DocuWide 6035/6055
Preface
DocuWide
6035/6055
Features
Copy
Print
Scan
(Via
network)
Scan
(Via USB)
Paper
Jams
Loading
Media
Replaceing
Consumables
Troubleshooting
Preface
Preface
Thank you for selecting the DocuWide 6035/6055 (hereafter referred to as
the "machine").
This guide explains how to operate the machine and the precautions that
must be followed during operation. To get the most out of the machine and
to use it effectively, be sure to read this guide before use.
This guide assumes that an operator has a basic knowledge of the
operating environment of the personal computer in use, networking
environments, and how to operate a personal computer. For information on
the environment of the personal computer in use, basic knowledge of
networking environments, and how to operate a personal computer, refer to
the manuals provided with the personal computer, operating system, and
network system.
Types of Manuals
The following manuals are provided with the machine.
● User Guide
This guide describes all the necessary steps for copy/print/scan,
clearing paper jams, daily care, various settings items and safety
information.
● Quick Guide (This Document)
Introduces the main features of the machine, as well as simple
operating instructions.
● DocuWide 6035/6055 Utilities help
A guide to installing the printer driver, configuring the printer
environment, etc. This help is included in the CD-ROM provided
with the machine.
2
Important
Note
: Indicates additional information on operations or features.
: Indicates cross-references to the content.
Power On / Off
● Powering On
● Powering Off
Exiting the Power Saver Mode
Press the power
switch to
the [ | ] position
Press the power switch
to the < > side.
Power Breaker
Preface
If the power does not come on, check if the
power breaker (main power switch) is switched
to [ | ].
If you do not use the machine for a certain period of time, it enters the Power Saver Mode, and the screen
becomes completely dark. To cancel the Power Saver mode, press the <Power Saver> button.
<When Power Saver Mode is canceled>
Please select the required service.
Menu
Language
Setup Menu
Interrupt
Copy from
Memory
Start
Power Saver
Transmitting
Job in memory
Job Status
Machine Status
Log In/Out
Copy
Scan
Stored
Programming
Copy Scan Menu
Clear All
Stop
Transmitting
Job in memory
Job Status
Machine Status
Log In/Out
<In Power Saver Mode>
Copy from
Copy Scan Menu
Memory
Interrupt
Start
Power Saver
Clear All
Stop
<Power Saver> button
3
DocuWide
6035/6055
Features
DocuWide 6035/6055 Features
● DocuWide 6035/6055 allows you to copy, print, and scan.
Print
Scan
Mailbox
Copy
4
Using the touch panel, you can copy easily at
the same and various other magnifications.
See
User Guide P.49
● Printing from your computer
● Checking the Machine Status and Job Status
You can print from the applications. You can also set
various print settings, such as checking the image size
while printing, to effectively use the DocuWide 6035/
6055. (P.10)
● Network Scanning
You can import and edit the mailbox-stored
documents via TWAIN compatible application
software on your computer. (P.20)
● Direct Scanning (scanning via USB)
This feature allows you to check the
machine status and job status from the
computer via a web browser. (P.15)
You can import and edit the mailbox-store
documents into the specified folder on your
computer, using Wide Format Scan Service. (P.17)
DocuWide
6035/6055
Features
You can scan directly to TWAIN-compliant applications on
your computer connected to the machine via USB, by
using a USB TWAIN driver.
You can adjust the image quality and edit the images of
scanned documents on the screen displayed on your
computer. (P.23)
By using CentreWare Internet Services,
you can retrieve documents in mailboxes,
even without an application. (P.21)
5
Copy
Making a copy the same size as the document
● You can easily copy, simply by loading the document.
Copy
Standard size Document Non-standard size Document
A1 A1
Menu
Media
Select [Copy].
1
More
Features
1 ISOA0
2 ISO A2
Language
Setup Menu
Vellum
Film
Media Cut Mode
Auto R/E
Confirm selecting [100.0%] for
2
[Reduce/Enlarge], and [Auto Select]
for [Media Supply].
Copy
Scan
Stored
Programming
Basic
Copy
Image
Quality
Media SupplyReduce/Enlarge Media Type
100.0% Bond
Auto%
50.0%
-
>
A0
A2
More...
Auto
Select
Bond
Bond
More...
Media
6
Transmitting
Job in memory
Job Status
Machine Status
Log In/Out
Copy Scan Menu
Interrupt
Copy from
Memory
Start
Power Saver
Clear All
Stop
Enter the number of copies (1 to 99)
3
using the numeric keypad.
Set the document in portrait
4
orientation.
Align the document face down with the document guide.
The document will be scanned automatically, and copied.
Note
• The standard size document can be placed in
landscape orientation.
• Press to stop copying.
Stop
Fitting the image to a fixed copy size
● By selecting the desired copy size, you can easily make copies with scaling.
Document
A0
Media
Various sized documents
A0
A1
A1
A4
Media
A4
Menu
Copy
Scan
Stored
Programming
Basic
Copy
Media Supply
Transmitting
Job in memory
Job Status
Machine Status
Log In/Out
Image
Quality
100.0% Bond
Auto%
50.0%
-
A2>
A0
More...
Auto
Select
Standard
Size
Media
Source
Copy Scan Menu
More
Features
Media SupplyReduce/Enlarge Media Type
Auto
Select
1 ISO A0
Bond
2 ISO A2
Bond
More...
Cancel Close
ISO A0
ISO A1
ISO A2
ISO A3
ISO A4
JIS B1
Language
Setup Menu
JIS B2
JIS B3
JIS B4
8.5 x 11"
9 x 12"
11 x 17"
Interrupt
Copy from
Memory
Start
Auto R/E
Vellum
Film
Media Cut Mode
Power Saver
Clear All
Stop
Select [Copy].
1
Select [Auto%] for [Reduce/Enlarge]
2
and select the desired standard size for
[Media Supply].
When the desired standard size is not
listed, select [More].
Note
If you select the [Auto R/E] check box, you can
copy according to setting determined in
advance. Refer to User Guide P.59.
Select the desired standard size for
3
[Standard Size], and select [Close].
Note
Trays can be specified instead of media size.
Refer to User Guide P.58.
Enter the number of copies (1 to 99)
4
using the numeric keypad.
Set the document in portrait orientation.
5
Align the document face down with the document guide.
The document will be scanned automatically, and copied.
Copy
Note
• The standard size document can be placed in
landscape orientation.
Stop
• Press to stop copying.
7
Copying Multiple Documents [Collation]
q
● When copying multiple documents, collated output is available.
[Collated]
[Uncollated]
Copy
Document A,B,C
Menu
Copy
Basic
Copy
Collation
Copy
Quantity : 3
Pages : 1
C. Settings
(Auto R/E)
C. Settings
(Normal)
Image
Scan
Quality
Folder Collation
Off
Stored
Programming
Stamp
Stamp 1: Off
Stamp 2: Off
Sample Copy
Off
Uncollated
Collated
Program
Distrib.
More
Features
Watermark
Multi-job
Cancel
Delete Prev.
Image
Language
Setup Menu
Uncollated
Off
Off
Banner Sheet
Collation Order
Auto R/E
Close
No
Yes
Forward
Reverse
Stop
Last
Original
Document A,B,C
Display the [Collation] screen for
1
Copy.
(1) Select [Copy].
(2) Select the [More Features] tab on the [Copy] screen.
(3) Select [Collation].
1
2
3
Select [Collated], and select [Close].
2
Select the features from each tab as required.
Enter the number of sets using the
3
numeric keypad.
Load the documents.
4
(1) Set the first page of the documents.
(2) Set the next document continuously.
(3) Select [Last Original] after scanning all the documents.
Note
You can change the settings for the documents
on the Copy screen displayed. Refer to User
Guide P.56.
8
Quantity
Confirm the number of copy sets, and
5
press the <Start> button.
Transmitting
Job in memory
Job Status
Machine Status
Log In/Out
-
Copy Scan Menu
Interrupt
Copy from
Memory
Start
Power Saver
Clear All
Stop
Copying starts automatically.
Note
To change the number of copy sets, press the
numerical value entry area, and you also can
enter from the numeric keypad.
Other Copy Functions
Menu
Copy from
Memory
Pow
Reprinting (Copy from Memory)
You can copy additional sets of documents copied
previously even without reloading the documents.
User Guide (P.62)
Interrupt
Copy from
Memory
Start
Power Saver
Clear All
Stop
Transmitting
Job in memory
Job Status
Machine Status
Log In/Out
Copy Scan Menu
Original Type
Selects the suitable image quality for the original type.
Use this feature to scan blueprints, vellum more clearly.
User Guide (P.79)
Background Suppression
Erases the uneven background color of the document.
User Guide (P.80)
Sample Copy
You can copy part of a document as a sample.
User Guide (P.88)
Text/Line
Text/Photo
Blueprint
Uneven-Toned Background
Adjust Color Density
Adjusts the density on a color-by-color basis to enhance
or erase some colors.
User Guide (P.82)
Adjust Color Density
Adjust
Red
Yellow Green Cyan Blue Violet Black
Cancel Close
Edge Erase
Erases the edges of the document image.
This is useful to erase drawing frames.
User Guide (P.93)
Copy
Scan Start Position
Skips the unneeded portion such as a header on the lead
edge of the document.
User Guide (P.93)
Image Location
Shifts the image copy position.
Use this feature when copying characters on the edge of
the document or making punch holes.
User Guide (P.92)
Watermark
Overlays a string for copy protection or output control on
the background of the document.
User Guide (P.87)
Stamp (Optional)
Applies a stamp when copying.
You can specify Black or Gray as the stamp color.
User Guide (P.85)
Fuji Xerox
2008/08/08
Ito
9
Printing Using the Printer Driver
● The Printer Driver must be installed on the computer using the provided CD-ROM.
Select [Print] from the application's
1
[File] menu.
Print
Select [FX DocuWide 6055/6035] from
2
the [Name] menu.
Select the print settings, and click
3
[OK].
Click [Properties] and set the settings such as [Paper
Size] and [Media Type].
Note
Click [Help] to see the explanation for the topic.
Click [OK].
4
Note
To print according to the media size used on
DocuWorks, check [Fit to paper size].
10
Loading...