Fuller 17042 Instruction Manual

Dear Valued Customer,

Congratulations on the purchase of the
Fuller Electrostatic Carpet Sweeper.
We understand that a clean and organized
home is important for a happy, healthy life
for you, your family and friends. At Fuller, we
strive to help you achieve this goal.

This lightweight carpet sweeper is quiet,
easy to use and perfect for quick touch­ups and small jobs. The natural horse hair
bristle rotor brush gathers everything from
dust and ash to paper clips and glass. Use

on carpeted and hard surface oors for fast

and easy cleaning! The vinyl rotor blade is
washable and therefore especially suitable
for picking up sticky material such as

dropped food from kitchen oors.

The vinyl and the bristle rotor are inter­changeable.

Safety Instructions

● Keep this instruction manual for future

use. Should a third party be given the
article, please ensure the instruction
manual is included.

● The article is designed for domestic use

only.

● The article is designed to clean oors.

● This item must only be used for its

intended purpose. No liability will be
accepted for damage resulting from
improper use or non-compliance with
these instructions.

Warning! To avoid danger of suffocation,
keep the plastic bag away from babies
and children. Do not use this bag in
cribs, beds, carriages or play pens. This
bag is not a toy.

Assembly

● Assemble the handle by

screwing the four handle parts
together.

● Screw the end of the

assembled handle to the
sweeper.

● Ensure that all parts are rmly

connected.

Changing or replacing a rotor

● Place the sweeper up-side down on a

rm, even surface. The rotor (brush or

vinyl) is positioned in the middle of the
sweeper.

● Each end of the rotor has a drive wheel

with a knob sticking out at the end.
The sweeper body has a plastic tab
with a metal grommet on each side.
The wheel knobs mount inside these
grommets.

● Pull one of the tabs out, while pushing

the rotor in the opposite direction.

● The knob will come out of the grommet

and you can remove the rotor.

Electrostatic Carpet Sweeper

Instruction Manual

Model No. 17042













P140027_17042_CarpetSweeper_Fuller_A5_2014_03_21_GB_ES.indd 1 21/3/14 11:39 AM

● To install a new rotor, simply place the

knob of one side of the rotor in one of the
grommets. Push the opposite tab out and
lower the second wheel knob into the
grommet of the pushed out tab. Release
the tab and the rotor will snap into place.

Use

● Hold the carpet sweeper with a rm grip.

Assert a little pressure and push back

and forth along the oor.

Cleaning and care

● The carpet sweeper can not be cleaned

with water or in a dishwasher.

● To empty the sweeper,

turn it over and press the

‘PUSH’ markings on the

dust containers to release
the covers.

● Shake out the dirt and push the covers

back into place.

● Clean the bristle brushes with

the comb tool.

● Wipe the vinyl rotor clean before storage.

If the vinyl rotor becomes very soiled,
remove and wash with a mild cleaning
solution and warm water. Let the rotor dry
before reinserting it.

● Do not use any abrasive cleaning agents

or brushes for cleaning. These can
damage the device.

● Store the carpet sweeper in

a dry and clean place with
the comb tool clipped onto
the bottom of the handle
and the bracket of the
sweeper.

Disposal

The packaging material is recyclable. Please
dispose of it in an environmentally friendly
manner and take it to a recycling center.

We reserve the right to modify the product, packaging or enclosed documentation at any time in conjunction with our policy of continuous development.

Customer Service:

The Fuller Brush Company, 860 Kaiser Road, Suite D,
Napa, CA 94558, USA

Toll Free phone number: [phone] & [phone]

Internet email: [e-mail]

P140027_17042_CarpetSweeper_Fuller_A5_2014_03_21_GB_ES.indd 2 21/3/14 11:39 AM