11-in-1 Card Reader
User Instructions
Card Reader
1
Introduction
The card reader, also known as the flash memory drive, is an
internal USB 2.0 11-in-1 drive which can be used for reading
and writing to memory cards of different types. It supports the
most common flash memories, including CompactFlash card
(type I and II), IBM Microdrive, SmartMedia card (3.3 V),
SecureDigital card, MultiMedia card and Memory Stick.
Features
• Four slots for CompactFlash Card (type I and II) (CF), IBM
Microdrive (MD), SmartMedia Card (3.3 V) (SM),
SecureDigital Card (SD), Mini-SecureDigital Card (Mini
SD), MultiMedia Card (MMC), Reduced-Size MultiMedia
Card (RS-MMC), Memory Stick (MS), Memory Stick Pro,
Memory Stick Duo, Memory Stick Pro Duo and
xD-Picture
Card
• LED displays for operational readiness and access
• Operating systems supported:
Windows 98SE / 2000 / Me / XP
• USB compatibility (USB 1.1, USB 2.0)
• Data transmission is possible simultaneously between
different Flash memory cards or with the PC.
Driver installation
Windows XP does not require a driver for this product. It uses
the driver integrated in Windows.
Card Reader
2
Configurations
1) Without USB connector
2) With USB connector
MS Memory Stick / Memory Stick Pro /
Memory Stick Duo / Memory Stick Pro
Duo
SD/MMC SecureDigital Card / MultiMedia Card /
Mini SecureDigital Card / Reduced-Size
MultiMedia Card
CF/MD CompactFlash Card / IBM Microdrive
SM SmartMedia Card (3.3 V) / xD Picture
Card
Access LED for memory access (ACCESS
LED)
LED for operational readiness
USB connector
Access
SM
CF/MD
MS
SD
(Slots)
xD
Access
SM
CF/MD
MS
SD
……...(Slots)
xD
Card Reader
3
Information on handling memory cards
• Memory Stick, Memory Stick Pro and SD cards are
inserted into the appropriate memory slot with the
contacts facing downwards.
• Smart Media cards and xD cards are inserted into the
SM or xD slot with the contacts facing upwards.
• With CompactFlash and Microdrive, please note that
these should be inserted in the corresponding slot with
the contacts facing forwards and the type label
upwards.
• Please note that MemoryStick Duo, MemoryStick
Pro Duo as well as RS-MMC and Mini-SD may only
be used with special adapters in the appropriate
slot. Do not insert these cards directly into a slot as
they will fall into the card reader. This may result in
damage to the reader and the memory card. The
required adapters are not supplied with the card
reader. They are often included with the purchase of
such memory cards.
Caution!
• If the ACCESS LED is flashed, please do not
remove a memory medium as data loss may
occur and the memory medium may be
irreversibly damaged.
• Do not use force, for the memory media can
be easily inserted in and also removed from
the intended slot.
Technical data
• Flash memory cards supported:
− CF slot for CF cards type I, type II and IBM Microdrive
− SM slot for SM cards (3.3 V)
− SD/MMC slot for SD cards and MMC cards
− Memory Stick slot for Memory Stick and Memory Stick Pro
− xD slot (integrated in SM slot) for xD Picture Card
• Interface: USB 2.0
Loading...