Fujitsu Siemens Computers D1171 Technical Manual

Download

Page 1

ADDITIONAL TECHNICAL

ADDITIONAL TECHNICALADDITIONAL TECHNICAL

MANUAL

MANUALMANUAL

SYSTEM BOARD D1171

SYSTEM BOARD D1171SYSTEM BOARD D1171

Page 2

Is there ...

... any technical problem or other question you need clarified?

Please contact:

• Our Hotline:

Mo-Fr: 8 a.m. - 6 p.m. Sat: 9 a.m. - 2 p.m. Tel.: ++49 (0) 180 3777 005

• your sales outlet

The latest information on our products, tips, updates, etc., can be found on the Internet under:

http://www.fujitsu-siemens.com

Page 3

Page 4

Dieses Handbuch wurde auf Recycling-Papier gedruckt. This manual has been printed on recycled paper. Ce manuel est imprimé sur du papier recyclé. Este manual ha sido impreso sobre papel reciclado. Questo manuale è stato stampato su carta da riciclaggio. Denna handbok är tryckt på recyclingpapper. Dit handboek werd op recycling-papier gedrukt.

Herausgegeben von/Published by Fujitsu Siemens Computers GmbH

Bestell-Nr./Order No.: Printed in the Federal Republic of Germany AG 0100 01/00

A26361-D1171-Z180-1-7619

A26361-D1171-Z180-4-7619

A26361-D1171-Z180-4-7619A26361-D1171-Z180-4-7619

Page 5

System Board D1171

Additional Technical Manual

January 2000 edition

Page 6

Intel, Pentium and Celeron are registered trademarks and MMX and OverDrive are trademarks of Intel Corporation, USA.

Microsoft, MS, MS-DOS and Windows are registered trademarks of Microsoft Corporation. PS/2 is a registered trademark of International Business Machines, Inc. All other trademarks referenced are trademarks or registered trademarks of their respective

owners, whose protected rights are acknowledged.

All rights, including rights of translation, reproduction by printing, copying or similar methods, even of parts are reserved.

Offenders will be liable for damages. All rights, including rights created by patent grant or registration of a utility model or design,

are reserved. Delivery subject to availability. Right of technical modification reserved.

Page 7

Contents

Introduction........................................................................................................................................1

Features............................................................................................................................................2

Mechanics.........................................................................................................................................3

Connectors................................................................................................................................5

Serial chipcard reader or internal serial port 2 (COM 2).....................................................5

Front panel connector........................................................................................................6

USB chipcard reader ......................................................................................................... 7

Fan 2 connector.................................................................................................................7

Wake On LAN (WOL) connector........................................................................................7

CD-ROM audio connector (internal)...................................................................................8

Auxiliary (MPEG, TV) audio connector (internal)................................................................8

Fan 1 connector.................................................................................................................9

Power supply monitoring....................................................................................................9

Intrusion connector for case open detect for optional push-button (opener).......................9

Configuration...........................................................................................................................10

Functions controlled by the switch block..........................................................................10

USB power ......................................................................................................................10

Power......................................................................................................................................11

Power requirement .......................................................................................................... 11

Power loadability..............................................................................................................11

Documentation................................................................................................................................11

Installing drivers ..............................................................................................................................11

Upgrading main memory .................................................................................................................12

Troubleshooting...............................................................................................................................12

Message BIOS update.............................................................................................................12

The screen stays blank............................................................................................................12

A26361-D1171-Z180-4-7619

Page 8

Page 9

Introduction

This system board is available in different configuration levels. Depending on the

You may find further information e. g. in the complete Technical Manual for the system board and in the description "BIOS Setup".

Further information to drivers is provided on the supplied drivers diskettes or on the "Drivers & Utilities" or "ServerStart" CD. For detailed information please look at chapter "Installing drivers".

hardware configuration of your device, it may be that you cannot find several options in

your version of the system board, even though they are described.

A26361-D1171-Z180-4-7619 English - 1

Page 10

Features

The table shows two assembly versions of this system board as example.

Function Version D1171-A Version D1171-B

Processor socket PGA 370 PGA 370 Processor Intel Celeron or Pentium III Intel Celeron or Pentium

III Formfactor Front Side Bus in MHz 66/100/133 66/100/133 Chipset i810e i810e Memory sockets 2 DIMM 2 DIMM ISA slots - - - PCI slots 4 4 ISA/PCI shared - - - AGP-Port - - - System monitoring x x Thermal Management x x Wake On LAN x x Keyboard On x x IrDA - - - Chipcard reader x x Save to Disk (ACPI S4) x x Save to RAM(ACPI S3) x x

ATX

LAN onboard x - Audio onboard AD 1881 AD 1881 VGA onboard i 810e i 810e

4MB Display Cache x x

Computer system boards and components contain very delicate IC chips. To protect them

against damage caused from electric static, you have to follow some precautions:

• Unplug your computer when you work inside.

• Hold components by the edge, don't touch their leads.

• Use a grounded wrist strap.

Place the system board and the components on a grounded antistatic pad whenever you work outside the computer.

Once you have installed the system board, you should remove the battery protection (i.e. the thin plastic plate between battery and contact spring).

2 - English A26361-D1171-Z180-4-7619

Page 11

Mechanics

Layout

µ-ATX 9,6" x 8'' (243,84 mm x 203,2 mm) Some of the following connectors are optional and may therefore not be included on your system

board.

DIMM 2 DIMM 1

PCI 1

PCI 3

PCI 2

PCI 4

21 3 4 5 6

1 = PS/2 mouse port 2 = LAN port 3 = Serial port 1 4 = Parallel port 5 = VGA connector 6 = Game/Midi port

10911 12

7 = PS/2 keyboard port 8 = USB port B 9 = USB port A 10 = Audio line-out 11 = Audio line-in 12 = Audio micro-in

The components and connectors marked do not have to be present on the system board.

A26361-D1171-Z180-4-7619 English - 3

Page 12

Mechanics

16 15

DIMM 2 DIMM 1

34 5 6

8 9

PCI 1

PCI 3

PCI 2

PCI 4

1011

1 = Serial chipcard reader or serial port 2 2 = Power supply 3 = IDE drives 3 and 4 (secondary) 4 = Floppy disk drive 5 = Front panel and loudspeake 6 = IDE drives 1 and 2 (primary) 7 = USB chipcard reade 8 = Fan 2 (e. g. for the processor)

The components and connectors marked do not have to be present on the system board.

9 = Wake On LAN 10 = CD audio input 11 = AUX audio input 12 = USB power jumpe 13 = Voltage indicator LED 14 = Fan 1 (e. g. for the processor) 15 = Power supply monitoring 16 = Intrusion detection

4 - English A26361-D1171-Z180-4-7619

Page 13

Connectors

Some of the following connectors are optional!

Mechanics

Serial chipcard reader or internal

serial port 2 (COM 2)

external via optional cable

Pin Signal Pin Signal

1 DCD 2 2 DSR 2 3 SIN 2 4 RTS 2 5 SOUT 2 6 CTS 2 7 DTR 2 8 PC_On_Strobe

9 GND 10 VCC Auxiliary 11 Not connected 12 VCC 13 RESET (high asserted) 14 GND 15 GND 16 Key

A26361-D1171-Z180-4-7619 English - 5

Page 14

Mechanics

Front panel connector

HD-LED

MessageLED

Power On/Off

Reset

Sleep

1) Cable is not included in the delivery scope.

2) The same interface

3) 2pin or 3pin connector possible

SCSI LED Input

Power On LED

2)1) Speaker

Pin Signal Pin Signal

1 Not connected 2 Speaker 3 Standby LED (Anode) 4 Key 5 Key 6 GND 7 PON_LED (Anode) 8

VCC or GND

9 PON_LED (Anode) 10 Key pin

11 PON_LED (Cathode/GND)

12 Key pin

Standby LED (Cathode/GND) 13 Message LED (Anode) 14 Key 15 Message LED (Cathode) 16 Not connected 17 Key 18 SCSI LED input (low asserted) 19 HD_LED (Anode) 20 SCSI LED input (low asserted) 21 HD_LED (Cathode) 22 Not connected 23 GND 24 Key 25 Power button (low asserted) 26 GND

Sleep button (low asserted) 28 GND

29 Reset button (low asserted) 30 GND

1)3)

1 2

1) Pin 8 is connected to VCC if audio is not onboard. Pin 8 is connected to GND if audio is onboard.

2) The sleep button (optional) functions only for operating systems with APM (not with ACPI).

6 - English A26361-D1171-Z180-4-7619

Page 15

USB chipcard reader

Pin Signal Pin Signal

1 P3V3P_DUAL 2 VCC 3 Data negative up 4 Data positive up 5 Data negative down 6 Data positive down 7 GND 8 GND

9 Not connected 10 VCC auxiliary 11 P3V3P 12 Power OK (high asserted) 13 Chipcard reader On (low pulse) 14 Key

Mechanics

Fan 2 connector

Pin Signal

1 GND

2 +12 V

3 Fan sense

Wake On LAN (WOL) connector

Pin Signal

1 VCC Auxiliary

2 GND

3 Wake pulse (high asserted)

A26361-D1171-Z180-4-7619 English - 7

Page 16

Mechanics

CD-ROM audio connector (internal)

Pin Signal

1 Left CD audio input 2 CD GND 3 CD GND 4 Right CD audio input

Auxiliary (MPEG, TV) audio connector (internal)

Pin Signal

1 Left AUX audio input 2 Analog GND 3 Analog GND 4 Right AUX audio input

8 - English A26361-D1171-Z180-4-7619

Page 17

Mechanics

Fan 1 connector

Pin Signal

1 GND

2 Controlled fan voltage (0 V / 6...12 V)

3 Fan sense

Power supply monitoring

Pin Signal

1 Monitor on

2 PS FAN off request (low asserted)

3 PS FAN full on (low asserted)

4 PS FAN pulse

5 SMB CLK

6 SMB DATA

7 VCC EEPROM

8 GND

Intrusion connector for case open

detect for optional push-button (opener)

Pin Signal

1 GND

2 Case open (low asserted)

3 Intrusion switch present (low asserted)

A26361-D1171-Z180-4-7619 English - 9

Page 18

Mechanics

Configuration

Functions controlled by the switch block

Function SKP RCV FWP RES*

Password skip on X X off

Off off X X off

Recovery BIOS X on X off

Off X off X off

Floppy write protect X X on off

Off X X off off

*) Must be in "off" state.

USB power

USB power jumper

Pin Signal

1 VCC 2 USB power connection 3 VCC_AUX

Jumper 2-3 Default setting:

If the power supply supports auxiliary voltage the USB interface is permanently powered except when the main supply is plugged off.

Wakeup from ACPI S1-S4 state possible.

Jumper 1-2 The USB interface is only powered in operating state.

Wakeup from ACPI S1 state possible.

10 - English A26361-D1171-Z180-4-7619

Page 19

Power

Power requirement

Source Voltage Maximum variation Maximum current Comment

Main power supply +5.0 V ±5 % 15 A

Main power supply +12 V ±10 % 350 mA

Main power supply -12 V ±10 % 150 mA

Main power supply +3.3 V ±5 % 4 A

Auxiliary power supply +5.0 V ±5 % 2 A

Power loadability

Documentation

Fuse

number

1 750 A Keyboard port Not specified

2 750 mA Universal serial bus (USB) Port A 500 mA 3 750 mA Universal serial bus (USB) Port B 500 mA

Maximum fuse

current

Function Maximum function current

Mouse port Not specified

Game port Not specified

VGA connector Minimum 50 mA

Documentation

Ê Insert the "Drivers & Utilities" CD. Ê If the CD does not start automatically, run the START.EXE file in the main directory of the CD. Ê Select your system board or your device. Ê Select Documentation. Ê Select - Technical Manuals Ê Select - Technical Manuals (BIOS)

You may have to install the Acrobat Reader - Software on the CD-ROM (path:

utls/acrobat) before reading! For more details please read the according readme.txt files.

Installing drivers

Ê Insert the "Drivers & Utilities" CD. Ê If the CD doesn't start automatically call the START.EXE file in the main directory of the CD. Ê If the system board list is displayed select the system board or select under Driver the

operating system used and the audio and video drivers.

A26361-D1171-Z180-4-7619 English - 11

Page 20

Upgrading main memory

Support: The system needs at least one module and can manage at most two SDRAM

modules. Size: From 16 Mbytes up to 512 Mbytes SDRAM Technology: 100 MHz unbuffered DIMM modules.

168 pin, 3.3 V, 64 bit, 100 MHz SDRAM

2M,4M,8M,16Mand32Mx64bit Granularity: For one socket 16, 32, 64. 128 or 256 Mbyte

SDRAM modules with ECC can be plugged in but ECC is not functioning. Mix of

ECC modules with non ECC modules is possible.

Troubleshooting

Message BIOS update

The System BIOS provides optimum support for the processor you have chosen. If the message

BIOS update for installed CPU failed

appears the microcode required for the processor inserted must still be loaded. Further information on this is available in the "BIOS Setup" manual on the "Drivers & Utilities" CD provided.

The screen stays blank

If your screen stays blank this may have the following cause:

The wrong RAM memory module has been inserted

Ê See the chapter "Main Memory" for information which memory modules can be used.

ACPI S3 (Save-to-RAM) and/or ACPI S4 (Save-to-Disk) doesn't work

This system board is fully compliant for ACPI S3 and S4. Therefore it is PC98 certified by Microsoft. If you have any problems with ACPI please ensure that all of your components are supporting ACPI

S3 and S4.

− Operating system

− Hardware and drivers of controllers (e. g. VGA, audio, LAN, SCSI controllers).

The system board D1171 supports Save-to-RAM. Therefore the D1171 is certified by Intel

and Microsoft. This support must be also guaranteed by the operating system, the extension boards and the power supply. For the time neither Windows 98 1st edition nor Windows NT4.0 support this function reliably. Windows 98 SE and Windows 2000 will support ACPI S3. Unfortunately only a few extension boards work with functional Save-toRAM compliant drivers (refer to http://developer.intel.com/technology/iapc/involve.htm ).

12 - English A26361-D1171-Z180-4-7619