Fujitsu siemens D2750-A Data Sheet

Value Mainboard D2750-A µBTX
- preliminary -
Intel® G31 Express Chipset for DDR2 667 SDRAM Memory and Intel® Core™2 Duo Processors and Core™2 Quad Processors (up to 1333 MHz FSB)
Chipset:
Intel® G31 / ICH7
Processors:
Intel® Core™ 2 Quad Processors, LGA775 with 1333/1066 MHz FSB
Intel® Core™ 2 DUO Processors, LGA775 with 1333/1066/800 MHz FSB
Intel® Pentium® Dual Core E2xxx Processors, LGA775 with 800 MHz FSB
Intel® Celeron® 4xx Processors, LGA775 with 800 MHz FSB
Compatible with Intel® 06 and 05A processors
(Picture similar to product)
Memory:
DDR2 800 SDRAM DDR2 667 SDRAM
Product Features:
Graphics on board Audio on board USB 2.0 on board GBit LAN on board Serial ATA II on board
Issue September 2007
Pages 2
Data Sheet Issue: September 2007 Mainboard D2750-A Page 2 / 2
modified and adapted by Fujitsu Siemens Computers; Recovery BIOS,
or
LAN (WoL) by interesting Packets, Link Status Change and Magic
Board Size µBTX: 10,5“ x 9.95“ (266.7 x 264.2 mm) Chipset Intel® G31 Memory
2 DIMM Sockets (1.8V), 256 MB - 4 GB, Single or Dual channel, DDR2 800/667 SDRAM, unbuffered, no ECC
(For details on recommended RAM, please refer to our website)
Processors
Intel® Core™ 2 Quad Processors, LGA775, 1333/1066 MHz FSB, Intel® Core™ 2 Duo Processors, LGA775, 1333/1066/800 MHz FSB,
Intel® Pentium® Dual Core E2xxx Processors, 800 MHz FSB, Intel® Celeron® 4xx Processors, LGA775, 800 MHz FSB
Compatible with Intel® 06 and 05A processors (For details on processors supported, please refer to our website)
Power Specification
BTX12V (24 Pin) or ATX12V (20 Pin) Power Supply required Support for Soft-Off Power Supplies 5V and 3.3V Supply Voltage on PCI Slots (PCI Rev. 2.3)
3.3V Auxiliary Supply Voltage on PCI Slots (Wake-Up Function) On board CPU Voltage Regulator, 5V / 2A Auxiliary Power required for USB Wake-Up from Save-to-RAM, Save-to-Disk
Power Supply Requirements
for onboard components (worst case)
Source
Voltage
PS Load (min. .) 1
Voltage
Tolerance
(max)
Mainboard
Current
(max.)
+ 12 V 0.3 A ± 5 % 10 A
Main Power - 12 V 0 A ± 10 % 0.05 A
Supply + 5 V 0.6A ± 5 % 8 A
+ 3.3 V 0A ± 5 % 0.5 A
Aux. Power
Supply
1) PS must support these load conditions if low power processors (Celeron 4xx) are used.
+ 5 V 0 A ± 5 % 2 A
BIOS
Phoenix Trusted Core BIOS Version 6.00 SM-BIOS (DMI), BIOS and CPU Microcode Update via disk (stable
user settings), Quick Boot, Logo Boot, Quiet Boot, Plug & Play, Automatic DRAM and PCI Configuration, BIOS Support for S.M.A.R.T., Advanced Power Management, ACPI S3 (Save-to-RAM), ACPI S4 (Save-to-Disk), Wake on time from S5
Security Features
Recovery BIOS, System and BIOS Password, Boot and/or Write Protection for Floppy Disk Drive, Boot Sequence Control, Serial Port Access Protection, Boot Sector Virus Warning, Write Protection for Flash BIOS
Special Features Silent Fan LT Independent temperature related processor fan and system fan control System Guard View and adjust Silent Fan Silent Drives Noise reduction for optical and hard disk drives Recovery BIOS Restores a corrupted BIOS Desk Update Simple driver update with DU CD Multi Boot Comfortable boot from any boot device HDD Password Access protection for up to two disk drives
External Connectors
LAN
Mouse Audio
USB USB VGA COM Keyboard
Graphics
Intel® GMA3100 Graphics Controller, shared memory (up to 256MB), DirectX 9 compliant, upgradeable with PCI Express x16 Graphics Card ADD2 cards
Audio Realtek ALC262, 2-channel, High Definition Audio
LAN Realtek Ethernet Controller with 10/100/1000 MBit/s via PCI Express, Wake-on­Packet™, bootix® PXE Support, BIOS MAC Address Display
Drives
-
4 Serial ATA 300 Interfaces, up to 4 Drives
- Floppy
Versions D2750-A Features
Chipset Intel® G31 Board Size µBTX VGA Stereo Audio / Multichannel Audio  / ­Buzzer / int. Speaker Support  / - LAN Gbit / 100 Mbit / 10 Mbit  /  /  LAN ASF / AoL / WoL / Boot - / - /  /  SATA / ATA / RAID / eSATA-support  / - / - / ­FireWire™ / USB 2.0 - /  FAN monitored PSU
1)
/ CPU / AUX1 / AUX2 - / - / - / ­FAN controlled PSU1) / CPU / AUX1 / AUX2 - /  / / - TEMP monitored CPU / ONB1 / ONB2 / HDD /  /  / -
Special Features Silent Fan / Silent Fan LT - / System Guard / Silent Drives / Recovery BIOS/Desk Update/Multi Boot/Safe Standby / / / ­HDD Password Logo Boot Option / Intel On Screen Branding /
Internal Connectors DIMM Sockets (DDR2 SDRAM) 2 PCI Express x16 1 PCI Slots (32Bit, 33 MHz, 5 V and 3.3 V) PCI Rev. 2.3 2 PCI Express x1 ­SATA (300) / ATA (100) / Floppy 4 / - / 1 S/PDIF (digital Audio) OUT / IN - / ­CD / AUX Audio Input - / ­Frontpanel Audio (9-Pin, Azalia Pinning) 1 FireWire™ (9-Pin, Intel standard header) ­USB (2.0, ~480 MB/s, 2 channels per connector) 2 Serial (FIFO, 16550 compatible) ­FAN PSU
1)
/ CPU /AUX1 /AUX2 - / 1 / 1 / ­SMBus (Case Temperature) ­Intrusion (Case Open) ­Parallel (EPP/ECP) Pin Connector 1) 1 Power 24 pin (BTX) / 4 pin (12V processor supply) 1 / 1
External Connectors VGA 1 Audio Mic. In / Line in / Line out 1 / 1 / 1 S/PDIF (5.1 digital Audio, cinch) OUT / IN - / ­LAN (RJ-45) 1 PS/2 Mouse / Keyboard 1 / 1 FireWire™ (6-Pin, IEEE 1394) ­USB (2.0, ~480MB/s) 4 Serial (RS232, FIFO, 16550 compatible) 1 Parallel (EPP/ECP) 1) -
1) External parallel port possible via optional connector cable
2) Not supported by standard Power Supplies
All rights, including rights created by patent grant or registration of a utility model or design as well as rights of technical modifications are reserved. Delivery subject to availability. Designations may be trademarks, the use of which by third parties for their own purposes may violate the rights of the trademark owners.
Copyright Fujitsu Siemens Computers, 09/2007
Published by
Fujitsu Siemens Computers http://www.fujitsu-siemens.com/
Company stamp
Loading...