Fujitsu Siemens Computers Primergy TX200 S3 Datasheet

Issue April 27, 2007

PRIMERGY TX200 S3

Dual Socket Intel® Xeon® Server - Cost-efficient

expansion options and failsafe operation

Pages 2

PRIMERGY TX Tower Servers ensure carefree and continuous operation with proven data center technology. Their
design for maximum ease of use and ease of management has been honored with industry design awards. The latest
processor generation combined with innovative air flow cooling technology (“Cool-safe”) assure a long life and the
highest possible performance at work. And as your business grows, so do our PRIMERGY towers, providing plenty of
headroom for expansion so that you benefit longer from your investments in PRIMERGY tower servers. For corporate
workgroups and remote sites, PRIMERGY TX servers ensure less troubleshooting and lower costs with their complete
PRIMERGY ServerView Suite remote management functions – flexible management from anywhere at any time. Since
corporate infrastructure is subject to consolidation changes, our universal tower-to-rack conversion kit protects your
investment by prolonging the system’s lifecycle.

The flexible custom supply model and our build-to-order process mean that only fully built and pre-tested solutions are
shipped to customers, who can select from a broad family of tower models to meet their individual needs.

PRIMERGY TX200 S3

Flexible expansion options are the key to placing new or
larger workloads on your server. This applies not only to
physical capacity, such as the number of disk drives,
advanced data protection schemes, or I/O connectivity; in
particular consideration of the transition to 64-bit computing is
a must in today’s technology purchase decisions.
The PRIMERGY TX200 S3 is a perfect match for these
requirements, providing you with a cost-efficient standard.
TX200 is a failsafe operation platform for your application
stacks, with standards such as disk mirroring, hot-plug disks,
SDDC and hot-spare memory and the “Cool-safe™”
innovative air flow system design. Expandability is covering
for heavy workload: up to 16 GB FBD667 memory, up to 6
SCSI, SAS or SATA hard disk drives, and sufficient free PCI
slots for heavy I/O requirements. Your business can rely on
this solution!
In addition, further options – such as extended RAID
functions, clustering options and redundancy for power
supplies and fans – tailor these standards to your individual
safety needs.

Key Features Benefits

 Intel Dual- or Quad-Core Xeon 5000 sequence and 2x 2 / 4

/ 2x 4 MB SLC offer outstanding Dual-/Quad-Core
performance and balanced architecture that incorporates
next generation memory and I/O technologies

 Higher overall productivity through outstanding Dual-

/Quad-Core performance with faster FSB, larger L2 cache
etc and extended 64-bit address space and therefore
more direct useable memory and performance

 Onboard 8-port SAS controller with low-cost ZCR RAID 0,

1, 10, 5, 50 option, or 2-channel U320 SCSI/RAID PCI
controller or 6-port SATA controller with RAID 0, 1 (RAID 5
iButton option) functionality

 Hot spare memory

 Enhanced data reliability, business continuity right from

the entry-class server, more value for money as well as
added data safety

 Up to 6x hot-plug HDD (SAS, SCSI or SATA)

Hot-plug functionality is available as option for the most
important system components: hot-plug, redundant PSU
and system fans, integrated RSB Advanced Pack with e.g.
disable local monitor function (options)

 PCIe and PCI-X slots, 1x Gbit LAN

 Tailor made availability, offers the security level which is

recommended by your individual application demands

 Fast communication link through onboard PCI-Express

interconnect

Datasheet ⏐ Issue: April 27, 2007⏐ PRIMERGY TX200 S3 Page 2 / 2

All rights, including rights created by patent grant or registration of a utility model or design as well
as rights of technical modifications are reserved. Delivery subject to availability. Design ations may
be trademarks, the use of which by third parties for their own purposes may violate the rights of the
trademark owners.

Copyright © Fujitsu Siemens Computers, 05/2007

Published by

Fujitsu Siemens Computers
http://www.fujitsu-siemens.com/

Company stamp

Type

Dual Socket Tower Server

System board

D 2109

Chip set

Intel® 5000V

Processors

Dual- or Quad-Core Intel® Xeon® (1 - 2)

Frequencies (GHz)

5050 (3.00) / 5060 (3.20), or 5110 (1.60),
5120 (1.86) / 5130 (2.00), 5140 (2.33) Dual­Core, or E5310 (1,60) E5320 (1 .86) Quad­Core

Front-Side­Bus/Socket

667 / 1066 / 1333; 1066 MHz (E5310/20)

Second-Level-Cache

2x 2 / 4 (51xx) / 2x 4 MB (E53xx), ECC

Memory

1 GByte bis max. 16 GByte

2-way interleaved, registered ECC PC2-5300F FullyBuffered DIMM
RAM; 3 banks with 2 slots each for modules 512 MB, 1, 2 and 4 GB;
SDDC (Chipkill) and hot-spare memory opt.

Flash-EPROM

Local BIOS update with floppy disk; Remote BIOS-Update via LAN
with Global Flash and service partition

Interfaces

Serial 1

1x RS-232-C (9-pin) (usable for
iRMC or system)

Serial 2

1x RS-232-C (9-pol)

Parallel (option)

Centronics, 25-pin, EPP/ECP comp.

Keyboard, Mouse

2x PS/2

USB 2.0

1x front, 2x back (UHCI, 480 Mbit/s)
2x internal for backup drive

Graphics

1x VGA (15-pin)

LAN

1x RJ45, 1x Service-LAN RJ45

Front Panel

On/off button; NMI-, reset button; front LEDs for hard disks access
(green), power (amber/green); front and back for system status
(amber), identification (blue),

Onboard controller **

IDE (ATA100)

1-channel Fast-IDE controller for 1 device

SAS variant (LSI1068)

8-Port SAS controller with RAID 0, 1, 1E (1E
requires 3 or more HDD´s) (also for SATA
HDD´s)

RAID option
(PCI card, ZCR)

RAID level 0, 1, 10, 5, 50 extension for
onboard SAS controller

SATA version
(ESB2 onboard)

6-Port SATA Controller with RAID level 0,
1,10; RAID 5 iButton key optional

LAN (Intel® GilGal)

1x 10/100/1000 Mbit/s Ethernet
(PCE-Boot via LAN from PXE server)

Server management

Integrated Remote Management Controller
(iRMC) incl. graphics controller, IPMI 2.0

PCI controller ** in SCSI base unit

LSI320/2

2-channel U320 SCSI/RAID 0, 1, 5 controller
with 128 MB SDRAM ECC Cache and TBBU

Hard disk drives

36, 73, 146, 300 Gbyte SAS (no mix with
SATA)
80, 160, 250, 500 Gbyte SATA
36, 73, 146, 300 Gbyte SCSI

1 Gbyte equals one billion bytes when referring to hard disk drive capacity; accessible
capacity may vary.

I/O Slots (Standard)

1x PCIe x8, long; 1x PCIe x8 (x4 wired), long; 2x PCI-X 64-bit/ 100
MHz, 1x long, 3,3V; (1 for ZCR in SAS variant, 1x occupied in SCSI
version) (1x with max. 133 MHz (IOOP™), if only 1 slot is occupied)
(with SAS only 66/100 MHz); 1x PCI 32-bit / 33 MHz, long, 5V

Drive bays

for hard disks

6x 3.5/1-inch, hot-plug, slide-in chassis

for optional SCSI
hard disks

3x 3.5/1-inch, hot-plug, requires
2 bays for accessible drives

for accessible drives

3x 5,25/1,6-inch free or;
2x 5,25/1,6-inch free
1x 5,25/0,5-inch for CD,DVD;
CD-/DVD-RW
1x 3,5/1-inch occupied with FD

System fans

Standard 2 fans
Hot-plug, redundant (opti on): (2 + 2) fans + 2 fans for CPU`s

Electrical values

1x standard or 2x optional redundant hot-plug power supplies
Output power 600 W / 1 + 1 x 600 W each
Rated voltage range 100 - 240 V
Rated frequency 50 - 60 Hz

Max. rated current 100 V - 240 V / 9.0 A – 5.0 A
Rated current in basic

configuration

100 V - 240 V / 4.4 A - 1.5 A

Active power 798 W
Apparent power 809 VA

Heat emission 2873 kJ/h (2723 btu/h)

Temperature/Noise/Dimension/Weight

Ambient temperature 10°C - 35°C (DIN IEC 721-3-3) class

3K2

Declared noise emission
according to ISO 9296 idle* operating* *(ISO 7779)
L

WAd

(1 B = 10 dB) : 5,7 B*** 5,8 B***

L

pAm

(bystander position): 39 dB*** 40 dB***
Floor-stand (HxWxD) 473 x 286 x 775 mm
Rack (HxWxD) 177 x 483 x 770 mm;

Rack mounting depth 735 mm; 4 U

Weight 25 - 40 kg (configuration dependent)

Compliance with Norm and Standards
Product safety

Global IEC 60950-1
Europe EN 60950-1
USA UL 60950-1
Canada CAN/CSA C22.2 No. 60950-1-03

Electro magnetic compatibility

This product and the released accessories, are in compliance with
emission class A. In certain cases measures have to be taken to
reduce the electro magnetic influence to other equipment.

Europe EN 55022 class A, EN 55024,

EN 61000-3-3, EN 61000-3-2
Taiwan / Japan CNS 13438 class A; VCCI class A
Australia / New Zealand AS / NZS CISPR 22 class A
USA / Canada FCC class A

Declaration of conformity

Europe (CE) 89/336/EEC(EMC);73/23 EEC(LVD)
North America FCC class A

Approvals
Product safety

Global CB
Europe CE
USA / Canada

CSA

US

/ CSA

C

There is general compliance with the safety requirements of all
European countries and North America. National approvals
required in order to satisfy statutory regulations or for other
reasons, can be applied for on request.

Supported operating systems

Actual release status operating systems: e.g. Windows 2003;
Linux SLES, Linux EL; VMware Infrastructure see PRIMERGY
released OS

http://extranet.fujitsu­siemens.com/products/primergy/opsys/relcurrsys/osrel_a.html

** For supported controllers (onboard and PCI cards for SCSI,
RAID, LAN, WAN, etc.), please refer to the corresponding system
configurator.
*** only with standard fans and standard PSU

Server Management (see separate data sheets)
Standard: PRIMERGY ServerView Suite;

PDA, ASR&R
Optional: RemoteView, iRMC Advanced Pack