Fuji Xerox DocuPrint CP315 dw Setting Up

Wifi Setup DocuPrint CP315 dw

Connecting to

Setting up the
DocuPrint CP315 dw
printer on a wireless
network

DPCP315dw_QSG_P1

the Wireless
Network

1

WPS-PBC

Note: WPS-PBC (WPS Button), WPS-PBC (Operator Panel)

and WPS-PIN is only available when the wireless access

manual provided with the router.

point or router supports WPS-PBC. Please refer to the

Start the WPS-PBC on the wireless access point (router)
within 2 minutes.

2

(WPS Button)

Before starting WPS-PBC, confirm the position of the WPS

button on the wireless access point or router. Please refer to
the manual supplied with the router for more information.

1

The printer restarts automatically to complete the
wireless LAN connection setting.

Ensure you have the name of your wireless
network (SSID), wireless network password,
security and encryption types.

To find the name and type of security

encryption of your wireless network on
your computer (example Windows 7):

a) Go to the Start Menu. Select Control

Panel and click on Network and
Sharing Centre .

b) Click on Manage Wireless Networks.
Double click on your preferred wireless
network. Note the SSID. Click on the
security tab. Note the security
encryption type.

Ensure you have connected the Wireless
LAN Adapter to the rear of the machine.

See over page for instructions.

Before you begin

LCD
Panel

Power
Button

Arrows

Ready

LED

WPS

Menu

Back

NFC

Up/Down

Arrows

Left/Right

OK

Job
Cancel

Interact/
Error

LED

Getting to know the

Control Panel

Press and hold the [WPS] button until the LCD
panel shows ‘Press WPS button on router’.

Press the or button to select [Administrator Menu],
and then press the button.

2

1

Write down the eight-digit PIN code displayed on the
touch panel:

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

2

WPS-PBC

This procedure requires access to the WPS-PIN functions
of your wireless access point (WAP) or router.

For further information please refer to the documentation
supplied with your wireless access point or router.

The printer restarts automatically to complete the
wireless LAN connection setting.

3

WPS-PIN

This procedure requires access to the WPS-PIN functions
of your wireless access point (WAP) or router.

For further information please refer to the documentation
supplied with your wireless access point or router.

(Using the Printer Menu)

Press the <Menu> button.

Press the or button to select [Wi-Fi], and then
press the button.

4

Press the or button to select [WPS Setup], and
then press the button.

5

Press the or button to select [Push Button], and
then press the button.

6

Press the or button to select [Network Setup],
and then press the button.

3

Press the or button to select [Start], and then
press the button.

7

When the message “Press WPS Button on router” is
displayed, start the WPS-PBC operation on the access
point or wireless router within 2 minutes.

8

Press the or button to select [Administrator Menu],
and then press the button.

2

1

Press the <Menu> button.

Press the or button to select [Wi-Fi], and then
press the button.

4

Press the or button to select [WPS Setup], and
then press the button.

5

Press the or button to select [PIN Code], and
then press the button.

6

Press the or button to select [Network Setup],
and then press the button.

3

Make sure the message “Operate wireless router” is
displayed, and then enter the PIN code into the
wireless LAN access point.

Press the or button to select [Start Configuration],

then press the button.

8

http://onlinesupport.fujixerox.com/

7

9

The printer restarts automatically to complete the
wireless LAN connection setting.

4

Auto SSID Setup

Press the or button to select [Administrator Menu],
and then press the button.

2

1

Press the <Menu> button.

Press the or button to select [Wi-Fi], and then
press the button.

4

Press the or button to select [Wi-Fi Setup], and
then press the button.

5

Press the or button to select [Network Setup],
and then press the button.

3

Ensure you have the name of your wireless network (SSID),
wireless network password, security and encryption types.

For further information refer to
“Before you begin” at the start of this instruction.

Press the or button to select the desired access
point, then press the button.

If the desired access point doesn’t appear, proceed to
“Manual SSID Setup”.

6

.

Wifi Setup DocuPrint CP315 dw

Connecting to

DPCP315dw_QSG_P2

the Wireless
Network

Enter the SSID, then press the button.

7

If you do not set security for your wireless network:

a) Press the or button to select [No Security] and
then press the button.

If you use [Mixed Mode PSK] or [WPA2-PSK-AES] encryption:

a) Press the or button to select [Mixed Mode PSK] or
[WPA2-PSK-AES], then press the button.
b) Enter the passphrase, then press the button.

If you use [WEP] encryption:

a) Press the or button to select [WEP], then press the
button.
b) Enter the WEP key, then press the button.
c) Select the desired transmit key, then press the button.

The printer restarts automatically to complete the
wireless LAN connection setting.

9

5

Manual SSID Setup

Attaching the Wireless LAN Adapter

1.

Turn off the printer.

2.

Push down on the latch of the wireless adapter socket cover, then remove the cover.

3.

Insert the connector of the wireless LAN adapter to the wireless adapter socket.

Enter the WEP key or passphrase.

If the encryption type of the selected access point is WEP:
a) Enter the WEP key, then press the button.

If the encryption type of the selected access point is WPA,
WPA2 or Mixed:
a) Enter the passphrase, then press the button.

7

The printer restarts automatically to complete the
wireless LAN connection setting.

Press the or button to select [Administrator Menu],
and then press the button.

2

1

Press the <Menu> button.

Press the or button to select [Wi-Fi], and then
press the button.

4

Press the or button to select [Wi-Fi Setup], and
then press the button.

5

Press the or button to select [Network Setup],
and then press the button.

3

Press the or button to select [Manual Setup] and
then press the button.

6

Press the or button to select the network mode from
[Infrastructure] and [Ad-hoc], then press the button.

8

Press the or button to select the encryption type from
[No Security], [Mixed Mode PSK], [WPA2-PSK-AES] or [WEP].

Do you know about the Fuji Xerox
Online Support Assistant?

http://onlinesupport.fujixerox.com/

24/7 access to a range of self help resources.
In a web browser go to:

http://onlinesupport.fujixerox.com/

1) Enter the product model number:
DPCP

315dw

2) Choose the matching product
from the list.

3) Choose from a variety of tools.

- Self Help: A comprehensive knowledge

base of solutions, many with embedded

Customer Training Videos.

- Documentation: Downloadable User and

Admin Guides, Quick Start Guides etc.

- Drivers: Latest downloadable drivers.

Please subscribe to our YouTube Channel to
be notified each time we upload new videos!

fujixeroxtv

.