
AMILO Li2727/2732/2735
WLAN configuration
Windows Vista
Category
Content
Pages
Issue
12/20/2007
Installation paper
WLAN configuration
Use
External
3
1. Activate wireless LAN adapter
• Press Fn+F1 to activate the wireless LAN adapter
• Select “On” in the launch manager and confirm
• Check in BIOS the setting for the wireless LAN adapter, if the red led next to the power led does not light up
o Start AMILO and enter BIOS with F2
o Go to advanced and change the value for the wireless adapter to enabled
2. Software
• Launch Manager
3. Wireless LAN configuration with Windows Vista
• Activate wireless LAN at AMILO and router
• Open Network and Sharing Center
start Control Panel Network and Internet Network and Sharing Center
• Set wireless LAN connection settings
Manage wireless networks Add Manually create a network profile specify network details Connect To
Network and Sharing Center
Select

Inform Issue: 12/20/2007 Category: Installation paper Content: WLAN configuration Use: External Page 2 / 3
List of all network profiles
Possibilities to create a network connection
Select
Specify the information for the wireless network
Insert
SSID = Service Set Indentifier
max. 32 digits
Important: Mark, if SSID
Input box for Security Key

Inform Issue: 12/20/2007 Category: Installation paper Content: WLAN configuration Use: External Page 3 / 3
Connect to a network
Select, if you specified
all information
Network has been recognized
Delivery subject to availability, specifications subject to change without notice, correction of errors
and omissions excepted. All conditions quoted (TCs) are recommended cost prices in EURO excl.
VAT (unless stated otherwise in the text). All hardware and software names used are brand names
and/or trademarks of their respective holders.
Copyright Fujitsu Siemens Computers, 10/2004
Published by department:
Technical Support Consumer Mobile
http://support.fujitsu-siemens.com/com/support/helpdesk.html
http://www.fujitsu-siemens.com/