Page 1
SYSTEM BOARD
D1214/D1215/D1216
ADDITIONAL TECHNICAL
MANUAL
Page 2
Are there ...
... any technical problems or other
questions you need clarified?
Please contact:
• Our Hotline:
Mo-Fr: 8 a.m. - 6 p.m.
Sat: 9 a.m. - 2 p.m.
Tel.: ++49 (0) 180 3777 005
• your sales outlet
The latest information on our products, tips, updates, etc., can be found on the Internet under:
http://www.fujitsu-siemens.com/mainboard
Page 3
Page 4
Dieses Handbuch wurde auf Recycling-Papier gedruckt.
This manual has been printed on recycled paper.
Ce manuel est imprimé sur du papier recyclé.
Este manual ha sido impreso sobre papel reciclado.
Questo manuale è stato stampato su carta da riciclaggio.
Denna handbok är tryckt på recyclingpapper.
Dit handboek werd op recycling-papier gedrukt.
Herausgegeben von/Published by
Fujitsu Siemens Computers GmbH
Bestell-Nr./Order No.:
Printed in the Federal Republic of Germany
AG 0801 08/01
A26361-D1216-Z181-1-7619
A26361-D1216-Z181-1-7619
Page 5
System Board
D1214/D1215/D1216
Additional Technical Manual
August 2001 edition
Page 6
Intel, Pentium and Celeron are registered trademarks of Intel Corporation, USA.
Microsoft, MS, MS-DOS and Windows are registered trademarks of Microsoft Corporation.
PS/2 and OS/2 Warp are registered trademarks of International Business Machines, Inc.
Magic Packet is a registered trademark of Advanced Micro Devices, Inc.
Rambus, RDRAM, and the Rambus Logo are registered trademarks of Rambus Inc. Direct
Rambus, RIMM, SO-RIMM, and Direct RDRAM are trademarks of Rambus Inc.
All other trademarks referenced are trademarks or registered trademarks of their respective
owners, whose protected rights are acknowledged.
Copyright ã Fujitsu Siemens Computers GmbH 2001
All rights, including rights of translation, reproduction by printing, copying or similar methods,
even of parts are reserved.
Offenders will be liable for damages.
All rights, including rights created by patent grant or registration of a utility model or design,
are reserved. Delivery subject to availability.
Right of technical modification reserved.
Page 7
Contents
Introduction........................................................................................................................................ 1
Features............................................................................................................................................1
Mechanics.........................................................................................................................................3
Connectors................................................................................................................................5
Power supply monitoring....................................................................................................5
Intrusion connector for case open detect for optional push-button (opener).......................5
Serial port 2 (COM 2).........................................................................................................6
Front panel connector........................................................................................................7
Fan 2 connector.................................................................................................................8
Wake On LAN (WOL) connector........................................................................................8
USB port C, D....................................................................................................................8
CD-ROM audio connector (internal)...................................................................................9
Auxiliary (MPEG, TV) audio connector (internal)................................................................9
Fan 1 connector.................................................................................................................9
Configuration...........................................................................................................................10
Functions controlled by the configuration switch..............................................................10
Power......................................................................................................................................10
Power requirement ..........................................................................................................10
Documentation................................................................................................................................11
Installing drivers ..............................................................................................................................11
Upgrading main memory .................................................................................................................11
Troubleshooting...............................................................................................................................12
Power loadability..............................................................................................................10
Message BIOS update.............................................................................................................12
The screen stays blank............................................................................................................12
A26361-D1216-Z181-1-7619
Page 8
Page 9
Introduction
Depending on the configuration of your system board, some of the hardware components
described may not be available.
i
You may find further information e. g. in the complete Technical Manual for the system board and in
the description "BIOS Setup".
Further information to drivers is provided on the supplied drivers diskettes or on the "Drivers &
Utilities" or "ServerStart" CD. For detailed information please look at chapter "Installing drivers". The
latest BIOS version or drivers can be found on the internet under http://www.fujitsu-
siemens.com/en/service.
Computer system boards and components contain very delicate IC chips. To protect them
against damage caused by static electricity, you must follow these precautions:
!
• Use a grounded wrist strap.
• Unplug your computer before you remove any part of the casing.
• Place the system board and the components on a grounded antistatic pad whenever
you remove them from the computer.
Hold components by the edge, do not touch any pins or connectors on them.
Once you have installed the system board, you should remove the battery protection (i.e.
the thin plastic plate between battery and contact spring).
A26361-D1216-Z181-1-7619 English - 1
Page 10
Features
Features
The table shows assembly versions of this system board as example.
Features
Chipset Intel 815E
Board Size µ-ATX µ-ATX µ-ATX
VGA onboard (Intel 815E) üü Audio onboard (AC '97) üüü
LAN onboard / with Alert-on-LAN ü / - ü / ü - / Thermal Management onboard - ü System Monitoring onboard - ü Fujitsu Siemens Keyboard Power Button Support - ü Buzzer onboard / int. Speaker Support ü / - - / üü / -
Internal Connectors
DIMM Sockets (SDRAM) 2 2 2
AGP Slot (1/2/4x, 32Bit, 66 MHz) 1 1 1
PCI Slots (32Bit, 33 MHz, 5 V and 3.3 V) 3 3 3
ISA Slot - - ACR Slot - - CNR Slot (Type A) - - 1
AMR Slot - - IDE Interfaces (Ultra DMA/100) 2 2 2
Floppy Interface (up to 2.88 MB) 1 1 1
CD / AUX Audio Input 1 / 1 1 / 1 1 / 1
Wake-on-LAN 1 1 1
Int. Serial Port / with SmartCard Support 1 / ü 1 / ü 1 / USB Connectors int. / shared with CNR 2 / - 2 / - 2 / 1
External Connectors
VGA 1 1 Audio Mic. / in / out (2 x 0.5 W / 8 Ω)111
Game/MIDI 1 1 1
LAN (RJ-45) 1 1 PS/2 Mouse/Keyboard 1 1 1
Ext. Serial Port (FIFO, 16550 compatible) 1 1 1
Parallel Port (EPP/ECP) 1 1 1
USB Connectors external 2 2 2
D1214-A D1215-A D1216-B
2 - English A26361-D1216-Z181-1-7619
Page 11
Mechanics
Mechanics
Layout
µATX 9.6" x 8'' (243.84 mm x 203.2 mm)
Some of the following connectors are optional and may therefore not be included on your system
board.
123
4
1 = PS/2 mouse port
2 = PS/2 keyboard port
3 = LAN port
4 = USB ports A and B
5 = Parallel port
6 = Serial port 1
The components and connectors marked are not necessarily present on the system board.
5
6
7
7 = VGA port
8 = Game/Midi port
9a = Audio Line-Out
9b = Audio Line-In
9c = Audio Micro-In
8
9a9b9c
Headphones
A26361-D1216-Z181-1-7619 English - 3
Page 12
Mechanics
21 345 67
89
10
DIMM 2
15
DIMM 1
11
14
AGP
PCI 1
PCI 3
PCI 2
CNR
1213
1 = Power supply monitoring
2 = Cover monitoring
3 = Serial port 2
4 = Power supply
5 = Floppy disk drive
6 = IDE drives 3 and 4 (secondary)
7 = IDE drives 1 and 2 (primary)
8 = Connector for control panel
9 = Fan 2 (e. g. for the system fan -
supervised) *
10 = Wake On LAN
11 = USB ports C / D
12 = CD audio input
13 = AUX audio input
14 = Voltage indicator
15 = Fan 1 (e. g. for the processor)
The components and connectors marked are not necessarily present on the system board.
*) only for speed controllable fans (3 pin connector), for 2 pin processor fans use Fan2 connector
only.
4 - English A26361-D1216-Z181-1-7619
Page 13
Mechanics
Connectors
Some of the following connectors are optional!
!
Power supply monitoring
Pin Signal
1 Monitor on
2 PS FAN control (low asserted)
3 PS FAN full on (low asserted)
4 PS FAN pulse
5 SMB CLK
6 SMB DATA
7 VCC EEPROM
8 GND
Intrusion connector for case open detect for optional push-button (opener)
Pin Signal
1 GND
2 Case open (low asserted)
3 Intrusion switch present (low asserted)
1
1
A26361-D1216-Z181-1-7619 English - 5
Page 14
Mechanics
Serial port 2 (COM 2)
external via optional cable
2
1
Pin Signal Pin Signal
1 DCD 2 2 DSR 2
3 SIN 2 4 RTS 2
5 SOUT 2 6 CTS 2
7 DTR 2 8 PC_On_Strobe (TTL - Signal, low
9 GND 10 VCC Auxiliary
11 EXT SMI (TTL - Signal, low asserted) 12 VCC
13 RESET (TTL - Signal, low asserted) 14 GND
15 GND 16 Key
asserted)
6 - English A26361-D1216-Z181-1-7619
Page 15
Mechanics
Front panel connector
Power On/Off
1)
Reset
1)
Sleep
1) Cable is not included in the delivery scope.
2) The same interface
3) 2pin or 3pin conn ector poss ible
Message LED
1)
HD-LED
SCSI LED Input
1)
Power On
1) 3)
LED
2)1)
Sleep LED
Pin Signal Pin Signal
1 Sleep LED (Cathode) 2 Not connected
3 Sleep LED (Anode) 4 Key
5 Key 6 GND
7 PowerON_LED (Anode) 8
1)
VCC or GND
9 PowerON_LED (Anode) 10 Key pin
11 PowerON_LED (Cathode) 12 Key pin
13 Message LED (Anode) 14 Key
15 Message LED (Cathode) 16 Not connected
17 Key 18 SCSI LED input (low asserted)
19 HD_LED (Anode) 20 SCSI LED input (low asserted)
21 HD_LED (Cathode) 22 Not connected
23 GND 24 Key
25 Power button (low asserted) 26 GND
2)
27
reserved 28 GND
29 Reset button (low asserted) 30 GND
1) Pin 8 is connected to VCC if audio is not onboard.
Pin 8 is connected to GND if audio is onboard.
2) The sleep button (optional) functions only for operating systems with APM (not with ACPI).
1
2
A26361-D1216-Z181-1-7619 English - 7
Page 16
Mechanics
Fan 2 connector
(system fan - supervised)
Pin Signal
1 GND
2 +12 V
3 Fan sense
Wake On LAN (WOL) connector
Pin Signal
1 VCC Auxiliary
2 GND
3 Wake pulse (high asserted)
USB port C, D
1
1
12
Pin Signal Pin Signal
1 VCC Dual (fused max. 500mA and
power supervision with over current
3 Data negative 4 GND
5
7 GND 8 Data negative
9 Shield GND 10 VCC Dual (fused max. 500mA and
11 Key 12 Power supply on (CCR on)
8 - English A26361-D1216-Z181-1-7619
detection)
Data positive
2 Shield GND
6 Data positive
power supervision with over current
detection)
(max. 1 second low pulse)
Page 17
Mechanics
CD-ROM audio connector (internal)
1
Pin Signal
1 Left CD audio input
2 CD GND
3 CD GND
4 Right CD audio input
Auxiliary (MPEG, TV) audio connector (internal)
1
Pin Signal
1 Left AUX audio input
2 Analog GND
3 Analog GND
4 Right AUX audio input
Fan 1 connector
Pin Signal
1 GND
2 Controlled fan voltage (0 V / 6...12 V)
3 Fan sense
A26361-D1216-Z181-1-7619 English - 9
1
Page 18
Mechanics
Configuration
Functions controlled by the configuration switch
Function SKP RCV FWP PSS
Password skip on X X X
Off off X X X
Recovery BIOS X on X X
Off X off X X
Floppy write protect X X on X
Off X X off X
Low auxiliary power supply (<2 A) X X X on
High auxiliary power supply X X X off
PSS must be switched on for systems with not enough 5 V auxiliary power for all its self powered
wake devices (WakeOnLAN, USB, PCI) in S3-S4.
Power
Power requirement
Source Voltage Maximum variation Maximum current Comment
Main power supply +5.0 V ±5 % 15 A
Main power supply +12 V ±5 % 350 mA
Main power supply -12 V ±10 % 200 mA
Main power supply +3.3 V ±5 % 4 A
Auxiliary power supply +5.0 V ±5 % 2 A
Power loadability
Fuse
number
10 - English A26361-D1216-Z181-1-7619
Maximum fuse
current
1 750 mA Keyboard port Not specified
2 500 mA Universal serial bus (USB) Port A 500 mA
3 500 mA Universal serial bus (USB) Port B 500 mA
Function Maximum function current
Mouse port Not specified
Game port Not specified
Page 19
Documentation
Documentation
Ê Insert the "Drivers & Utilities" CD.
Ê If the CD does not start automatically, run the START.EXE file in the main directory of the CD.
Ê Select your system board or your device.
Ê Select Documentation.
Ê Select - Technical Manuals
Ê Select - Technical Manuals (BIOS)
You may have to install the Acrobat Reader - Software on the CD-ROM (path:
utls/acrobat) before reading!
i
For more details please read the according readme.txt files.
Installing drivers
Ê Insert the "Drivers & Utilities" CD.
Ê If the CD doesn't start automatically call the START.EXE file in the main directory of the CD.
Ê If the system board list is displayed select the system board or select under Driver the
operating system used and the audio and video drivers.
Upgrading main memory
Support: The system needs at least one module.
Size: From 32 Mbytes up to 512 Mbytes SDRAM
Technology: PC100 or PC133 unbuffered DIMM modules.
Granularity: For one socket 16, 32, 64, 128, 256 or 512 Mbyte
A26361-D1216-Z181-1-7619 English - 11
168 pin, 3.3 V, 64 bit, 72 bit (with ECC), SDRAM
2 M, 4 M, 8 M, 16 M and 32 M x 64 bit
2 M, 4 M, 8 M, 16 M and 32 M x 72 bit
SDRAM modules with ECC can be plugged in but ECC is not functioning. Mix of
ECC modules with non ECC modules is possible.
Mix of PC100 and PC133 DIMMs is possible, but all modules will only work at PC100
speed.
Page 20
Troubleshooting
Troubleshooting
Message BIOS update
The System BIOS provides optimum support for the processor you have chosen. If the message
BIOS update for installed CPU failed
appears the microcode required for the processor inserted must still be loaded. Further information
on this is available in the "BIOS Setup" manual on the "Drivers & Utilities" CD provided.
The screen stays blank
If your screen stays blank this may have the following cause:
The wrong RAM memory module has been inserted
Ê See the chapter "Main Memory" for information which memory modules can be used.
ACPI S3 (Save-to-RAM) and/or ACPI S4 (Save-to-Disk) doesn't work
This system board is fully compliant for ACPI S3 and S4. Therefore it is PC99 certified by Microsoft.
If you have any problems with ACPI please ensure that all of your components are supporting ACPI
S3 and S4.
− Operating system
− Hardware and drivers of controllers (e. g. audio, SCSI controllers).
For further information please refer to http://developer.intel.com/technology/iapc/involve.htm .
12 - English A26361-D1216-Z181-1-7619
Loading...