Fujitsu siemens PRIMERGY TX150 S7 Power and Performance Data Sheet
ENERGY STAR® Power and Performance Data Sheet
Mini
Typical
Maxi
PRIMERGY TX150 S7 E-StarFam2 (Quad-Core CPUs with hot plug PSU)
System Characteristics
Form Factor
Available Processor Sockets
Available DIMM Slots / Max Memory Capacity
ECC and/or Fully Buffered DIMMs
Available Expansion Slots
Minimum and Maximum # of Hard Drives
Redundant Power Supply Capable?
Power Supply Make and Model Chicony, HP-S4701E0 01LF
Power Supply Output Rating* (watts)
Minimum and Maximum # of Power Supplies
Input Power Range (AC or DC)
Power Supply Efficiency at Specified Loadings*
Power Supply Power Factor at Specified Loadings *
Operating Systems Supported
Installed Operating System for Testing
* Note: Power supply information is for a single pow e r supply only
1) Note: available March, 2010
Pedestal
1
6 / 32GB
ECC / no fully buffered DIMMs
5 PCIe and 1 PCI
0 to 8
Yes
470W
1 or 2
100-240V AC
79.6%@10%, 86.9%@20%, 90.9%@50%, 89.7%@100%
0.722@10%, 0.894@20%, 0.978@50%, 0.995@100%
Microsoft® W indows S er ver® 2008
Microsoft® W indows S er ver® 2003
Novell SUSE Linux Enterprise Server 10
Red Hat Enterprise Linux 5 (incl. XEN)
Microsoft Hyper-V Server 2008
MS Windows Server 2008 Enterprise Edition, Version 6.0.6002, SP2
1)
and 11 (incl. XEN)
System Configurations
Configuration ID
Processor Information
Memory Information
Internal Storage
I/O Devices
Power Supply Number and Redundancy Configuration 1 2 (1 redundancy) 2 (1 redundancy)
Management Controller or Service Process or Ins talled? Yes Yes Yes
Other Hardware Features / A c c essories
1x Intel® Xeon® X3430
1x 1Gbit Ethernet LAN
mum
4 cores, 2.40GHz
2GB (1x 2GB)
DDR3
1x 2.5" SAS HDD
146GB 15000RPM
Intel® 82574L
1 active port
8 port SAS RAID
Controller
DVD ROM
1x Intel® Xeon® X3430
4 cores, 2.40GHz
4GB (2x 2GB)
DDR3
2x 2.5" SAS HDD
2x 146GB 15000RPM
1x 1Gbit Ethernet LAN
Intel® 82574L
1 active port
8 port SAS RAID
Controller
DVD-ROM
1x Intel® Xeon® X3430
8x 146GB 15000RPM
1x 1Gbit Ethernet LAN
Controller with iBBU
mum
4 cores, 2.40GHz
32GB (4x 8GB)
DDR3
8x 2.5" SAS HDD
Intel® 82574L
1 active port
and
2x 1Gbit Dual Port
Ethernet LAN
Intel® Pro/1000PT
4 active ports
8 port SAS RAID
DVD ROM
ENERGY STAR Power and Performance Data Sheet
g
PRIMERGY TX150 S7 E-StarFam2 (Quad-Core CPUs with hot plug PSU)
Page 2 of 2
Power Data
Idle Category (1S and 2S only)
ENERGY STAR Idle Power Allowanc e ( 1S and 2S only) 65W 93W 203W
Measured Idle Power (watts) 51,2 70,7 112,6
Power at Full Load* (watts) 101,1 119,2 169,1
Benchmark / Method Used for Full Load Test
Test Voltage and Frequency for Idle and Full Load Test
Range of Total Estimated Energy Usage ** (kWh/year) 897 to 1771 1239 to 2088 1973 t o 2963
Link to Detailed Power Calculator (if available)
* Note: Full load power represents the sustained, average power at 100% load of the given workload, and does not necessarily represent the absolute peak power or the
highest average, sustained power possible for other workloads.
** Note: Estimated kWh/year gives the absolute range of energy use a user could expect from continuous operation (24x365) and ranges from 100% Idle usage to 100% full
load operation. The calculation also includes typical data center overhead at a ratio of 1 watt of overhead to every 1 watt of IT load (corresponding t o a P UE of 2 .0). Closer
approximations may be found by using established power calculator s a nd s pe c if ic inf ormation about the intended operating environment (e .g., average time at Idle, data
Power and Performance for Benchmark #1
Benchmark Used and Type of Workload
Avg. Power Measured During Benchmark Run 101,1W 119,2W 169,1W
Benchmark Performance Score 13.2MPixel/s 13.36MPixel/s 13.29MPixel/s
Power Performance Ratio
Link to Full Benchmark Report ( Where Available) N/A N/A N/A
Benchmark #1
(perf score/avg. power)
Minimum Typical Maximum
Category B: Managed Single Installed Processor (1P) Servers
SiSoftware Sandra Engineer 2009.SP3c , .Net Multimedia, Double x1
230V / 50Hz
http://ts.fujitsu.com/products/standard_servers/e_efficient.html
Minimum Typical Maximum
SiSoftware Sandra Engineer 2009.SP3c , .Net Multimedia, Double x1
0,13MPixel/s / W 0,11MPixel/s / W 0,079MPixel/s / W
Enabled on End-User Enabling
Power Saving Features
Processor Dynamic Voltage and Frequency Scaling
Processor or Core Reduced Power Stat es
Power Capping
Variable Speed Fan Control Based on Power or Thermal Readings
Low Power Memory States
Low Power I/O States
Liquid Cooling Capability
Shipment
x
x
x
Required
x
Power and Temperature Measurement and Reporting
Input Power Available & Accuracy?
Input Air Temp Available & Accuracy?
Processor Utilization Available?
Other Data Measurements Available & Ac c uracy?
Compatible Protocols for Data Collection
Averaging method and time period
Thermal Information *
Total Power Dissipation (wat ts) 107 130 176
Delta Temperature at Exhaust at Peak Temp. (˚C) 5-6 7 7-8
Airflow at Maximum Fan Speed (CFM) at Peak Temp.
Airflow at Nominal Fan Speed (CFM) at Nominal Temp.
* References: ASHRAE Extended Environmental Envelope Final August 1, 2008
Thermal Guidelines for Data Processing Environments , ASHRAE, 2004, ISBN 1-931862-43-5
Peak temperature is defined as 35 ˚C, Nominal Temperature is defined as 18 - 27 ˚C
Yes, +/- 5%
Yes, +/- 3°C
Yes
IPMI
Liniar Average calculation / 5 sec.
Minimum Typical Maximum
3
100m
/h 105m3/h 105m3/h
46m3/h 50m3/h 50m3/h
Loading...