Fujitsu Siemens Computers D1215, D1214 Technical Manual

COMPONENT

.com Additional Technical Manual

System board D1215 / D1214

Are there ...

... any technical problems or other
questions you need cl ari fied?

Please contact :

· Our Hotline:

Mo-Fr: 8 a.m. - 6 p.m.
Sat: 9 a.m. - 2 p.m.
Tel.: ++49 (0) 180 3777 005

· your sales outlet
The latest informat i on on our products, tips, updates, etc., can be found on the Internet under:

http://www.fujitsu-siemens.com/mainboard

Dieses Handbuch wurde auf Recycling-Papier gedruckt.
This manual has been printed on recycled paper.
Ce manuel est imprimé sur du papier recyclé.
Este manual ha sido impreso sobre papel reciclado.
Questo manuale è stato stampato su carta da riciclaggio.
Denna handbok är tryckt på recyclingpapper.
Dit handboek werd op recycling-papier gedrukt.

Herausgegeben von/Published by

Fujitsu Siemens Computers GmbH

Bestell-Nr./Order No.:
Printed in the Federal Republic of Germany
AG 0102 01/02

A26361-D1215-Z181-1-7619

A26361-D1215-Z181-1-7619

System Board
D1215/D1214

Additional Technical Manual

January 2002 edition

Intel, Pentium and Cel eron are regi stered trademarks of Intel Corporation, USA.

Microsoft, MS, MS-DOS and Windows are registered trademarks of Microsoft Corporation.
PS/2 and OS/2 Warp are registered trademarks of Int ernational Business M achines, Inc.
Magic Packet i s a registered trademark of A dvanced Micro Devic es, Inc.
Rambus, RDRAM, and t he Ram bus Logo are registered trademarks of Rambus Inc. Di rect

Rambus, RIMM, S O -RIMM, and Direct RDRAM are trademarks of Rambus Inc.

All other trademarks referenced are trademarks or regi stered trademarks of their respective

owners, whose protect ed ri ght s are acknowledged.

Copyright ã Fujitsu Siemens Computers Gm bH 2002

All rights, including rights of translation, reproduction by printing, copying or similar methods,
even of parts are reserv ed.

Offenders will be liable for damages.
All rights, including rights created by patent grant or regis tration of a utility model or design,

are reserved. Delivery subject to availability.

Right of technic al m odi fication reserved.

Contents

Introduction........................................................................................................................................1

Features............................................................................................................................................2

Mechanics.........................................................................................................................................3

Connectors................................................................................................................................5

Power supply monitoring....................................................................................................5

Intrusion connector for case open detect for optional push-button (opener).......................5

Serial port 2 (COM 2).........................................................................................................6

Front panel connector........................................................................................................7

Fan 2 connector.................................................................................................................8

Wake On LAN (WOL) connector........................................................................................8

USB port C / D 1 - Dual channel........................................................................................8

CD-ROM audio connector (internal)...................................................................................9

Auxiliary (MPEG, TV) audio connector (internal)................................................................9

Fan 1 connector.................................................................................................................9

Configuration...........................................................................................................................10

Functions controlled by the configuration switch..............................................................10

Power......................................................................................................................................10

Power requirement...........................................................................................................10

Power loadability..............................................................................................................10

Documentation ................................................................................................................................11

Installing drivers............................................................................................................................... 11

Upgrading main memory..................................................................................................................11

Troubleshooting...............................................................................................................................12

Message BIOS update.............................................................................................................12

The screen stays bl ank............................................................................................................12

A26361-D1215-Z181-1-7619

Introduction

Depending on the configuration of your system board, some of the hardware component s

i

described may not be av ai l abl e.

You may find further i nformation e. g. in the c om pl ete Technical Manual for t he system board and in
the description "B IOS Setup".

Further information to dri vers is provided on the s uppl i ed dri vers diskettes or on the

"Drivers & Utilities" or "S erv erS tart" CD. For detailed information please look at chapter "Installing
drivers". The latest BIOS versi on or dri vers can be found on the internet under
http://www.fujitsu-siemens.com/en/service.

Computer system boards and components cont ai n very delicate IC c hi ps. To protect them

!

against damage caused by static elect ri city, you mus t follow these precaut i ons:

· Use a grounded wrist strap.

· Unplug your computer before y ou rem ove any part of the cas i ng.

· Place the system board and the components on a grounded antistatic pad whenever

you remove them from the computer.
Hold components by t he edge, do not touch any pins or connectors on them.
Once you have installed the system board, you should remove the battery prot ection (i.e.

the thin plastic plate between battery and c ontact spring).

A26361-D1215-Z181-1-7619 English - 1

Features

Features

The table shows two assembly versions of this system board as example.

Features

Chipset Intel 815E
Board Size m-ATX m-ATX
VGA onboard (Intel 815E) üü
Audio onboard (AC '97) üü
LAN onboard / with Alert-on-LAN ü / - ü / ü
Thermal Management onboard - ü
System Monitoring onboard - ü
Fujitsu Siemens Keyboard Power Button Support - ü

Buzzer onboard / int. Speaker Support ü / - - / ü

Internal Connectors

DIMM Sock ets (SDRAM) 2 2
AGP Slot (1/2/4x, 32Bit, 66 MHz) 1 1
PCI Slots (32Bi t, 33 MHz, 5 V and 3.3 V) 3 3
ISA Slot - ­ACR Slot - ­AMR Slot - ­IDE Interfaces (Ultra DMA/100) 2 2
Floppy Interface (up t o 2. 88 M B) 1 1
CD / AUX Audio Input 1 / 1 1 / 1
Wake-on-LAN 1 1
Int. Serial Port / with SmartCard Support 1 / ü 1 / ü

USB Connectors int. / shared with CNR 2 / - 2 / -

D1214-A D1215-A

External Connectors D1214-A D1215-A

VGA 1 1

Audio Mic. / in / out (2 x 0.5 W / 8 W)11

Game/MIDI 1 1

LAN (RJ-45) 1 1

PS/2 Mouse/Keyboard 1 1

Ext. Serial Port (FIFO, 16550 compatible) 1 1

Parallel Port (EPP/ECP) 1 1

USB Connectors external 2 2

2 - English A26361-D1215-Z181-1-7619

Mechanics

Mechanics

Layout

mATX 9.6" x 8’’ (243.84 mm x 203.2 mm)
Some of the following connectors are optional and m ay therefore not be included on your system

board.

123

4

1 = PS/2 mouse port
2 = PS/2 keyboard port
3 = LAN port
4 = USB ports A and B
5 = Parallel port
6 = Serial port 1

The components and connectors marked are not necessarily present on the system board.

5

6

7

7 = VGA port
8 = Game/Midi port

9a = Audio Line-Out
9b = Audio Line-In

9c = Audio Micro-In

8

9a9b9c

Headphones

A26361-D1215-Z181-1-7619 English - 3

Mechanics

14
13

12

DIMM 2

DIMM 1

21

3

4

56

8

7

9

AGP / GPA

PCI 1

PCI 2

PCI 3

1011

1 = Power supply
2 = Serial port 2
3 = Floppy disk drive
4 = IDE drives 3 and 4 (secondary)
5 = IDE drives 1 and 2 (primary)
6 = Connector for control panel
7 = Fan 2 (e. g. for the system fan -

8 = Wake On LAN
9 = USB ports C / D
10 = CD audio input
11 = AUX audio input
12 = Fan 1 (e. g. for the processor)
13 = Power supply monitori ng
14 = Cover monitoring

supervised) *

The components and connectors marked are not necessarily present on the system board.
*) only for speed control l abl e fans (3 pin connector), f o r 2 pi n processor fans use Fan2 c onnector

only.

4 - English A26361-D1215-Z181-1-7619

Mechanics

Connectors

!

Power supply monitoring

Pin Signal

Some of the followi ng connectors are optional!

1

1 Monitor on
2 PS FAN control (low asserted)
3 PS FAN full on (low as serted)
4 PS FAN pulse
5SMB CLK
6SMB DATA
7 VCC EEPROM
8GND

Intrusion connector for case open

1

detect for optional push-button
(opener)

Pin Signal

1GND
2 Case open (low asserted)
3 Intrusion swit ch present (low asserted)

A26361-D1215-Z181-1-7619 English - 5

Mechanics

Serial port 2 (COM 2)

2

external via optional cable

1

Pin Signal Pin Signal

1 Sleep LED (Cathode) 2 Speaker
3 Sleep LED (Anode) 4 Key
5Key6GND
7 PowerON_LED (Anode) 8

9 PowerON_LED (Anode) 10 Key pin
11 PowerON_LED (Cathode) 12 Key pin
13 Message LED (Anode) 14 Key
15 Message LED (Cathode) 16 Not connected
17 Key 18 SCSI LED input (low asserted)
19 HD_LED (Anode) 20 SCSI LED input (low asserted)
21 HD_LED (Cathode) 22 Not connected
23 GND 24 Key
25 Power button (low asserted) 26 GND

2)

27

Sleep button (low ass ert ed) 28 GND

29 Reset button (low asserted) 30 GND

1)

VCC or GND

1) Pi n 8 i s connected to VCC if audio is not onboard.
Pin 8 is connect ed t o GND if audio is onboard.

2) The sl eep button (optional) functi ons only for operating systems with APM (not with ACPI).

6 - English A26361-D1215-Z181-1-7619

Mechanics

Front panel connector

HD-LED

Message LED

1)

Power On/Off

1)

Reset

1)

Sleep

1) Cable is not included in the delivery scope.

2) The same interface

3) 2pin or 3pin connector possible

SCSI LED Input

1)

Power On LED

2)1)
Speaker

1) 3)

1
2

2)

Pin Signal Pin Signal

1 Sleep LED (Cathode) 2 Not connected
3 Sleep LED (Anode) 4 Key
5Key6GND
7 PowerON_LED (Anode) 8

1)

VCC or GND

9 PowerON_LED (Anode) 10 Key pin
11 PowerON_LED (Cathode) 12 Key pin
13 Message LED (Anode) 14 Key
15 Message LED (Cathode) 16 Not connected
17 Key 18 SCSI LED input (low asserted)
19 HD_LED (Anode) 20 SCSI LED input (low asserted)
21 HD_LED (Cathode) 22 Not connected
23 GND 24 Key
25 Power button (low asserted) 26 GND

2)

27

reserved 28 GND

29 Reset button (low asserted) 30 GND

1) Pi n 8 i s connected to VCC if audio is not onboard.
Pin 8 is connect ed t o GND if audio is onboard.

2) The sl eep button (optional) functi ons only for operating systems with APM (not with ACPI).

!

Do not connect an internal speaker if a buzzer is onboard.

A26361-D1215-Z181-1-7619 English - 7

Mechanics

Fan 2 connector

1

(system fan - supervised)

Pin Signal

1GND
2 +12 V
3 Fan sense

Wake On LAN (WOL) connector

1

Pin Signal

1 V CC Auxiliary
2GND
3 Wake pulse (high assert ed)

USB port C / D 1 - Dual channel

7

1

14

(internal or external vi a special wire)

17

12

Pin Signal Pin Signal Pin Signal

1 VCC Dual / VCC (fused

7 S hi eld GND 13 Key

max. 500mA and power

supervision wit h over

current detection)
2 Data negative (port C) 8 GND 14 GND
3

Data positive (port C)

9 Data posit i ve (port D) 15 Data positive (port C)

4 GND 10 Data negative (port D) 16 Data negative (port C)
5 Shield GND 11 VCC Dual / VCC (fused

max. 500mA and power

supervision wit h over

current detection)

6 Key 12 Power supply on (CCR

17 VCC Dual (fused max.

500mA and power

supervision wit h over

current detection)

18 Key

on)

(max. 1 second low

pulse)

8 - English A26361-D1215-Z181-1-7619

Mechanics

CD-ROM audio connector (internal)

1

Pin Signal

1 Left CD audio input
2 CD GND
3 CD GND
4 Right CD audio input

Auxiliary (MPEG, TV) audio
connector (internal)

Pin Signal

1 Left AUX audio input
2 Analog GND
3 Analog GND
4 Right AUX audio input

Fan 1 connector

1

1

Pin Signal

1GND
2 Controlled fan voltage (0 V / 6...12 V)
3 Fan sense

A26361-D1215-Z181-1-7619 English - 9

Mechanics

Configuration

Functions controlled by the configuration switch

Function SKP RCV FWP PSS

Password skip on X X X

Off off X X X

Recovery BIOS X on X X

Off X off X X

Floppy write protect X X on X

Off X X off X

Low auxiliary power supply (<2 A) X X X on

High auxiliary power supply X X X off

PSS must be switched on for systems with not enough 5 V auxiliary power for all its self powered
wake devices (Wak eOnLA N, USB, PCI) in S3-S4.

Power

Power requirement

Source Voltage Maximum variation Maximum current Comment

Main power supply +5.0 V ±5 % 15 A
Main power supply +12 V ±5 % 350 mA
Main power supply -12 V ±10 % 200 mA
Main power supply +3.3 V ±5 % 4 A

Auxiliary power supply +5.0 V ±5 % 2 A

Power loadability

Fuse

number

1 750 mA Keyboard port Not specified

2 500 mA Universal serial bus (USB ) Port A 500 mA
3 500 mA Universal serial bus (USB ) Port B 500 mA

Maximum fuse

current

Function Maximum function current

Mouse port Not specified

Game port Not specified

10 - English A26361-D1215-Z181-1-7619

Documentation

Documentation

Ê Insert the "Drivers & Utilities" CD.
Ê If the CD does not start automati cally, run the START.EXE fil e i n the main directory of the CD.
Ê Select your system board or your device.
Ê Select Documentation.
Ê Select - Technical Manuals
Ê Select - Technical Manuals (BIOS)

You may have to ins tall the Acrobat Reader - Software on the CD-ROM

i

(path: utls/ac robat) before reading!
For more details please read t he according readme.txt f i les.

Installing drivers

Ê Insert the "Drivers & Utilities" CD.
Ê If the CD doesn't start automat i cally call the START.EXE file in the main directory of the CD.
Ê If the system board list is displayed select the system board or selec t under Driver the

operating system used and the audio and video drivers.

Upgrading main memory

Support: The system needs at least one module.
Size: From 32 Mbytes up to 512 Mbytes SDRAM
Technology: PC100 or PC133 unbuffered DIMM modules.

168 pin, 3.3 V, 64 bit, 72 bit (with ECC), SDRAM
2 M, 4 M, 8 M, 16 M and 32 M x 64 bit
2 M, 4 M, 8 M, 16 M and 32 M x 72 bit

Granularity: For one socket 16, 32, 64, 128, 256 or 512 Mby t e

SDRAM modules wit h ECC can be plugged in but ECC is not functioning. Mi x of
ECC modules with non ECC m odul es is possible.

Mix of PC100 and PC133 DIMMs is possible, but all modules will only work at P C100
speed.

A26361-D1215-Z181-1-7619 English - 11

Troubleshooting

Troubleshooting

Message BIOS update

The System BI OS provides optimum support for the processor you hav e chosen. If the message

BIOS update for installed CPU failed

appears the microcode required for the proc essor inserted must st ill be loaded. Further information
on this is available in the "BIOS Set up" manual on t he "Drivers & Utilities" CD provided.

The screen stays blank

If your screen s t ays blank this m ay have the following cause:

The wrong RAM memory module has been inserted

Ê See the chapter "Main Memory" for information which memory m odul es can be used.

ACPI S3 (Save-to-RAM) and/or ACPI S4 (Save-to-Disk) d o esn ' t wo rk
This system board is fully compliant f or A CPI S3 and S4. Therefore it i s PC99 certified by M i crosoft.
If you have any problem s with ACPI please ensure that all of your c om ponents are supporting

ACPI S3 and S4.

- Operating system

- Hardware and drivers of control l ers (e. g. audio, SCSI controllers).

For further information pl ease refer to http://developer.intel.com/technology/iapc/involve.htm.

12 - English A26361-D1215-Z181-1-7619