Fujitsu siemens D1372, D1371, D1370 Additional Technical Manual

COMPONENT

.com Additional Technical Manual

System board D1372, D1371, D1370

Are there ...

... any technical problems or other
questions you need clarifi ed?

Please contact:

· Our Hotline:

Mo-Fr: 8 a.m. - 6 p.m.
Sat: 9 a.m. - 2 p.m.
Tel.: ++49 (0) 180 3777 005

· your sales outlet
The latest information on our produc t s, tips, updates, et c., can be found on the Internet

under: http://www.fujitsu-siemens.com/mainboards

Dieses Handbuch wurde auf Recycling-Papier gedruckt.

This manual has been printed on recycled paper.
Ce manuel est imprimé sur du papier recyclé.
Este manual ha sido impreso sobre papel reciclado.
Questo manuale è stato stampato su carta da riciclaggio.
Denna handbok är tryckt på recyclingpapper.
Dit handboek werd op recycling-papier gedrukt.

Herausgegeben von/Published by

Fujitsu Siemens Computers GmbH

Bestell-Nr./Order No.:
Printed in the Federal Republic of Germany
AG 1201 12/01

A26361-D1372-Z180-1-7619

A26361-D1372-Z180-1-7619

System Board
D1372
D1371
D1370

Additional Technical Manual

December 2001 edition

Intel, Pentium and Celeron are registered trademarks of Intel Corporation, USA.

Microsoft, MS, MS-DOS and Windows are registered trademarks of Microsoft Corporation.
PS/2 and OS/2 Warp are registered tradem arks of International Busi ness Machines, Inc.
Magic Packet is a regi stered trademark of Advanced M i cro Devices, Inc.
Rambus, RDRAM, and the Rambus Logo are registered trademarks of Rambus Inc. Direct

Rambus, RIMM, SO-RI M M , and Direct RDRAM are trademarks of Rambus Inc.

All other trademarks referenced are trademarks or registered trademarks of their respectiv e

owners, whose protected rights are acknowledged.

Copyright ã Fujitsu Siem ens Computers GmbH 2001

All rights, includi ng ri ghts of translation, reproduction by printing, copying or s i m i l ar m ethods,
even of parts are reserved.

Offenders will be liable for damages.
All rights, including rights creat ed by patent grant or registration of a utilit y model or design,

are reserved. Delivery subject to availability.

Right of technical modi f i cation reserved.

Contents

Introduction........................................................................................................................................1

Features............................................................................................................................................2

Mechanics.........................................................................................................................................3

Connectors........................................................................................................................................5

Documentation................................................................................................................................10

Installing drivers...............................................................................................................................11

Upgrading main memory..................................................................................................................11

Troubleshooting...............................................................................................................................11

Power supply monitoring....................................................................................................5

Fan 1 connector.................................................................................................................9

Fan 2 connector.................................................................................................................7

Front panel connector........................................................................................................6

Intrusion connector for case open detect for optional push-button (opener).......................7

USB port C / D 1 - Dual channel........................................................................................7

Wake On LAN (WOL) connector........................................................................................6

CD-ROM audio connector (internal)...................................................................................8

Audio front panel (internal).................................................................................................8

Auxiliary (MPEG, TV) audio connector (internal)................................................................8

Configuration.............................................................................................................................9

Functions controlled by the configuration switch................................................................ 9

Power......................................................................................................................................10

Power requirement for onboard components (worst case)...............................................10

Power loadability..............................................................................................................10

Message BIOS update.............................................................................................................11

The screen stays blank............................................................................................................11

A26361-D1372-Z180-1-7619

Introduction

Depending on the configuration chosen, some of the hardware components des cribed

may not be available on your system board.

i

You will find further information e. g. in the complete system board Technical Manual and in the
"BIOS Setup" descri ption.

Further information regarding drivers i s provided on the supplied drivers di skettes or on the

"Drivers & Utilities" or "ServerSt art " CD. For detailed information please read the "Installing drivers "
chapter. The latest BIOS version and drivers can be found on t he i nt ernet under
http://www.fujitsu-siemens.com/en/service.

Computer system boards and components contain very delicate IC chips. To protect them

· Use a grounded wrist strap.

against damage caused by st atic electricity , you must follow these precautions:

!

· Unplug your computer before you remov e any part of the casing.

· Place the system board and the components on a grounded antistatic pad whenever

you remove them from the computer.
Hold components by the edge, do not touch any pins or connectors on them.
Once you have installed the system board, you should remove the battery protection (i.e.

the thin plastic plat e bet ween battery and contact spring).

A26361-D1372-Z180-1-7619 English - 1

Features

Features

The table shows assembly versions of this system board as an example.

Features D1370-B D1371-A D1372-A

Chipset Intel 810E2 Intel 810E2 Intel 810E2
Board Size m-ATX m-ATX m-ATX
VGA onboard üüü
Audio onboard (AC '97) üüü
LAN onboard / with Alert-on-LAN - / - ü / - ü / ü
Thermal Management onboard - - ü
System Monitoring onboard - - ü
Fujitsu Siemens Keyboard Power Button Support --­Buzzer onboard / int. Speak er Support ü / - ü / - ü / -

Internal Connectors

DIMM Sockets (SDRAM) 2 2 2
AGP Slot - - ­PCI Slots (32Bit, 33 M Hz, 5 V and 3.3 V) 3 3 3
ISA Slot - - ­CNR Slot 1 - 1
IDE Interfaces (Ult ra DMA/100) 2 2 2
Floppy Interface (up to 2.88 MB ) 1 1 1
CD / AUX Audio Input 1 / - 1 / - 1 / 1
Front Panel Audio Output 1 1 1
Wake-on-LAN 1 1 1
Int. Serial Port / wi th SmartCard Support 1 / - 1 / - 1/ ­Int. USB Connectors / shared with CNR / with

SmartCard Support

External Connectors

VGA 1 1 1
Audio Mic. / in / out (2 x 1 Vrms / 32 W) 1 / 1 / 1 1 / 1 / 1 1 / 1 / 1
Game/MIDI 1 1 1
LAN (RJ-45) - 1 1
PS/2 Mouse/Keyboard 1 / 1 1 / 1 1 / 1
Ext. Serial Port (FI FO, 16550 compatible) 1 1 1
Parallel Port (EPP/ECP) 1 1 1
USB Connectors external 2 2 2

2 / 1 / - 2 / - / - 2 / 1 / 1

2 - English A26361-D1372-Z180-1-7619

Mechanics

Mechanics

Layout System board D1372 / D1371 / D1370

µ-ATX 9.6" x 7.6’’ (243.84 m m x 193.04 mm)
Some of the following connec t ors are optional and may therefore not be inc l uded on your system

board.

31 4 5

2

1 = PS/2 mouse port
2 = PS/2 keyboard port
3 = Serial port 1
4 = Parallel port
5 = VGA port
6 = LAN port

The components and connectors m arked are not necessarily present on the system board.

6

8

7

9a 9c9b

7 = USB ports A and B
8 = Game/Midi port
9a = Audio Line-Out / Headphones
9b = Audio Line-In
9c = Audio Micro-In

A26361-D1372-Z180-1-7619 English - 3

Mechanics

12

DIMM 2

DIMM 1

3

45

6

7

8

9

16

10

11

1 = Power supply monitoring
2 = Power supply
3 = Connector for control panel
4 = Floppy disk drive
5 = IDE drives 3 and 4 (secondary)
6 = IDE drives 1 and 2 (primary)
7 = Wake On LAN

PCI 1

15

10 = Fan 2
11 = Configuration switch
12 = AUX audi o i nput
13 = Audio front panel
14 = CD audio input
15 = seri al port 2
16 = Fan 1 (e. g. f or the processor)

PCI 3

PCI 2

CNR

121314

8 = Cover monitoring
9 = USB port C / D

The components and connectors m arked are not necessarily present on the system board.

4 - English A26361-D1372-Z180-1-7619

Connectors

Connectors

Some of the following connec tors are optional!

!

Power supply monitoring

Pin Signal

1 AC Outlet (high asserted)
2 PS FAN Control (low asserted)
3 PS FAN full on (low assert ed)
4 PS FAN pulse
5SMB CLK
6SMB DATA
7 VCC EEPROM (+3,3V)
8GND

1

A26361-D1372-Z180-1-7619 English - 5

Connectors

1)

HD-LED

SCSI LED Input

Message LED

1)

Front panel connector

Power On/Off

1)

Reset

1)

Sleep

1) Cable is not included in the delivery scope.

2) 2pin or 3pin connector possible

1) The sleep butt on (optional) functions only for operating systems with APM (not with ACPI).
Pin Signal Pin Signal

1 Sleep LED (Cathode) 2 not connected
3 Sleep LED (Anode) 4 Key
5Key6GND
7 P owerON_LE D (Anode) 8 not connected

9 P owerON_LE D (Anode) 10 Key pin
11 PowerON_LED (Cathode) 12 Key pin
13 Me ssage LED (Anode) 14 Key
15 Message LED (Cathode) 16 Not connected
17 Key 18 SCSI LED input (low ass ert ed)
19 HD_LED (Anode) 20 SCSI LED input (low asserted)
21 HD_LED (Cathode) 22 Not connected
23 GND 24 Key
25 P ower button (low asserted) 26 GND

1)

27

Sleep button (low asserted) 28 GND

29 Reset button (low asserted) 30 GND

Power On

1) 2)

LED

1)

Sleep LED

1
2

Wake On LAN (WOL) connector

1

Pin Signal

1 VCC Auxiliary

2GND

3 Wake pulse (high asserted)

6 - English A26361-D1372-Z180-1-7619

Connectors

Intrusion connector for case open

1

detect for optional push-button
(opener)

Pin Signal

1GND
2 Case open (low asserted)
3 Intrusion switch pres ent (low asserted)

USB port C / D 1 - Dual channel

(internal or external via special wire)

Pin Signal Pin Signal Pin Signal

1 VCC Dual / VCC (fused

max. 500mA and power

supervision with over

current detection)
2 Data negative 8 GND 14 GND
3

4 GND 10 Data negative (port D) 16 Data negative (port C)
5 Shield GND 11 VCC Dual / VCC (fused

6 Key 12 Power supply on (CCR

Data positive

7 Shield GND / Ov er

Current

9 Data positive (port D) 15 Data positive (port C)

max. 500mA and power

supervision with over

current detection)

on)

(max. 1 second low

pulse)

12

17

14

1

7

13 Key

17 VCC Dual (fused max.

18 Key

500mA and power

supervision with over

current detection)

Fan 2 connector

(system fan - supervised)

Pin Signal

1GND
2 +12 V
3 Fan sense

1

A26361-D1372-Z180-1-7619 English - 7

Connectors

Auxiliary (MPEG, TV) audio connector (internal)

Pin Signal

1 Left AUX audio input
2 Analog GND
3 Analog GND
4 Right AUX audio input

1

Audio front panel (internal)

Pin Signal Pin Signal

1 Analog VCC (5 V) 2 Micro Input
3 Analog GND 4 Micro Bias
5 Right Audio in 6 Right Line Output
7 Key 8 future use
9 Left Audio in 10 Left Line Output*

12

CD-ROM audio connector (internal)

Pin Signal

1 Left CD audio input
2 CD GND
3 CD GND
4 Right CD audio input

1

8 - English A26361-D1372-Z180-1-7619

Connectors

Fan 1 connector

(processor fan - controlled and supervised, only
for 3 pin fans)

Pin Signal

1GND
2 Controlled fan voltage (0 V / 6...12 V) or fix FAN voltage (+12 V)
3 Fan sense

1

Configuration

Functions controlled by the configuration switch

Switch Function SKP RCV FWP PSS

1 Password skip on X X X
1OffoffXXX
2 Recovery BIOS X on X X
2 Off X off X X
3 133 MHz FSB for future Celeron

Processors

3 66 / 100 MHz FSB for Celeron

Processors

4 Low auxiliary power supply (<2 A) f/

USB wakeup disabled

4 High aux iliary power supply X X X off

XXonX

XXoffX

XXXon

A26361-D1372-Z180-1-7619 English - 9

Documentation

Power

Power requirement for onboard components (worst case)

Source Voltage Maximum variation Maximum current Comment
Main power supply -12 V ±5 % 350 mA
Main power supply +12 V ±10 % 200 mA
Main power supply +5.0 V ± 5 % 15 A
Main power supply +3.3 V ±5 % 4 A

Auxiliary power supply +5.0 V ±5 % 2 A

Power loadability

Fuse

number

Maximum fuse

current

1 750 mA Keyboard port Not specified

2 500 mA Universa l serial bus (USB) Port A 500 mA
3 500 mA Universa l serial bus (USB) Port B 500 mA
4 1250 mA Universal serial bus (USB) P ort C 500 mA

Universal serial bus (USB) Port D 500 mA

Function Maximum function current

Mouse port Not spec i f i ed

Game port Not specified

VGA connector Minimum 50 mA

Documentation

Ê Insert the "Drivers & Utilities" CD.
Ê If the CD does not start automaticall y, run the START.EXE file in the main directory of the CD.
Ê Select your system board or your device.
Ê Select Documentation.
Ê Select - Technical Manuals
Ê Select - Technical Manuals (BIOS)

You may have to install the Acrobat Reader - Software on the CD-ROM

(path: utls/acrobat) bef ore readi ng!

i

For more details please read the acc ordi ng readme.txt files.

10 - English A26361-D1372-Z180-1-7619

Installing drivers

Installing drivers

Ê Insert the "Drivers & Utilities" CD.
Ê If the CD doesn't start automatical l y call the START.EXE file in the mai n directory of the CD.
Ê If the system board list is displayed select the system board or select under Driver the

operating system used and the audio and video drivers.

Upgrading main memory

Support: The system needs at least one module.
Size: From 32 Mbytes up to 512 Mbytes SDRA M
Technology: PC100 unbuffered DIMM modules.

Granularity: For one socket 16, 32, 64, 128, 256,or 512 MB

168 pin, 3.3 V, 64 bit, 72 bit
no ECC support

PC 133 Modulescan be plugged in, but run at 100 M H

Troubleshooting

Message BIOS update

The System BIOS prov i des optimum support for the proces sor you have chosen. If the m essage

BIOS update for installed CPU failed

appears the microcode required for the processor inserted must still be loaded. Further information
on this is available in the "BIOS Setup" manual on the "Drivers & Utilities" CD provided.

The screen stays blank

If your screen stay s blank this may have the following cause:

The wrong RAM memory module has been inserted

Ê See the chapter "Main Memory" for informat i on whi ch memory modules can be used.

ACPI S3 (Save-to-RAM) and/or ACP I S4 (Save-to-Disk) doesn't work
This system board is fully compliant for ACPI S3 and S4. Therefore it is PC99 certified by Microsoft.
If you have any problems with ACPI please ensure that all of your components are supporting

ACPI S3 and S4.

- Operating system

- Hardware and dri vers of controllers (e. g. VGA, audio, LAN, SCSI controllers).

For further information please ref er t o http://developer.intel.com/technology/iapc/involve.htm.

A26361-D1372-Z180-1-7619 English - 11