Fujitsu Siemens Convertible Bump Case none User Manual

Fujitsu Computer Systems Corporation

Convertible Bump
Case User’s Guide

INSTRUCTIONS

This case is designed to provide a compact, elegant solution
for using and transporting your Fujitsu LifeBook convertible
notebook.

The convertible case is designed so that you can use your
system either in notebook configuration or in tablet
configuration.

Figure 1. Convertible Bump Case

Protective Cover

Pen Holder

Wrap-around Zipper

Figure 2. Closed Case (Top)

To open the case, unzip the wraparound zipper (Figure 2)

and lift the cover. Open the case so that it lies flat.

Prior to installing the notebook into the bump
case, remove the pen. Once the system is
installed, you will not be able to remove the
pen. Store the pen in the pen holder. (Figure 2)

Notebook Configuration

To use your system in notebook configuration (Figure 3):

1. Unzip the case and lay the system into the case base.

2. Open your computer so that the display is in notebook
configuration (perpendicular to the keyboard).

2

Protective Cover

Case Base

.

Figure 3. Notebook Configuration

Tablet Configuration

To use your notebook in tablet configuration:

1. Unzip the case and lay the system into the case base

2. Open your computer so that the display is in notebook
configuration (perpendicular to the keyboard).

3. Fold the top of the case down so the display can rotate
without interference. Rotate the screen and put the
system into tablet configuration. (Figures 4a-4c)

4. Close the case cover and zip up the wraparound zipper.

5. Undo the Velcro® flap securing the protective cover and
flip the cover over the back of the case.

6. Tuck the cover under the handstrap on the back of the
case while in use. There is a small piece of Velcro under
the handstrap to secure the cover when it is open.

3