Fujitsu Client Computing WB0093 Users Manual
Operating Manual
FUJITSU Tablet STYLISTIC Q665
System
Contact
address in North America
FUJITSU
1250
CA
T
"http://solutions.us.fujitsu.com"
"
Have
Copyright
©
AMERICA INC.
East Arques Avenue, Sunnyvale,
94085-3470, U.S.A.
elephone: 800 831 3183 or 408 746 6000
http://solutions.us.fujitsu.com/contact"
a question? Email us at: "AskFujitsu@us.fujitsu.com"
2015 Fujitsu America, Inc. All rights reserved
B5FK-5521-01ENZ0-00
FUJITSU Tablet STYLISTIC Q665
Operating Manual
7
8
10
14
19
23
46
60
68
72
75
85
91
Declarations of conformity
Fujitsu Contact Information
Ports and controls
Important notes
First-time setup of your device
Working with the Tablet PC
Accessories for your Tablet PC
(optional)
Security functions
Connecting external devices
Settings in BIOS Setup Utility
Troubleshooting and tips
Technical data Manufacturer’s
notes
FCC and Regulatory
Information
Appendix
Index
95
99
114
C
opyright and Trademark Information
Fujitsu America, Incorporated has made every effort to ensure the accuracy and completeness
of this document; however, as ongoing development efforts are continually improving the
capabilities of our products, we cannot guarantee the accuracy of the contents of this
document. We disclaim liability for errors, omissions, or future changes.
Fujitsu, the Fujitsu logo and STYLISTIC are registered trademarks of Fujitsu Limited
or its subsidiaries in the United States and other countries.
Intel and Intel Core are trademarks or registered trademarks of Intel Corporation or
its subsidiaries in the United States and other countries.
Microsoft and Windows are either registered trademarks or trademarks of Microsoft
Corporation in the United States and/or other countries.
The ExpressCard word mark and logo are owned by the Personal Computer
Memory Card International Association (PCMCIA) and any use of such marks by
Fujitsu America, Incorporated is under license.
Google is a trademark or registered trademark of Google Incorporated.
Bluetooth is a trademark of Bluetooth SIG, Inc., USA.
OmniPass is a t
Roxio is a trademark of Roxio, a division of Sonic Solutions.
PowerDirector, PowerDVD, YouCam, and MakeDisc are trademarks of CyberLink Corp.
Adobe, Acrobat, and Adobe Reader are either registered trademarks or trademarks of Adobe
Systems Incorporated in the United States and/or other countries.
rademark of Softex, Inc.
Contents
Contents
Declarations of conformity ......................................................................................................................... 7
Fujitsu Contact Information ........................................................................................................................ 8
Notational conventions ................................................................................................................................... 9
Ports and controls ...................................................................................................................................... 10
Important notes ........................................................................................................................................... 14
Safety instructions ......................................................................................................................................... 14
Additional safety notes for devices with wireless components ............................................................... 15
Protecting the display screen ...................................................................................................................... 15
Energy saving ................................................................................................................................................ 15
Energy saving under Windows ............................................................................................................. 15
Traveling with your Tablet PC ...................................................................................................................... 16
Before you travel .................................................................................................................................... 16
Transporting the Tablet PC ................................................................................................................... 17
Waterproof/dustproof (device-dependent) .................................................................................................. 17
Cleaning the Tablet PC ................................................................................................................................. 18
Further information on cleaning the Tablet PC ................................................................................... 18
Cleaning with disinfectant wipes ................................................................................................................. 18
First-time setup of your device ................................................................................................................ 19
Unpacking and checking the device ...........................................................................................................
Choos
e a location ......................................................................................................................................... 20
Connecting the AC adapter ......................................................................................................................... 20
Switching on the device for the first time ................................................................................................... 21
Installing Bonus Apps ............................................................................................................................ 22
Working with the Tablet PC ...................................................................................................................... 23
Status indicators ............................................................................................................................................ 23
Switching the Tablet PC on .......................................................................................................................... 25
Programing the ON/OFF button ........................................................................................................... 25
Switching the Tablet PC off .......................................................................................................................... 26
Handwriting recognition ................................................................................................................................ 26
Touchscreen ............................................................................................................................................................ 27
Select display orientation (portrait or landscape format) ......................................................................... 28
Using fingers .................................................................................................................................................. 28
Calibrate the Dual Digitizer for finger-based operation of the device. ............................................. 28
Actions with one finger (Windows 8.1 Modern) ................................................................................. 29
Actions with one finger (Windows 7 / Windows 8.1 Desktop) .......................................................... 31
Actions with two fingers (Windows 7 / Windows 8.1 Desktop) ........................................................
ng the stylus ............................................................................................................................................. 34
Usi
Stylus location ......................................................................................................................................... 35
Adjusting the stylus ................................................................................................................................ 35
Calibrating the stylus ............................................................................................................................. 36
Securing the stylus tether (optional) .................................................................................................... 36
Tablet buttons ................................................................................................................................................. 37
Webcam.......................................................................................................................................................... 38
Rechargeable battery ................................................................................................................................... 38
Charging and maintaining the battery .................................................................................................
Us
ing the energy saving functions .............................................................................................................. 39
Memory cards ................................................................................................................................................ 40
19
32
38
Fujitsu 3
Contents
Supported formats .................................................................................................................................. 40
Inserting the memory card ..................................................................................................................... 40
Removing the memory card .................................................................................................................. 41
SIM card .......................................................................................................................................................... 42
Inserting a SIM card ............................................................................................................................... 42
Removing a SIM card ............................................................................................................................ 43
Wireless LAN/Bluetooth/4G/LTE/NFC wireless components ................................................................... 43
Switching the wireless components on and off .................................................................................. 43
Configuring WLAN access .................................................................................................................... 43
Further information on WLAN and Bluetooth ...................................................................................... 44
Access via UMTS ................................................................................................................................... 44
Access via Wireless WAN ............................................................................................................................ 44
Access via 4G ......................................................................................................................................... 44
NFC (Near Field Communication, optional) ........................................................................................ 44
Ethernet and LAN (only with performance docking cradle) ..................................................................... 45
GPS ................................................................................................................................................................. 45
Accessories for your Tablet PC (optional) ............................................................................................ 46
Your performance docking cradle (optional) ............................................................................................... 47
Cradle components ................................................................................................................................ 47
S
etting up the cradle .............................................................................................................................. 47
Connecting the Tablet PC to the cradle ............................................................................................... 48
Disconnecting the Tablet PC from the cradle ..................................................................................... 49
Keyboard docking station (optional) ............................................................................................................ 50
Components of the keyboard docking station ..................................................................................... 50
Connecting the Tablet PC to the keyboard docking station .............................................................. 51
Separating the Tablet PC from the keyboard docking station .......................................................... 52
Intermediary VESA Mount Plate (optional) ................................................................................................ 52
Hand strap (optional)..................................................................................................................................... 54
Shoulder strap (optional) .............................................................................................................................. 56
Folio case (optional) ...................................................................................................................................... 58
Security functions ....................................................................................................................................... 60
Configuring the fingerprint sensor ............................................................................................................... 61
Using the Security Lock ................................................................................................................................ 62
Configuring password protection in BIOS Setup Utility ............................................................................ 62
Protecting BIOS Setup Utility (supervisor password and user password) ...................................... 63
Password protection for booting the operating system .....................................................................
64
Password protection for the hard disk ................................................................................................. 64
SmartCard reader (optional) ........................................................................................................................ 65
Inserting the SmartCard ......................................................................................................................... 66
Trusted Platform Module - TPM (device dependent) ................................................................................ 67
Enabling TPM .......................................................................................................................................... 67
Disabling TPM ......................................................................................................................................... 67
onnecting external devices .................................................................................................................... 68
C
Connecting an external monitor................................................................................................................... 68
Micro HDMI port ...................................................................................................................................... 68
HDMI port (performance docking cradle only) .................................................................................... 69
VGA monitor port (only performance docking cradle) ....................................................................... 69
Connecting USB devices .............................................................................................................................. 70
How to remove USB devices correctly ................................................................................................ 70
Connecting external audio devices ............................................................................................................. 71
Connecting headphones or other audio output devices .................................................................... 71
4 Fujitsu
Contents
Connecting a microphone or other audio input devices ................................................................... 71
Settings in BIOS Setup Utility .................................................................................................................. 72
Starting the BIOS Setup Utility .................................................................................................................... 72
BIOS Setup Utility operation ........................................................................................................................ 73
Exiting BIOS Setup Utility ............................................................................................................................. 74
Exit Saving Changes - save changes and exit BIOS Setup Utility .................................................. 74
Exit Discarding Changes - Reject changes and exit BIOS Setup Utility ......................................... 74
Load Setup Defaults – load default values ......................................................................................... 74
Discard Changes - Discard Changes without exiting BIOS Setup Utility ........................................ 74
Save Changes - save changes without exiting the BIOS Setup Utility ........................................... 74
Save changes and power off ................................................................................................................ 74
Troubleshooting and tips .......................................................................................................................... 75
Executing a reset........................................................................................................................................... 76
Forced shutdown .................................................................................................................................... 76
Resetting the rechargeable battery...................................................................................................... 76
Help if problems occur .................................................................................................................................. 76
Recovering your Factory Image ..................................................................................................................
T
he Tablet PC’s date or time is incorrect ................................................................................................... 76
76
Battery indicator does not illuminate ........................................................................................................... 77
The Tablet PC’s touchscreen remains dark ............................................................................................... 77
The display on the Tablet PC’s touchscreen is difficult to read. .............................................................. 77
The external monitor remains blank ........................................................................................................... 78
The external monitor is blank or the image is unstable ........................................................................... 78
The cursor does not correctly follow the stylus movements .................................................................... 78
Stylus input not working ............................................................................................................................... 79
The Tablet PC does not start after switch on ............................................................................................ 79
The Tablet PC stops working ....................................................................................................................... 79
The printer does not print ............................................................................................................................. 80
The wireless connection to a network does not work .............................................................................. 80
The battery discharges too quickly ............................................................................................................. 80
Smart Card reader is not recognized ......................................................................................................... 81
SmartCard PIN forgotten ..............................................................................................................................
Us
er and/or supervisor Smart Card lost ..................................................................................................... 81
81
SmartCard lost ............................................................................................................................................... 81
Acoustic warning ........................................................................................................................................... 82
Error messages on the screen .................................................................................................................... 83
Te
chnical data .............................................................................................................................................. 85
Tablet PC ........................................................................................................................................................ 85
WLAN specifications ..................................................................................................................................... 87
Rechargeable battery ................................................................................................................................... 88
AC adapt
er 65 W for the Tablet PC ............................................................................................................ 88
Performance docking cradle (optional) ...................................................................................................... 88
Keyboard docking station (optional) ........................................................................................................... 89
Intermediary VESA Mount Plate (optional) ................................................................................................ 89
Hand strap (optional) .................................................................................................................................... 89
Shoulder strap (optional) .............................................................................................................................. 89
Cover (optional) ............................................................................................................................................. 90
Manufacturer’s notes ................................................................................................................................. 91
Disposal and recycling .................................................................................................................................. 91
Recycling your battery ........................................................................................................................... 91
Fujitsu 5
Contents
DOC (Industry CANADA) Notices ............................................................................................................... 91
UL Notice ................................................................................................................................................. 92
ENERGY STAR Compliance ........................................................................................................................ 93
Declarations of conformity........................................................................................................................ 94
FCC and IC Regulatory Information ........................................................................................................ 95
Regulatory Notes and Statements .............................................................................................................. 95
Wireless LAN, Health and Authorization for use ................................................................................ 95
Regulatory Information/Disclaimers ..................................................................................................... 95
Federal Communications Commission and Industry Canada statement: ....................................... 95
Déclaration d’Industrie Canada ............................................................................................................ 96
FCC Interference Statement ................................................................................................................. 96
FCC Radio Frequency Exposure statement ....................................................................................... 96
Déclaration de la FCC/d’Industrie Canada sur l’exposition aux radiofréquences .......................... 97
Export restrictions ................................................................................................................................... 97
Restrictions concernant l’exportation ................................................................................................... 97
Canadian Notice ..................................................................................................................................... 97
Avis pour le Canada ............................................................................................................................... 98
Appendix ....................................................................................................................................................... 99
Before Using the Optional Wireless LAN ................................................................................................... 99
Wireless LAN Devices Covered by this Document ............................................................................
C
haracteristics of the WLAN Device .................................................................................................... 99
Wireless LAN Modes Using this Device .............................................................................................. 99
Deactivating/Disconnecting the WLAN Device .................................................................................102
Configuring the Wireless LAN ....................................................................................................................102
Connection to the network ...................................................................................................................102
Troubleshooting the WLAN .................................................................................................................102
Image Backup and Recovery Procedures ...............................................................................................104
Creating a Backup of Bootable Disk and Recovery Image .............................................................105
RECOVER YOUR SYSTEM WHEN THE HARD DRIVE IS STILL ACCESSIBLE .............................106
Using the Recovery and Utility Tools .............................................................................................................. 106
Restore the Recovery Image from Hidden Partition ........................................................................108
RECOVER YOUR SYSTEM WHEN THE HARD DRIVE IS NOT BOOTABLE ..................................109
Restore the Recovery Image for Full Hard Drive .............................................................................109
Recovering Your Recovery Image Using Recovery and Utility (for new hard drive or
non-bootable hard drive) ..................................................................................................................... 110
Installing the Software after the Recovery Image is Restored ....................................................... 111
Index .............................................................................................................................................................
99
114
6 Fujitsu
Declarations of conformity
Declarations of conformity
DECLARATION OF CONFORMITY
according to FCC Part 15
Responsible Party Name: Fujitsu America, Inc.
Address:
Telephone:
Declares that product: Base Model Configuration: STYLISTIC Q665
This device complies with Part 15 of the FCC rules. Operations are subject to the
following two conditions: (1) This device may not cause harmful interference. (2) This
device must accept any interference received, including interference that may cause
undesired operation.
1250 E. Arques Avenue
Sunnyvale, CA 94085
(408) 746-6000
Complies with Part 15 of the FCC Rules.
Fujitsu 7
Fujitsu Contact Information
Fujitsu Contact Information
Service and Support
You can contact Fujitsu Service and Support in the following ways:
•
Toll free phone: 1-800-8Fujitsu (1-800-838-5487)
•
Website: "http://solutions.us.fujitsu.com/www/content/support/contact/index.php"
Before you place the call, have the following information ready so that the customer
support representative can provide you with the fastest possible solution:
•
Product name
•
Product configuration number
•
Product serial number
•
Purchase date
•
Conditions under which the problem occurred
•
Any error messages that have occurred
•
Type of device connected, if any
Fujitsu Shopping Online Please go to "http://www.shopfujitsu.com/store/ " Maintaining Latest Configuration To ensure that you always have the most current driver updates related to your system, occasionally
access the Fujitsu Software Download Manager (FSDM) utility. The FSDM utility is available from
the Fujitsu Support site. FSDM will allow you to view a list of the most current drivers, utilities
and applications to determine whether you have the latest versions. If you have a Windows 7
or or Windows 8/8.1 operating system, you will need to go to the Support Site to download the
FSDM Utility: "http://support.fujitsupc.com/CS/Portal/support.do?srch=DOWNLOADS".
Limited Warranty Your STYLISTIC Tablet PC is backed by a Fujitsu International Limited Warranty. Check the service
kit that came with your Tablet PC for the Limited Warranty period and terms and conditions.
.
8 Fujitsu
Fujitsu Contact Information
Notational conventions
Pay particular attention to text marked with this symbol. Failure to observe
Indicates important information which is required to use the device properly.
►
indicates an activity that must be performed
indicates a result
This style
indicates data entered using the keyboard in a program dialogue or at
start.exe
This style
indicates information that is displayed on the screen by a program, e.g.:
Installation is complete.
This style
indicates
"This style"
indicates
Key
indicates a key on the keyboard, e.g:
F10
This style
indicates terms and text that are emphasized or highlighted, e.g.: Do not
switch off the device
4
this warning will endanger your life, will damage the device or lead to loss
of data. The warranty will be invalidated if the device becomes defective
through failure to observe these warnings.
the command line, e.g. your password (Name123) or a command used to
start a pr
•
•
•
•
•
ogram (
terms and texts used in a software interface, e.g.: Click on Save.
names of programs or files, e.g. Windows or setup.exe.
Cross-references to another section, e.g. "Safety information"
cross-references to an external source, e.g. a web address: For more
information, go
names of CDs, DVDs and titles or designations of other materials, e.g.:
"CD/DVD D
to "http://solutions.us.fujitsu.com/"
rivers & Utilities" or "Safety/Regulations" manual
)
Fujitsu 9
Ports and controls
Ports and controls
This chapter presents the individual hardware components of your device. It gives an
overview of the indicators and connections of the device. Please familiarize yourself
with these items before you start to work with the device.
Front (figure does not show the water-resistant device variant)
1
2
3
6
8
1 = Touchscreen
2 = Webcam LED
3 = Webcam
4 = Ambient light sensor
5 = Power-on indicator
4
5
7
6
6 = Mechanical mounting for keyboard
docking station / cradle
7 = Docking port
8 = Windows button
10 Fujitsu
Ports and controls
1
2
3
4
5 6 7 8
1
2
3
4
5 6 7 8
Left side (top - water-resistant device variant, bottom - non water-resistant device variant)
1 = Tether eyelet for stylus tether
2 = Combined headphones and microphone
port (water-resistant device variant:
water-resistant)
3 = Storage card slot (water-resistant device
variant: protected by cover)
4 = SIM card slot (water-resistant device
variant: protected by cover)
5 = Status indicators
6 = Micro-HDMI port (water-resistant device
variant: protected by cover)
7 = Speaker
8 = DC jack (DC IN, water-resistant device
variant: protected by cover)
Fujitsu 11
Ports and controls
1
2
3
4
5 6
7
8
9
10
1
2 3 4
5 6
7
8
9 10
Right side (top - water-resistant device variant, bottom - non water-resistant device variant)
1 = Security Lock device
2 = Speaker
3 = Shortcut button
4 = Decrease volume button
5 = Increase volume button
6 = ON/OFF button
7 = USB port (USB 2.0, water-resistant device
variant: protected by cover)
8 = USB port (USB 3.0, water-resistant device
variant: protected by cover)
9 = Stylus slot
10 = Eyelet for stylus cord
12 Fujitsu
Ports and controls
Back (top - water-resistant device variant, bottom - non water-resistant device variant)
1
2
3
4
= Webcam LED
=
=
= Fingerprint sensor
5 = SmartCard reader (device dependent)
###=
(device-dependent)
### Position? ###
1
2
3
4
5
1
2
3
4
Webcam
Camera light
Fujitsu 13
NFC (Near Field Communication)
Important notes
Important notes
This chapter contains essential safety information which must be followed when working
with your Tablet PC. The other notes provide useful inform ation about your Tablet PC.
Safety instructions
Please follow the safety notes provided in the "Safety/Regulations" manual
as well as the safety notes given below.
Please pay special attention to the sections in the manual marked
with the symbol on the left.
When connecting and disconnecting cables, observe the relevant
notes in this operating manual.
Read the information on the ambient conditions in the "Technical data", Page 85 chapter
and the information in the "First-time setup of your device", Page 19 chapter before
preparing your Tablet PC for use and switching it on for the first time.
When cleaning the device, please observe the relevant notes in the
section "Cleaning the Tablet PC", Page 18.
Pay attention to the additional safety notes for devices with wireless components
provided in the "Safety/Regulations" manual.
When handling this device, you come into contact with lead, a chemical which in
California is held to be a possible cause of birth defects and other damage to fertility.
Wash your hands after using the device.
This Tablet PC complies with the relevant safety regulations for data processing equipment. If
you have questions as to whether you can set up the Tablet PC in the intended environment,
please contact your sales outlet or our hotline/service desk.
14 Fujitsu
Important notes
Additional safety notes for devices with wireless components
If a wireless component (Wireless LAN, Bluetooth, 4G) is integrated in your Tablet PC, you must
be sure to observe the following safety precautions when using your Tablet PC:
•
Switch off the wireless components when you are in an aircraft or driving in a car.
•
Switch off the wireless components when you are in a hospital, an operating
room or near a m
mpair the operation of medical devices.
i
•
Switch off the wireless components, when you let the device get near flammable
gases or i
transmitted r
For further information on how to switch the wireless components on and off, refer
to section "Switching the wireless components on and off", Page 43.
edical electronics system. The transmitted radio waves can
nto hazardous environments (e.g. gas station, paint stores), as the
adio waves can cause an explosion or a fire.
Protecting the display screen
Depending on your device configuration, where applicable your device is not waterproof.
In this event, do not pour liquids onto the device and do not wash it with a wet cloth.
Do not place items on the top of the display, or damage may occur.
The warranty does not cover a scratched screen.
Energy saving
If you will not be using your Tablet PC, switch it off. Switch off any connected external devices when
they are not in use. If you use the energy-saving f unct ions, t he Tablet PC uses less power. If you do
this, you will be able to work longer with the Tablet PC before having to recharge the battery.
The energy efficiency is increased and environmental pollution is reduced.
You save money and help protect the environment.
Energy saving under Windows
► Make use of the available energy-saving functions as described in chapter
"Using t
Fujitsu 15
he energy saving functions", Page 39.
Important notes
Traveling with your Tablet PC
Power connection
Travel destination
United States, Canada, Mexico, parts of Latin
Russia and the Commonwealth of Independent
United Kingdom, Ireland, Malaya, Singapore,
China, Australia, New Zealand
Please follow the instructions below when traveling with your Tablet PC.
Before you travel
► Back up important data stored on your hard disk.
► Switch off the wireless component for data security reasons. With data traffic via a wireless
connection, it is a
lso possible for unauthorized third parties to receive data.
Information on activating data encryption is provided in the documentation
for your wireless component.
► If you want to use your Tablet PC during a flight, ask the flight attendants to seeit is safe to use it.
When traveling in other countries
► If you are traveling abroad, check that the AC adapter can be operated with the
local AC v
your Tablet PC. Do not use any other voltage converter!
► Check whether the local AC voltage and the AC cable are compatible. If this is not
the c
► Enquire with the appropriate government office of the country you will be traveling in as to
whether y
► T
ake the necessary travel adapters with you when traveling abroad. Check in the following
table f
oltage. If this is not the case, obtain the appropriate AC adapter for
ase, buy an AC cable that suits the local conditions.
ou may there operate the wireless component integrated in your Tablet PC.
or which travel adapters you will need, or ask your travel organizer.
America, Japan, Korea, Philippines, Taiwan
States (CIS), much of Europe, parts of Latin
America, the Middle East, parts of Africa, Hong
Kong, India, much of south-east Asia
parts of Africa
16 Fujitsu
Important notes
Transporting the Tablet PC
Protect the Tablet PC from severe shocks and extreme temperatures
(e.g. direct sunlight in a car).
•
Do not transport your Tablet PC while it is turned on.
•
Carry your Tablet PC with you while traveling. Do not check it in as baggage.
•
Never put your Tablet PC through a metal detector. Have it hand-inspected by
security per
tuned X-ra
the m
security per
on. So m
► Switch the Tablet PC off.
► Unplug the AC plug of the AC adapter and all external devices from the power outlets.
► Disconnect the AC adapter cable and the data cables for all external devices.
► To protect against damaging jolts and bumps, use a suitable Tablet PC
carrying c
ase to transport your Tablet PC.
sonnel. You can however put your Tablet PC through a properly
y machine. To avoid problems, place it close to the entrance of
achine and remove it as soon as possible or have it hand-inspected by
sonnel. Security officials may require you to turn your Tablet PC
ake sure you have a charged battery on hand for this.
Waterproof/dustproof (device-dependent)
Protection class IPX5 stipulates that the tablet can be operated normally after it has been sprayed
with water for at least 3 minutes through an opening of 6.3 mm / 0.25 inches diameter and with a
flow rate of 12.5 liters of water per minute from a distance of about 3 meters / 118.11 inches.
Protection class IPX8 stipulates for your Tablet PC that it can be operated normally
after it has been submerged in tap water at room temperature for 30 minutes
and to a depth of 1.50 meters / 59.05 inches.
Furthermore, protection class IP5X stipulates that the Tablet PC can be left in an environment with
dust particles of up to 75 μm diameter for 8 hours and can then still be operated safely.
To be certain that the device remains waterproof and dustproof, the covers of the ports
and the cover of the DC jack socket (DC IN) must always remain closed. Chapters "SIM
card", Page 42 and "Memory cards", Page 40 describe how ports can be opened and
securely sealed again. Otherwise, water can enter the Tablet PC and cause a malfunction.
Make certain that water in the area of the headphone and microphone socket is wiped
away immediately, otherwise a malfunction or electric shock could occur.
If the Tablet PC comes into contact with salt water, soft drinks or
mud, it must be washed off immediately.
Fujitsu 17
Important notes
Cleaning the Tablet PC
•
Use of incorrect cleaners can result in optical impairment of the LCD and / or
damage to t
material safety data sheets for proper handling and use of the products.
•
Never use ammonia, acidic, or alkaline cleaners or organic chemicals
such as pai
finishes and the coating of the LCD screen.
•
Never use compressed air for cleaning your computer.
•
If your Tablet PC has a Smart Card slot, be very careful to avoid any
liquid ent
Further information on cleaning the Tablet PC
The Tablet PC does not float.
he computer. Always refer to the cleaner manufacturer’s guidelines and
nt thinner, acetone or kerosene. It may damage surface
ering the slot as this can damage the unit.
If the Tablet PC is exposed to water or other liquids with its connections open, liquid
can penetrate the Tablet PC and cause a malfunction. Do not continue to use the
Tablet PC. Switch it off and contact our hotline / our service desk (see enclosed list of
service desks or visit our website at: "http://www.fujitsu.com/us/support/").
Cleaning with disinfectant wipes
There are many ways of disinfecting surfaces. The following disinfectant wipes
have been tested successfully with the Tablet PC:
•
MG Chemicals Multipurpose Alcohol Wipes (alcohol-based)
•
PROSAT® Sterile™ PS-911EB/EtOH Life Sciences Wipes (alcohol-based)
•
Clorox® Healthcare Bleach Germicidal Wipes (without alcohol)
Remember, if your Tablet PC is configured with the Smart Card shell, it does not
have a cover to close the port and liquid could enter and damage the device. Take
extra precautions when cleaning around the Smart Card reader.
For proper use of disinfectant wipes, please read the manufacturer’s instructions.
Before cleaning, please test the disinfectant wipe on a small area of the Tablet
PC. Some medical disinfectant wipes may leave residue on the Tablet PC which
is difficult to remove again, or they may dry out quickly. Therefore dispose of
the wipes after one single use and do not reuse them.
18 Fujitsu
First-time setup of your device
First-time setup of your device
Please read the chapter "Important notes", Page 14.
If your device is equipped with a Windows operating system, the necessary
hardware drivers and supplied software are already pre-installed.
Before switching it on for the first time, connect the device to the AC voltage using
the AC adapter, see "Connecting the AC adapter", Page 20. The AC adapter must
remain connected during the whole of the installation process.
A system test is performed when your device is first switched on. Various messages
can appear. The display may remain dark for a short time or may flicker.
Please follow the instructions on the screen.
NEVER switch off your device during the first-time setup process.
The battery must be charged if you want to operate your device using the battery.
When used on the move, the built-in battery provides the device with the necessary power. You
can increase the operating time by using the available energy-saving functions.
For instructions on how to connect external devices (e.g. mouse, printer) to your Tablet
PC, please refer to the operating manual for your device.
Unpacking and checking the device
If you find that damage has occurred during transport, please notify
your local sales outlet immediately!
► Unpac
► Check your device for any visible damage which may have occurred during transportation.
Fujitsu 19
k all the individual parts.
You may need to reuse the packaging in the future, for example if
you need to ship your device.
First-time setup of your device
Choose a location
Choose a suitable location for the device before setting it up. In doing
so, please follow these instructions:
•
Never place the device or the AC adapter on a heat-sensitive surface.
The surface c
•
Never place the device on a soft surface (e.g. carpeting, upholstered furniture,
bed). This c
•
The back of the device heats up during normal operation. Prolonged contact
with skin c
•
Place the device on a stable, flat, non-slippery surface. Please note that the
rubber feet of t
•
Keep other objects at least 100 mm / 4 inches away from the device
and its AC adap
•
Do not expose the device to extreme environmental conditions. Protect
the device agai
ould be damaged as a result.
an result in damage caused by overheating.
an become unpleasant or even result in burns.
he device may mark certain types of delicate surfaces.
ter to ensure adequate ventilation.
nst dust, humidity and heat.
Connecting the AC adapter
Observe the safety notes in the enclosed "Safety/Regulations" manual.
The supplied AC cable conforms to the requirements of the country in which
you purchased your device. Make sure that the AC cable is approved for
use in the country in which you intend to use it.
3
2
► Connect the AC cable (1) to the AC adapter.
► Plug the AC cable (2) into a power outlet.
► Connect the AC adapter cable (3) to the
DC jack (
DC IN) of the device.
1
20 Fujitsu
First-time setup of your device
Switching on the device for the first time
To make it easier to use your device for the first time, the operating system
is pre-installed on the hard disk.
2
1
2
► Press the ON/OFF button (1) for about one second to switch the device on.
The power-on indicators (2) light up whenever the system is switched on.
4
► During the installation process, follow the on-screen instructions.
You can find information and help on the Windows operating system
functions online at "http://windows.microsoft.com".
If a Windows 8.1 operating system is installed on your Tablet PC, a tutorial
is automatically started when a new user logs on for the first time to show
you how to use the new functions of Windows 8.1.
Fujitsu 21
First-time setup of your device
Installing Bonus Apps
or
►
After you have started your system the first time, you will see a Bonus Apps icon on your desktop.
► Click on the icon to see which additional applications are available for you to install.
Applications that are already installed appear in grey, those that are
4
available for installation appear in blue.
► Select the applications you wish to install by selecting the checkbox adjacent to your selection.
► Click Select All if you would like to install all available applications.
To confirm your selection, click Install.
Note that in some cases (depending upon which application was selected for
installation) after installation completes, the system will prompt you to reboot.
There are also cases in which if multiple applications are selected to install
but one of them needs a reboot, the system will reboot and continue
installing the rest of the selected applications.
22 Fujitsu
Working with the Tablet PC
Working with the Tablet PC
Please refer to the notes in the chapter "Important notes", Page 14.
Status indicators
The
supply, the drives and the keyboard functions, etc.
1
1 2 3
This chapter describes the basics for operating your Tablet PC. You can find instructions
on how to connect external devices (e.g. mouse, flash storage) to the Tablet PC in
the chapter "Connecting external devices", Page 68.
status indicators (1, 2, 3) provide information about the status of the power
Fujitsu 23
Working with the Tablet PC
No.
Status indicator
Description
1
Power-on indicator
•
2
Battery charging indicator
3
Wireless indicator
The indicator lights up white: The Tablet PC is
switched on.
•
The indicator flashes: The Tablet PC is in sleep mode
(Save-to-R
•
The indicator is not lit up: The Tablet PC is switched
off or in S
•
The indicator lights up orange: The rechargeable
battery is c
•
The indicator is not lit up: The battery is not charging
(the battery is already fully c
is not c
•
The indicator lights up white: The wireless components
are s
•
The indicator flashes: The wireless components are
switched on wh
Save-to-Di
AM).
ave-to-Disk mode.
harging.
harged or the AC adapter
onnected).
witched on while the Tablet PC is switched on.
ile the Tablet PC is in Sleep mode or
sk mode, or while the Tablet PC is switched
off.
•
The indicator is not lit up: The wireless components
are s
witched off.
24 Fujitsu
Working with the Tablet PC
►
4
Programing
You
Switching the Tablet PC on
Operating system
Menu
Windows 7
Start - (Settings) - Control Panel - System and
Windows 8.1
Windows 8.1 Desktop - Control Panel - Hardware
2
1
2
Press the ON/OFF button (1) for about one second to switch the device on.
The power-on indicators (2) light up whenever the system is switched on.
the ON/OFF button
can program the ON/OFF button:
If you have assigned a password, you must enter this when requested to
do so in order to start the operating system. Detailed information can be
found in the chapter "Security functions", Page 60.
Fujitsu 25
Security - Power Options
and Sound - Power Options
Working with the Tablet PC
Switching the Tablet PC off
Back up your data and close all applications before you switch off your
device. Otherwise data might be lost.
ut down the operating system correctly.
► Sh
► If the Tablet PC does not switch itself off automatically, press the ON/OFF
button for appr
ox. five seconds.
Handwriting recognition
For detailed information on handwriting recognition, see the documentation for your operating system.
At present, handwriting recognition under Windows 7 or Window 8.1 supports the following languages:
English, German, French, Italian, Japanese, Korean, Chinese (t radi tional and simplified), Dutch,
Portuguese, Spanish, Brazilian, Norwegian (Bokmål and Nynorsk), Swedish, Finnish, Danish,
Polish, Rumanian, Serbian (Cyrillic and Latin script), Catalan, Russian, Czech and Croatian.
Under Windows 8.1 you can set the required language under Control Panel –
Time, Language and Region – Language.
26 Fujitsu
Working with the Tablet PC
Touchscreen
High-quality LCD screens (TFT) are installed in Fujitsu Tablet PCs. For technical reasons,
these screens are manufactured for a specific resolution. An optimal, clear picture can
only be ensured in the resolution intended for the particular screen. A screen resolution
which differs from the specification can result in an unclear picture.
The screen resolution of your Tablet PC’s touchscreen is optimally set at the factory.
Current production technology cannot guarantee an absolutely fault-free screen display. A few
isolated constantly lit or unlit pixels (picture elements) may be present. The maximum permitted
number of such faulty pixels is specified in the international standard ISO 9241-307 (Class 2).
Example: A monitor with a resolution of 1,280 x 800 has 1,280 x 800 = 1,024,000 pixels. Each pixel consists of
three subpixels (red, green and blue), so there are almost 3 million subpixels in total. According to ISO
9241-307 (class 2), a maximum of 2 light and 2 dark pixels and in addition 5 light or 10 dark subpixels
or an equivalent mix (1 light subpixel counts as 2 dark subpixels) are allowed to be defective.
Pixel
Subpixel
Cluster
Background lighting LCD screens are operated with background lighting. The luminosity of the background
lighting can decrease over the period of use of the Tablet PC. However, you can
adjust the brightness of your monitor yourself.
Ambient light sensor If your notebook was shipped with the Windows operating system, the screen brightness is
regulated by the ambient light sensor and is dependent on the particular light conditions.
This results in optimum readability and longer battery life at the same time.
If your notebook was shipped with Windows 8.1, the adaptive brightness setting is deactivated. To
change the ambient light sensor settings, select Control Panel - System and Security - Power Options -
Change plan settings - Change advanced power settings - Display - Activate adaptive brightness setting..
Select On to activate the adaptive brightness setting with the help of the ambient light sensor.
A pixel consists of 3 subpixels, normally red, green and
blue. A pixel is the smallest element that can be generated
by complete functionality of the display.
A subpixel is a separately addressable internal structure
within a pixel that enhances the pixel function.
A cluster contains two or more defective pixels or
subpixels in a 5 x 5 pixel block.
Synchronizing the display on the touchscreen and an external monitor In Windows 7, you can switch between touchscreen and external monitor, if you open
Control Panel - Windows Mobility Center, section External Display.
In Windows 8.1 wipe your finger over the screen from the right-hand edge. The setting
Charms - Devices - Second monitor opens. Select the desired output type.
You can also use the Fujitsu Display Manager in the Windows Mobility Center to set the output type.
Fujitsu 27
Working with the Tablet PC
Select display orientation (portrait or
Operating system
Menu
Windows 7 /
To calibrate, run the Hardware and Sound / Tablet PC Settings function in the
landscape format)
You can choose to use either portrait or landscape format for the display.
Windows 7 You can change these settings in the Fujitsu menu or under Start - (Settings -)
Control Panel - Hardware and Sound - Display - Settings.
indows 8.1
W
You can change these settings under Windows 8.1 Desktop - Control Panel Hardware and Sound - Windows Mobility Center / Rotate screen.
In t
he Fujitsu Tablet Controls settings, profiles are saved for operation
with different screen orientations. These profiles have preset standard
configurations that can be modified as desired.
These settings do not just affect the monitor settings on the Tablet PC,
but also on external monitors that are connected.
Using fingers
You can execute certain commands by using your finger tip on the touchscreen of your device.
Alternatively, everything which you can select or activate using your finger
tip can also be selected or activated using the stylus.
Calibrate the Dual Digitizer for finger-based operation of the device.
Before the first finger-based operation, you must calibrate your Tablet PC via the
operating system, so that it recognizes your fingertips as accurately as possible.
As soon as you notice that the accuracy is becoming worse, you
must recalibrate the device.
Please note: There are separate calibration programs available for calibrating
the stylus and for calibrating finger-based operation. Do not use the calibration
tool for the stylus to calibrate finger-based operation.
Windows 8.1 Desktop
Control Panel. You need to calibrate both portrait and landscape formats.
28 Fujitsu
Loading...