Fujitsu Siemens Computers D1534, RiserCard E383, D1534-A Technical Manual

answers

Mainboard D1534

RiserCard E383

Deutsch / English

2

Technisches Handbuch / Technical Manual

Sie haben ...

... technische Fragen oder Probleme?
Wenden Sie sich bitt e an:

• Ihren zuständigen Vert ri ebspartner

• Ihre Verkaufs stelle

Weitere Informationen f i nden Sie im Handbuch "Sicherhei t" und "Garantie".
Aktuelle Inform ationen und Updates (z. B. B IOS-Update) zu unseren Mainboards finden Sie im

Internet: http://www.fujitsu-siemens.com/mainboards

Are there ...

... any technical problems or other questions you need clarified?
Please contact :

• your sales partner

• your sales out l et

You will find further information in the manuals "Safety" and "Warranty".
The latest informat i on and updates (e. g. BIOS update) on our m ai nboards can be found on the

Internet under: http://www.fujitsu-siemens.com/mainboards

Dieses Handbuch wurde auf Recycling-Papier gedruckt.
This manual has been printed on recycled paper.
Ce manuel est imprimé sur du papier recyclé.
Este manual ha sido impreso sobre papel reciclado.
Questo manuale è stato stampato su carta da riciclaggio.
Denna handbok är tryckt på recyclingpapper.
Dit handboek werd op recycling-papier gedrukt.

Herausgegeben von/Published by
Fujitsu Siemens Computers GmbH

Bestell-Nr./Order No.:
Printed in the Federal Republic of Germany
AG 0503 05/03

A26361-D1534-Z120-1-7419

A26361-D1534-Z120-1-7419

Mainboard D1534

Technisches Handbuch

Deutsch

English

Technical Manual

Ausgabe Mai 2003
May 2003 edition

Intel, Pentium und Cel eron sind eingetragene Warenzeichen der Intel Corporation, USA.
Microsoft, MS, MS-DOS und Windows sind eingetragene Warenzeichen der Microsoft

Corporation.
PS/2 und OS/2 Warp sind ei ngetragene Warenzeichen von Internat i onal Business Machines,

Inc.
Alle weiteren genannten Warenzeichen sind Warenzeichen oder eingetragene Warenzeichen

der jeweiligen Inhaber und werden als geschützt anerkannt.
Copyright  Fujitsu Siemens Computers GmbH 2003
Alle Rechte vorbehalten, insbesondere (auch auszugsweise) die der Übersetz ung, des

Nachdrucks, der Wiedergabe durch Kopieren oder ähnliche Verfahren.
Zuwiderhandlungen verpflicht en zu Schadenersatz.
Alle Rechte vorbehalt en, insbesondere für den Fall der Pat enterteilung oder GM-Eintragung.
Liefermöglichkeiten und technische Änderungen vorbehalten.
Dieses Handbuch wurde erst el l t von

cognitas. Gesel l schaft für Technik -Dok umentation mbH
www.cognitas.de

Intel, Pentium and Cel eron are regi stered trademarks of I ntel Corporation, USA.
Microsoft, MS, MS-DOS and Windows are registered trademarks of Microsoft Corporation.
PS/2 and OS/2 Warp are registered trademarks of Int ernat i onal Business Machines, Inc.
All other trademarks referenced are trademarks or registered trademarks of t heir respective

owners, whose protect ed ri ght s are acknowledged.
All rights, including rights of translation, reproduction by pri nting, copying or sim i l ar m ethods,

even of parts are reserv ed.
Offenders will be liable for damages.
All rights, including rights created by patent grant or regis t ration of a utility model or design,

are reserved. Delivery subject to availability.
Right of technic al m odi fication reserved.
This manual was produced by

cognitas. Gesel l schaft für Technik -Dok umentation mbH
www.cognitas.de

Übersicht/Overview Mainboard D1534

Interne Anschlüsse und Steckplätze / In ternal
connectors and slots

14

13

AGP

12
11

10

9

8

Channel A, Slot 1

Channel B, Slot 1

7

6

Mainboard

1 =

PCI-Baugruppensteckplatz für Riser
E383 / PCI riser slot for Riser E383

2 = Diskettenlaufwerk / Floppy disk drive

PCI Riser Slot

3 = Lüfter 1 / Fan 1
4 = Stromversorgung +12 V ( Power

1

2

3
4

supply +12 V

5 = USB C/D
6 = CD-Audio-Eingang / CD-Audio Input
7 = IDE-Laufwerke 1/2 / IDE-drives 1/2
8 = IDE-Laufwerke 3/4 / IDE-drives 3/4
9 = Stromversorgungsüberwachung /

Power control

10 = Serial ATA1
11 = Stromversorgung / Power

supply

12 = Serial ATA0
13 = S/PDIF-Anschluss / S/PDIF

connector

14 = Steckbrücken / Jumper

Optionale Komponenten / Optional
components

5

1

Externe Anschlüsse hinten /
External connectors rear

LAN

VGA

RiserCard

2
3

4

1 =

Gehäuseüberwachung / Intrusion
switch

2 = PCI-Steckplatz 1 / PCI slot 1
3 = PCI-Steckplatz 2 / PCI slot 2
4 = Interner Lautsprecher / Internal

speake

r

Externe Anschlüsse vorne /
External connectors front

A26361-D1534-Z120-2-7419 Umschlag /Cover

Contents

Übersicht/Overview Mainboard D1534

Mainboard D1534.............................................................................................................................1

Notational conventions ..............................................................................................................1

Important notes..................................................................................................................................2

Information about boards...........................................................................................................2

List of features...................................................................................................................................3

Special technical features - special features.............................................................................4

Interfaces and connectors..............................................................................................................6

External ports....................................................................................................................................6

Internal ports and connectors ............................................................................................................7

Hard disk connection.................................................................................................................7

Pin assignment of internal ports.........................................................................................................8

Jumper settings.............................................................................................................................12

Add-on modules / Upgrading........................................................................................................13

Installing and removing processors..................................................................................................13

Installing processor with heat sink ...........................................................................................13

Upgrading main memory..........................................................................................................15

Upgrading AGP screen controllers...................................................................................................16

Adding PCI cards.............................................................................................................................16

PCI bus interrupts - Selecting correct PCI slot.........................................................................16

Replacing the lithium battery....................................................................................................18

BIOS update....................................................................................................................................19

BIOS Recovery - Recovering System BIOS ....................................................................................20

Microcode Update ...........................................................................................................................20

Drivers .............................................................................................................................................21

Error messages .............................................................................................................................22

DOS error messages.......................................................................................................................25

SmartCard reader - error messages ................................................................................................26

Glossary..........................................................................................................................................27

A26361-D1534-Z120-2-7419 English

Mainboard D1534

Your mainboard is availabl e i n di fferent configuration l evels. Depending on the confi guration chosen,
some of the hardware component s described may not be av ai l abl e on your mainboard.

Additional information

Information on the BIOS Setup and addit i onal descriptions of the dri vers are contained:

• in the readme files on y our hard di sk

• on the driver floppy disks included

• on the CD "Drivers & Utilities Collection" or "Drivers & Utilities" or "ServerStart".

The programme Acrobat Reader must be installed to be able t o open the manuals. You will

i

Notational conventions

find the programme on the CD-ROM directory: utls/ acrobat.
For more details please read t he according readme.txt files.

The meanings of the sy m bol s and fonts used in this manual are as follows:

indicates inform ation which is important for your health or for prevent i ng physical

!

i

Ê Text which follows this s ymbol describes act ivities that m ust be performed in the order shown.

Ë This sym bol i ndi cates that you mus t enter a blank space (press the Space Bar) at this poi nt .

Ú This symbol indi cates that you mus t press the Enter key.

Text in this typeface indicates sc reen outputs.

Text in this bold typeface indicates the ent ri es you make via the k eyboard.

Text in italics indicates commands or menu items.
"Quotation marks " i ndi cate names of chapters or terms.

damage.

indicates additi onal i nformation which is required to use the system properly.

A26361-D1534-Z120-2-7419 English - 1

Mainboard D1534

Important notes

With the mainboard inst al l ed you must open the system to access the mainboard. How to dismantle
and reassemble the system is described in the operating manual accompanying the system.

Connecting cables f or peri pheral s must be adequately s hi el ded to avoid interference.

Observe the safety notes in the operating manual of your system.

!

Incorrect replacem ent of the lithium battery may lead to a risk of explosion. It is therefore
essential to obs erve the instructions in the "Add-on modules / Upgradi ng" - " Repl acing
the lithium battery" section.

Components can become very hot during operation. Ens ure you do not touch
components when making extensions to the m ai nboard. There i s a danger of burns!

The shipped version of t hi s board complies with t he requi rem ents of the EEC directive
89/336/EEC "Electromagnetic compatibility".

Compliance was tes t ed i n a typical PC confi guration.
When installing the board, refer to the specific installation informat ion in the manual for

the receiving device.

The warranty is invalidated if the system is damaged during the installation or

i

replacement of expans i ons. Information on whic h expansions you can use i s available
from your sales out l et or the customer service centre.

Information about boards

To prevent damage to the mainboard, the components and conductors on it, please take great care
when you insert or remove boards. Take great care to ensure t hat extension boards are sl otted in
straight, without damaging components or conductors on the mainboard, or any ot her components,
for example EMI spring contacts.

Remove the plug from the mains outlet so that system and mainboard are totally disconnected from
the mains voltage.

Be careful with the l ocking mechanisms (catches, c entring pins etc.) when you repl ace the
mainboard or components on it, for example memory m odul es or processors.

Never use sharp object s (screwdrivers) for l everage.

Boards with elect rostatic sensitive devices (E S D) are i dentifiable by the label s hown.
When you handle boards fitt ed wi t h E SDs, you must, under al l circumstances ,

observe the following:

• You must always discharge stat i c build up (e.g. by touchi ng a grounded obj ect)

before working.

• The equipment and tools you use must be free of static charges.

• Remove the power plug from the mains supply before i nserting or removing

boards containing ESDs.

• Always hold boards with ESDs by their edges.

• Never touch pins or conductors on boards fitted with ESDs.

2 - English A26361-D1534-Z120-2-7419