hebrew

5 5 6 9

 

 

120

Tagalog

6 6 5 8

53

Japanese (JPN)

5 6 4 7

 

 

121

Setswana

6 6 6 0

54

Yiddish

5 6 5 5

 

 

122

Tonga

6 6 6 1

55

Javanese

5 6 6 9

 

 

123

Turkish

6 6 6 4

56

Georgian

5 7 4 7

 

 

124

Tsonga

6 6 6 5

57

Kazakh

5 7 5 7

 

 

125

Tatar

6 6 6 6

58

Greenlandic

5 7 5 8

 

 

126

Twi

6 6 6 9

59

Cambodian

5 7 5 9

 

 

127

Ukrainian

6 7 5 7

60

Kannada

5 7 6 0

 

 

128

Urdu

6 7 6 4

61

Korean (KOR)

5 7 6 1

 

 

129

Uzbek

6 7 7 2

62

Kashmiri

5 7 6 5

 

 

130

Vietnamese

6 8 5 5

63

Kurdish

5 7 6 7

 

 

131

Volapuk

6 8 6 1

64

Kirghiz

5 7 7 1

 

 

132

Wolof

6 9 6 1

65

Latin

5 8 4 7

 

 

133

Xhosa

7 0 5 4

66

Lingala

5 8 6 0

 

 

134

Yoruba

7 1 6 1

67

Laothian

5 8 6 1

 

 

135

Chinese (CHI)

7 2 5 4

68

Lithuanian

5 8 6 6

 

 

136

Zulu

7 2 6 7

 

 

- 33 -

 

 

EN

0C28

TROUBLESHOOTING GUIDE

TV

Sometimes a performance problem can be easily solved by checking seemingly apparent but often overlooked possibilities. Before arranging for service, check these items. It could save your time and money.

Problem

Corrective Action

Remote Control Doesn’t Work

Is TV/DVD plugged in?

 

Power at outlet?

 

Check batteries in Remote Control.

Bars On Screen

If outside antenna is being used, check for broken wire.

 

Check for local interference.

Picture Distorted or Blurred

Try a new channel, if OK, then possible station trouble.

 

If outside antenna is being used, check for broken wire.

Picture Rolls Vertically

Try a new channel, if OK, then possible station trouble.

Lines or Streaks in Picture

If outside antenna is being used, check for broken wire.

 

Check for local interference.

No Color

Try a new channel, if OK, then possible station trouble.

 

Is antenna connected to terminal on the back of the set?

 

If outside antenna is being used, check for broken wire.

 

Adjust COLOR control.

Poor Reception on Some Channels

Try a new channel, if OK, then possible station trouble.

Ghosts in Picture

Is antenna connected to terminal on the back of the set?

 

If outside antenna is being used, check for broken wire.

 

Check for local interference.

Weak Picture

Try a new channel, if OK, then possible station trouble.

 

Is antenna connected to terminal on the back of the set?

 

If outside antenna is being used, check for broken wire.

 

Adjust CONTRAST & BRIGHT control.

Sound OK, Picture Poor

Try a new channel, if OK, then possible station trouble.

 

Is antenna connected to terminal on the back of the set?

 

If outside antenna is being used, check for broken wire.

 

Check for local interference.

 

Adjust CONTRAST & BRIGHT control.

Picture OK, Sound Poor

Try a new channel, if OK, then possible station trouble.

 

Check for local interference.

No Picture or Sound

Try a new channel, if OK, then possible station trouble.

 

Is TV/DVD plugged in?

 

Power at outlet?

 

Is TV/DVD’S POWER button on?

 

Is antenna connected to terminal on the back of the set?

 

If outside antenna is being used, check for broken wire.

 

Turn off with POWER button and then turn it on after about a minute.

- 34 -

EN

0C28

Closed Caption Problem

Possible Remedy

 

 

My TV is showing captions

• You are watching a live broadcast and spelling errors made by the

that are misspelled.

closed captioning production company may pass through uncorrected.

 

A prerecorded program will not show any misspelled words because

 

of the normal time available for editing the captions.

 

 

My TV will not show the text

• Captions that are delayed a few seconds behind the actual dialogue

in its entirety or there is a delay of

are common for live broadcast. Most captioning production companies

what is being said.

can display a dialogue to a maximum of 220 words per minute. If a

 

dialogue exceeds that rate, selective editing is used to insure that the

 

captions remainup-to-datewith the current TV screen dialogue.

 

 

My captions are scrambled with

• Interference caused by building, power lines, thunderstorms, etc.

white boxes on the TV screen.

may cause scrambled or incomplete captions to appear.

 

 

My program guide listed a TV show

• Broadcasters may at times use a time compression process to the

as being closed captioned but none

actual program so that additional advertising time can be given.

of the captions were displayed.

Since the decoder cannot read the compressed information,

 

captions will be lost.

My TV screen shows a black box

• You are in the TEXT mode. Select CAPTION mode or CAPTION

on certain channels.

[OFF].

 

 

- 35 -

EN

0C28

DVD

If the TV/DVD does not perform properly when operated as instructed in this Owner’s Manual, check the player, consulting the following checklist.

Symptom

Cause

Remedy

No power.

Loose power plug.

Insert the power plug firmly into the wall outlet.

The player does not

The remote control is not aimed

Aim the remote control directly at the sensor on

respond to the

at the sensor on the TV/DVD.

the TV/DVD.

remote control.

Obstacles present between the

Remove the obstacles from the signal path.

 

remote control and the sensor.

Use the remote control within 7m of

 

The remote control is too far

 

away from the TV/DVD.

the TV/DVD.

 

Dead batteries.

Replace the batteries.

No picture

Loose video connection.

Connect the video cables firmly.

 

Wrong disc.

Insert a correct video disc that plays on this

 

 

TV/DVD.

Disc cannot be

No disc.

Insert a disc.

played

Dirty disc.

Clean the disc.

 

Disc is placed upside down.

Place the disc correctly, with the label side up.

 

Parental lock is active.

Cancel the parental lock or change the control

 

 

level.

No sound

Loose audio connection.

Connect the audio cables firmly.

 

The power of the connected

Turn the power of the audio component on.

 

audio component is off.

Correct the audio output settings.

 

Wrong audio output settings.

 

Wrong input settings on the

Correct the input settings on the audio

 

connected audio component.

component.

Distorted picture

Immediately after playing,

There are some cases where pictures may be

 

press fast forward or in reverse.

slightly distorted, which are not a sign of a

 

 

malfunction.

Audio or subtitle

The selected language is not

No malfunction.

language does not

available for audio or subtitles

 

match the setup.

on the DVD.

 

The camera angle

The DVD does not contain

No malfunction.

cannot be changed.

sequences recorded from

 

 

different camera angles.

 

Audio or subtitle

The DVD does not contain

No malfunction.

language cannot be

audio source or subtitles in the

 

changed.

selected language.

 

"Prohibited icon"

That operation is prohibited by

No malfunction.

appears on the

the TV/DVD or disc.

 

screen, prohibiting

 

 

an operation.

 

 

 

 

 

NOTES:

Some functions are not available in specific modes, but this is not a malfunction. Read the description in this Owner’s Manual for details on correct operations.

Playback from a desired track and random playback are not available during program playback.

- 36 -

EN

0C28

MAINTENANCE

CABINET CLEANING

Wipe the front panel and other exterior surfaces of the TV/DVD with a soft cloth immersed in lukewarm water and wrung dry.

Never use a solvent or alcohol. Do not spray insecticide liquid near the TV/DVD. Such chemicals may cause damage and discoloration to the exposed surfaces.

SERVICING

Should your TV/DVD become inoperative, do not try to correct the problem by yourself. There are no user-serviceableparts inside. Turn off, unplug the power cord, and please call our help line at1-800-968-3429,to locate an Authorized Service Center.

IF THE LASER OPTICAL PICKUP UNIT IS DIRTY

If the player still does not perform properly when it is operated while referring to the relevant sections and to "TROUBLESHOOTING GUIDE" in this Owner's Manual, the laser optical pickup unit may be dirty. Consult your dealer or an Authorized Service Center for inspection and cleaning of the laser optical pickup unit.

DISC HANDLING

Use discs which have the following logos on them. (Optical audio digital discs.)

Handle the discs so that fingerprints and dust do not adhere to the surfaces of the discs.

To clean-off,use a soft cloth.

Do not use a hard cloth since this will mar the disc.

Wipe the disc in a straight line from center to edge.

Never wipe with a circular motion.

Do not use detergent or abrasive cleaning agents.

Always store the disc in its protective case when it is not used.

- 37 -

EN

0C28

SPECIFICATIONS

GENERAL SPECIFICATIONS

TV

Television system:

NTSC-M

 

TV Standard

Closed caption system: §15.119/FCC

Channel coverage:

 

VHF:

2 ~ 13

UHF:

14 ~ 69

CATV:

2 ~13, A ~ W,

 

W+1 ~ W+84,

 

A-5~A-1,5A

Tuning System:

181 channel

 

frequency synthesized

 

tuning system

Channel access:

Direct access keyboard,

 

programmable

 

scan and up/down

DVD

Product type:

DVD Player

Discs:

DVD video, Audio CD

Output signal format:

NTSC color

Frequency response

 

(out put jack)

 

DVD (linear sound):

20 Hz to 22 kHz

 

(sample rate: 48 kHz)

 

20 Hz to 44 kHz

 

(sample rate: 96 kHz)

CD:

20 Hz to 20 kHz

Signal-to-noiseratio

 

(S/N ratio)(out put jack)

CD:

100 dB (EIAJ)

Dynamic range

 

(out put jack)

 

DVD (linear sound):

85 dB

CD:

84 dB (EIAJ)

Total distortion factor

 

CD:

0.07% (EIAJ)

Wow and flutter:

Below the measurement

 

limitation (+/-0.001%

 

W PEAK) (EIAJ)

ELECTRICAL SPECIFICATIONS

Sound output: 2 speakers, 1W, 8 ohm

OTHER SPECIFICATIONS

Terminals

 

Antenna input:

VHF/UHF/CATV

 

75 ohm unbalanced (F-type)

Video input:

RCA connector [ 1

Audio L/R input:

RCA connector [ 2

Headphone:

1/8” stereo (3.5 mm)

Coaxial digital

 

audio output

 

(only DVD):

One pin jack,

Analog audio L/R

500m Vpp (75 ohm)

 

output (only DVD):

RCA connector [ 2

Remote control:

Digital encoded

Operating

infrared light system

 

temperature:

5ºC to 40ºC

 

(41ºF~104ºF)

Power requirements:

AC 120V, 60Hz

Power consumption

 

(Maximum):

75W

Picture tube:

13"

Dimensions:

H:15-13/16"(402mm)

 

W:15-3/16"(386mm)

 

D:14-13/16"(376mm)

Weight:

25.4 lbs (11.5kg)

Accessories:

Remote Control Unit with

 

2"AA"batteries

 

Rod Antenna

 

Owner’s Manual

Designs and specifications are subject to change without notice and without our legal obligation.

If there is a discrepancy between languages, the default language will be English.

- 38 -

EN

0C28

CONTROLES DE OPERACIÓN Y

SUS FUNCIONES

Consulte las figuras 1-3de las páginas 8 y 9.

Para utilizarlo como mando a distancia del televisor, pulse el botón TV del mando a distancia después de seleccionar el modo del televisor. Los botones de control del televisor se indican en color azul o blanco.

Para utilizarlo como mando a distancia del reproductor DVD, pulse el botón DVD del mando a distancia después de seleccionar el modo del reproductor DVD. Los botones de control del reproductor DVD se indican en color amarillo o blanco.

1.Bandeja de carga del disco

2.Toma de entrada de vídeo (VIDEO)– Se conecta a la toma de salida de vídeo de una videocámara o videograbadora.

3.Tomas de entrada de audio izquierda/derecha (AUDIO L/R)–

Se conectan a las tomas de salida de audio de una videocámara o videograbadora.

4.Botón de alimentación (POWER)– Púlselo para conectar y desconectar la alimentación.

5.Botones de volumen (VOLUME K/L)–Púlselos para controlar el nivel del sonido del reproductor DVD y del televisor.

6.Botones de canales (CHANNEL K/L)–Púlselos para seleccionar los canales memorizados.

7.Ventanilla receptora de señales del mando a distancia

8.Botón de parada (STOP)– Detiene el disco.

9.Botón de rebobinado (REV)– Activa la reproducción en retroceso rápido hasta un punto deseado.

10.Botón de reproducción (PLAY)– Inicia la reproducción del contenido del disco.

11.Botón de avance (FWD)– Activa la reproducción en avance rápido hasta un punto deseado.

12.Botón de pausa (PAUSE)– Hace una pausa en el disco actual.

13.Botón de abrir/cerrar (OPEN/CLOSE)– Púlselo para introducir un disco en la bandeja o para sacarlo de ella.

14.Toma de auriculares (HEADPHONE)– Para conectar unos auriculares (no suministrados) y escuchar en privado.

15.Botón del televisor (TV)– Púlselo para controlar el televisor.

16.Botón numerados (NUMBER)– Modo del televisor:

Pulse dos dígitos para acceder directamente al canal deseado. No se olvide de pulsar "0" antes de introducir un canal de un solo dígito.

Botón +100–

Púlselo para seleccionar canales de televisión por cable con un número igual o superior al 100.

Modo del reproductor DVD:

Púlselo para introducir el número deseado.

Botón +10–

Púlselo para introducir números iguales o superiores al 10.

17.Botón del temporizador para dormir (SLEEP)– Pulse el botón SLEEP para visualizar el temporizador para dormir y activar la función. La hora de apagado puede determinarse mediante el número de veces que usted pulse el botón (0, 10, 20, 30, ... 90, 0 minutos).

18.Botones de salto (SKIP)– Para saltar capítulo o pistas hasta un punto deseado.

19.Botón de modo (MODE)– Activa el modo de reproducción de programas o de reproducción aleatoria.

20.Botón de preparación (SETUP)– Púlselo para introducir el modo de preparación o para cambiar ítems de preparación.

21.Botón de título (TITLE)– Visualiza el menú de títulos.

22.Botón de cancelar (CLEAR)– Cancela un ajuste.

23.Botón del visualizador (DISPLAY)– Modo del televisor:

Púlselo para visualizar el número del canal en la pantalla. Si lo presiona de nuevo, el número del canal desaparecerá.

Modo del reproductor DVD:

Visualiza el estado actual en la pantalla del televisor con fines de comprobación.

24.Botón de modo búsqueda (SEARCH MODE)– Púlselo para localizar el punto deseado.

25.Botón de audio (AUDIO)– Púlselo para seleccionar el modo de sonido o idioma de audio deseado.

26.Botón de subtítulo (SUBTITLE)– Púlselo para seleccionar un idioma de subtítulos deseado.

27.Botón de repetición (REPEAT)– Repita la reproducción del disco, título, capítulo o pista actual.

28.Botón de ángulo (ANGLE)– Púlselo para cambiar el ángulo de la cámara y ver la escena reproduciéndose desde un ángulo diferente.

29.Botón de repetición A-B(A-BREPEAT)–Repite la reproducción de una sección seleccionada.

30.Botón de retorno (RETURN)– Se utiliza para volver a la operación anterior.

31.Botón de aceptación (ENTER)– Púlselo para aceptar un ajuste.

32.Botones de flechas– Modo del televisor:

Púlselo para seleccionar un modo de ajuste en los menús que aparecen en la pantalla del televisor.

Púlselo para seleccionar o ajustar desde un menú particular.

Modo del reproductor DVD:

Se utiliza para hacer ajustes mientras se observa la visualización en la pantalla del televisor.

33.Botón de menú (MENU)– Visualiza los menús del reproductor DVD y del televisor.

34.Botón de selección (SELECT)– Púlselo para cambiar al modo del televisor, al modo de entrada exterior o al modo del reproductor DVD.

35.Botón de silenciamiento (MUTE)– Púlselo para apagar el sonido de un programa de televisión. (La visualización del nivel del sonido cambia de AZUL CLARO a ROJO CLARO.) Pulse de nuevo este botón o pulse el botón VOL K o L para reponer el sonido.

36.Botón DVD– Púlselo para controlar el reproductor DVD.

37.Cable de alimentación– Conéctelo a una toma de CA estándar (120 V/60 Hz).

NOTA: Retire el cable de alimentación del gancho para impedir que se rompa algún hilo conductor antes de conectar el cable a una toma de CA.

38.Toma de salida de audio digital COAXIAL– Conéctela a otro amplificador o descodificador.

39.Toma de salida de audio izquierda/derecha (AUDIO L/R)–

Conéctela a otro amplificador o descodificador.

40.Toma de entrada de antena (ANT.)– Conéctela a una antena, sistema de televisión por cable o sistema de televisión por satélite.

PREPARACIÓN PARA LA UTILIZACIÓN

CONEXIONES DE ANTENA/TELEVISIÓN POR CABLE

ANTENA COMBINADA DE VHF/UHF

La antena de varilla de VHF/UHF (suministrada) puede desmontarse. Inserte el vástago de la antena en el agujero de la parte superior trasera del televisor/reproductor DVD. Conecte la antena de varilla de VHF/UHF o la antena combinada de VHF/UHF en el terminal ANT. del televisor/reproductor DVD como se muestra en el diagrama de abajo. Para obtener la mejor recepción, extienda completamente la antena de varilla de VHF/UHF y haga los ajustes necesarios. (Evite tocar la sección superior cuando haga el ajuste.)

- 39 -

ES

0C28

NOTA: Antes de conectar la antena de varilla en el terminal de antena, compruebe que la clavija no esté doblada. Si lo está, enderécela como se muestra en la ilustración, y luego conecte la clavija en el terminal de la antena.

Clavija doblada

Cable

Clavija

 

(Necesita ser enderezada)

(Clavija derecha)

Consulte la figura 4 de la página 10.

NOTA: La conexión de una antena interior tal vez no ofrezca siempre una recepción de televisión aceptable.

ANTENAS SEPARADAS DE VHF/UHF

En algunas zonas será necesario utilizar una antena exterior.

Consulte la figura 5 de la página 10.

TELEVISIÓN POR CABLE SIN CAJA DE CONVERSIÓN/DESCODIFICADOR

Utilice esta conexión si su sistema de televisión por cable se conecta directamente a su televisor/reproductor DVD sin caja de conversión.

Consulte la figura 6 de la página 11.

TELEVISIÓN POR CABLE CON CAJA DE CONVERSIÓN/DESCODIFICADOR O CAJA DE TELEVISIÓN POR SATÉLITE

Si sus servicio de televisión por cable le suministra una caja de conversión, o si usted utiliza un sistema de televisión por satélite, usted podrá utilizar la conexión básica mostrada aquí.

Consulte la figura 7 de la página 11.

Aviso a los instaladores de sistemas CATV:

Este aviso se incluye para que los instaladores de sistemas CATV tenga en cuenta el Artículo 820-40del NEC, que proporciona consejos para hacer una conexión apropiada a tierra y, en particular, especifica que el cable de tierra deberá conectarse a un sistema de puesta a tierra del edificio tan cerca del punto de entrada del cable como sea posible.

Consulte la figura 8 de la página 12.

CONEXIÓN A UN SISTEMA ESTÉREO

(Para DVD)

Consulte la figura 9 de la página 13.

NOTAS:

Asegúrese de desconectar la alimentación de todos los componentes del sistema antes de hacer conexiones a otro componente.

Consulte también los manuales de instrucciones del sistema estéreo y de otros componentes que vayan a ser conectados al televisor/reproductor DVD.

CONEXIÓN A UN AMPLIFICADOR EQUIPADO CON TOMAS DE ENTRADA DIGITAL, PLATINA MD O PLATINA DAT (Para DVD)

Utilice cables de audio digital coaxial (de venta en el comercio) para hacer las conexiones de audio.

Consulte la figura 10 de la página 13.

NOTAS:

La fuente de audio de un disco del formato de sonido ambiental Dolby Digital de 5,1 canales no puede grabarse como sonido digital por una platina MD o DAT.

Asegúrese de desconectar la alimentación de todos los componentes del sistema antes de hacer conexiones a otro componente.

Consulte también los manuales de los componentes que vayan a ser conectados al televisor/reproductor DVD.

En el modo de preparación, ponga DOLBY DIGITAL y DTS en APDO. para la salida de audio. Hacer la reproducción en un televisor/reproductor DVD utilizando ajustes incorrectos puede generar ruidos, y también puede estropear los altavoces.

Cuando ponga DOLBY DIGITAL en APDO. y 3D VIRTUAL en ENC. para la salida de audio en el modo de preparación y seleccione la fuente de audio en un formato de sonido ambiental Dolby Digital de 5,1 canales, el audio se silenciará.

INSTALACIÓN DE LAS PILAS

 

CONEXIÓN A UN DESCODIFICADOR

 

 

 

 

 

DOLBY DIGITAL O A UN DESCODIFI-

 

1) Abra la cubierta del compartimiento de las pilas presionando la

 

 

CADOR DTS (Para DVD)

 

cubierta del mando a distancia en el sentido de la flecha.

 

 

2) Inserte 2 pilas "AA" en el compartimiento de las pilas, en el

 

Si utiliza este televisor/reproductor DVD para reproducir en el for-

sentido indicado por las

 

mato de sonido ambiental Dolby Digital de 5,1 canales o en el for-

marcas de polaridad (+/-).

 

 

 

mato de sonido ambiental DTS, el televisor/reproductor DVD dará

3) Vuelva a poner la cubierta.

 

 

 

salida al flujo de datos Dolby Digital o DTS desde su toma de sali-

 

 

 

 

 

 

da de audio digital COAXIAL. Conectando el reproductor a un

 

 

 

 

 

descodificador Dolby Digital o DTS, usted podrá disfrutar de un

CONEXIÓN A TOMAS DE ENTRADA

 

ambiente más convincente y real, con un sonido ambiental potente

 

y de alta calidad de tipo profesional como el que puede oírse en

EXTERIOR

 

los cines.

 

Cuando vea un programa grabado en otra fuente (videograbadora o

 

Utilice los cables digitales coaxiales de audio (de venta en el com-

 

ercio) para hacer las conexiones de audio.

 

videocámara), utilice las tomas de entrada de audio/vídeo de la

 

 

 

 

 

parte delantera del televisor/reproductor DVD.

 

Consulte la figura 11 de la página 14.

 

Conecte las tomas de salida de audio/vídeo de otra fuente a las

 

 

 

 

NOTAS:

 

tomas AUDIO L/R y VIDEO de este televisor/reproductor DVD.

 

 

Y luego pulse el botón SELECT hasta que aparezca "AUX" en la

 

Asegúrese de desconectar la alimentación de todos los compo-

pantalla.

 

nentes del sistema antes de hacer conexiones a otro compo-

 

NOTA:

 

nente.

 

Cuando conecte una videograbadora mono (otra fuente) a este

 

Consulte también los manuales de los componentes que vayan a

televisor/reproductor DVD, conecte la toma de salida de audio

 

ser conectados al televisor/reproductor DVD.

 

de la videograbadora mono (otra fuente) a la toma AUDIO L de

 

Si hace la conexión a un descodificador Dolby Digital, en el

 

este televisor/reproductor DVD. El audio saldrá por los canales

 

modo de preparación, ponga DOLBY DIGITAL en ENC. para

L y R de la misma forma.

 

la salida de audio.

 

 

 

 

 

Si hace la conexión a un descodificador DTS, en el modo de

 

- 40 -

ES

0C28

preparación, ponga DTS en ENC. para la salida de audio.

A menos que haga la conexión a un descodificador Dolby Digital o a un descodificador DTS, en el modo de preparación, ponga DOLBY DIGITAL y DTS en APDO. para la salida de audio. Hacer la reproducción en un televisor/reproductor DVD utilizando ajustes incorrectos puede generar ruidos, y también puede estropear los altavoces.

Cuando ponga DOLBY DIGITAL en APDO. y 3D VIRTUAL en ENC. para la salida de audio en el modo de preparación y seleccione la fuente de audio en un formato de sonido ambiental Dolby Digital de 5,1 canales, el audio se silenciará.

Fabricado bajo licencia de Dolby Laboratories. “Dolby” y el símbolo con una doble D son marcas registradas de Dolby Laboratories. Trabajos confidenciales no publicados. ©1992-1997 por Dolby Laboratories. Todos los derechos quedan reservados.

“DTS” y “DTS Digital Out” son marcas comerciales de Digital Theater Systems, Inc.

SECCIÓN DEL TELEVISOR

PREPARACIÓN PARA LA UTILIZACIÓN

Para empezar

1)Conecte el cable de alimentación a una toma de CA estándar. NOTA: Si aparecen algunos dígitos en la esquina de la pantalla, pulse el botón POWER sin desconectar el cable de alimentación.

2)Pulse el botón POWER para encender el televisor/reproductor DVD.

3)Pulse el botón SELECT del mando a distancia hasta que el número del canal o "TV" aparezca en la pantalla.

Luego pulse el botón TV.

SELECCIÓN DE IDIOMA

Si desea cambiar el idioma del menú en pantalla, siga el procedimiento siguiente.

1)Pulse el botón MENU para que la visualización del menú aparezca en la pantalla del televisor.

2)Pulse el botón de flecha K oL para apuntar a "LANGUAGE".

3)Seleccione "ENGLISH" = inglés, "ESPAÑOL" o FRANÇAIS = francés utilizando el botón de flecha B os.

4)Pulse el botón MENU para salir del menú.

NOTA: El idioma de la visualización en pantalla deberá seleccionase para el modo del televisor y el modo de DVD.

PREAJUSTE DE CANALES

Para preajustar un canal o cambiar un canal preajustado, siga el procedimiento siguiente.

1)Pulse el botón MENU para que la visualización del menú desaparezca de la pantalla del televisor.

2)Pulse el botón de flecha K oL para apuntar a "CANAL PREP.". Y luego pulse el botón de flechaB.

3)Pulse el botón de flecha K oL para apuntar a "AUTOPRESELEC.". Luego, pulse el botón de flechaB.

El sintonizador explora y memoriza todos los canales activos en su área.

El televisor distingue entre los canales de televisión estándar y los canales de televisión por cable.

Cuando termine la acción de AUTOPRESELEC., el canal memorizado más baja volverá a aparecer en la pantalla.

Cuando pulse el botón de flecha K oL después de seleccionar AUTOPRESELEC., el sintonizador se detendrá en los canales memorizados solamente.

El televisor puede reconocer si los canales de televisión son CATV por las condiciones de la recepción. En este caso, intente de nuevo la acción de AUTOPRESELEC. en condiciones de recepción fina.

[FUNCIÓN DE AGREGAR/BORRAR]

1)Pulse el botón MENU para que la visualización del menú aparezca en la pantalla del televisor.

2)Pulse el botón de flecha K oL para apuntar a "CANAL PREP.". Y luego pulse el botón de flechaB.

3)Pulse el botón de flecha B para seleccionar "AGREGAR/BORRAR".

4)Utilice el botón de flecha K oL para seleccionar el canal que desee memorizar o borrar de la memoria.

NOTA: La visualización volverá a la pantalla en unos 10 segundos. Realice la función de "AGREGAR/BORRAR" mientras aparece la visualización en la pantalla.

Pulse el botón de flecha B os para encender el número del canal en AZUL CLARO si desea agregar el canal a la memoria.

Pulse el botón de flecha B os para encender el número del canal en ROJO CLARO si desea borrar el canal de la memoria.

5) Pulse el botón MENU para salir del menú.

SECCIÓN DEL REPR ODUCTOR DVD

REPRODUCCIÓN DE UN DISCO

Para empezar

1)Conecte la alimentación del amplificador o de cualquier otro componente que esté conectado al televisor/reproductor DVD. (Cambie el sistema de entrada para que se adapte al televisor/reproductor DVD, y compruebe que el volumen del sonido sea el correcto.)

2)Pulse el botón POWER.

La alimentación se conectará.

3)Pulse el botón SELECT del mando a distancia hasta que "DVD" aparezca en la pantalla. Luego pulse el botón DVD.

REPRODUCCIÓN DE UN DVD VIDEO O UN CD DE AUDIO

DVD CD

1)Pulse el botón OPEN/CLOSE.

La bandeja del disco se abrirá.

2)Ponga un disco en la bandeja.

Asegúrese de que el disco esté bien colocado en la bandeja, con la cara de la etiqueta hacia arriba.

3) Pulse el botón PLAY.

La bandeja se cerrará automáticamente, y la reproducción empezará desde el primer capítulo o la primera pista del disco. Usted necesitará pulsar PLAY sólo cuando la bandeja haya sido cerrada pulsando el botón OPEN/CLOSE.

Cuando reproduzca un DVD que tenga grabado un menú de títulos, el menú podrá aparecer en la pantalla. En este caso, consulte "UTILIZACIÓN DEL MENÚ DE TÍTULOS".

4) Pulse el botón STOP para detener la reproducción.

NOTAS:

Durante la operación puede aparecer un "icono de prohibición" en la parte inferior derecha de la pantalla del televisor, avisándole que el televisor/reproductor DVD o el disco han encontrado una operación prohibida.

Si un disco está sucio o tiene rayas, las imágenes pueden aparecer distorsionadas y la operación de reproducción tal vez se detenga. En tales casos, limpie el disco y desenchufe el cable de alimentación, y luego vuelva a conectarlo antes de reanudar la reproducción.

Con DVDs que utilicen algunos títulos para reproducir señales de programas, la reproducción tal vez empiece desde el segundo título, o puede que omita estos títulos.

Las funciones relacionadas con el DVD se activan sólo en el modo DVD.

Para poner en funcionamiento el reproductor DVD, pulse el botón PLAY u OPEN/CLOSE.

- 41 -

ES

0C28

UTILIZACIÓN DE LOS MENÚS DE DVD

DVD

Algunos DVDs tienen sus propios menús como, por ejemplo, un menú guía que describe el contenido del disco o un menú de selección para seleccionar el sonido, el idioma y otros ajustes personalizados.

1)Pulse el botón MENU.

El menú DVD aparecerá.

2)Seleccione el título deseado.

Pulse los botones de las flechas (K/L/B/s) para cambiar el ajuste, y luego pulse el botón ENTER.

3) La reproducción empezará desde el título seleccionado.

UTILIZACIÓN DEL MENÚ DE TÍTULOS

DVD

Con un DVD que tenga un menú de títulos, usted podrá seleccionar los títulos deseados en el menú.

1) Pulse el botón TITLE.

El menú de títulos aparecerá. 2) Seleccione el título deseado.

Pulse los botones de las flechas (K/L/B/s) para cambiar el ajuste, y luego pulse el botón ENTER.

RECUPERACIÓN DE UNA PANTALLA DE MENÚS

DURANTE LA REPRODUCCIÓN

Para DVDs

Pulse el botón MENU para recuperar el menú del DVD.

Pulse el botón TITLE para recuperar el menú de títulos.

NOTA:

El contenido de los menús y las operaciones con menús correspondientes pueden cambiar según los discos, Consulte el manual entregado con el disco para conocer detalles.

- 42 -

ES

0C28

MEMO

- 43 -

ES

0C28

LIMITED WARRANTY

FUNAI CORP. will repair this SYLVANIA product, free of charge in the USA in the event of defect in materials or workmanship as follows:

DURATION:

PARTS: FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year from the date of original retail purchase. Two (2) years for Picture Tube. Certain parts are excluded from this warranty.

LABOR: FUNAI CORP. will provide the labor without charge for a period of ninety (90) days from the date of original retail purchase.

LIMITS AND EXCLUSIONS:

This warranty is extended only to the original retail purchaser. A purchase receipt or other proof of original retail purchase will be required together with the product to obtain service under this warranty.

This warranty shall not be extended to any other person or transferee.

This warranty is void and of no effect if any serial numbers on the product are altered, replaced, defaced, missing or if service was attempted by an unauthorized service center. This FUNAI CORPORATION Limited warranty does not apply to any product not purchased and used in the United States.

This warranty only covers failures due to defects in material or workmanship which occurs during normal use. It does not cover damage which occurs in shipment, or failures which are caused by repairs, alterations or product not supplied by FUNAI CORP., or damage which results from accident, misuse, abuse, mishandling, misapplication, alteration, faulty installation, improper maintenance, commercial use such as hotel, rental or office use of this product or damage which results from fire, flood, lightning or other acts of God.

THIS WARRANTY DOES NOT COVER PACKING MATERIALS, ANY ACCESSORIES (EXCEPT REMOTE CONTROL), ANY COSMETIC PARTS, COMPLETE ASSEMBLY PARTS, DEMO OR FLOOR MODELS.

FUNAI CORP. AND ITS REPRESENTATIVES OR AGENTS SHALL IN NO EVENT BE LIABLE FOR ANY GENERAL, INDIRECT OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR OCCASIONED BY THE USE OF OR THE INABILITY TO USE THIS PRODUCT. THIS WARRANTY IS MADE IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, AND OF ALL OTHER LIABILITIES ON THE PART OF FUNAI, ALL OTHER WARRANTIES INCLUDING THE WARRANTY OF MERCHANTABILITY, AND FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED BY FUNAI AND ITS REPRESENTATIVES IN THE UNITED STATES.

ALL WARRANTY INSPECTIONS AND REPAIRS MUST BE PERFORMED BY A FUNAI AUTHORIZED SERVICE CENTER. THIS WARRANTY IS VALID WHEN THE UNIT IS CARRIED-INTO FUNAI AUTHORIZED SERVICE FACILITY.

WHEN YOU ARE RETURNING THE PRODUCT FOR SERVICE TO THE FACTORY SERVICE CENTER, PLEASE CONTACT THE FUNAI SERVICE DEPARTMENT TO RECEIVE A R.A. (REPAIR AUTHORIZATION) NUMBER PRIOR TO SHIPPING. ANY POSTAGE, INSURANCE AND SHIPPING COST, INCURRED IN PRESENTING OR SENDING YOUR SYLVANIA PRODUCT FOR SERVICE ARE SHIPPER’S RESPONSIBILITY.

CAREFULLY PACK WITH PROPER PACKING MATERIALS, PREFERABLY IN THE ORIGINAL CARTON AND IF NEEDED DOUBLE BOX IT.

ATTACH WRITTEN DOCUMENTATION DETAILING THE COMPLAINT, TO THE OUTSIDE OR INSIDE OF THE CARTON.

THE PRODUCT MUST BE ACCOMPANIED BY A COPY OF THE ORIGINAL RETAIL PURCHASE RECEIPT. IF NO PROOF OF PURCHASE IS ATTACHED, THE WARRANTY WILL NOT BE HONORED AND REPAIRS COSTS WILL BE CHARGED.

IMPORTANT:

THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, YOU MAY HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE, IF, AT ANY TIME DURING THE WARRANTY PERIOD, YOU ARE UNABLE TO OBTAIN SATISFACTION WITH THE REPAIR OF THIS PRODUCT, PLEASE CONTACT FUNAI CORP.

ATTENTION:

FUNAI CORP. RESERVES THE RIGHT TO MODIFY ANY DESIGN OF THIS PRODUCT WITHOUT PRIOR NOTICE.

To locate your nearest SYLVANIA Authorized Service Center or for general service procedure, please call 1-800-968-3429or write to the following:

 

FUNAI CORPORATION

 

Customer Service

 

100 North Street; Teterboro, NJ 07608

 

Tel :1-800-968-3429

 

 

 

 

Printed in China

0EMN01718

 

TD100UA * * * * *