Page 1
ADDITIONAL TECHNICAL
ADDITIONAL TECHNICAL
ADDITIONAL TECHNICALADDITIONAL TECHNICAL
MANUAL
MANUAL
MANUALMANUAL
SYSTEM BOARD D1184
SYSTEM BOARD D1184
SYSTEM BOARD D1184SYSTEM BOARD D1184
Page 2
Is there ...
... any technical problem or other
question you need clarified?
Please contact:
• Our Hotline:
Mo-Fr: 8 a.m. - 6 p.m.
Sat: 9 a.m. - 2 p.m.
Tel.: ++49 (0) 180 3777 005
• your sales outlet
The latest information on our products, tips, updates, etc., can be found on the Internet under:
http://www.fujitsu-siemens.com/mainboard
Page 3
Page 4
Dieses Handbuch wurde auf Recycling-Papier gedruckt.
This manual has been printed on recycled paper.
Ce manuel est imprimé sur du papier recyclé.
Este manual ha sido impreso sobre papel reciclado.
Questo manuale è stato stampato su carta da riciclaggio.
Denna handbok är tryckt på recyclingpapper.
Dit handboek werd op recycling-papier gedrukt.
Herausgegeben von/Published by
Fujitsu Siemens Computers GmbH
A26361-D1184-Z180-1-7619
Bestell-Nr./Order No.:
Printed in the Federal Republic of Germany
AG 0600 06/00
A26361-D1184-Z180-1-7619
A26361-D1184-Z180-1-7619A26361-D1184-Z180-1-7619
A26361-D1184-Z180-1-7619
Page 5
System Board D1184
Additional Technical Manual
June 2000 edition
Page 6
Intel, Pentium and Celeron are registered trademarks and MMX and OverDrive are
trademarks of Intel Corporation, USA.
Microsoft, MS, MS-DOS and Windows are registered trademarks of Microsoft Corporation.
PS/2 is a registered trademark of International Business Machines, Inc.
All other trademarks referenced are trademarks or registered trademarks of their respective
owners, whose protected rights are acknowledged.
Copyright ã Fujitsu Siemens Computers GmbH 2000
All rights, including rights of translation, reproduction by printing, copying or similar methods,
even of parts are reserved.
Offenders will be liable for damages.
All rights, including rights created by patent grant or registration of a utility model or design,
are reserved. Delivery subject to availability.
Right of technical modification reserved.
Page 7
Contents
Introduction........................................................................................................................................ 1
FCC Class B Compliance Statement.........................................................................................1
Features............................................................................................................................................2
Mechanics.........................................................................................................................................3
Connectors................................................................................................................................5
Serial chipcard reader or internal serial port 2 (COM 2).....................................................5
Front panel connector........................................................................................................6
Fan 2 connector.................................................................................................................7
USB chipcard reader .........................................................................................................7
Wake On LAN (WOL) connector........................................................................................7
CD-ROM audio connector (internal)...................................................................................8
Auxiliary (MPEG, TV) audio connector (internal)................................................................8
Fan 1 connector.................................................................................................................9
Power supply monitoring....................................................................................................9
Intrusion connector for case open detect for optional push-button (opener).......................9
Configuration...........................................................................................................................10
Functions controlled by the configuration switch..............................................................10
USB power ......................................................................................................................10
Power......................................................................................................................................11
Power requirement ..........................................................................................................11
Documentation................................................................................................................................11
Installing drivers ..............................................................................................................................11
Upgrading main memory .................................................................................................................12
Troubleshooting...............................................................................................................................12
Power loadability..............................................................................................................11
Message BIOS update.............................................................................................................12
The screen stays blank............................................................................................................12
A26361-D1184-Z180-1-7619
Page 8
Page 9
Introduction
This system board is available in different configuration levels. Depending on the
hardware configuration of your device, it may be that you cannot find several options in
i
your version of the system board, even though they are described.
You may find further information e. g. in the complete Technical Manual for the system board and in
the description "BIOS Setup".
Further information to drivers is provided on the supplied drivers diskettes or on the "Drivers &
Utilities" or "ServerStart" CD. For detailed information please look at chapter "Installing drivers". The
latest BIOS version or drivers can be found on the internet under http://www.fujitsu-
siemens.com/en/service.
FCC Class B Compliance Statement
This system board has been tested and found to comply with the limits for a "Class B" digital
device, pursuant to Part 15 of the FCC rules and meets all requirements of the Canadian
Interference-Causing Equipment Regulations. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in strict accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
Fujitsu Siemens Computers GmbH is not responsible for any radio or television interference
caused by unauthorized modifications of this equipment or the substitution or attachment of
connecting cables and equipment other than those specified by Fujitsu Siemens Computers
GmbH. The correction of interference caused by such unauthorized modification, substitution or
attachment will be the responsibility of the user.
The use of shielded I/O cables is required when connecting this equipment to any and all optional
peripheral or host devices. Failure to do so may violate FCC rules.
A26361-D1184-Z180-1-7619 English - 1
Page 10
Features
Features
The table shows two assembly versions of this system board as example.
Function Version D1184-A1X Version D1184-B1X
Processor socket PGA 370 PGA 370
Processor Intel Celeron or Pentium III Intel Celeron or Pentium III
Formfactor ATX ATX
Front Side Bus in MHz 66/100/133 66/100/133
Chipset 815 815
Memory sockets 3 DIMM 3 DIMM
ISA slots - - - PCI slots 5 5
ISA/PCI shared - - - AGP Port 1 1
AMR Port 1 1
System monitoring x x
Thermal Management x x
Wake On LAN x - Chipcard reader x x
Save to Disk (ACPI S4) x x
Save to RAM(ACPI S3) x x
LAN onboard x - Audio onboard AD1881A AD1881A
VGA onboard i 815 i 815
133 MHz Display Cache - - - -
Computer system boards and components contain very delicate IC chips. To protect them
against damage caused from electric static, you have to follow some precautions:
!
• Unplug your computer when you work inside.
• Hold components by the edge, don't touch their leads.
• Use a grounded wrist strap.
Place the system board and the components on a grounded antistatic pad whenever you
work outside the computer.
Once you have installed the system board, you should remove the battery protection (i.e.
the thin plastic plate between battery and contact spring).
2 - English A26361-D1184-Z180-1-7619
Page 11
Mechanics
Mechanics
Layout
ATX 12" x 8'' (304.8 mm x 203.2 mm)
Some of the following connectors are optional and may therefore not be included on your system
board.
DIMM 3
DIMM 2
DIMM 1
AGP
PCI 4
PCI 1
PCI 3
PCI 2
PCI 5
AMR
5 6 7
2314
1 = PS/2 mouse port
2 = PS/2 keyboard port
3 = LAN port
4 = USB ports 1 and 2
5 = Serial port 1
8
9a 9c9b
7 = VGA port
8 = Game/Midi port
9a = Audio Line-Out
9b = Audio Line-In
9c = Audio Micro-In
6 = Parallel port
The components and connectors marked do not have to be present on the system board.
A26361-D1184-Z180-1-7619 English - 3
Page 12
Mechanics
r
r
213456
7
17
16
DIMM 3
DIMM 2
DIMM 1
15
14
AGP
PCI 4
PCI 1
PCI 3
PCI 2
PCI 5
AMR
13
11
12
1 = Serial chipcard reader interface or serial
port 2
2 = Power supply
3 = IDE drives 3 and 4 (secondary)
4 = Floppy disk drive
5 = IDE drives 1 and 2 (primary)
6 = Front panel connector (power switch, LED,
loudspeaker)
7 = Configuration switch
8 = Fan 2 (e. g. for the processor)
9 = USB chipcard reade
10 = Wake On LAN
11 = CD audio input
12 = AUX Audio Input
13 = USB power jumpe
14 = Voltage indicator LED
15 = Fan 1 (e. g. for the processor)
16 = Power supply monitoring
17 = Intrusion monitoring
The components and connectors marked do not have to be present on the system board.
8
9
10
4 - English A26361-D1184-Z180-1-7619
Page 13
Connectors
Some of the following connectors are optional!
!
Mechanics
Serial chipcard reader or internal
2
serial port 2 (COM 2)
external via optional cable
1
Pin Signal Pin Signal
1 DCD 2 2 DSR 2
3 SIN 2 4 RTS 2
5 SOUT 2 6 CTS 2
7 DTR 2 8 PC_On_Strobe
9 GND 10 VCC Auxiliary
11 Not connected 12 VCC
13 RESET (high asserted) 14 GND
15 GND 16 Key
A26361-D1184-Z180-1-7619 English - 5
Page 14
Mechanics
Front panel connector
Power On/Off
1)
Reset
1)
Sleep
1) Cable is not included in the deliveryscope.
2) The same interface
3) 2pin or 3pin connector possible
MessageLED
1)
HD-LED
SCSI LED Input
1)
Power On LED
2)1)
Speaker
1)3)
Pin Signal Pin Signal
1 Not connected 2 Speaker
3 Standby LED (Anode) 4 Key
5 Key 6 GND
7 PON_LED (Anode) 8
1)
VCC or GND
9 PON_LED (Anode) 10 Key pin
11 PON_LED (Cathode/GND)
12 Key pin
Standby LED (Cathode/GND)
13 Message LED (Anode) 14 Key
15 Message LED (Cathode) 16 Not connected
17 Key 18 SCSI LED input (low asserted)
19 HD_LED (Anode) 20 SCSI LED input (low asserted)
21 HD_LED (Cathode) 22 Not connected
23 GND 24 Key
25 Power button (low asserted) 26 GND
2)
27
Sleep button (low asserted) 28 GND
29 Reset button (low asserted) 30 GND
1) Pin 8 is connected to VCC if audio is not onboard.
Pin 8 is connected to GND if audio is onboard.
2) The sleep button (optional) functions only for operating systems with APM (not with ACPI).
1
2
2)
6 - English A26361-D1184-Z180-1-7619
Page 15
Fan 2 connector
1
Pin Signal
1 GND
2 +12 V
3 Fan sense
USB chipcard reader
1
Pin Signal Pin Signal
1 P3V3P_DUAL 2 VCC
3 Data negative up 4 Data positive up
5 Data negative down 6 Data positive down
7 GND 8 GND
9 Not connected 10 VCC auxiliary
11 P3V3P 12 Power OK (high asserted)
13 Chipcard reader On (low pulse) 14 Key
2
Mechanics
Wake On LAN (WOL) connector
1
Pin Signal
1 VCC Auxiliary
2 GND
3 Wake pulse (high asserted)
A26361-D1184-Z180-1-7619 English - 7
Page 16
Mechanics
CD-ROM audio connector (internal)
Pin Signal
1 Left CD audio input
2 CD GND
3 CD GND
4 Right CD audio input
Auxiliary (MPEG, TV) audio connector (internal)
1
1
Pin Signal
1 Left AUX audio input
2 Analog GND
3 Analog GND
4 Right AUX audio input
8 - English A26361-D1184-Z180-1-7619
Page 17
Mechanics
Fan 1 connector
Pin Signal
1 GND
2 Controlled fan voltage (0 V / 6...12 V)
3 Fan sense
Power supply monitoring
Pin Signal
1 Monitor on
2 PS FAN off request (low asserted)
3 PS FAN full on (low asserted)
4 PS FAN pulse
5 SMB CLK
6 SMB DATA
7 VCC EEPROM
8 GND
1
1
Intrusion connector for case open
1
detect for optional push-button
(opener)
Pin Signal
1 GND
2 Case open (low asserted)
3 Intrusion switch present (low asserted)
A26361-D1184-Z180-1-7619 English - 9
Page 18
Mechanics
Configuration
Functions controlled by the configuration switch
Function SKP RCV FWP RES*
Password skip on X X X
Off off X X X
Recovery BIOS X on X X
Off X off X X
Floppy write protect X X on X
Off X X off X
RTC - Reset and Clear CMOS X X X on
Off X X X off
*) Must be in "off" state.
USB power
USB power jumper
1
Pin Signal
1 VCC
2 USB power connection
3 VCC_AUX
Jumper 2-3 Default setting:
If the power supply supports auxiliary voltage the USB interface is
permanently powered except when the main supply is plugged off.
Wakeup from ACPI S1-S4 state possible.
Jumper 1-2 The USB interface is only powered in operating state.
Wakeup from ACPI S1 state possible.
10 - English A26361-D1184-Z180-1-7619
Page 19
Power
Power requirement
Source Voltage Maximum variation Maximum current Comment
Main power supply +5.0 V ±5% 15 A
Main power supply +12 V ±10 % 350 mA
Main power supply -12 V ±10 % 150 mA
Main power supply +3.3 V ±5% 4 A
Auxiliary power supply +5.0 V ±5 % 2 A
Power loadability
Documentation
Fuse
number
Maximum fuse
current
1 750 mA Keyboard port Not specified
2 750 mA Universal serial bus (USB) Port A 500 mA
3 750 mA Universal serial bus (USB) Port B 500 mA
Function Maximum function current
Mouse port Not specified
Game port Not specified
VGA connector Minimum 50 mA
Documentation
Ê Insert the "Drivers & Utilities" CD.
Ê If the CD does not start automatically, run the START.EXE file in the main directory of the CD.
Ê Select your system board or your device.
Ê Select Documentation.
Ê Select - Technical Manuals
Ê Select - Technical Manuals (BIOS)
You may have to install the Acrobat Reader - Software on the CD-ROM (path:
utls/acrobat) before reading!
i
For more details please read the according readme.txt files.
Installing drivers
Ê Insert the "Drivers & Utilities" CD.
Ê If the CD doesn't start automatically call the START.EXE file in the main directory of the CD.
Ê If the system board list is displayed select the system board or select under Driver the
operating system used and the audio and video drivers.
A26361-D1184-Z180-1-7619 English - 11
Page 20
Upgrading main memory
Upgrading main memory
Support: The system needs at least one module and can manage at most three SDRAM
Size: From 32 Mbytes up to 512 Mbytes SDRAM
Technology: PC100 or PC133 unbuffered DIMM modules.
Granularity: For one socket 16, 32, 64, 128 or 256 Mbyte
modules.
168 pin, 3.3 V, 64 bit, 72 bit (with ECC), SDRAM
2M,4M,8M,16Mand32Mx64bit
2M,4M,8M,16Mand32Mx72bit
SDRAM modules with ECC can be plugged in but ECC is not functioning. Mix of
ECC modules with non ECC modules is possible.
Support for up to 3 single sided or 2 double sided DIMM modules.
Troubleshooting
Message BIOS update
The System BIOS provides optimum support for the processor you have chosen. If the message
BIOS update for installed CPU failed
appears the microcode required for the processor inserted must still be loaded. Further information
on this is available in the "BIOS Setup" manual on the "Drivers & Utilities" CD provided.
The screen stays blank
If your screen stays blank this may have the following cause:
The wrong RAM memory module has been inserted
Ê See the chapter "Main Memory" for information which memory modules can be used.
ACPI S3 (Save-to-RAM) and/or ACPI S4 (Save-to-Disk) doesn't work
This system board is fully compliant for ACPI S3 and S4. Therefore it is PC99 certified by Microsoft.
If you have any problems with ACPI please ensure that all of your components are supporting ACPI
S3 and S4.
− Operating system
− Hardware and drivers of controllers (e. g. VGA, audio, LAN, SCSI controllers).
For further information please refer to http://developer.intel.com/technology/iapc/involve.htm .
12 - English A26361-D1184-Z180-1-7619
Loading...