Fuji Xerox DocuPrint M228 b, DocuPrint M228 db, DocuPrint M228 fb, DocuPrint M228 z, DocuPrint M268 dw Quick Setup Manual
...
DocuPrint M228 b / DocuPrint M228 db / DocuPrint M228 fb /
DocuPrint M228 z / DocuPrint M268 dw / DocuPrint M268 z
ME7183E3-1 (Edition 1)
Copyright © 2014 by Fuji Xerox Co., Ltd.
October 2014
Fuji Xerox Co., Ltd.
Quick Setup Guide
Unpack the machine and check the components
(For DocuPrint M228 fb /
DocuPrint M228 z /
DocuPrint M268 z)
1
Remove the packing materials and install the toner cartridge
A
Drum Unit
(Pre-installed)
B
Inbox Toner
Cartridge
USB Interface Cable Quick Setup Guide CD‑ROM
Telephone Line Cord
(For DocuPrint M228 fb /
DocuPrint M228 z /
DocuPrint M268 z)
Safety Guide Basic User's Guide
Read the Safety Guide first, then read this Quick Setup Guide for the correct installation
procedure.
NOTE:
• The available connection interfaces vary depending on the model.
• The illustrations in this Quick Setup Guide are based on the DocuPrint M268 z.
• The USB cable is a standard accessory.
Network cable
Use a straight-through Category 5 (or greater) twisted-pair cable for 10BASE-T or
100BASE-TX Fast Ethernet Network.
2
Remove the orange part. Remove the orange part.
Load paper in the paper tray
A
Adjust the paper guides.
B
B
A
B
A
3
4
Insert the paper with the print side face-up.
Connect the power cord and turn on the machine
Configure the machine for faxing (for DocuPrint M228 fb / DocuPrint M228 z / DocuPrint M268 z)
If you do not plan to use the fax feature on this machine, go to step 5.
NOTE:
• To complete fax setup on your machine, see the Basic User's Guide.
• Your machine is programmed to automatically receive faxes. To change this default mode, see the Basic User's Guide.
Connect the telephone line cord
5A
Configuration using the CD-ROM (Windows®)
NOTE:
If the Fuji Xerox screen does not appear
automatically, go to Computer.
(For Windows
icon on the taskbar, and then go to Computer.)
Double-click the CD-ROM icon, and then doubleclick start.exe.
Follow the on-screen instructions to continue installation until
either the Connect the machine or the Connection Type
screen appears.
(DocuPrint M228 b / DocuPrint M228 db /
DocuPrint M228 fb / DocuPrint M228 z)
Connect the machine
®
8: click the (File Explorer)
Follow the on-screen
instructions to continue
installation.
Finish
(DocuPrint M268 dw / DocuPrint M268 z)
Connection Type
For USB Connection
For Wired Network Connection
Connect a network cable first.
For Wireless Network Connection
We recommend preparing a USB cable
to use temporarily during the wireless
setup.
Follow the on-screen
instructions to continue
installation.
Finish
5B
Wireless Network Connection
[Recommended]
Select this option if you have a USB cable to
use temporarily for wireless setup.
Select this option if you do not have a USB cable.
Follow the on-screen
instructions to continue
installation.
Finish
Configuration without using the CD-ROM (Windows® without CD-ROM drive or Macintosh)
5C
Download the full driver and software package by visiting the Fuji Xerox website at http://www.fujixeroxprinters.com/.
After you download the driver and software package, follow the on-screen instructions until either the Connect the machine or the Connection Type screen appears. Refer to
5A Configuration using the CD-ROM (Windows®).
One-push wireless setup for mobile devices (Wireless models only)
If your wireless LAN access point/router supports automatic wireless (one-push) setup (WPS/AOSS™), you can set up your machine without using a computer.
Wireless setup is now complete.
Press the WPS or AOSS™ button on your
wireless LAN access point/router.
Press the WiFi button on your machine.
Loading...