Innovative technology7
Ports and controls9
Important notes13
First-time setup of your device16
Working with the notebook19
Security functions40
Connecting external devices44
Removing and installing components
during servicing49
Settings in BIOS Setup Utility57
Troubleshooting and tips59
Technical data66
Manufacturer’s notes68
Index74
Remarks
Information on the product description meets the design specifications of Fujitsu and
is provided for comparison purposes. Several factors may cause the actual results to
differ. Technical data is subject to change without prior notification. Fujitsu rejects any
responsibility with regard to technical or editorial mistakes or omissions.
Trademarks
Fujitsu, the Fujitsu logo and LIFEBOOK are registered trademarks of Fujitsu Limited
or its subsidiaries in the United States and other countries.
Microsoft and Windows are trademarks or registered trademarks of the Microsoft
Corporation in the United States and/or other countries.
Adobe Reader is a trademark of Adobe Systems Incorporated.
Sony and Memory Stick are registered trademarks of Sony Electronics, Inc.
FCC regulatory information for notebooks with radio device ............................. 72
Index .................................................................................. 74
Fujitsu5
Contents
6Fujitsu
Innovative technology
Innovative technology
... and ergonomic design make your device a reliable and convenient companion.
The device boots very quickly, is ready for immediate use and offers a particularly
long operating time because of its high capacity battery.
With the user-friendly "BIOS Setup Utility" you can control your notebook’s hardware and better
protect your system against unauthorised access by using the powerful password properties.
Information on the connections and user componen ts of your notebook
canbefoundin"
Ports and controls", Page 9.
Further information
The Windows drivers for your device can be found on our Internet site.
The factory installation of your device does not support any other operating
system. Fujitsu Technology Solutions accepts no liability whatsoever
if any other operating system is used.
Software oriented components of the se instructions refer to Microsoft products,
if they come within the scope of the delivery.
If you install other software products, pay attention to the operating
instructions of the manufacturer.
Fujitsu7
Innovative technology
Notational conventions
Pay particular attention to text marked with this symbol. Failure to observe
these warnings could pose a risk to h ealth, damage the device or lead
to loss of data. The warra nty will be invalidated if the device becomes
defective throu gh failure to observe these warnings.
Indicates important informa
tion for the proper use of the device.
►
This font
This font
This font
"This font"
Key
This font
Indicates an activity that must be performed
Indicates a result
indicates data entered
the command line, e.g.
start a program (star
indicates information that is displayed on the screen by a program, e.g.:
Installation is complete.
Indicates
•terms and texts used in a software interface, e.g.: Click on Save
•names of programs or files, e.g. Windows or setup.exe.
Indicates
•cross-references to another section, e.g. "Safety information"
•cross-references to an external source, e.g. a web address: For more
information, go to "
•Names of CDs, DVDs and titles or designations for other materials,
e.g.: "CD/DVD Drivers & Utilities" or "Safety/Regulations" manual
indicates a key on the keyboard, e.g:
indicates terms and texts that are emphasised or highlighted, e.g.: Do
not switch off the device
using the keyboard in a program dialogue or at
your password (Name123) or a command used to
t.exe)
http://www.fujitsu.com/fts/"
F10
8Fujitsu
Ports and controls
Ports and controls
This chapter presents the individual hardware components of your device. It gives an
overview of the indicators and connections of the device. Please familiarise yourself with
these components before you start to work with the device.
1 = Security Lock device
2 = LAN port
3 = VGA monitor port
4 = HDMI port
Right panel
12 3 4
1 = Headphone port
2 = Microphone jack
3=USBport2.0
4 = Optical drive (optional)
Even if your system is not equipped with the optional optical drive, the eject button and
the opening for the emergency eject are still present, but have no function.
5
6
7
5 = USB port 3.0
6 = USB port 3.0
7 = USB port 3.0 with charging function
(Anytime USB charge)
5
6
5 = Optical drive eject button (optional)
6 = Opening for manual ejection of data
carrier (optional)
7 = DC input connector (DC IN)
7
Fujitsu11
Ports and controls
Bottom
5
1 = Memory serv
2 = Hard disk service compartme nt
3 = Battery re
ice compartment
lease
1
4
4 = Battery com
5 = Battery release
2
3
partment
12Fujitsu
Important notes
ImportantnotesNotes
Safety notes
SafetynotesNotes
This chapter contains essential safety information which must be followed
when working with your notebook. Other notes also provide useful information
which will help you with your notebook.
Please follow the safety notes provided in the "Safety/Regulations" manual
as well as the safety notes given below.
Please pay special attention to the sections in the manual marked
with the symbol on the left.
When connecting and disconnecting cables, observe the relevant
notes in this operating manual.
Read the information on the ambient conditions in the "
Page 66 and "First-time setup of your device", Page 16 before preparing your
notebook for use and sw itching it on for the first time.
When cleaning the device, please observe the relevant notes in the
section "
Pay attention to the additional safety notes for devices with radio components
provided in the "Safety/Regulations" manual.
Please refer to the notes in the chapter "
components during servicing", Page 49.
Cleaning the notebook", Page 15.
Important notes
Technical data",
Removing and installing
This notebook
equipment. I
please conta
complies with the relevant safety regulations for data processing
f you have questions about using your notebook in a particular area,
ct your sales outlet or our Hotline/Service Desk.
Additional safety notes for devices with
radio components
Radiocomponent:WirelessLAN:Bluetooth,safetynotes
If a radio component (Wireless LAN, Bluetooth, UMTS) is integrated in your notebook, you
must be sure to observe the following safety notes when using your notebook:
•Switch off the radio components when you are in an aircraft or driving in a car.
•Switch off the radio components when you are in a hospital, an operating room or near a medica l
electronics system. The transmitted radio waves can impair the operation of medical devices.
•Switch off the radio components when you let the device get near flammable
gases or into hazardous environments (e.g. petro l station, paintshops), as the
transmitted radio waves can cause an explosion or a fire.
For information on how to switch radio components on and off, see chapter
Switching the wireless components on and off", Page 38.
"
Fujitsu13
Important notes
Energy saving
NotesEnergyEnergysaving
Switch the notebook off when it is not in use. Switch off external, connected devices if you
are not using them. If you use the e nergy saving functions, the notebook uses less energy.
You will then be able to work for longer before having to recharge the battery.
Energy efficiency is increased and the environmental impact is reduced.
You save money while protecting the environment.
Energy saving under Windows
► Make use of the power management features (see ""Using the power-managemen t features",
Page 36").
Travelling w ith you
MobileoperationNotesTrans portationNotebook
Please observe the points listed below when travelling with your notebook.
rnotebook
Before you travel
► Back up important data stored on your hard disk.
NotebookTravel,notebook
► Switch off the radio component for data security reasons. With data traffic via a wireless
connection, it is also possible for unauthorised third parties to receive data.
Information on activating data encryption is provided in the documentation
for your radio component.
► If you wish to use your notebook during a flight, first check with the flight
attendants if it is OK to do so.
When travelling in other countries
► If you are travelling abroad, check that the mains adapter can be operated with the
local mains voltage. If this is not the case, obtain the appropriate mains adapter for
your notebook. Do not use any other voltage converter!
► Check whether the local mains voltage and the power cable are compatible. If this is
not the case, buy a power cable that matches the local conditions.
► Enquire with the corresponding govern m ent office of the country you will be
travelling in as to whether you may operate the radio component integrated in
your notebook there (see also "
CE marking", Page 68).
14Fujitsu
Important notes
Notebook: transporting
Protect the notebook from severe shocks and extreme temperatures
(e.g. direct sunlight in a car).
► If your device has an optical drive, remove all data media (e.g. CD, DVD) from the drives.
TransportationNotebo ok
► Switch the notebook off.
► Unplug the mains adapter and all external devices from the power socket.
► Disconnect the mains adapter cable and the data cables for all external devices.
► Close the LCD screen.
► To protect against damaging jolts and bumps, use a notebook carrying
case to transport your notebook.
Cleaning the notebo
ok
Do not clean any interior parts yourself; leave this job to a service technician.
Only use cleaning products designed for computers. Normal household
cleaners and polishes can damage the markings on the keyboard and the
device, the paintwork or the notebook itself.
Ensure that no liquid enters the notebook.
The LCD screen very sensitive to scratches. Only clean the display
surface with a very soft, slightly damp cloth.
► In order to prevent accidentially switching the device on, remove the power cable from the mains
adaptor and remove the battery (see "
The surface c
been moiste
an be cleaned with a dry cloth. If particularly dirty, use a cloth which has
ned in mild domestic detergent and then carefully wrung out.
Removing and installing the bat tery", Page 31).
To clean the keyboard and the touchpad, if available, you can use disinfectant wipes.
Ensure that no liquid enters the device.
Fujitsu15
First-time setup of your device
First-time setup of your devic
First-timesetu pGettingstarted
On delivery, the battery can be found in the battery compartment or in the accessories kit.
The battery must be charged if you w ant to operate your device using the b attery.
When u sed on the move, the built-in battery provides the device with the necessary power. You
can increase the operating time by using the available energy-saving functions.
For instructions on how to connect external devices (e.g. mouse, printer) to your
device, please refer to the operating manual for your device.
Unpacking and
► Unpack all the individual parts.
► Check your
Please read the chapter "Important notes", Page 13.
If your device is equipped with a Windows operating system, the necessary
hardware drivers and supplied software are already pre-installed.
Before you switch on the device for the first time, connect it to the mains voltage
using the mains adapter, see "
adapter must be connected during the entire installation process.
A system test is performed when your device is first switched on. Various messages
can appear. The display may remain dark for a short time or may flicker.
Please follow the instructions on the screen.
NEVER switch off your device during the first-time setup process.
Mains adapter connecting", Page 17.Themains
checking the device
Should you discover any damage that occurred during transportation,
notify your local sales outlet immediately!
PackagingTransport
device for any visible damage which may have occurred during transportation.
e
You m a y n e
16Fujitsu
ed the packaging in the future, if you need to transport your device.
Selecting a location
SelectingalocationDeviceM ainsadapter
Select a suitable location for the device before setting it up. F ollow
the instructions below when doing so:
•Never place the device or the mains adapter on a heat-sensitive surface.
The surface could be damaged as a result.
•Never place the device on a soft surface (e.g. carpeting, upholstered furniture,
bed). This can block the air vents and cause overheating and damage.
•The underside of the device heats up during normal operation. Prolonged contact
with the skin may become unpleasant or even result in burns.
•Place the device on a stable, flat, non-slippery surface. Please note that the
rubber feet of the device may mark certain types of delicate surfaces.
•Keep other objects at least 100 mm away from the device and its
mains adapter to ensure adequate ventilation.
•Never cover the ventilation slots of the device.
•Do not expose the device to extreme environmental conditions. Protect
the device from dust, humidity, and heat.
Mains adapter connecting
PreparingforoperationMainsadapter
Observe the safety notes in the enclosed "Safety/Regulations" manual.
If the mains adapter is connected, you may feel a slight tingling when you touch
the top of the aluminium housing. The combination of a mains adapter without
protective earth and metallic housing parts causes a very weak electrical current.
This effect is harmless. The device meets all relevant safety standards.
The supplied power cable conforms to the requirements of the country in
which you purchased yo ur device. Make sure that the power cab le is approved
for use in the country in which you intend to use it.
First-time setup of your device
► Connect the power cable (1) to the
mains adapter.
► Plug the mains cable (2) into a mains outlet.
► Connect the mains adapter cable (3) to
3
the DC jack (DC IN) of the device.
2
1
Fujitsu17
First-time setup of your device
Switching on the device for the first time
Switchingonforthefirsttime
When you switch on the device for the first time, the supplied software is
installed and configured. Because this procedure must not be interrupted,
you should set aside enough time for it to be fully completed and connect
the device to the mains using th e mains adapter.
During the installation process, DO NOT restart the device unless
you are requested to do so!
To make it easier to use yo
is pre-installed on the
ur device for the first time, the operating system
hard disk.
► Switch on your device.
► During installation, follow the instructions on screen.
If a W indows operating system is installed on your device, you will find more
information on the system and drivers, help programmes, updates, manuals etc.
on the device or on the Internet at "
http://www.fujitsu.com/fts/support/".
You can find information and help on the Windows operating system functions
on the Internet at "
http://windows.microsoft.com".
18Fujitsu
Working w ith the notebook
Working with the notebook
Notebook,operationNotebook
This chapter describes the basics for operating your notebook. Please read the chapter
entitled "
devices such as a mouse and a printer to the notebook.
Status indicators
Statusindicators
The status indicators provide information about the status of the power supply,
the drives and the keyboard functions.
Connecting external devices", Page 44 for instructions on how to connect
Please refer to the notes in "Important notes", Page 13.
Fujitsu19
Working with the notebook
Status indicator sDescription
Wireless components indicator
•The indicator is lit: The wireless components are switched on.
•The indicator is not lit: The wireless components are switched off.
Power-on indicator/Standby
StandbyindicatorPowerindicator
•The indicator is lit: The notebook is switched on.
•The indicator flashes: The n
•The indicator is not lit: The notebook is switched off.
Battery charging indicator/power connector
The state of charge of the battery is shown by the battery indicator.
Without the mains adapter connected:
•Indicator is off: The system is in battery operation.
With mains adapter connected:
•The indicator is illuminated (orange): The battery is charging.
•Indicator is blue: Th e battery is fully charged.
•Indicator flashes purple: a fault has occurred. The battery cannot be
recharged.