COMPONENT
.com Additional Technical Manual
System board D1215 / D1214
Are there ...
... any technical problems or other
questions you need clarifi ed?
Please contact:
· Our Hotline:
Mo-Fr: 8 a.m. - 6 p.m.
Sat: 9 a.m. - 2 p.m.
Tel.: ++49 (0) 180 3777 005
· your sales outlet
The latest information on our produc t s, tips, updates, et c., can be found on the Internet under:
http://www.fujitsu-siemens.com/mainboard
Dieses Handbuch wurde auf Recycling-Papier gedruckt.
This manual has been printed on recycled paper.
Ce manuel est imprimé sur du papier recyclé.
Este manual ha sido impreso sobre papel reciclado.
Questo manuale è stato stampato su carta da riciclaggio.
Denna handbok är tryckt på recyclingpapper.
Dit handboek werd op recycling-papier gedrukt.
Herausgegeben von/Published by
Fujitsu Siemens Computers GmbH
Bestell-Nr./Order No.:
Printed in the Federal Republic of Germany
AG 0102 01/02
A26361-D1215-Z181-1-7619
A26361-D1215-Z181-1-7619
System Board
D1215/D1214
Additional Technical Manual
January 2002 edition
Intel, Pentium and Celeron are registered trademarks of Intel Corporation, USA.
Microsoft, MS, MS-DOS and Windows are registered trademarks of Microsoft Corporation.
PS/2 and OS/2 Warp are registered tradem arks of International Busi ness Machines, Inc.
Magic Packet is a regi stered trademark of Advanced M i cro Devices, Inc.
Rambus, RDRAM, and the Rambus Logo are registered trademarks of Rambus Inc. Direct
Rambus, RIMM, SO-RI M M , and Direct RDRAM are trademarks of Rambus Inc.
All other trademarks referenced are trademarks or registered trademarks of their respectiv e
owners, whose protected rights are acknowledged.
Copyright ã Fujitsu Siem ens Computers GmbH 2002
All rights, includi ng ri ghts of translation, reproduction by printing, copying or s i m i l ar m ethods,
even of parts are reserved.
Offenders will be liable for damages.
All rights, including rights creat ed by patent grant or registration of a utilit y model or design,
are reserved. Delivery subject to availability.
Right of technical modi f i cation reserved.
Contents
Introduction........................................................................................................................................1
Features............................................................................................................................................2
Mechanics.........................................................................................................................................3
Connectors................................................................................................................................5
Power supply monitoring....................................................................................................5
Intrusion connector for case open detect for optional push-button (opener).......................5
Serial port 2 (COM 2).........................................................................................................6
Front panel connector........................................................................................................7
Fan 2 connector.................................................................................................................8
Wake On LAN (WOL) connector........................................................................................8
USB port C / D 1 - Dual channel........................................................................................8
CD-ROM audio connector (internal)...................................................................................9
Auxiliary (MPEG, TV) audio connector (internal)................................................................9
Fan 1 connector.................................................................................................................9
Configuration...........................................................................................................................10
Functions controlled by the configuration switch..............................................................10
Power......................................................................................................................................10
Power requirement...........................................................................................................10
Documentation................................................................................................................................11
Installing drivers...............................................................................................................................11
Upgrading main memory..................................................................................................................11
Troubleshooting...............................................................................................................................12
Power loadability..............................................................................................................10
Message BIOS update.............................................................................................................12
The screen stays blank............................................................................................................12
A26361-D1215-Z181-1-7619
Introduction
Depending on the configuration of your system board, s om e of the hardware components
described may not be availabl e.
i
You may find further information e. g. in the complete Techni cal Manual for the system board and in
the description "BIOS Setup".
Further information to drivers i s provided on the supplied drivers diskettes or on the
"Drivers & Utilities" or "ServerSt art " CD. For detailed information please look at chapter "Installing
drivers". The latest BIOS version or drivers can be found on the internet under
http://www.fujitsu-siemens.com/en/service.
Computer system boards and components contain very delicate IC chips. To protect them
· Use a grounded wrist strap.
against damage caused by st atic electricity , you must follow these precautions:
!
· Unplug your computer before you remov e any part of the casing.
· Place the system board and the components on a grounded antistatic pad whenever
you remove them from the computer.
Hold components by the edge, do not touch any pins or connectors on them.
Once you have installed the system board, you should remove the battery protection (i.e.
the thin plastic plat e bet ween battery and contact spring).
A26361-D1215-Z181-1-7619 English - 1
Features
Features
The table shows two assembly versions of this system board as example.
Features
Chipset Intel 815E
Board Size m-ATX m-ATX
VGA onboard (Intel 815E) üü
Audio onboard (AC '97) üü
LAN onboard / with Alert-on-LAN ü / - ü / ü
Thermal Management onboard - ü
System Monitoring onboard - ü
Fujitsu Siemens Keyboard Power Button Support - ü
Buzzer onboard / int. Speaker Support ü / - - / ü
Internal Connectors
DIMM Sockets (SDRAM) 2 2
AGP Slot (1/2/4x, 32Bit, 66 MHz) 1 1
PCI Slots (32Bit, 33 M Hz, 5 V and 3.3 V) 3 3
ISA Slot - ACR Slot - AMR Slot - IDE Interfaces (Ult ra DMA/100) 2 2
Floppy Interface (up to 2.88 MB ) 1 1
CD / AUX Audio Input 1 / 1 1 / 1
Wake-on-LAN 1 1
Int. Serial Port / wi th SmartCard Support 1 / ü 1 / ü
USB Connectors int. / shared with CNR 2 / - 2 / -
External Connectors D1214-A D1215-A
VGA 1 1
Audio Mic. / in / out (2 x 0.5 W / 8 W)11
Game/MIDI 1 1
LAN (RJ-45) 1 1
PS/2 Mouse/Keyboard 1 1
Ext. Serial Port (FIFO, 16550 compatible) 1 1
Parallel Port (EPP/ECP) 1 1
USB Connectors external 2 2
D1214-A D1215-A
2 - English A26361-D1215-Z181-1-7619
Mechanics
Mechanics
Layout
mATX 9.6" x 8’’ (243.84 mm x 203.2 mm)
Some of the following connec t ors are optional and may therefore not be inc l uded on your system
board.
123
4
1 = PS/2 mouse port
2 = PS/2 keyboard port
3 = LAN port
4 = USB ports A and B
5 = Parallel port
6 = Serial port 1
The components and connectors m arked are not necessarily present on the system board.
5
6
7
7 = VGA port
8 = Game/Midi port
9a = Audio Line-Out
9b = Audio Line-In
9c = Audio Micro-In
8
9a9b9c
Headphones
A26361-D1215-Z181-1-7619 English - 3
Mechanics
21
14
13
DIMM 2
DIMM 1
12
1 = Power supply
2 = Serial port 2
3 = Floppy disk drive
4 = IDE drives 3 and 4 (secondary)
5 = IDE drives 1 and 2 (primary)
6 = Connector for control panel
7 = Fan 2 (e. g. for the system fan -
supervised) *
4
3
56
8
7
9
AGP / GPA
PCI 1
PCI 2
PCI 3
1011
8 = Wake On LAN
9 = USB ports C / D
10 = CD audio input
11 = AUX audi o i nput
12 = Fan 1 (e. g. f or the processor)
13 = Power s uppl y monitoring
14 = Cover m oni toring
The components and connectors m arked are not necessarily present on the system board.
*) only for speed controllable f ans (3 pin connector), for 2 pin proces sor fans use Fan2 connector
only.
4 - English A26361-D1215-Z181-1-7619
Mechanics
Connectors
Some of the following connec tors are optional!
!
Power supply monitoring
Pin Signal
1 Monitor on
2 PS FAN control (low asserted)
3 PS FAN full on (low assert ed)
4 PS FAN pulse
5SMB CLK
6SMB DATA
7 VCC EEPROM
8GND
Intrusion connector for case open
1
1
detect for optional push-button
(opener)
Pin Signal
1GND
2 Case open (low asserted)
3 Intrusion switch pres ent (low asserted)
A26361-D1215-Z181-1-7619 English - 5
Mechanics
Serial port 2 (COM 2)
2
external via optional cable
1
Pin Signal Pin Signal
1 Sleep LED (Cathode) 2 Speaker
3 Sleep LED (Anode) 4 Key
5Key6GND
7 PowerON_LED (Anode) 8
1)
VCC or GND
9 PowerON_LED (Anode) 10 Key pi n
11 PowerON_LED (Cathode) 12 Key pin
13 Message LED (Anode) 14 Key
15 Message LED (Cathode) 16 Not connected
17 Key 18 SCSI LED input (low ass ert ed)
19 HD_LED (Anode) 20 SCSI LED input (low asserted)
21 HD_LED (Cathode) 22 Not connected
23 GND 24 Key
25 Power button (low asserted) 26 GND
2)
27
Sleep button (low asserted) 28 GND
29 Reset button (low asserted) 30 GND
1) Pin 8 is connected to VCC if audio is not onboard.
Pin 8 is connected to GND if audio is onboard.
2) The sleep butt on (optional) functions only for operating systems with APM (not with ACPI).
6 - English A26361-D1215-Z181-1-7619
Mechanics
Front panel connector
Power On/Off
1)
Reset
1)
Sleep
1) Cable is not included in the delivery scope.
2) The same interface
3) 2pin or 3pin connector possible
Message LED
1)
HD-LED
SCSI LED Input
1)
Power On LED
2)1)
Speaker
1) 3)
1
2
2)
Pin Signal Pin Signal
1 Sleep LED (Cathode) 2 Not connected
3 Sleep LED (Anode) 4 Key
5Key6GND
7 PowerON_LED (Anode) 8
1)
VCC or GND
9 PowerON_LED (Anode) 10 Key pi n
11 PowerON_LED (Cathode) 12 Key pin
13 Message LED (Anode) 14 Key
15 Message LED (Cathode) 16 Not connected
17 Key 18 SCSI LED input (low ass ert ed)
19 HD_LED (Anode) 20 SCSI LED input (low asserted)
21 HD_LED (Cathode) 22 Not connected
23 GND 24 Key
25 Power button (low asserted) 26 GND
2)
27
reserved 28 GND
29 Reset button (low asserted) 30 GND
1) Pin 8 is connected to VCC if audio is not onboard.
Pin 8 is connected to GND if audio is onboard.
2) The sleep butt on (optional) functions only for operating systems with APM (not with ACPI).
Do not connect an internal speak er i f a buzzer is onboard.
!
A26361-D1215-Z181-1-7619 English - 7
Mechanics
Fan 2 connector
(system fan - supervised)
Pin Signal
1GND
2 +12 V
3 Fan sense
1
Wake On LAN (WOL) connector
1
Pin Signal
1 VCC Auxiliary
2GND
3 Wake pulse (high asserted)
USB port C / D 1 - Dual channel
(internal or external via special wire)
7
1
14
17
12
Pin Signal Pin Signal Pin Signal
1 VCC Dual / VCC (fused
max. 500mA and power
supervision with over
current detection)
2 Data negative (port C) 8 GND 14 GND
Data positive (port C)
3
4 GND 10 Data negative (port D) 16 Data negative (port C)
5 Shield GND 11 VCC Dual / VCC (fused
6 Key 12 Power supply on (CCR
7 Shield GND 13 Key
9 Data posit i ve (port D) 15 Data pos i tive (port C)
max. 500mA and power
supervision with over
current detection)
on)
(max. 1 second low
pulse)
17 VCC Dual (fused max.
500mA and power
supervision with over
current detection)
18 Key
8 - English A26361-D1215-Z181-1-7619
Mechanics
CD-ROM audio connector (internal)
1
Pin Signal
1 Left CD audio input
2 CD GND
3 CD GND
4 Right CD audio input
Auxiliary (MPEG, TV) audio connector (internal)
1
Pin Signal
1 Left A UX audi o i nput
2 Analog GND
3 Analog GND
4 Right AUX audio input
Fan 1 connector
Pin Signal
1GND
2 Controlled fan voltage (0 V / 6...12 V)
3 Fan sense
1
A26361-D1215-Z181-1-7619 English - 9
Mechanics
Configuration
Functions controlled by the configuration switch
Function SKP RCV FWP PSS
Password skip on X X X
Off off X X X
Recovery BIOS X on X X
Off X off X X
Floppy write protect X X on X
Off X X off X
Low auxiliary power supply (<2 A) X X X on
High auxiliary power supply X X X off
PSS must be switched on for systems with not enough 5 V auxiliary power for all its self powered
wake devices (WakeOnLAN, USB, PCI) in S3-S4.
Power
Power requirement
Source Voltage Maximum variation Maximum current Comment
Main power supply +5.0 V ±5 % 15 A
Main power supply +12 V ±5 % 350 mA
Main power supply -12 V ±10 % 200 mA
Main power supply +3.3 V ±5 % 4 A
Auxiliary power supply +5.0 V ±5 % 2 A
Power loadability
Fuse
number
Maximum fuse
current
1 750 mA Keyboard port Not specified
2 500 mA Universal serial bus (USB) Port A 500 mA
3 500 mA Universal serial bus (USB) Port B 500 mA
Function Maximum function c urrent
Mouse port Not specified
Game port Not specif i ed
10 - English A26361-D1215-Z181-1-7619
Documentation
Documentation
Ê Insert the "Drivers & Utilities" CD.
Ê If the CD does not start automaticall y, run the START.EXE file in the main directory of the CD.
Ê Select your system board or your device.
Ê Select Documentation.
Ê Select - Technical Manuals
Ê Select - Technical Manuals (BIOS)
You may have to install the Acrobat Reader - Software on the CD-ROM
(path: utls/acrobat) bef ore readi ng!
i
For more details please read the acc ordi ng readme.txt files.
Installing drivers
Ê Insert the "Drivers & Utilities" CD.
Ê If the CD doesn't start automatical l y call the START.EXE file in the mai n directory of the CD.
Ê If the system board list is displayed select the system board or select under Driver the
operating system used and the audio and video drivers.
Upgrading main memory
Support: The system needs at least one m odul e.
Size: From 32 M bytes up to 512 Mbytes SDRA M
Technology: PC100 or PC133 unbuffered DIMM modules.
Granularity: For one socket 16, 32, 64, 128, 256 or 512 Mbyte
168 pin, 3.3 V, 64 bit, 72 bit (wi th ECC), SDRAM
2 M, 4 M, 8 M, 16 M and 32 M x 64 bit
2 M, 4 M, 8 M, 16 M and 32 M x 72 bit
SDRAM modules with ECC c an be pl ugged i n but ECC is not functioning. Mix of
ECC modules with non ECC modules i s possible.
Mix of PC100 and PC133 DIMMs is possible, but all modules will only work at PC100
speed.
A26361-D1215-Z181-1-7619 English - 11
Troubleshooting
Troubleshooting
Message BIOS update
The System BIOS prov i des optimum support for the proces sor you have chosen. If the m essage
BIOS update for installed CPU failed
appears the microcode required for the processor inserted must still be loaded. Further information
on this is available in the "BIOS Setup" manual on the "Drivers & Utilities" CD provided.
The screen stays blank
If your screen stay s blank this may have the following cause:
The wrong RAM memory module has been inserted
Ê See the chapter "Main Memory" for informat i on whi ch memory modules can be used.
ACPI S3 (Save-to-RAM) and/or ACP I S4 (Save-to-Disk) doesn't work
This system board is fully compliant for ACPI S3 and S4. Therefore it is PC99 certified by Microsoft.
If you have any problems with ACPI please ensure that all of your components are supporting
ACPI S3 and S4.
- Operating system
- Hardware and dri vers of controllers (e. g. audi o, SCSI controllers).
For further information please ref er t o http://developer.intel.com/technology/iapc/involve.htm.
12 - English A26361-D1215-Z181-1-7619
Loading...