Page 1
ADDITIONAL TECHNICAL
ADDITIONAL TECHNICAL
ADDITIONAL TECHNICALADDITIONAL TECHNICAL
MANUAL
MANUAL
MANUALMANUAL
SYSTEM BOARD D1279/ D1289
SYSTEM BOARD D1279/ D1289
SYSTEM BOARD D1279/ D1289SYSTEM BOARD D1279/ D1289
Page 2
Are there ...
... any technical problems or other
questions you need clarified?
Please contact:
• Our Hotline:
Mo-Fr: 8 a.m. - 6 p.m.
Sat: 9 a.m. - 2 p.m.
Tel.: ++49 (0) 180 3777 005
• your sales outlet
The latest information on our products, tips, updates, etc., can be found on the Internet
under: http://www.fujitsu-siemens.com/mainboard
Page 3
Page 4
Dieses Handbuch wurde auf Recycling-Papier gedruckt.
This manual has been printed on recycled paper.
Ce manuel est imprimé sur du papier recyclé.
Este manual ha sido impreso sobre papel reciclado.
Questo manuale è stato stampato su carta da riciclaggio.
Denna handbok är tryckt på recyclingpapper.
Dit handboek werd op recycling-papier gedrukt.
Herausgegeben von/Published by
Fujitsu Siemens Computers GmbH
A26361-D1289-Z180-1-7619
Bestell-Nr./Order No.:
Printed in the Federal Republic of Germany
AG 0601 06/01
A26361-D1289-Z180-1-7619
A26361-D1289-Z180-1-7619A26361-D1289-Z180-1-7619
A26361-D1289-Z180-1-7619
Page 5
System Board
D1279 / D1289
Additional Technical Manual
June 2001 edition
Page 6
AMD, AMD Duron and AMD Athlon are registered trademarks of Advanced Micro Devices,
Inc., USA
Microsoft, MS, MS-DOS and Windows are registered trademarks of Microsoft Corporation.
PS/2 and OS/2 Warp are registered trademarks of International Business Machines, Inc.
Magic Packet is a registered trademark of Advanced Micro Devices, Inc.
All other trademarks referenced are trademarks or registered trademarks of their respective
owners, whose protected rights are acknowledged.
Copyright ã Fujitsu Siemens Computers GmbH 2001
All rights, including rights of translation, reproduction by printing, copying or similar methods,
even of parts are reserved.
Offenders will be liable for damages.
All rights, including rights created by patent grant or registration of a utility model or design,
are reserved. Delivery subject to availability.
Right of technical modification reserved.
This manual was produced by
cognitas. Gesellschaft für Technik-Dokumentation mbH
www.cognitas.de
Page 7
Contents
Introduction........................................................................................................................................ 1
Features............................................................................................................................................ 2
Mechanics.........................................................................................................................................3
Connectors................................................................................................................................5
Front panel connector........................................................................................................5
Power supply monitoring....................................................................................................6
Serial chipcard reader or internal serial port 2 (COM 2).....................................................6
Intrusion connector for case open detect for optional push-button (opener).......................7
Fan 2 connector.................................................................................................................7
USB port C, D....................................................................................................................7
Wake On LAN (WOL) connector........................................................................................8
CD-ROM audio connector (internal)...................................................................................8
Auxiliary (MPEG, TV) audio connector (internal)................................................................8
Fan 1 connector.................................................................................................................9
USB port E - Single channel..............................................................................................9
Configuration...........................................................................................................................10
Functions controlled by the configuration switch..............................................................10
Power......................................................................................................................................10
Power requirement ..........................................................................................................10
Documentation................................................................................................................................11
Installing drivers ..............................................................................................................................11
Upgrading main memory .................................................................................................................11
Troubleshooting...............................................................................................................................12
Power loadability..............................................................................................................10
Message BIOS update.............................................................................................................12
The screen stays blank............................................................................................................12
A26361-D1289-Z180-1-7619
Page 8
Page 9
Introduction
Depending on the configuration of your system board, some of the hardware components
described may not be available.
i
You may find further information e. g. in the complete Technical Manual for the system board and in
the description "BIOS Setup".
Further information to drivers is provided on the supplied drivers diskettes or on the
"Drivers & Utilities" or "ServerStart" CD. For detailed information please look at chapter "Installing
drivers". The latest BIOS version or drivers can be found on the internet under
http://www.fujitsu-siemens.com/en/service.
Computer system boards and components contain very delicate IC chips. To protect them
against damage caused by static electricity, you must follow these precautions:
!
• Use a grounded wrist strap.
• Unplug your computer before you remove any part of the casing.
• Place the system board and the components on a grounded antistatic pad whenever
you remove them from the computer.
Hold components by the edge, do not touch any pins or connectors on them.
Once you have installed the system board, you should remove the battery protection (i.e.
the thin plastic plate between battery and contact spring).
A26361-D1289-Z180-1-7619
Page 10
Features
Features
The table shows one assembly version of this system board as an example.
Features D1279 D1289
Chipset VIA Apollo KT266 VIA Apollo KT266
Board Size ATX ATX
VGA onboard - Audio onboard (AC '97) üü
LAN onboard / with Alert-on-LAN - / - - / Thermal Management onboard - System Monitoring onboard - Fujitsu Siemens Keyboard Power Button Support -Buzzer onboard / int. Speaker Support ü /- ü /-
Internal Connectors
DIMM Sockets (DDR-SDRAM) 3 3
AGPSlot(4x,32Bit,66MHz,1.5V) 1 1
PCI Slots (32Bit, 33 MHz, 5 V and 3.3 V) 5 5
ISA Slot - ACR Slot - CNR Slot (Type B) 1 1
AMR Slot - IDE Interfaces (Ultra DMA/100) 2 2
Floppy Interface (up to 2.88 MB) 1 1
CD / AUX Audio Input 1 / 1 1 / 1
Wake-on-LAN üü
Int. Serial Port / with SmartCard Support - / - - / USB Connectors int. / int. on ACR/CNR 3 / 1 3 / 1
External Connectors
VGA - Audio Mic. / in / out (2 x 0.5 W / 8 Ω) üü
Game/MIDI üü
LAN (RJ-45) - PS/2 Mouse/Keyboard üü
Ext. Serial Port (FIFO, 16550 compatible) 2 2
Parallel Port (EPP/ECP) 1 1
USB Connectors external 2 2
2 - English A26361-D1289-Z180-1-7619
Page 11
Mechanics
Mechanics
Layout System board D1279 / D1289
ATX 12" x 8’’ (304,8 mm x 203.2 mm)
Some of the following connectors are optional and may therefore not be included on your system
board.
Ports of the D1279
1 = PS/2 mouse controller
2 = PS/2 keyboard port
3 = USB port 1
4 = USB port 2
5 = Serial port 1
6 = Parallel port
Ports of the D1289
1 = PS/2 mouse controller
2 = PS/2 keyboard port
3 = USB port 1
4 = USB port 2
5 = Serial port 1
6 = Parallel port
31
2
4
31
2
4
6
5
7 = Serial port 2
8 = Game/Midi port
9a = Audio Line-Out
9b = Audio Line-In
9c = Audio Micro-In
6
5
7 = Game/Midi port
8a = Audio Line-Out
8b = Audio Line-In
8c = Audio Micro-In
8
7
9a 9c9b
7
8a 8c8b
A26361-D1289-Z180-1-7619 English - 3
Page 12
Mechanics
r
12345 6 7 8
9
17
DIMM 3
DIMM 2
DIMM 1
16
AGP
PCI 5
PCI 4
1213
1415
1 = Connector for control panel and
loudspeake
2 = Power supply monitoring
3 = Serial chipcard reader interface (optional)
or serial port 2
4 = Cover monitoring
5 = Fan 2 (e. g. for the processor)
6 = Floppy Disk Drive
7 = IDE drives 3 and 4 (secondary)
PCI 1
PCI 3
PCI 2
9 = Frequency for the Front Side Bus
10 = USB ports C, D
11 = Wake On LAN
12 = CD audio input
13 = AUX audio input
14 = Power supply
15 = Additional power supply
16 = Fan 1 (e. g. for the processor)
17 = USB port E
8 = IDE drives 1 and 2 (primary)
The components and connectors marked are not necessarily present on the system board.
10
11
4 - English A26361-D1289-Z180-1-7619
Page 13
Connectors
Some of the following connectors are optional!
!
Mechanics
Front panel connector
Power On/Off
1)
Reset
1)
Sleep
1) Cableis not included in the delivery scope.
2) Thesame interface
3) 2pin or 3pin connector possible
Message LED
1)
HD-LED
SCSI LED Input
1)
Power On
1) 3)
LED
2)1)
Sleep LED
Speaker
Pin Signal Pin Signal
1 Sleep LED (Cathode) 2 Speaker
3 Sleep LED (Anode) 4 Key
5 Key 6 GND
7 PowerON_LED (Anode) 8
1)
VCC or GND
9 PowerON_LED (Anode) 10 Key pin
11 PowerON_LED (Cathode) 12 Key pin
13 Message LED (Anode) 14 Key
15 Message LED (Cathode) 16 Not connected
17 Key 18 SCSI LED input (low asserted)
19 HD_LED (Anode) 20 SCSILED input (low asserted)
21 HD_LED (Cathode) 22 Not connected
23 GND 24 Key
25 Powerbutton (low asserted) 26 GND
2)
27
Sleep button (low asserted) 28 GND
29 Reset button (low asserted) 30 GND
1) Pin 8 is connected to VCC if audio is not onboard.
Pin 8 is connected to GND if audio is onboard.
2) The sleep button (optional) functions only for operating systems with APM (not with ACPI).
1
2
2)
A26361-D1289-Z180-1-7619 English - 5
Page 14
Mechanics
Power supply monitoring
Pin Signal
1 Monitor on
2 PS FAN control (low asserted)
3 PS FAN full on (low asserted)
4 PS FAN pulse
5 SMB CLK
6 SMB DATA
7 VCCEEPROM
8 GND
Serial chipcard reader or internal
2
1
serial port 2 (COM 2)
external via optional cable
1
Pin Signal Pin Signal
1 DCD 2 2 DSR2
3 SIN 2 4 RTS 2
5 SOUT 2 6 CTS 2
7 DTR 2 8 PC_On_Strobe (TTL - Signal, low
9 GND 10 VCC Auxiliary
11 EXT SMI (low asserted) 12 VCC
13 RESET (TTL - Signal, low asserted) 14 GND
15 GND 16 Key
asserted)
6 - English A26361-D1289-Z180-1-7619
Page 15
Mechanics
Intrusion connector for case open detect for optional push-button (opener)
Pin Signal
1 GND
2 Case open (low asserted)
3 Intrusion switch present (low asserted)
Fan 2 connector
(system fan - supervised)
Pin Signal
1 GND
2 +12 V
3 Fan sense
USB port C, D
1
1
12
Pin Signal Pin Signal
1 VCC Dual (fused max. 500mA and
power supervision with over current
3 Data negative 4 GND
5
7 GND 8 Data negative
9 Shield GND 10 VCC Dual (fused max. 500mA and
11 Key 12 Power supply on (CCR on)
A26361-D1289-Z180-1-7619 English - 7
detection)
Data positive
2 Shield GND
6 Data positive
power supervision with over current
detection)
(max. 1 second low pulse)
Page 16
Mechanics
Wake On LAN (WOL) connector
Pin Signal
1 VCC Auxiliary
2 GND
3 Wake pulse (high asserted)
CD-ROM audio connector (internal)
Pin Signal
1 Left CD audio input
2 CD GND
3 CD GND
4 Right CD audio input
1
1
Auxiliary (MPEG, TV) audio connector (internal)
1
Pin Signal
1 Left AUX audio input
2 Analog GND
3 Analog GND
4 Right AUX audio input
8 - English A26361-D1289-Z180-1-7619
Page 17
Mechanics
Fan 1 connector
(processor fan - controlled and supervised, only
for 3 pin fans)
Pin Signal
1 GND
2 Controlled fan voltage (0 V / 6...12 V)
3 Fan sense
USB port E - Single channel
Pin Signal
Pin Signal Pin Signal
1 VCC Dual (max. 250mA) 2 VCC Dual (max. 250mA)
3 Reserved 4 Key
5
7 Data positive 8 Data negative
9 GND 10 Over current (low asserted)
Power supply on
(max 1 second low pulse)
6 GND
1
1
2
A26361-D1289-Z180-1-7619 English - 9
Page 18
Mechanics
Configuration
Functions controlled by the configuration switch
Function SKP RCV FWP PSS
Password skip on X X X
Off off X X X
Recovery BIOS X on X X
Off X off X X
Floppy write protect X X on X
Off X X off X
Low auxiliary power supply (<2 A) X X X on
High auxiliary power supply X X X off
PSS must be switched on for systems with not enough 5 V auxiliary power for all its self powered
wake devices (WakeOnLAN, USB, PCI) in S3-S4.
Power
Power requirement
Source Voltage Maximum variation Maximum current Comment
Main power supply +5.0V ±5 % 15 A
Main power supply +12 V ±5 % 350 mA
Main power supply -12 V ±10 % 200 mA
Main power supply +3.3V ±5 % 4 A
Auxiliary power supply +5.0 V ±5 % 2 A
Power loadability
Fuse
number
10 - English A26361-D1289-Z180-1-7619
Maximum fuse
current
1 750mA Keyboard port Not specified
2 500mA Universal serial bus (USB) Port A 500 mA
3 500mA Universal serial bus (USB) Port B 500 mA
Function Maximum function current
Mouse port Not specified
Game port Not specified
VGA connector Minimum 50 mA
Page 19
Documentation
Documentation
Ê Insertthe "Drivers & Utilities" CD.
Ê Ifthe CD does not start automatically, run the START.EXE file in the main directory of the CD.
Ê Selectyour system board or your device.
Ê Select Documentation.
Ê Select- Technical Manuals
Ê Select- Technical Manuals (BIOS)
You may have to install the Acrobat Reader - Software on the CD-ROM
(path: utls/acrobat) before reading!
i
For more details please read the according readme.txt files.
Installing drivers
Ê Insertthe "Drivers & Utilities" CD.
Ê Ifthe CD doesn't start automatically call the START.EXE file in the main directory of the CD.
Ê Ifthe system board list is displayed select the system board or select under Driver the
operating system used and the audio and video drivers.
Upgrading main memory
Support: The system needs at least one module.
Size: From 64 Mbytes up to 1,5 Gbyte DDR-SDRAM
Technology: PC1600 or PC2100 unbuffered DIMM modules.
Granularity: For one socket 64, 128, 256 or 512 Mbyte
A26361-D1289-Z180-1-7619 English - 11
8M, 16M and 32M x 64/72 bit.
DDR-SDRAM modules with ECC can be plugged in but ECC is not functioning. Mix
of ECC modules with non ECC modules is possible.
Mix of PC1600 and PC2100 DIMMs is possible, but all modules will only work at
PC1600 speed.
Page 20
Troubleshooting
Troubleshooting
Message BIOS update
The System BIOS provides optimum support for the processor you have chosen. If the message
BIOS update for installed CPU failed
appears the microcode required for the processor inserted must still be loaded. Further information
on this is available in the "BIOS Setup" manual on the "Drivers & Utilities" CD provided.
The screen stays blank
If your screen stays blank this may have the following cause:
The wrong RAM memory module has been inserted
Ê Seethe chapter "Main Memory" for information which memory modules can be used.
ACPI S3 (Save-to-RAM) and/or ACPI S4 (Save-to-Disk) doesn't work
This system board is fully compliant for ACPI S3 and S4. Therefore it is PC99 certified by Microsoft.
If you have any problems with ACPI please ensure that all of your components are supporting
ACPI S3 and S4.
− Operating system
− Hardware and drivers of controllers (e. g. VGA, audio, LAN, SCSI controllers).
For further information please refer to http://developer.intel.com/technology/iapc/involve.htm .
12 - English A26361-D1289-Z180-1-7619
Loading...