COMPONENT
.com Additional Technical Manual
System board D1335 / D1337
Are there ...
... any technical problems or other
questions you need clarifi ed?
Please contact:
· Our Hotline:
Mo-Fr: 8 a.m. - 6 p.m.
Sat: 9 a.m. - 2 p.m.
Tel.: ++49 (0) 180 3777 005
· your sales outlet
The latest information on our produc t s, tips, updates, et c., can be found on the Internet
under: http://www.fujitsu-siemens.com/mainboards
Dieses Handbuch wurde auf Recycling-Papier gedruckt.
This manual has been printed on recycled paper.
Ce manuel est imprimé sur du papier recyclé.
Este manual ha sido impreso sobre papel reciclado.
Questo manuale è stato stampato su carta da riciclaggio.
Denna handbok är tryckt på recyclingpapper.
Dit handboek werd op recycling-papier gedrukt.
Herausgegeben von/Published by
Fujitsu Siemens Computers GmbH
Bestell-Nr./Order No.:
Printed in the Federal Republic of Germany
AG 0102 01/02
A26361-D1337-Z180-1-7619
A26361-D1337-Z180-1-7619
System Board D1335 /
D1337
Additional Technical Manual
January 2002 edition
Intel, Pentium and Celeron are registered trademarks of Intel Corporation, USA.
Microsoft, MS, MS-DOS and Windows are registered trademarks of Microsoft Corporation.
PS/2 and OS/2 Warp are registered tradem arks of International Busi ness Machines, Inc.
Magic Packet is a regi stered trademark of Advanced M i cro Devices, Inc.
Rambus, RDRAM, and the Rambus Logo are registered trademarks of Rambus Inc. Direct
Rambus, RIMM, SO-RI M M , and Direct RDRAM are trademarks of Rambus Inc.
All other trademarks referenced are trademarks or registered trademarks of their respectiv e
owners, whose protected rights are acknowledged.
Copyright ã Fujitsu Siem ens Computers GmbH 2002
All rights, includi ng ri ghts of translation, reproduction by printing, copying or s i m i l ar m ethods,
even of parts are reserved.
Offenders will be liable for damages.
All rights, including rights creat ed by patent grant or registration of a utilit y model or design,
are reserved. Delivery subject to availability.
Right of technical modi f i cation reserved.
Contents
Introduction........................................................................................................................................1
Features............................................................................................................................................2
Mechanics.........................................................................................................................................3
Connectors........................................................................................................................................5
Documentation................................................................................................................................13
Installing drivers...............................................................................................................................13
Upgrading main memory..................................................................................................................13
Troubleshooting...............................................................................................................................13
Power supply monitoring....................................................................................................5
Front panel connector........................................................................................................6
SMB connector (internal)...................................................................................................6
BMC SMB connector (internal) ..........................................................................................7
Fan 2 connector.................................................................................................................7
Fan 3 connector.................................................................................................................7
Power supply for RSB........................................................................................................7
Connector for RSB.............................................................................................................8
Intrusion connector for case open detect for optional push-button (opener).......................8
NMI connector (internal) ....................................................................................................8
USB port C / D 1 - Dual channel........................................................................................9
Wake On LAN (WOL) connector........................................................................................9
CD-ROM audio connector (internal)................................................................................. 10
Audio front panel (internal)...............................................................................................10
Auxiliary (MPEG, TV) audio connector (internal)..............................................................10
Power supply ATX 12 V...................................................................................................11
Fan 1 connector ...............................................................................................................11
Configuration...........................................................................................................................12
Functions controlled by the configuration switch..............................................................12
Power......................................................................................................................................12
Power requirement for onboard components (worst case)...............................................12
Power loadability..............................................................................................................12
Message BIOS update.............................................................................................................13
The screen stays blank............................................................................................................14
A26361-D1337-Z180-1-7619
Introduction
Depending on the configuration chosen, some of the hardware components des cribed
may not be available on your system board.
i
You will find further information e. g. in the complete system board Technical Manual and in the
"BIOS Setup" descri ption.
Further information regarding drivers i s provided on the supplied drivers di skettes or on the
"Drivers & Utilities" or "ServerSt art " CD. For detailed information please read the "Installing drivers "
chapter. The latest BIOS version and drivers can be found on t he i nt ernet under
http://www.fujitsu-siemens.com/en/service.
Computer system boards and components contain very delicate IC chips. To protect them
· Use a grounded wrist strap.
against damage caused by st atic electricity , you must follow these precautions:
!
· Unplug your computer before you remov e any part of the casing.
· Place the system board and the components on a grounded antistatic pad whenever
you remove them from the computer.
Hold components by the edge, do not touch any pins or connectors on them.
Once you have installed the system board, you should remove the battery protection (i.e.
the thin plastic plat e bet ween battery and contact spring).
A26361-D1337-Z180-1-7619 English - 1
Features
Features
The table shows assembly versions of this system board as an example.
Features D1335-B D1337-A
Chipset Intel i845D Intel i845D
Board Size ATX ATX
VGA onboard - Audio onboard (AC '97) üü
LAN onboard / with Alert-on-LAN - / - ü / -
Thermal Management onboard - ü
System Monitoring onboard - ü
Fujitsu Siemens Keyboard Power Button Support - ü
Buzzer onboard / int. Speak er Support ü / - - / ü
Internal Connectors
DIMM Sockets (DDR) 2 2
AGP Slot 1 AGP Pro Slot - 1
PCI Slots (32Bit, 33 M Hz, 5 V and 3.3 V) 5 5
ISA Slot - CNR Slot 1 IDE Interfaces (Ult ra DMA/100) 2 2
Floppy Interface (up to 2.88 MB ) 1 1
CD / AUX Audio Input 1 / 1 1 / 1
Front Panel Audio Output 1 1
Wake-on-LAN 1 1
Int. Serial Port / wi th SmartCard Support - / - - / Int. USB Connectors / shared with CNR / with
SmartCard Support
External Connectors
VGA - Audio Mic. / in / out (2 x 1 Vrms / 32 W) 1 / 1 / 1 1 / 1 / 1
Game/MIDI 1 1
LAN (RJ-45) 1 1
PS/2 Mouse/Keyboard 1 / 1 1 / 1
Ext. Serial Port (FI FO, 16550 compatible) 2 2
Parallel Port (EPP/ECP) 1 1
USB Connectors external 2 2
2 / 1 / - 2 / - / ü
2 - English A26361-D1337-Z180-1-7619
Mechanics
Mechanics
Layout System board D1335 / D1337
ATX 12" x 9.6’’ (304.8 mm x 243.84 mm)
Some of the following connec t ors are optional and may therefore not be inc l uded on your system
board.
31 4 5
2
1 = PS/2 mouse port
2 = PS/2 keyboard port
3 = Serial port 1
4 = Parallel port
5 = Serial port 2
The components and connectors m arked are not necessarily present on the system board.
6
8
7
9a 9c9b
6 = LAN connector
7 = USB ports A and B
8 = Game/Midi port
9a = Audio Line-Out / Headphones
9b = Audio Line-In
9c = Audio Micro-In
A26361-D1337-Z180-1-7619 English - 3
Mechanics
7
DIMM 2
DIMM 1
12
56 8
34
22
21
1 = Power supply
2 = Floppy Disk Drive
3 = IDE drives 3 and 4 (secondary)
4 = Power supply monitoring
5 = Connector for control panel and
loudspeaker
6 = IDE drives 1 and 2 (primary)
7 = SMB 1 / SMB 2
8 = Fan 2
9 = Fan 3
10 = Power supply RSB
12 = Cover monitoring
13 = NMI
14 = USB ports C / D
15 = Wake On LAN
16 = CD audio input
17 = Audio front panel
18 = AUX audio input
19 = Power supply +3.3 V
20 = Power supply +12 V
21 = Power supply +3.3 V
22 = Fan 1 (e.g. for the processor)
AGP
PCI 3
PCI 2
PCI 1
1618
1920
17
PCI 5
PCI 4
CNR
11 = Connector for RSB (Remote Service
Board)
The components and connectors m arked are not necessarily present on the system board.
9
10
11
12
13
14
15
4 - English A26361-D1337-Z180-1-7619
Connectors
Connectors
Some of the following connec tors are optional!
!
Power supply monitoring
Pin Signal
1 AC Outlet (high asserted)
2 PS FAN Control (PWM high = full))
3 PS FAN 2 pulse
4 PS FAN 1 pulse
5SMB CLK
6SMB DATA
7 VCC EEPROM (+3,3V)
8GND
1
A26361-D1337-Z180-1-7619 English - 5
Connectors
1)
HD-LED
SCSI LED Input
Message LED
1)
Front panel connector
Power On/Off
1)
Reset
1)
Sleep
1) Cable is not included in the delivery scope.
2) 2pin or 3pin connector possible
1) The sleep butt on (optional) functions only for operating systems with APM (not with ACPI).
Pin Signal Pin Signal
1 Sleep LED (Cathode) 2 In cas e of 'Sound via internal system
speaker' support: Speaker negative
Otherwise: not connected
3 Sleep LED (Anode) 4 Key
5Key6GND
7 PowerON_LED (A node) 8 In case of 'Sound via internal system
speaker' support: Speaker positive
Otherwise: not connected
9 PowerON_LED (A node) 10 Key pin
11 Sleep LED and PowerON_LED
12 Key pin
(Cathode)
13 Message LED (Anode) 14 Key
15 Message LED (Cathode) 16 Not connected
17 Key 18 SCSI LED input (low ass ert ed)
19 HD_LED (Anode) 20 SCSI LED input (low asserted)
21 HD_LED (Cathode) 22 Not connected
23 GND 24 Key
25 P ower button (low asserted) 26 GND
1)
27
Sleep button (low asserted) 28 GND
29 Reset button (low asserted) 30 GND
Power On
1) 2)
LED
1)
Sleep LED
1
2
SMB connector (internal)
1
Pin Signal
1 P3V3P_DUAL
2 SMB_CLK_DUAL_H
3 SMB_DATA_DUAL_H
4GND
6 - English A26361-D1337-Z180-1-7619
Connectors
BMC SMB connector (internal)
Pin Signal
1 P3V3P_DUAL
2 SMB_PIC_CLK_H
3 SMB_PIC_DATA_H
4GND
Fan 2 connector
(system fan - supervised)
Pin Signal
1GND
2 Fix Fan voltage (+12 V, max. 1 A)
3 Fan sense
Fan 3 connector
(system fan - supervised)
Pin Signal
1GND
2 Fix Fan voltage (+12 V, max. 1 A)
3-
1
1
1
Power supply for RSB
1
Pin Signal
1 VCC_Aux
2GND
A26361-D1337-Z180-1-7619 English - 7
Connectors
Connector for RSB
Pin 1Pin 26
Pin Signal Pin Signal
1 SCI_N 2 I2C2_CLOCK
3 OVER_TEMP_N 4 GND
5 RSB_PRSNT_N 6 I2C2_DATA
7 STBY_PWR_GOOD 8 NMI_OUT
9 PWR_GOOD 10 I2C2_INT_N
11 HOST_RST_N 12 GND
13 PWR_SWITCH_N 14 RI_N
15 PWR_ON_N 16 SLP_S5_N
17 ON_OFF_0 18 ON_OFF_1
19 ON_OFF_2 20 ON_OFF_3
21 ON_OFF_4 22 ON_OFF_5
23 ON_OFF_6 24 ON_OFF_7
25 FP_RES_SW_N 26 GPIO_9
Intrusion connector for case open
1
detect for optional push-button
(opener)
Pin Signal
1GND
2 Case open (low asserted)
3 Intrusion switch pres ent (low asserted)
NMI connector (internal)
Pin Signal
1GND
2NMI_L
3GND
1
8 - English A26361-D1337-Z180-1-7619
Connectors
USB port C / D 1 - Dual channel
(internal or external via special wire)
12
17
14
1
7
Pin Signal Pin Signal Pin Signal
1 VCC Dual / VCC (f used
max. 500mA and power
supervision with over
current detection)
2 Data negative (port C) 8 GND 14 GND
Data positive (port C)
3
4 GND 10 Data negati ve (port D) 16 Data negative (port C)
5 Shield GND 11 VCC Dual / VCC (fused
6 Key 12 Power supply on (CCR
7 Shield GND 13 Key
9 Data positive (port D) 15 Data positive (port C)
max. 500mA and power
supervision with over
current detection)
on)
(max. 1 second low
pulse)
17 VCC Dual (fused max.
500mA and power
supervision with over
current detection)
18 Key
Wake On LAN (WOL) connector
1
Pin Signal
1 VCC Auxiliary
2GND
3 Wake pulse (high asserted)
A26361-D1337-Z180-1-7619 English - 9
Connectors
CD-ROM audio connector (internal)
Pin Signal
1 Left CD audio input
2 CD GND
3 CD GND
4 Right CD audio input
1
Audio front panel (internal)
Pin Signal Pin Signal
1 Micro input 2 Analog GND
3 Micro bias 4 Analog VCC
5 Right line output 6 Right line ret urn
7 Not connected 8 Key
9 Left li ne output 10 Left line return
12
Auxiliary (MPEG, TV) audio connector (internal)
Pin Signal
1 Left AUX audio input
2 Analog GND
3 Analog GND
4 Right AUX audi o i nput
1
10 - English A26361-D1337-Z180-1-7619
Connectors
Power supply +3.3 V
1
4
Pin Signal Pin Signal
1 GND 2 GND
3 +3.3 V 4 GND
5 +3.3 V 6 3.3 V
Power supply ATX 12 V
1
3
Pin Signal Pin Signal
1 GND 2 GND
3 +12 V 4 +12 V
Power supply +3.3 V
Pin Signal Pin Signal
1 GND 2 GND
3 GND 4 +3.3 V
5 +3.3 V 6 Not connected
1
Fan 1 connector
(processor fan - controlled and supervised, only
for 3 pin fans)
Pin Signal
1GND
2 Controlled fan voltage (0 V / 6...12 V) or fix FAN voltage (+12 V)
3 Fan sense
1
A26361-D1337-Z180-1-7619 English - 11
Connectors
Configuration
Functions controlled by the configuration switch
Switch Function SKP RCV N.U. LAUX
1 Password skip on
1Offoff
2 Recovery BIOS on
2Off off
3 Not used
3 Not used
4 Low auxiliary power supply (<2 A) on
4 High auxiliary power supply off
Power
Power requirement for onboard components (worst case)
Source Voltage Maximum variation Maximum current Comment
Main power supply +12 V ±5 % 200 mA
Main power supply -12 V ±10 % 350 mA
Main power supply +5.0 V ±5 % 15 A
Main power supply +3.3 V ±5 % 4 A
Auxiliary power supply +5.0 V ±5 % 2 A
Power loadability
Fuse
number
Maximum fuse
current
1 750 mA Keyboard port Not specified
2 500 mA Universa l serial bus (USB) Port A 500 mA
3 500 mA Universa l serial bus (USB) Port B 500 mA
4 1250 mA Universal serial bus (USB) Port C 500 mA
Universal serial bus (USB) Port D 500 mA
Function Maximum function current
Mouse port Not spec i f i ed
Game port Not specified
VGA connector Minimum 50 mA
12 - English A26361-D1337-Z180-1-7619
Documentation
Documentation
Ê Insert the "Drivers & Utilities" CD.
Ê If the CD does not start automaticall y, run the START.EXE file in the main directory of the CD.
Ê Select your system board or your device.
Ê Select Documentation.
Ê Select - Technical Manuals
Ê Select - Technical Manuals (BIOS)
You may have to install the Acrobat Reader - Software on the CD-ROM
(path: utls/acrobat) bef ore readi ng!
i
For more details please read the acc ordi ng readme.txt files.
Installing drivers
Ê Insert the "Drivers & Utilities" CD.
Ê If the CD doesn't start automatical l y call the START.EXE file in the mai n directory of the CD.
Ê If the system board list is displayed select the system board or select under Driver the
operating system used and the audio and video drivers.
Upgrading main memory
Support: The system needs at leas t one module and can manage two DDR modules.
Size: From 64 Mbytes up to 2 Gbytes DDR-SDRAM
Technology: PC2100 unbuffered DIMM modules.
Granularity: For one socket 64, 128, 256, 512 or 1024 MB
ECC support: Yes
PC 266 support: Up to 2 double sided DDR-266 DDR-DIMMs.
184 pin, 2.5 V, 64 bit, 72 bit
4 internal banks required
PC 133 Modules can be plugged in, but run at 100 M Hz
Troubleshooting
Message BIOS update
The System BIOS prov i des optimum support for the proces sor you have chosen. If the m essage
BIOS update for installed CPU failed
appears the microcode required for the processor inserted must still be loaded. Further information
on this is available in the "BIOS Setup" manual on the "Drivers & Utilities" CD provided.
A26361-D1337-Z180-1-7619 English - 13
Troubleshooting
The screen stays blank
If your screen stay s blank this may have the following cause:
The wrong RAM memory module has been inserted
Ê See the chapter "Main Memory" for informat i on whi ch memory modules can be used.
ACPI S3 (Save-to-RAM) and/or ACP I S4 (Save-to-Disk) doesn't work
This system board is fully compliant for ACPI S3 and S4. Therefore it is PC99 certified by Microsoft.
If you have any problems with ACPI please ensure that all of your components are supporting
ACPI S3 and S4.
- Operating system
- Hardware and dri vers of controllers (e. g. VGA, audio, LAN, SCSI controllers).
For further information please ref er t o http://developer.intel.com/technology/iapc/involve.htm.
14 - English A26361-D1337-Z180-1-7619
Loading...