The latest information on our products, tips, updates, etc., can be found on the Internet
under: http://www.fujitsu-siemens.com/mainboard
Dieses Handbuch wurde auf Recycling-Papier gedruckt.
This manual has been printed on recycled paper.
Ce manuel est imprimé sur du papier recyclé.
Este manual ha sido impreso sobre papel reciclado.
Questo manuale è stato stampato su carta da riciclaggio.
Denna handbok är tryckt på recyclingpapper.
Dit handboek werd op recycling-papier gedrukt.
Herausgegeben von/Published by
Fujitsu Siemens Computers GmbH
Bestell-Nr./Order No.:
Printed in the Federal Republic of Germany
AG 1100 11/00
A26361-D1218-Z180-1-7619
A26361-D1218-Z180-1-7619
A26361-D1218-Z180-1-7619
A26361-D1218-Z180-1-7619A26361-D1218-Z180-1-7619
System Board
D1218 / D1219
Additional Technical Manual
November 2000 edition
Intel, Pentium and Celeron are registered trademarks of Intel Corporation, USA.
Microsoft, MS, MS-DOS and Windows are registered trademarks of Microsoft Corporation.
PS/2 and OS/2 Warp are registered trademarks of International Business Machines, Inc.
Magic Packet is a registered trademark of Advanced Micro Devices, Inc.
Rambus, RDRAM, and the Rambus Logo are registered trademarks of Rambus Inc. Direct
Rambus, RIMM, SO-RIMM, and Direct RDRAM are trademarks of Rambus Inc.
All other trademarks referenced are trademarks or registered trademarks of their respective
owners, whose protected rights are acknowledged.
Copyright ã Fujitsu Siemens Computers GmbH 2000
All rights, including rights of translation, reproduction by printing, copying or similar methods,
even of parts are reserved.
Offenders will be liable for damages.
All rights, including rights created by patent grant or registration of a utility model or design,
are reserved. Delivery subject to availability.
Right of technical modification reserved.
The screen stays blank............................................................................................................16
A26361-D1218-Z180-1-7619
Introduction
This system boards are available in different configuration levels. Depending on the
i
You may find further information e. g. in the complete Technical Manual for the system board and in
the description "BIOS Setup".
Further information to drivers is provided on the supplied drivers diskettes or on the
"Drivers & Utilities" or "ServerStart" CD. For detailed information please look at chapter "Installing
drivers". The latest BIOS version or drivers can be found on the internet under
http://www.fujitsu-siemens.com/en/service.
!
hardware configuration of your device, it may be that you cannot find several options in
your version of the system board, even though they are described.
Computer system boards and components contain very delicate IC chips. To protect them
against damage caused from electric static, you have to follow some precautions:
• Unplug your computer when you work inside.
• Hold components by the edge, don’t touch their leads.
• Use a grounded wrist strap.
Place the system board and the components on a grounded antistatic pad whenever you
work outside the computer.
Once you have installed the system board, you should remove the battery protection (i.e.
the thin plastic plate between battery and contact spring).
A26361-D1218-Z180-1-7619English - 1
Features
Features
The table shows two assembly versions of this system board as example.
FunctionVersion D1218-A1XVersion D1218-B1X
Processor socketPGA 370PGA 370
ProcessorIntel Celeron or Pentium IIIIntel Celeron or Pentium III
FormfactorATXATX
Front Side Bus in MHz66/100/13366/100/133
Chipset815e815e
Memory sockets3 DIMM3 DIMM
PCI slots55
AGP Port11
CNR slot Type A- -1
System monitoring- -- Thermal Management- -- Wake On LANxx
Basic Alert On LAN II- -- Chipcard readerxx
Save to Disk (ACPI S4)xx
Save to RAM(ACPI S3)xx
Game/midi portxx
LAN onboardEthernet Contr. 82562ETEthernet Contr. 82562ET
Audio onboardAD1885AD1885
VGA onboardi 815i 815
USB ports extern22
USB ports intern21 - internal connector
1 - via CNR connector
2 - EnglishA26361-D1218-Z180-1-7619
The table shows two assembly versions of this system board as example.
FunctionVersion D1219-A1XVersion D1219-C1X
Processor socketPGA 370PGA 370
ProcessorIntel Celeron or Pentium IIIIntel Celeron or Pentium III
FormfactorATXATX
Front Side Bus in MHz66/100/13366/100/133
Chipset815e815e
Memory sockets3 DIMM3 DIMM
PCI slots55
AGP Port11
ISA slot- -1
System monitoringxx
Thermal Managementxx
Wake On LANxx
Features
Basic Alert On LAN IIxx
Chipcard readerxx
Save to Disk (ACPI S4)xx
Save to RAM(ACPI S3)xx
Game/midi portxx
LAN onboardEthernet Contr. 82562EMEthernet Contr. 82562EM
Audio onboardAD1885AD1885
VGA onboardi 815Ei 815E
USB ports extern22
USB ports intern22
A26361-D1218-Z180-1-7619English - 3
Mechanics
Mechanics
Layout System board D1218
ATX 12" x 8’’ (304,8 mm x 203.2 mm)
Some of the following connectors are optional and may therefore not be included on your system
board.
DIMM3
DIMM2
DIMM1
AGP / GPA
PCI 4
PCI 5
CNR
2314
1 = PS/2 Mouse Controller
2 = PS/2 keyboard port
3 = LAN port
4 = USB ports 1 and 2
5 = Serial Port 1
6 = Parallel Port
The components and connectors marked are not necessarily present on the system board.
4 - EnglishA26361-D1218-Z180-1-7619
Mechanics
r
15
14
13
DIMM 3
DIMM 2
DIMM1
21
4
3
56
7
8
9
10
AGP / GPA
PCI 4
PCI 1
PCI 3
PCI 2
PCI 5
CNR
1112
1 = Power Supply
2 = Serial chipcard reader interface or serial
port 2
3 = Floppy Disk Drive
4 = IDE drives 3 and 4 (secondary)
5 = IDE drives 1 and 2 (primary)
6 = Connector for control panel and
loudspeake
1 = Fan 2 (e. g. for the processor)
2 = USB port 4
3 = USB port 3
4 = CD audio input
5 = AUX audio input
6 = Fan 1 (e. g. for the processor)
7 = Power supply monitoring
8 = Cover monitoring
7 = Wake On LAN
The components and connectors marked are not necessarily present on the system board.
A26361-D1218-Z180-1-7619English - 5
Mechanics
Layout System board D1219
ATX 12" x 8’’ (304,8 mm x 203.2 mm)
Some of the following connectors are optional and may therefore not be included on your system
board.
DIMM3
DIMM2
DIMM1
AGP / GPA
ISA
PCI 5
2314
1 = PS/2 mouse port
2 = PS/2 keyboard port
3 = LAN port
4 = USB ports 1 and 2
5 = Serial port 1
6 = Parallel port
The components and connectors marked are not necessarily present on the system board.
6 - EnglishA26361-D1218-Z180-1-7619
Mechanics
r
15
14
13
DIMM 3
DIMM 2
DIMM1
21
4
3
56
7
8
9
10
AGP / GPA
PCI 1
PCI 2
PCI 4
PCI 3
ISA
PCI 5
1112
1 = Power supply
2 = Serial chipcard reader interface or serial
port 2
3 = Floppy disk drive
4 = IDE drives 3 and 4 (secondary)
5 = IDE drives 1 and 2 (primary)
6 = Connector for control panel and
loudspeake
1 = Fan 2 (e. g. for the processor)
2 = USB port 4
3 = USB port 3
4 = CD audio input
5 = AUX audio input
6 = Fan 1 (e. g. for the processor) *)
7 = Power supply monitoring
8 = Cover monitoring
7 = Wake On LAN
The components and connectors marked are not necessarily present on the system board.
*)only for speed controllable fans (3 pin connector), for 2 pin processor fans use Fan2 connector
only.
Main power supply+5.0 V±5 %15 A
Main power supply+12 V±10 %350 mA
Main power supply-12 V±10 %200 mA
Main power supply+3.3 V±5 %4 A
Auxiliary power supply+5.0 V±5 %2 A
Power loadability
Documentation
Fuse
number
1750 mAKeyboard portNot specified
2500 mAUniversal serial bus (USB) Port A500 mA
3500 mAUniversal serial bus (USB) Port B500 mA
Maximum fuse
current
FunctionMaximum function current
Mouse portNot specified
Game portNot specified
VGA connectorMinimum 50 mA
Documentation
Ê Insert the "Drivers & Utilities" CD.
Ê If the CD does not start automatically, run the START.EXE file in the main directory of the CD.
Ê Select your system board or your device.
Ê Select Documentation.
Ê Select - Technical Manuals
Ê Select - Technical Manuals (BIOS)
You may have to install the Acrobat Reader - Software on the CD-ROM
i
(path: utls/acrobat) before reading!
For more details please read the according readme.txt files.
Installing drivers
Ê Insert the "Drivers & Utilities" CD.
Ê If the CD doesn't start automatically call the START.EXE file in the main directory of the CD.
Ê If the system board list is displayed select the system board or select under Driver the
operating system used and the audio and video drivers.
A26361-D1218-Z180-1-7619English - 15
Upgrading main memory
Upgrading main memory
Support:The system needs at least one module.
Size:From 32 Mbytes up to 512 Mbytes SDRAM
Technology:PC100 or PC133 unbuffered DIMM modules.
168 pin, 3.3 V, 64 bit, 72 bit (with ECC), SDRAM
2 M, 4 M, 8 M, 16 M and 32 M x 64 bit
2 M, 4 M, 8 M, 16 M and 32 M x 72 bit
Granularity:For one socket 16, 32, 64, 128, 256 or 512 Mbyte
SDRAM modules with ECC can be plugged in but ECC is not functioning. Mix of
ECC modules with non ECC modules is possible.
Support for up to 2 single sided or 2 double sided DIMM modules.
Mix of PC100 and PC133 DIMMs is possible, but all modules will only work at PC100
speed.
Troubleshooting
Message BIOS update
The System BIOS provides optimum support for the processor you have chosen. If the message
BIOS update for installed CPU failed
appears the microcode required for the processor inserted must still be loaded. Further information
on this is available in the "BIOS Setup" manual on the "Drivers & Utilities" CD provided.
The screen stays blank
If your screen stays blank this may have the following cause:
The wrong RAM memory module has been inserted
Ê See the chapter "Main Memory" for information which memory modules can be used.
ACPI S3 (Save-to-RAM) and/or ACPI S4 (Save-to-Disk) doesn't work
This system board is fully compliant for ACPI S3 and S4. Therefore it is PC99 certified by Microsoft.
If you have any problems with ACPI please ensure that all of your components are supporting
ACPI S3 and S4.
− Operating system
− Hardware and drivers of controllers (e. g. VGA, audio, LAN, SCSI controllers).
For further information please refer to http://developer.intel.com/technology/iapc/involve.htm .
16 - EnglishA26361-D1218-Z180-1-7619
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.