COMPONENT
.com Technisches Handbuch / Technical Manual
Systembaugruppe / System board D1381
Are there ...
... any technical problems or other questions which you would like to be clarified?
Please contact :
· your sales partner
· your sales out l et
Further information can be f ound i n the "Safety and Ergonomi cs" manual.
The latest informat i on on our products, tips, updates, etc., can be found on the internet under:
http://www.fujitsu-siemens.com
Are there ...
... any technical problem or other question you need clarified?
Please contact :
· your sales partner
· your sales out l et
You will find further information in the manual "Saf ety and Ergonomics".
The latest informat i on on our products, tips, updates, etc., can be found on the Internet under:
http://www.fujitsu-siemens.com
Dieses Handbuch wurde auf Recycling-Papier gedruckt.
This manual has been printed on recycled paper.
Ce manuel est imprimé sur du papier recyclé.
Este manual ha sido impreso sobre papel reciclado.
Questo manuale è stato stampato su carta da riciclaggio.
Denna handbok är tryckt på recyclingpapper.
Dit handboek werd op recycling-papier gedrukt.
Herausgegeben von/Published by
Fujitsu Siemens Computers GmbH
Bestell-Nr./Order No.:
Printed in the Federal Republic of Germany
AG 0402 04/02
A26361-D1381-Z120-1-7419
A26361-D1381-Z120-1-7419
Systembaugruppe
D1381
System Board D1381
German
English
Technisches Handbuch
Technical Manual
Ausgabe April 2002
April 2002 edition
Pentium and Celeron are regist ered trademarks of Intel Corporation, USA.
Microsoft, MS, MS-DOS and Windows are registered trademarks of Microsoft Corporation.
PS/2 and OS/2 Warp are registered trademarks of Int ernational Business M achines, Inc.
All other trademarks referenced are trademarks or regi stered trademarks of t hei r respective
owners, whose protect ed ri ght s are acknowledged.
Copyright ã Fujitsu Siemens Computers GmbH 2002
All rights, including rights of translation, reproduction by printing, copying or similar methods,
in part or in whole, are reserved.
Offenders will be liable for damages.
All rights, including rights created by patent grant or regis tration of a utility model or design,
are reserved.
Delivery subject to availability. Right of technical modification reserved.
This manual was produced by
cognitas. Gesel l schaft für Technik -Dokumentation mbH
www.cognitas.de
Intel, Pentium and Cel eron are regi stered trademarks of Intel Corporation, USA.
Microsoft, MS, MS-DOS and Windows are registered trademarks of Microsoft Corporation.
PS/2 and OS/2 Warp are registered trademarks of Int ernational Business M achines, Inc.
All other trademarks referenced are trademarks or regi stered trademarks of t hei r respective
owners, whose protect ed ri ght s are acknowledged.
All rights, including rights of translation, reproduction by printing, copying or similar methods,
even of parts are reserv ed.
Offenders will be liable for damages.
All rights, including rights created by patent grant or regis tration of a utility model or design,
are reserved. Delivery subject to availability.
Right of technic al m odi fication reserved.
This manual was produced by
cognitas. Gesel l schaft für Technik -Dokumentation mbH
www.cognitas.de
Contents
Introduction........................................................................................................................................1
Notational conventions ..............................................................................................................1
Important notes..................................................................................................................................1
Information about boards...........................................................................................................2
Features............................................................................................................................................3
External ports ............................................................................................................................4
Internal ports and connectors ....................................................................................................5
Hard disk connection.................................................................................................................6
LAN connector...........................................................................................................................6
Screen resolution.......................................................................................................................7
PCI bus interrupts......................................................................................................................7
Settings with switches and jumpers...................................................................................................8
Recovering System BIOS - switch 2..........................................................................................8
Add-on modules ................................................................................................................................9
Installing and removing processors..........................................................................................10
Upgrading main memory..........................................................................................................11
Replacing the lithium battery....................................................................................................12
Glossary..........................................................................................................................................13
A26361-D1381-Z120-1-7419
Introduction
Depending on the configuration chosen, some of the hardware c omponents described
i
You will find further information in the "BIOS Setup" description.
Further information about drivers is provided in t he readm e files on the hard disk, on the supplied
drivers diskettes, on the "Drivers & Utilities" or on the "ServerStart" CD.
Notational conventions
The meanings of the sy m bol s and fonts used in thi s manual are as follows:
!
may not be available on your system board.
Pay particular attention to text marked with this symbol. Failure to observe this warning
endangers your life, des troys the device, or may lead to loss of dat a.
i
Ê Text which follows this symbol describes activities that mus t be performed in the order shown.
Ë This symbol i ndi cates that you must enter a blank space (press the Space Bar) at t hi s point.
Ú This symbol indi cates that you mus t press the Enter key.
Text in this typeface indicates sc reen outputs.
Text in this bold typeface indicates the ent ri es you make via the k eyboard.
Text in italics indicates commands or menu items.
"Quotation marks " i ndi cate names of chapters or terms.
Supplementary inform ation, remarks, and t i ps follow this symbol.
Important notes
Store this manual c l ose to the device. If you pass the devi ce on to third parties, you should pass this
manual on with it.
Be sure to read this page c a ref ul l y and note the information bef ore you open the device.
!
You cannot acces s the system board components without first opening the device. How
to dismantle and reassemble the device is described in the Operating Manual
accompanying the dev i ce.
Please observe the safety informati on provided in the "Important notes" chapter in the
device’s operating m anual .
Incorrect replacem ent of the lithium battery may lead to a risk of explosion. I t is therefore
essential to obs erve the instructi ons in the "Add-on modules" - " Repl acing the lithium
battery" section.
A26361-D1381-Z120-1-7419 English - 1
Important notes
The shipped version of t hi s board complies with t he requi rem ents of the EEC
directive 89/336/EEC "Elec t romagnet ic compatibility".
Compliance was tes t ed i n a typical PC conf i guration.
When installing the board, refer to the s pecific installation information in the
Operating Manual or Technical M anual for the receiving device.
Connecting cables f or peri pheral s must be adequately s hi el ded to avoid interference.
Components can become very hot during operation. Ensure you do not touch
!
i
components when maki ng extensions to the system board. There is a danger of burns!
The warranty is invali dated if the device is damaged during the installat i on or
replacement of system expansions. Information on which system expansions you can
use is available f rom your sales outlet or t he customer service centre.
Information about boards
To prevent damage to the system board or the components and conductors on it, please take great
care when you insert or remove boards. Take great care to ensure that extension boards are slotted
in straight, wit hout damaging components or c onductors on the system board, or any other
components, for example EMI spring c ontacts.
Be especially careful with the locking mechanisms (catches, cent ri ng pi ns etc.) when you replace
the system board or components on it, for exampl e m em ory modules or processors.
Never use sharp object s (screwdrivers) for l everage.
Boards with elect rostatic sensi t i ve devices (ESD) are i dentifiable by the
label shown.
When you handle boards fitt ed wi t h ESDs, you must , under all
circumstances, observe the fol l owi ng points:
· You must always discharge stat ic build up (e.g. by touching a
grounded object) before working.
· The equipment and tools you use must be free of s t atic charges.
· Remove the power plug from the mains supply before i nserting or
removing boards containi ng ESDs.
· Always hold boards with ESDs by t hei r edges.
· Never touch pins or conductors on boards fitted with ESDs.
2 - English A26361-D1381-Z120-1-7419
Features
Features
The components and connectors marked are not necessarily present on the system board.
· System board in µATX format
Intel processor P entium 4 from 1.4 GHz wit h 400 /533 MHz Front Side Bus.
Pentium 4 process ors support MMX technol ogy and Intel Streaming S IMD Extensions. The size and
frequency of firs t-level cache and second-level cache are dependent upon t he processor used.
· Int el chipset 845G
· Intel 82559ET LAN controller (10/ 100 M bi t/s) with RJ45 int erf ace
WOL with Magic Packetä is supported, as is booting from LAN wi th InCom LAN BootP or I ntel
PXE.
· VGA: 24 bit and 350 MHz RAMDA C; Dynamic Video Memory (DVM)
· Anal ogue Devices AD1981A (AC'97) Audio Codec
internal: Stereo CD-In, Audio front panel
external: Mono Mic ro-In, Stereo Line-In, Stereo Line-Out
· 2 DIM M slots for 128 MB up t o 2 GB main memory (DDR-DIMM m em ory modules meet the
PC2100 specific at i on) wi thout ECC
· Flas h B I OS
· Power-on f unctions:
- Wake on RTC
- Wake on LAN
- Wake on PCI Cards
- Wake on USB
- COM1 wake up support (s tandby)
· Energy saving functi ons:
- APM and ACPI (requires an operating system that supports ACPI)
- Switching on/off, standby mode, suspend mode via on/off switch
- Switching on/ of f via software
· Security functions:
- Processor serial num ber
- Cover monitoring: co ver monitoring reports when the cover has been opened without
authorisation.
- System, S etup and Keyboard password
- parallel and serial ports can be deactivated
- Floppy disk write-protection via BIOS Setup
- Boot hard disk vi rus warning function
- Flash BIOS and EEPROMs (on the memory modules) virus protection function.
· 3 PCI slots
PCI slots support 3. 3 V main and auxiliary voltages.
A26361-D1381-Z120-1-7419 English - 3
Features
· 1 AGP slot
The AGP slot support s 4x AGP mode. Only A G P boards with 1.5 V are supported.
· IDE hard di sk controller connected to PCI bus for up t o four IDE drives
(e.g. IDE hard disk dri ves, ATAPI CD-ROM dri ves)
The IDE hard disk cont rol l er are ATA100, ultra DMA capabl e and support PIO modes 0-4.
· Floppy di sk drive controller (possible formats: 720 KB, 1.44 MB, 2. 88 M B)
· The system board supports booting f rom a 120 M B IDE floppy disk drive.
· Real-t i m e clock/calendar wi th integrated battery bac kup
· 4 int ernal US B ports (C / D and E / F)
· 1 int ernal serial port for chipc ard reader (SmartCard reader).
· 1 ext ernal parallel port (ECP- and EPP-compatible)
· 1 external serial port (16C550 compati bl e wi th FIFO)
· 2 external PS/2 ports for keyboard and mouse
· 2 external USB ports (A / B )
External ports
31 4 5 6
8a
8b
8c
2
1 = PS/2 mouse port
2 = PS/2 keyboard port
3 = Serial port
4 = Parallel port
5 = VGA
6 = LAN connector
The components and connectors marked are not necessarily present on the system board.
7 = USB ports A and B
8a = Audio Line-Out
8b = Audio Line-In
8c = Audio Micro-In
7
Headphones
4 - English A26361-D1381-Z120-1-7419
Internal ports and connectors
1
23 4 5
Features
6
7
8
DIMM 2
DIMM 1
16
1 = Power supply ATX
2 = Floppy Disk Drive
3 = IDE drives 3 and 4 (secondary)
4 = Connector for front panel
5 = IDE drives 1 and 2 (primary)
6 = Fan 2
7 = OEM LED
8 = Cover monitoring
15
AGP
PCI 1
9 = USB ports C / D
10 = USB ports E / F
11 = COM2
12 = SP/DIF (digital A udi o)
13 = Audio front panel
14 = CD audio input
15 = Power supply +12 V
16 = Fan 1
PCI 3
PCI 2
1314
12
9
10
11
The components and connectors marked are not necessarily present on the system board.
A26361-D1381-Z120-1-7419 English - 5
Features
Hard disk connection
An ultra ATA/66 or ultra ATA/100 hard disk m ust be connected with a cable especially des i gned for
the ultra ATA/66or ultra ATA/100 mode.
Ê Connect the end of the cabl e marked with blue to the system board.
LAN connector
This system board has an optional Intel 82550ET LAN control l er whi ch supports transf er speeds of
10 Mbit/s and 100 Mbit /s. The LAN controller i s equipped with a 3 KB transm i ssion and receiving
buffer (FIFO) and supports WOL f unction through Magic Packetä.
It is also pos sible to boot a devic e wi t hout its own boot hard disk via LAN. Here Bootix LAN BootP
and Intel PXE are supported.
The LAN RJ45 connector is equipped with a yellow and a green LED (li ght emitting diode).
1 = a connection ex i sts (e.g. to a hub).
2
1
2 = Link Mode: the LA N connection is act i ve.
WOL mode: a Magic Packet
received.
TM
is being
6 - English A26361-D1381-Z120-1-7419
Features
Screen resolution
Depending on the operating system used, the screen resolutions in the following table refer to the
system board screen controller.
If you are using an external s creen controller, you will find details of supported screen resoluti ons in
the Operating Manual or Technic al M anual supplied with the control l er.
Screen resolution Refresh rate (Hz) bpp Colour
1024 x 768 120 32 16 bit
1280 x 1024 100 32 16 bit
1600 x 1200 85 32 16 bit
PCI bus interrupts
The following table shows whi ch PCI bus interrupts are assigned on the system board.
PCI bus interrupt Component on system board:
B, C, D, A PCI bus slot 1
C, D, A, B PCI bus slot 2
D, A, B, C PCI bus slot 3
E, F, G, H PCI bus slot 4
F, G, H, A PCI bus slot 5
G, H, A, B PCI bus slot 6
A, B AGP slot
D First USB controller
H Second USB cont rol l er
E LAN control l er
BSMBus
B AC'97 Audi o
A26361-D1381-Z120-1-7419 English - 7
Settings with switches and jumpers
Settings with switches and jumpers
Switch 1 = must always be set to off
ON
1234
Switch 2 = System BIOS recovery
Switch 3 = must always be set to
Switch 4 = must always be set to off
off
i
The clock frequency of the processor is set automatical l y.
Recovering System BIOS - switch 2
Switch 2 enables recovery of the old system BIOS after an attempt to update has failed. To restore
the old system BIOS you need a Flash BIOS Diskette (please call our customer service cent re).
On The System BI OS executes from fl oppy drive A: and the insert ed "Flash-BIOS-
Diskette" restores the System BIOS on the system board.
Off Normal operation (default setting).
8 - English A26361-D1381-Z120-1-7419
Add-on modules
Exit Suspend mode, switch off t he device and remove the power plug from the mains
!
supply, before carrying out any of the procedures described in this chapter!
Even when you have swit ched off the device, parts (e.g. memory m odul es, AGP and PCI
extension boards) are still supplied with power.
All PCI slots support 3.3 V main and auxiliary voltages. AGP boards support 1,5 V main
and auxiliary voltages.
Add-on modules
4
3
2
DIMM 2
DIMM 1
1
1 = Socket f or processor with heat si nk
2 = Location bank 1 for main memory
3 = Location bank 2 for main memory
AGP
PCI 1
PCI 2
6
5
4 = Lithium battery
5 = PCI slots 1, 2, 3
6 = AGP slot
PCI 3
A26361-D1381-Z120-1-7419 English - 9
Add-on modules
Installing and removing processors
2
3
3
1
1
Ê Pull the lever in the direction of t he arrow (1) and lift it as far as it will go (2).
2
4
4
5
5
A
A
Ê Remove the old processor from the socket (3).
Ê Insert the new proces sor in the socket so that the angled corner of t he processor matches t he
coding on the sock et (A) with regard to the position (4).
The angled corner of the processor may be covered by the heat sink. In this case let
!
Ê Push the lever back down until it clicks into place (5).
yourself be guided by t he m arking in the rows of pins on the underside of the processor.
10 - English A26361-D1381-Z120-1-7419
Add-on modules
Upgrading main memory
These slots are s ui table for 128, 256, 512 and 1024 Mbyt e DDR m em ory modules of the DIMM
format.
Memory modules wit h di fferent memory capac i ties can be combined.
You may only use unbuf fered 2,5 V memory modules . Buffered memory modul es are not
!
Installing a memory module
supported.
DDR-DIMM memory modul es must meet the PC2100 specification.
2
2
Ê Push the holders on each side of the memory com partment outwards.
Ê Insert the memory m odul e into the location (1).
Ê At the same time flip the lateral holders upwards until the memory m odul e snaps in place (2).
Removing a memory module
1
1
Ê Push the clips on the right and left of the compartment outward (1).
Ê Carefully remove t he m em ory module from the compartment (2).
A26361-D1381-Z120-1-7419 English - 11
Add-on modules
Replacing the lithium battery
Incorrect replacem ent of the lithium battery may lead to a risk of explosion.
!
The following graphic represent ation is also valid i f the lithium batt ery is built-in vert i cally.
The lithium battery m ust be replaced with an identi cal battery or a battery type
recommended by the manuf acturer (CR2032).
Do not throw lithium batteries into the household waste. They must be di sposed of in
accordance with local regulations concerni ng special waste.
Ensure that you ins ert the battery the right way round. The plus pole must be on the top!
1
+
+
2
+
3
+
Ê Lift the contact (1) a few millimetres and remove the battery from its socket (2).
Ê Insert a new lithium battery of the same t ype into the sock et (3).
12 - English A26361-D1381-Z120-1-7419
Glossary
Glossary
The technical terms and abbreviations given bel ow represent only a select i on of the full list of
common technic al t erms and abbreviations.
Not all technical terms and abbreviations l i sted here are valid for the des cribed system board.
ACPI Advanced Configuration and
Power Management Interface
AC'97 Audio Codec '97 LAN Local Area Network
AGP Accelerated Graphics Port LSA LAN Desk Service Agent
AMR Audio Modem Riser MCH Memory Controller Hub
AOL Alert On LAN MMX MultiMedia eXtension
APM A dvanced Power Management P64H PCI64 Hub
ATA Advanced Technology
Attachment
BIOS Basic Input Output Sys tem PXE Preboot eXec ut i on Environment
CAN Controll er Area Network RAM Random Access M em ory
CPU Central Processing Unit RAMDAC Random Access M emory Digital
CNR Com m unication Network Ris er RDRAM Rambus Dynamic Random
C-RIMM Continuity Rambus Inline
Memory Module
DIMM Dual Inline Memory Module RTC Real Time Clock
ECC Error Correcting Code SB Soundblaster
EEPROM Electrical Erasable
Programmable Read Only
Memory
FDC Floppy Disk Controller SGRAM Synchronous Graphic Random
FIFO First-In First-Out
FSB Front Side Bus SIMD Streaming Mode Instruction
FWH Firmware Hub SMBus System Management Bus
GMCH Graphics and Memory Cont rol ler
Hub
GPA Graphics Performance
Accelerator
I2C Inter Integrated Circ ui t VGA Video Graphic Adapt er
IAPC Instantly Availabl e P o wer
Managed Desktop PC Desi gn
ICH I/O Controller Hub
IDE Intelligent Drive Electronics
IPSEC Internet Protocol Security
ISA Industrial Standard Architecture
PCI Peripheral Component
Interconnect
Analogue Converter
Access Memory
RIMM Rambus Inli ne M emory Module
SDRAM S ynchronous Dynamic Random
Access Memory
Access Memory
(Single Instruction Multiple Data)
SVGA Super Vi deo Graphi c Adapter
USB Univers al Serial Bus
A26361-D1381-Z120-1-7419 English - 13
Loading...