Fujitsu siemens D1115 Schematic
Systembaugruppe D1115 / System board D1115
Standard
Optional
A26361-D1115-Z140
Ausgabe/Edition 08/01
1 Reserviert für Hersteller / Reserved for manufacturer
5 6 78
1234
ON
OFF/OPEN
Standardeinstellung (OFF) darf nicht verändert werden.
Don't change the default setting (OFF).
2 System-BIOS wiederherstellen / BIOS recovery
5 6 78
1234
ON
OFF/OPEN
ON Das System startet von Diskette und ermöglicht die
Wiederholung eines fehlgeschlagenen BIOS-Update.
The system starts from floppy and allows a BIOS recovery.
OFF Das System startet von der Festplatte.
The system starts from the hard disk.
3 Schreibschutz für Disketten / Write protection for floppy disks
1234
5 6
8
OFF/OPEN
7
ON Disketten können nur gelesen werden.
Read only floppy disks.
ON
OFF Disketten können gelesen, beschrieben und gelöscht
werden.
Read, write and delete floppy disks.
4 Reserviert für Hersteller / Reserved for manufacturer
1234
5 6
8
ON
7
OFF/OPEN
Standardeinstellung (OFF) darf nicht verändert werden.
Don't change the default setting (OFF).
5, 6, 7, 8 Taktfrequenz / Clock speed
1234
5 6
8
OFF/OPEN
7
Externe Taktfrequenz 66 MHz / External clock frequency 66 MHz
Internal clock Switch 5 Switch 6 Switch 7 Switch 8
233 MHz off off on on
266 MHz on on off on
300 MHz off on off on
333 MHz on off off on
366 MHz off off off on
400 MHz on on on off
433 MHz off on on off
Externe Taktfrequenz 100 MHz / External clock frequency 100 MHz
Internal clock Switch 5 Switch 6 Switch 7 Switch 8
350 MHz off off on on
400 MHz on on off on
450 MHz off on off on
500 MHz on off off on
ON
COM 1
Mouse
KBD
LPT
USB
IRQ0 = Timer 0
IRQ1 = Keyboard
IRQ2 = Interrupt cascading
IRQ3 = SER2 (COM 2 / COM 4)
Fan
Slot 1 for
Pentium II
or Celeron
Battery
AGP slot
PCI slot 3
PCI slot 2
PCI slot 1
ISA slot
IRQ4 = SER1 (COM1 / COM3)
IRQ5 = ...................................
IRQ6 = Floppy disk controller
IRQ7 = LPT1 / LPT3
Fan
Shared
RAM
1
2
Shared
Do not connect an internal
!
speaker if a buzzer is onboard.
IRQ8 = Real-time clock
IRQ9 = ........................
IRQ10 = ......................
IRQ11 = ......................
Power supply
COM 2 /
Chipcard reader
Floppy disk
IDE (secondary)
On/Off switch
Wake on LAN
IDE (primary)
Front panel
Reset
Power on/off
SCSI
LED
input
Speaker
1
2
HD LED
Message LED
Power on LED
IRQ12 = Mouse
IRQ13 = Numeric proc.
IRQ14 = Primary IDE
IRQ15 = Secondary IDE
Polyscript Carbo weiß (Nr.13-54)
Loading...