COMPONENT
.com Additional Technical Manual
System Board D1332, D1331, D1330
Are there ...
... any technical problems or other
questions you need cl ari fied?
Please contact :
· Our Hotline:
Mo-Fr: 8 a.m. - 6 p.m.
Sat: 9 a.m. - 2 p.m.
Tel.: ++49 (0) 180 3777 005
· your sales outlet
The latest informat i on on our products, tips, updates, etc., can be found on the Internet
under: http://www.fujitsu-siemens.com/mainboards
Dieses Handbuch wurde auf Recycling-Papier gedruckt.
This manual has been printed on recycled paper.
Ce manuel est imprimé sur du papier recyclé.
Este manual ha sido impreso sobre papel reciclado.
Questo manuale è stato stampato su carta da riciclaggio.
Denna handbok är tryckt på recyclingpapper.
Dit handboek werd op recycling-papier gedrukt.
Herausgegeben von/Published by
Fujitsu Siemens Computers GmbH
Bestell-Nr./Order No.:
Printed in the Federal Republic of Germany
AG 0102 01/02
A26361-D1332-Z180-1-7619
A26361-D1332-Z180-1-7619
System Board
D1332
D1331
D1330
Additional Technical Manual
January 2002 edition
Intel, Pentium and Cel eron are regi stered trademarks of Intel Corporation, USA.
Microsoft, MS, MS-DOS and Windows are registered trademarks of Microsoft Corporation.
PS/2 and OS/2 Warp are registered trademarks of Int ernational Business M achines, Inc.
Magic Packet i s a registered trademark of A dvanced Micro Devic es, Inc.
Rambus, RDRAM, and t he Ram bus Logo are registered trademarks of Rambus Inc. Di rect
Rambus, RIMM, S O -RIMM, and Direct RDRAM are trademarks of Rambus Inc.
All other trademarks referenced are trademarks or regi stered trademarks of their respective
owners, whose protect ed ri ght s are acknowledged.
Copyright ã Fujitsu Siemens Computers Gm bH 2002
All rights, including rights of translation, reproduction by printing, copying or similar methods,
even of parts are reserv ed.
Offenders will be liable for damages.
All rights, including rights created by patent grant or regis tration of a utility model or design,
are reserved. Delivery subject to availability.
Right of technic al m odi fication reserved.
Contents
Introduction........................................................................................................................................1
Features............................................................................................................................................2
Mechanics.........................................................................................................................................3
Connectors........................................................................................................................................ 5
Power supply monitoring....................................................................................................5
Fan 1 connector.................................................................................................................5
Fan 2 connector.................................................................................................................5
Front panel connector........................................................................................................6
Intrusion connector for case open detect for optional push-button (opener).......................7
USB port C / D 1 - Dual channel........................................................................................7
Wake On LAN (WOL) connector........................................................................................8
CD-ROM audio connector (internal)...................................................................................8
Audio front panel (internal).................................................................................................8
Auxiliary (MPEG, TV) audio connector (internal)................................................................9
Configuration.............................................................................................................................9
Functions controlled by the configuration switch................................................................9
Power......................................................................................................................................10
Power requirement for onboard components (worst case)...............................................10
Power loadability..............................................................................................................10
Documentation ................................................................................................................................10
Installing drivers............................................................................................................................... 11
Upgrading main memory..................................................................................................................11
Troubleshooting...............................................................................................................................11
Message BIOS update.............................................................................................................11
The screen stays bl ank............................................................................................................11
A26361-D1332-Z180-1-7619
Introduction
Depending on the configuration chosen, some of the hardware components described
i
may not be available on your system board.
You will find further information e. g. in the complete system board Technical Manual and in the
"BIOS Setup" description.
Further information regarding drivers is provided on the s uppl i ed dri vers diskett es or on the
"Drivers & Utilities" or "S erv erS tart" CD. For detailed information please read t he "I nstalling drivers"
chapter. The latest B IOS version and drivers can be found on the internet under
http://www.fujitsu-siemens.com/en/service.
Computer system boards and components cont ai n very delicate IC c hi ps. To protect them
!
against damage caused by static elect ri city, you mus t follow these precaut i ons:
· Use a grounded wrist strap.
· Unplug your computer before y ou rem ove any part of the cas i ng.
· Place the system board and the components on a grounded antistatic pad whenever
you remove them from the computer.
Hold components by t he edge, do not touch any pins or connectors on them.
Once you have installed the system board, you should remove the battery prot ection (i.e.
the thin plastic plate between battery and c ontact spring).
A26361-D1332-Z180-1-7619 English - 1
Features
Features
The table shows assembly versions of this system board as an example.
Features D1330-B D1331-A D1332-A
D1332-D
Chipset Intel 845D
Board Size m-ATX m-ATX m-ATX
VGA onboard - - Audio onboard (AC '97) üüü
LAN onboard / with Alert-on-LAN - / - ü / - ü / ü
Thermal Management onboard - - ü
System Monitoring onboard - - ü
Fujitsu Siemens Keyboard Power Button Support --ü
Buzzer onboard / int. Speaker Support ü / - ü / - - / ü
Internal Connectors
DIMM Sock ets (DDR) 2 2 2
AGP Slot (1/2/4x, 32 Bit, 66 Mhz , 1.5 V) 1 1 1
PCI Slots (32Bi t, 33 MHz, 5 V and 3,3 V) 3 3 D1332-A: 3
D1332-D: 1
ISA Slot - - CNR Slot 1 - IDE Interfaces (Ultra DMA/100) 2 2 2
Floppy Interface (up t o 1, 44 M B) 1 1 Floppy Interface (up t o 1,44 MB) with SMD - - 1
CD / AUX Audio Input 1 / 1 1 / 1 1 / 1
Front Panel Audio Output 1 1 1
Wake-on-LAN 1 1 1
Int. Serial Port / with SmartCard Support - / - - / - -/ Int. USB Connectors with SmartCard Support 1 1 1
Int. USB Connectors/shared with CNR 2 / 1 2 / - 2 / -
External Connectors
VGA - - Audio Mic. / in / out (2 x 0.5 W / 8 W) 1 / 1 / 1 1 / 1 / 1 1 / 1 / 1
Game/MIDI 1 1 1
LAN (RJ-45) - 1 1
PS/2 Mouse/K eyboard 1 / 1 1 / 1 1 / 1
Ext. Serial P ort (FIFO, 16550 compatible) 2 2 2
Parallel Port (EPP/ECP) 1 1 1
USB Connectors ex t ernal 2 2 2
2 - English A26361-D1332-Z180-1-7619
Mechanics
Mechanics
Layout System board D1332 / D1331 / D1330
µ-ATX 9.6" x 9.6’ ’ (243.84 mm x 243.84 mm)
Some of the following connectors are optional and m ay therefore not be included on your system
board.
31 4 5
2
1 = PS/2 mouse port
2 = PS/2 keyboard port
3 = Serial port 1
4 = Parallel port
5 = Serial port 2
6 = LAN port
The components and connectors marked are not necessarily present on the system board.
6
7
7 = USB ports A and B
8 = Game/Midi port
9a = Audio Line-Out / Headphones
9b = Audio Line-In
9c = Audio Micro-In
8
9a 9c9b
A26361-D1332-Z180-1-7619 English - 3
Mechanics
15
DIMM 2
DIMM 1
123
4
5
6
7
8
9
10
AGP
PCI 1
14
PCI 3
PCI 2
1213
11
CNR
1 = Power supply
2 = Floppy disk drive
3 = IDE drives 3 and 4 (secondary)
4 = Power supply monitoring
5 = Connector for control panel
6 = IDE drives 1 and 2 (primary)
10 = Wake On LAN
11 = CD audio input
12 = Audio front panel
13 = AUX audio input
14 = Power supply +12V
15 = Fan 1 (e. g. for the processor)
7 = Fan 2
8 = Intrusion control
9 = USB port C / D
The components and connectors marked are not necessarily present on the system board.
4 - English A26361-D1332-Z180-1-7619
Connectors
Connectors
!
Power supply monitoring
Pin Signal
Some of the followi ng connectors are optional!
1
1 AC Outlet on(high ass ert ed)
2 PS FAN Control (low asserted)
3 PS FAN full on (low as serted)
4 PS FAN C (max. 3mA)
5SMB CLK
6SMB DATA
7 VCC EEPROM (+3,3V)
8GND
Fan 1 connector
(processor fan - cont rol l ed and supervised, only
for 3 pin fans)
Pin Signal
1GND
2 Controlled fan voltage (0 V / 6...12 V)
3 Fan sense
Fan 2 connector
(system fan - supervised)
Pin Signal
1GND
2 +12 V
3 Fan sense
1
1
A26361-D1332-Z180-1-7619 English - 5
Connectors
Front panel connector
HD-LED
Message LED
1)
Power On/Off
1)
Reset
1)
Sleep
1) Cable is not included in the delivery scope.
2) The same interface
3) 2pin or 3pin connector possible
SCSI LED Input
1)
Power On
1) 3)
LED
2)1)
Speaker
Sleep LED
1
2
2)
Pin Signal Pin Signal
1 Sleep LED (Cathode) 2 In case of ‘Sound via internal system
speaker’ support: Speaker Negativ
3 Sleep LED (Anode) 4 Key
5Key6GND
7 P owerON_LED (Anode) 8 In case of ‘Sound via internal system
speaker’ support: S peaker Positiv
9 P owerON_LED (Anode) 10 Key pin
11 ‘Sleep LED’ and ‘Power On LED’
12 Key pin
Cathode (GND)
13 M essage LED (Anode) 14 Key
15 Message LED (Cathode) 16 Not connected
17 Key 18 SCSI LED input (low asserted)
19 HD_LED (Anode) 20 SCSI LED input (low asserted)
21 HD_LED (Cathode) 22 Not connec ted
23 GND 24 Key
25 Power button (low assert ed) 26 GND
27 Sleep Button (low asserted) 28 GND
29 Reset button (low as serted) 30 GND
6 - English A26361-D1332-Z180-1-7619
Connectors
Intrusion connector for case open
1
detect for optional push-button
(opener)
Pin Signal
1GND
2 Case open (low asserted)
3 Intrusion swit ch present (low asserted)
12
USB port C / D 1 - Dual channel
(internal or external vi a special wire)
Pin Signal Pin Signal Pin Signal
1 VCC Dual / VCC (fused
max. 500mA and power
supervision wit h over
current detection)
2 Data negative (port C) 8 G ND 14 GND
3
Data positive (port C)
7 Shield GND 13 Key
9 Data positive (port D) 15 Data positive (port C)
17
14
1
7
4 GND 10 Data negativ e (port D) 16 Data negative (port C)
5 Shield GND 11 VCC Dual / VCC (fused
max. 500mA and power
supervision wit h over
current detection)
6 Key 12 Power supply on (CCR
on)
(max. 1 second low
pulse)
17 VCC Dual (fused max.
500mA and power
supervision wit h over
current detection)
18 Key
A26361-D1332-Z180-1-7619 English - 7
Connectors
Wake On LAN (WOL) connector
1
Pin Signal
1 VCC Auxiliary
2GND
3 Wake pulse (high assert ed)
CD-ROM audio connector (internal)
1
Pin Signal
1 Left CD audio input
2 CD GND
3 CD GND
4 Right CD audio input
Audio front panel (internal)
Pin Signal Pin Signal
1 Analog GND 2 Micro Input
3 Key 4 12 V
5 Analog GND 6 Analog GND
7 Analog GND 8 Analog GND
9 Left line output* 10 Right Line Output*
* as stuffing option this can be configured as Headphone Out , but the rear out will in this cas e be
a Line Out only otherwise the rear out is a Headphone Out.
12
8 - English A26361-D1332-Z180-1-7619
Connectors
Auxiliary (MPEG, TV) audio
connector (internal)
1
//Pin Signal
1 Left AUX audio input
2 Analog GND
3 Analog GND
4 Right AUX audio input
Configuration
Functions controlled by the configuration switch
Switch Function SKP RCV N.U. LAUX
1 Password skip on
1Offoff
2 Recovery BIOS on
2Off off
3 Not used
3 Not used
4 Low auxiliary power supply (<2 A) on
4 High auxiliary power supply off
PSS must be switched on for systems with not enough 5 V auxiliary power for all its self powered
wake devices (Wak e On LA N, USB, PCI) in S3-S4.
A26361-D1332-Z180-1-7619 English - 9
Documentation
Power
Power requirement for onboard components (worst case)
Source Voltage Maximum variation Maximum current Comment
Main power supply +12 V ±5 %
Main power supply -12 V ±10 %
Main power supply +5.0 V ±5 %
Main power supply +3.3 V ±5 %
Auxiliary power supply +5.0 V ±5 %
Power loadability
Fuse
number
1 750 mA Keyboard port Not specified
2 500 mA Universal serial bus (USB ) P ort A 500 mA
3 500 mA Universal serial bus (USB ) P ort B 500 mA
4 1250 mA Universal serial bus (USB) Port C 500 mA
Maximum fuse
current
Function Maximum function current
Mouse port Not specified
Game port Not specified
VGA connector Minimum 50 mA
Universal serial bus (USB) Port D 500 mA
Documentation
Ê Insert the "Drivers & Utilities" CD.
Ê If the CD does not start automati cally, run the START.EXE fil e i n the main directory of the CD.
Ê Select your system board or your device.
Ê Select Documentation.
Ê Select - Technical Manuals
Ê Select - Technical Manuals (BIOS)
You may have to ins tall the Acrobat Reader - Software on the CD-ROM
i
(path: utls/ac robat) before reading!
For more details please read t he according readme.txt f i les.
10 - English A26361-D1332-Z180-1-7619
Installing drivers
Installing drivers
Ê Insert the "Drivers & Utilities" CD.
Ê If the CD doesn't start automat i cally call the START.EXE file in the main directory of the CD.
Ê If the system board list is displayed select the system board or selec t under Driver the
operating system used and the audio and video drivers.
Upgrading main memory
Support: The system needs at least one module.
Size: From 64 Mbytes up to 2 Gbytes DDR SDRAM
Technology: PC2100 unbuffered DDR-DIMM modules .
184 pin, 2,5 V, 64 bit, no ECC support
184 pin, 2,5 V, 72 bit, ECC-support
Granularity: For one socket 64, 128, 256, 512 or 1024 MB
Troubleshooting
Message BIOS update
The System BI OS provides optimum support for the processor you hav e chosen. If the message
BIOS update for installed CPU failed
appears the microcode required for the proc essor inserted must st ill be loaded. Further information
on this is available in the "BIOS Set up" manual on t he "Drivers & Utilities" CD provided.
The screen stays blank
If your screen s t ays blank this m ay have the following cause:
The wrong RAM memory module has been inserted
Ê See the chapter "Main Memory" for information which memory m odul es can be used.
ACPI S3 (Save-to-RAM) and/or ACPI S4 (Save-to-Disk) d o esn ' t wo rk
This system board is fully compliant f or A CPI S3 and S4. Therefore it i s PC99 certified by M i crosoft.
If you have any problem s with ACPI please ensure that all of your c om ponents are supporting
ACPI S3 and S4.
- Operating system
- Hardware and drivers of control l ers (e. g. VGA, audio, LAN, SCSI cont rol l ers).
For further information pl ease refer to http://developer.intel.com/technology/iapc/involve.htm.
A26361-D1332-Z180-1-7619 English - 11
Loading...