Fujitsu Client Computing EM7355D3 Users Manual

Operating Manual

FUJITSU Tablet STYLISTIC Q616

System

Contact address in North America

FUJITSU AM

ERICA INC.

1250 East Arques Avenue, Sunnyvale,

CA 94085-3470, U.S.A.

e: 800 831 3183 or 408 746 6000

Telephon

http://solutions.us.fujitsu.com"

"http://solutions.us.fujitsu.com/contact"

Have a qu

estion? Email us at:

"AskFujitsu@us.fujitsu.com"

reserved

ujitsu America, Inc. All rights

B5FK-6121-01ENZ0-00

FUJITSU Tablet STYLISTIC Q616

Operating Manual

Declarations of conformity 7

Fujitsu Contact Information 8

Ports and controls 10

Important notes 13

First-time setup of your device 18

WorkingwiththeTabletPC 22

Accessories for your Tablet PC (optional) 45

Security functions 57

Connecting external devices 64

Settings in BIOS Setup Utility 68

Troubleshooting and tips 71

Technical data 81

Manufacturer’s notes 86

Declarations of conformity 89

FCC and IC Regulatory Information 90

Appendix 94

Index 109

Fujitsu America, Incorporated has made every effort to ensure the accuracy and completeness of this document; however, as ongoing development efforts are continually improving the capabilities of our products, we cannot guarantee the accuracy of the contents of this document. We disclaim liability for errors, omissions, or future changes.

Fujitsu, the Fujitsu logo and STYLISTIC are registered trademarks of Fujitsu Limited or its subsidiaries in the United States and other countries.

Intel and Intel Core are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries.

Microsoft and Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.

The ExpressCard word mark and logo are owned by the Personal Computer Memory Card International Association (PCMCIA) and any use of such marks by Fujitsu America, Incorporated is under license.

Google is a trademark or registered trademark of Google Incorporated. Bluetooth is a trademark of Bluetooth SIG, Inc., USA. OmniPass is a trademark of Softex, Inc. Roxio is a trademark of Roxio, a division of Sonic Solutions. PowerDirector, PowerDVD, YouCam, and MakeDisc are trademarks of CyberLink Corp. Adobe, Acrobat, and Adobe Reader are either registered trademarks or trademarks of Adobe

Systems Incorporated in the United States and/or other countries.

Contents

Declarations of conformity ............................................................. 7

Fujitsu Contact Informatio

Notational conventions .................................................................. 9

Portsandcontrols ..................................................................... 10

Importantnotes ........................................................................ 13

Safety instructions ...................................................................... 13

Additional safety note Protecting the displa

Energy saving .......................................................................... 14

Energy saving under W

Traveling with your T

Beforeyoutravel ................................................................... 15

Transporting the T

Cleaning the Table

Further informat

Cleaning with dis

First-time setupof your device ......................................................... 18

Unpacking and checking the device . . . ................................................... 18

Choose a location . ...................................................................... 19

Connecting the AC adapter . . . ........................................................... 19

Switching on the device for the ﬁrsttime .................................................. 20

Installing Bonus Apps . . . . . ........................................................... 21

Working with

Status indic Switching t

Programing Switching t Handwriti Touchscr Select di Using ﬁng

Using t

Tabl Webc Rech

Usi Mem

ng recognition ..................................................................

een ............................................................................

splayorientation(portraitorlandscapeformat) ....................................

ers ...........................................................................

Calibra Actions Actions Action

he stylus .........................................................................

Stylus

ting thestylus ..................................................................

Adjus

rating thestylus ................................................................

Calib

ingthestylustether(optional) ...................................................

Secur

et buttons ..........................................................................

am ...............................................................................

argeablebattery ...................................................................

rgingand maintainingthebattery .................................................

Cha

ng the energy saving functions . .......................................................

orycards ..........................................................................

pported formats ..................................................................

tPC ..................................................................

infectantwipes ..........................................................

theTablet PC ............................................................

ators ........................................................................

he TabletPCon ..............................................................

theON/OFFbutton ......................................................

he TabletPCoff ..............................................................

te the Dual Digitizer for ﬁnger-based operation of the device. .....................

with one ﬁnger (Windows 8.1 Modern) . ........................................

with one ﬁnger (Windows 7 / Windows 8.1 Desktop) . . . .........................

s with two ﬁngers (Windows 7 / Windows 8.1 Desktop) . . .........................

location ......................................................................

n ............................................................

s for devices with wireless components .. .............................

yscreen ............................................................

indows .......................................................

abletPC ............................................................

abletPC ...........................................................

iononcleaning theTablet PC .........................................

14 14

14 15

16 16 16 17

22 24 24 25 25 26 27 27 27 28 30 31 33 34 34 35 35 36 37 37 37 38 39 39

Fujitsu 3

Contents

Insertingthe memorycard ........................................................... 39

Removing thememory card .......................................................... 40

SIMcard ............................................................................... 41

Insertinga SIM card ................................................................. 41

Removing aSIMcard ............................................................... 42

WirelessLAN/Bluetooth/4G/LTE/NFC wireless components ................................. 42

Switching the wireless components on and off ......................................... 42

ConﬁguringWLAN access ........................................................... 42

Furtherinformation on WLANandBluetooth ........................................... 43

Access viaUMTS ................................................................... 43

Access viaWireless WAN ............................................................ 43

Access via4G ...................................................................... 43

NFC (Near Field Communication, optional) . . . ......................................... 43

EthernetandLAN(only withperformance dockingcradle) .................................. 44

GPS ................................................................................... 44

Accessories for your Tablet PC (optional) . ............................................. 45

Your performance docking cradle (optional) . . ............................................. 46

Cradle components . . ................................................................ 46

Settingupthecradle ................................................................ 46

Connecting the Tablet PC to the cradle . . ............................................. 47

Disconnecting the Tablet PC from the cradle . ......................................... 48

Keyboard cover (optional) . . . ............................................................ 49

Components of the keyboard cover . . ................................................. 49

Connecting the Tablet PC to the keyboard cover . . . . . .................................. 50

Separating the Tablet PC from the keyboard cover . . . .................................. 51

Shoulder strap (optional) ................................................................ 51

Folio case (optional) . . . . . ................................................................ 52

Protective TPU cover with kickstand and handstrap (optional) . .............................. 54

Security functions ..................................................................... 57

Conﬁguring the ﬁngerprint sensor ........................................................ 57

Usingthe SecurityLock ................................................................. 58

Conﬁguring password protection inBIOSSetupUtility ...................................... 58

Protecting BIOS Setup Utility (supervisor password and user password) . . ............... 59

Password protection for booting the operating system .................................. 60

Password protection fortheharddisk ................................................. 60

SmartCard reader (optional) . ............................................................ 62

Insertingthe SmartCard ............................................................. 62

Trusted Platform Module - TPM (device dependent) . . . . . . .................................. 63

EnablingTPM ....................................................................... 63

Disabling TPM ...................................................................... 63

Connecting external devices ........................................................... 64

Connecting an external monitor . . ........................................................ 64

MicroHDMIport .................................................................... 64

HDMI port(performancedocking cradle only) .......................................... 65

VGAmonitor port(only performancedockingcradle) ................................... 65

Connecting USB devices ................................................................ 66

Howto remove USB devicescorrectly ................................................ 66

Connecting external audio devices . . . . . . ................................................. 67

Connecting headphones or other audio output devices . . . .............................. 67

Connecting a microphone or other audio input devices . . . .............................. 67

4 Fujitsu

Contents

Settings in BIOS Setup Utility . . . ....................................................... 68

StartingtheBIOS SetupUtility ........................................................... 68

BIOS SetupUtilityoperation ............................................................. 69

ExitingBIOSSetupUtility ................................................................ 70

Exit Saving Changes - save changes and exit BIOS Setup Utility . . ..................... 70

Exit Discarding Changes - Reject changes and exit BIOS Setup Utility .. . . . .............. 70

Load Setup Defaults – load default values ............................................. 70

Discard Changes - Discard Changes without exiting BIOS Setup Utility . . . . .............. 70

Save Changes - save changes without exiting the BIOS Setup Utility . . . . . . .............. 70

Save changesandpoweroff ........................................................ 70

Troubleshooting andtips .............................................................. 71

Executinga reset ....................................................................... 72

Forced shutdown .................................................................... 72

Resetting the rechargeable battery . ................................................... 72

Help ifproblemsoccur ................................................................... 72

Recoveringyour FactoryImage .......................................................... 72

TheTabletPC’s dateortimeis incorrect .................................................. 72

Battery indicator does not illuminate . . . ................................................... 73

TheTabletPC’s touchscreenremains dark ................................................ 73

The display on the Tablet PC’s touchscreen is difﬁcult to read. . ............................. 73

Theexternalmonitorremains blank ...................................................... 74

Theexternalmonitorisblankortheimageisunstable ..................................... 74

The cursor does not correctly follow the stylus movements . . . . ............................. 74

Stylus inputnotworking ................................................................. 75

TheTabletPC doesnotstart afterswitch on ............................................... 75

TheTabletPC stops working ............................................................. 75

The printer does not print . . . . . ........................................................... 76

The wireless connection to a network does not work . . . .................................... 76

Thebattery dischargestoo quickly ........................................................ 76

Smart Card reader is not recognized . . . ................................................... 77

SmartCardPIN forgotten ................................................................ 77

User and/or supervisor Smart Card lost . . . . . . ............................................ 77

SmartCardlost ......................................................................... 77

Acousticwarning ........................................................................ 78

Errormessageson thescreen ........................................................... 79

Technical data ......................................................................... 81

Tablet PC .............................................................................. 81

WLAN speciﬁcations .................................................................... 83

Rechargeablebattery ................................................................... 84

AC adapter 65 W for the Tablet PC ....................................................... 84

Performance docking cradle (optional) . ................................................... 84

Keyboard cover(optional) ............................................................... 85

Shoulder strap (optional) . . . . . ........................................................... 85

Foliocase(optional) ..................................................................... 85

ProtectiveTPUcoverwithkickstand and handstrap ........................................ 85

Manufacturer’s notes .................................................................. 86

Disposal andrecycling .................................................................. 86

Recycling yourbattery ............................................................... 86

DOC(Industry CANADA) Notices ........................................................ 86

UL Notice ........................................................................... 87

ENERGY STARCompliance ............................................................. 88

Fujitsu 5

Contents

Declarations of conformity ............................................................. 89

FCCandIC Regulatory Information .................................................... 90

RegulatoryNotesandStatements ........................................................ 90

WirelessLAN, Healthand Authorizationforuse ........................................ 90

Regulatory Information/Disclaimers . . ................................................. 90

Federal Communications Commission and Industry Canada statement: .. . ............... 90

Déclaration d’Industrie Canada . . . . . . ................................................. 91

FCCInterferenceStatement ......................................................... 91

FCC Radio Frequency Exposure statement . . . ......................................... 91

Déclaration de la FCC/d’Industrie Canada sur l’exposition aux radiofréquences ........... 92

Export restrictions ................................................................... 92

Restrictions concernant l’exportation . ................................................. 92

Canadian Notice . ................................................................... 92

Avis pour le Canada . ................................................................ 93

Appendix .............................................................................. 94

Before Using the Optional Wireless LAN . ................................................. 94

WirelessLANDevicesCovered bythisDocument ...................................... 94

Characteristics ofthe WLANDevice .................................................. 94

Wireless LAN Modes Using this Device . . ............................................. 94

Deactivating/Disconnecting the WLANDevice ......................................... 97

Conﬁguring theWireless LAN ............................................................ 97

Connection to the network . . . ........................................................ 97

TroubleshootingtheWLAN ........................................................... 97

Image Backup and Recovery Procedures ................................................. 99

CreatingaBackup ofBootableDiskandRecoveryImage .............................. 100

RECOVERYOUR SYSTEM WHENTHEHARDDRIVEIS STILLACCESSIBLE ............. 101

Usingthe RecoveryandUtilityTools .................................................. 101

Restore the Recovery Image from Hidden Partition . . . .................................. 103

RECOVERYOUR SYSTEM WHENTHEHARDDRIVEIS NOTBOOTABLE ................ 104

Restorethe RecoveryImage for Full HardDrive ....................................... 104

Recovering Your Recovery Image Using Recovery and Utility (for new hard drive or

non-bootablehard drive) ............................................................. 105

InstallingtheSoftwareafterthe RecoveryImage isRestored ............................ 106

Index .................................................................................. 109

6 Fujitsu

Declarations of conformity

DECLARATION OF CONFORMITY

according to FCC Part 15

Responsible Party Name: Fujitsu America, Inc. Address: 1250 E. Arques Avenue

Telephone: Declares that product:

This device complies with Part 15 of the FCC rules. Operations are subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation.

Sunnyvale, CA 94085

(408) 746-6000 Base Model Configuration: STYLISTIC Q616 Complies with Part 15 of the FCC Rules.

Fujitsu 7

Fujitsu Contact Information

Service and Support

You can contact Fujitsu Service and Support in the following ways:

• Toll free phone: 1-800-8Fujitsu (1-800-838-5487)

• Website:

Fujitsu Shopping Online

Please go to "

Maintaining Latest Conﬁguration

To ensure that you always have the most current driver updates related to your system, occasionally access the Fujitsu Software Download Manager (FSDM) utility. The FSDM utility is available from the Fujitsu Support site. FSDM will allow you to view a list of the most current drivers, utilities and applications to determine whether you have the latest versions. If you have a Windows 7 or or Windows 8/8.1 operating system, you will need to go to the Support Site to download the FSDM Utility:

Limited Warranty

Your STYLISTIC Tablet PC is backed by a Fujitsu International Limited Warranty. Check the service kit that came with your Tablet PC for the Limited Warranty period and terms and conditions.

http://solutions.us.fujitsu.com/www/content/support/contact/index.php"

Before you place the call, have the following information ready so that the customer support representative can provide you with the fastest possible solution:

• Product name

• Product conﬁguration number

• Product serial number

• Purchase date

• Conditions under which the problem occurred

• Any error messages that have occurred

• Type of device connected, if any

http://www.shopfujitsu.com/store/ ".

http://support.fujitsupc.com/CS/Portal/support.do?srch=DOWNLOADS".

8 Fujitsu

Notational conventions

Pay particular attention to text marked with this symbol. Failure to observe this warning will endanger your life, will damage the device or lead to loss of data. The warranty will be invalidated if the device becomes defective through failure to observe these warnings.

Indicates important informa

Fujitsu Contact Information

tion which is required to use the device properly.

►



This style

"This style" indicates

Key

This style indicates terms and text that are emphasized or highlighted, e.g.: Do not

indicates an activity that must be performed indicates a result

indicates data entered the command line, e.g. start a program (star

indicates information that is displayed on the screen by a program, e.g.:

Installation is complete.

indicates

• terms and texts used in a software interface, e.g.: Click on Save.

• names of programs or ﬁles, e.g. Windows or setup.exe.

• Cross-references to another section, e.g. "Safety information"

• cross-references to an external source, e.g. a web address: For more information, go to

• names of CDs, DVDs and titles or designations of other materials, e.g.: "CD/DVD Drivers & Utilities" or "Safety/Regulations" manual

indicates a key on the keyboard, e.g:

switch off the device

using the keyboard in a program dialogue or at

your password (Name123)oracommandusedto

t.exe)

"http://solutions.us.fujitsu.com/"

F10

Fujitsu 9

Ports and controls

This chapter presents the individual hardware components of your device. It gives an overview of the indicators and connections of the device. Please familiarize yourself with these items before you start to work with the device.

Front

1 = Touchscreen 2 = Webcam LED 3 = Webcam 4 = Ambient li 5 = Power-on indicator

10 Fujitsu

ght sensor

6 = Mechanical mounting for keyboard

cover / cradle 7 = Docking por 8 = Windows button

Left side

1 2 3

Ports and controls

7 8

1 = Tether eyelet for stylus tether 2 = Combined microphone / Line-in /

Headphone / Line-out / Headset port 3 = Storage card slot 4=SIMcardslot

Right side

1 3 4 9

1 = Security Lock device 2 = Speaker 3 = Shortcut button 4 = Decrease volume button 5 = Increase volume button

5 = Status indicators 6 = Micro-HDMI port 7 = Speaker 8 = DC jack (DC IN)

6 = ON/OFF button 7 = USB port (USB 2.0) 8 = USB port (USB 3.0) 9 = Stylus slot 10 = Eyelet for stylus cord

7 86

Fujitsu 11

Ports and controls

Back

1 = Webcam LED 2 = Webcam 3 = Camera light 4 = Fingerprint sensor

5 = NFC (Near Field Communication)

(device-dependent)

6 = SmartCard reader (device dependent)

12 Fujitsu

Important notes

ImportantnotesNotes

Safety instructions

SafetyinformationInformation,

This chapter contains essential safety information which must be followed when working with your Tablet PC. The other notes provide useful information about your Tablet PC.

Please follow the safety notes provided in the "Safety/Regulations" manual as well as the safety notes given below.

Please pay special attention to the sections in the manual marked with the symbol on the left.

When connecting and disconnecting cables, observe the relevant notes in this operating manual.

Read the information on the ambient conditions in the and the information in the "First-time setup of your device", Page 18 chapter before preparing your Tablet PC for use and switching it on for the ﬁrst time.

When cleaning the device, please observe the relevant notes in the section

"Cleaning the Tablet PC", Page 16.

Pay attention to the additional safety notes for devices with wireless components provided in the "Safety/Regulations" manual.

When handling this device, you come into contact with lead, a chemical which in California is held to be a possible cause of birth defects and other damage to fertility.

Wash your hands after using the device.

Important notes

Technical data", Page 81 chapter

This Tablet P you have ques please conta

Fujitsu 13

C complies with the relevant safety regulations for data processing equipment. If

tions as to whether you can set up the Tablet PC in the intended environment,

ct your sales outlet or our hotline/service desk.

Important notes

Additional safety notes for devices with wireless components

WirelesscomponentsWirelessLANBluetooth,Safetynotes

If a wireless component (Wireless LAN, Bluetooth, 4G) is integrated in your Tablet PC, you must be sure to observe the following safety precautions when using your Tablet PC:

• Switch off the wireless components when you are in an aircraft or driving in a car.

• Switch off the wireless components when you are in a hospital, an operating room or near a medical electronics system. The transmitted radio waves can impair the operation of medical devices.

• Switch off the wireless components, when you let the device get near ﬂammable gases or into hazardous environments (e.g. gas station, paint stores), as the transmitted radio waves can cause an explosion or a ﬁre.

For further information on how to switch the wireless components on and off, refer to section "Switching the wireless components on and off", Page 42.

Protecting the display screen

Depending on your In this event, do Do not place ite

The warranty do

device conﬁguration, where applicable your device is not waterproof.

not pour liquids onto the device and do not wash it with a wet cloth.

ms on the top of the display, or damage may occur.

es not cover a scratched screen.

Energy saving

NotesEnergyPowersaving

If you will not be using your Tablet PC, switch it off. Switch off any connected external devices when they are not in use. If you use the energy-saving functions, the Tablet PC uses less power. If you do this, you will be able to work longer with the Tablet PC before having to recharge the battery.

The energy efﬁciency is increased and environmental pollution is reduced. You save money and help protect the environment.

Energy saving under Windows

► Make use of the available energy-saving functions as described in chapter

"Using the energy saving functions", Page 38.

14 Fujitsu

Traveling with your Tablet PC

MobileoperationNotesTrans portationTabletPC

Please follow the instructions below when traveling with your Tablet PC.

Before you travel

► Back up important data stored on your hard disk.

beforeyoutravelTravel

► Switch off the wireless c

connection, it is also po

omponent for data security reasons. With data trafﬁcviaawireless

ssible for unauthorized third parties to receive data.

Important notes

Information on activat for your wireless compo

ing data encryption is provided in the documentation

nent.

► If you want to use your Tablet PC during a ﬂight, ask the ﬂight attendants to seeit is safe to use it.

When traveling in other countries

► If you are traveling abroad, check that the AC adapter can be operated with the

local AC voltage. If this is not the case, obtain the appropriate AC adapter for your Tablet PC. Do not use any other voltage converter!

► Check whether the local AC voltage and the AC cable are compatible. If this is not

the case, buy an AC cable that suits the local conditions.

► Enquire with the appropriate government ofﬁce of the country you will be traveling in as to

whether you may there operate the wireless component integrated in your Tablet PC.

► Take the necessary travel adapters with you when traveling abroad. Check in the following

table for which travel adapters you will need, or ask your travel organizer.

Power connection Travel destination

United States, Canada, Mexico, parts of Latin America, Japan, Korea, Philippines, Taiwan

Russia and the Commonwealth of Independent States (CIS), much of Europe, parts of Latin America, the Middle East, parts of Africa, Hong Kong, India, much of south-east Asia

United Kingdom, Ireland, Malaya, Singapore, parts of Africa

China, Australia, New Zealand

Fujitsu 15

Important notes

Transporting the Tablet PC

Protect the Tablet PC from severe shocks and extreme temperatures (e.g. direct sunlight in a car).

• Do not transport your Tablet PC while it is turned on.

• Carry your Tablet PC with you while traveling. Do not check it in as baggage.

• Never put your Tablet PC through a metal detector. Have it hand-inspected by security personnel. You can however put your Tablet PC through a properly tuned X-ray machine. To avoid problems, place it close to the entrance of the machine and remove it as soon as possible or have it hand-inspected by security personnel. Security ofﬁcials may require you to turn your Tablet PC on. So make sure you have a charged battery on hand for this.

► Switch the Tablet PC off ► Unplug the AC plug of the AC adapter and all external devices from the power outlets. ► Disconnect the AC ad ► To protect against damaging jolts and bumps, use a suitable Tablet PC

carrying case to transport your Tablet PC.

apter cable and the data cables for all external devices.

Cleaning the Tablet PC

• Use of incorrect c damage to the co material safet

• Never use ammonia, acidic, or alkaline cleaners or organic chemicals such as paint thinner, acetone or kerosene. It may damage surface ﬁnishes and the coating of the LCD screen.

• Never use com

• If your Tablet PC has a Smart Card slot, be very careful to avoid any liquid entering the slot as this can damage the unit.

Further information on cleaning the Tablet PC

The Tablet PC does not ﬂoat.

If the Tablet PC is exposed to water or other liquids with its connections open, liquid can penetrate the Tablet PC and cause a malfunction. Do not continue to use the Tablet PC. Switch it off and contact our hotline / our service desk (see enclosed list of service desks or visit our website at:"http://www.fujitsu.com/us/support/").

leaners can result in optical impairment of the LCD and / or

mputer. Always refer to the cleaner manufacturer’s guidelines and

y data sheets for proper handling and use of the products.

pressed air for cleaning your computer.

16 Fujitsu

Cleaning with disinfectant wipes

There are many ways of disinfecting surfaces. The following disinfectant wipes have been tested successfully with the Tablet PC:

• MG Chemicals Multipurpose Alcohol Wipes (alcohol-based)

• PROSAT® Sterile™ PS-911EB/EtOH Life Sciences Wipes (alcohol-based)

• Clorox® Healthcare Bleach Germicidal Wipes (without alcohol)

Remember, if your Tablet PC is conﬁgured with the Smart Card shell, it does not have a cover to close the port and liquid could enter and damage the device. Take extra precautions when cleaning around the Smart Card reader.

For proper use of disinfectant wipes, please read the manufacturer’s instructions. Before cleaning, please test the disinfectant wipe on a small area of the Tablet

PC. Some medical disinfectant wipes may leave residue on the Tablet PC which is difﬁcult to remove again, or they may dry out quickly. Therefore dispose of the wipes after one single use and do not reuse them.

Important notes

Fujitsu 17

First-time setup of your device

First-time setup of your devic

First-timesetu pGettingstarted

The battery must be charged if you want to operate your device using the battery. When used on the move, the built-in battery provides the device with the necessary power. You

can increase the operating time by using the available energy-saving functions. For instructions on how to connect external devices (e.g. mouse, printer) to your Tablet

PC, please refer to the operating manual for your device.

Unpacking and c

► Unpack all the individual parts. ► Check your d

Please read the chapter "Important notes", Page 13. If your device is equipped with a Windows operating system, the necessary

hardware drivers and supplied software are already pre-installed. Beforeswitchingitonfortheﬁrst time, connect the device to the AC voltage using

the AC adapter, see remain connected during the whole of the installation process.

A system test is performed when your device is ﬁrst switched on. Various messages can appear. The display may remain dark for a short time or may ﬂicker.

Please follow the instructions on the screen. NEVER switch off your device during the ﬁrst-time setup process.

"Connecting the AC adapter", Page 19. The AC adapter must

hecking the device

If you ﬁnd that damage has occurred during transport, please notify your local sales outlet immediately!

PackagingTransport

evice for any visible damage which may have occurred during transportation.

You may nee you need t

18 Fujitsu

d to reuse the packaging in the future, for example if

o ship your device.

Choosealocation

ChoosealocationSetupACadapter

Choose a suitable location for the device before setting it up. In doing so, please follow these instructions:

• Never place the device or the AC adapter on a heat-sensitive surface. The surface could be damaged as a result.

• Never place the device on a soft surface (e.g. carpeting, upholstered furniture, bed). This can result in damage caused by overheating.

• The back of the device heats up during normal operation. Prolonged contact with skin can become unpleasant or even result in burns.

• Place the device on a stable, ﬂat, non-slippery surface. Please note that the rubber feet of the device may mark certain types of delicate surfaces.

• Keep other objects at least 100 mm / 4 inches away from the device and its AC adapter to ensure adequate ventilation.

• Do not expose the device to extreme environmental conditions. Protect the device against dust, humidity and heat.

Connecting the AC adapter

MakingreadytouseACadapter

Observe the safet The supplied AC c

you purchased yo use in the count

y notes in the enclosed "Safety/Regulations" manual.

able conforms to the requirements of the country in which

ur device. Make sure that the AC cable is approved for

ry in which you intend to use it.

First-time setup of your device

► Connect the AC cable (1) to the AC adapter. ► Plug the AC cable (2) into a power outlet. ► Connect the AC adapter cable (3) to the

DC jack (DC IN) of the device.

Fujitsu 19

First-time setup of your device

Switching on the device for the ﬁrst time

Switchingonfortheﬁrsttime

To make it easier to use your device for the ﬁrst time, the operating system is pre-installed on the hard disk.

► Press the ON/OFF button (1) for about one second to switch the device on.

The power-on indicators (2) light up whenever the system is switched on.



► During the installation process, follow the on-screen instructions.

You ca n ﬁnd information and help on the Windows operating system functions online at "http://windows.microsoft.com".

If a Windows 8.1 operating system is installed on your Tablet PC, a tutorial is automatically started when a new user logs on for the ﬁrsttimetoshow you how to use the new functions of Windows 8.1.

20 Fujitsu

First-time setup of your device

Installing Bonus Apps

BonusApps

After you have started your system the ﬁrst time, you will see a Bonus Apps icon on your desktop. ► Click on the icon to see which additional applications are available for you to install.

Applications that are already installed appear in grey, those that are



available for installation appear in blue.

► Select the applications you wish to install by selecting the checkbox adjacent to your selection.

► Click Select All if you would like to install all available applications.

► To conﬁrm your selection, click Install.

Note that in some cases (depending upon which application was selected for installation) after installation completes, the system will prompt you to reboot.

There are also cases in which if multiple applications are selected to install but one of them needs a reboot, the system will reboot and continue installing the rest of the selected applications.

Fujitsu 21

Working with the Tablet PC

Tablet,operationTablet

This chapter describes the basics for operating your Tablet PC. You can ﬁnd instructions on how to connect external devices (e.g. mouse, ﬂash storage) to the Tablet PC in the chapter "Connecting external devices", Page 64.

Please refer to the notes in the chapter "Important notes", Page 13.

Status indicators

StatusindicatorsSymbols

The status indicators (1, 2, 3) provide information about the status of the power supply, the battery and the radio components.

22 Fujitsu

No. Status indicator Description

1 Power-on indicator

• The indicator lights up white: The Tablet PC is switched on.

• The indicator ﬂashes: The Tablet PC is in sleep mode (Save-to-RAM).

• The indicator is not lit up: The Tablet PC is switched off or in Save-to-Disk mode.

2 Battery charging indicator

• The indicator lights up orange: The rechargeable battery is charging.

• The indicator is not lit up: The battery is not charging (the battery is already fully charged or the AC adapter is not connected).

3 Wireless indicator

• The indicator lights up white: The wireless components are switched on while the Tablet PC is switched on.

• The indicator ﬂashes: The wireless components are switched on and Wake On Wireless LAN is enabled while the Tablet PC is in Sleep mode or Save-to-Disk mode, or while the Tablet PC is switched off.

• The indicator is not lit up: The wireless components are switched off.

Working with the Tablet PC

Fujitsu 23

Working with the Tablet PC

Switching the Tablet PC on

Tablet:SwitchingonPower-onPower-onindicatorSuspend/Resumebutton

► Press the ON/OFF button (1) for about one second to switch the device on.

The power



-on indicators (2) light up whenever the system is switched on.

Programing the ON/OFF button

You can program the ON/OFF button:

Operating system Menu

Windows 7

Windows 8.1

If you have assigned a password, you must enter this when requested to do so in order to start the operating system. Detailed information can be found in the chapter"Security functions", Page 57.

24 Fujitsu

Start - (Settings) - Control Panel - System and Security - Power Options

Windows 8.1 Desktop - Control Panel - Hardware and Sound - Power Options

Working with the Tablet PC

Switching the Tablet PC off

Back up your data and close all applications before you switch off your device. Otherwise data might be lost.

► Shut down the operating system correctly.

Switchingoffthe

► If the Tablet PC does not switch itself off automatically, press the ON/OFF

button for approx. ﬁve seconds.

Handwriting recognition

For detailed information on handwriting recognition, see the documentation for your operating system. At present, handwriting recognition under Windows 7 or Window 8.1 supports the following languages: English, German, French, Italian, Japanese, Korean, Chinese (traditional and simpliﬁed), Dutch,

Portuguese, Spanish, Brazilian, Norwegian (Bokmål and Nynorsk), Swedish, Finnish, Danish, Polish, Rumanian, Serbian (Cyrillic and Latin script), Catalan, Russian, Czech and Croatian.

Under Windows 8.1 you can set the required language under Control Panel – Time, Language and Region – Language.

Fujitsu 25

Working with the Tablet PC

Touchscreen

Touchsc reenNotes

High-quality LCD screens (TFT) are installed in Fujitsu Tablet PCs. For technical reasons, these screens are manufactured for a speciﬁc resolution. An optimal, clear picture can only be ensured in the resolution intended for the particular screen. A screen resolution which differs from the speciﬁcation can result in an unclear picture.

The screen resolution of your Tablet PC’s touchscreen is optimally set at the factory. Current production technology cannot guarantee an absolutely fault-free screen display. A few

isolated constantly lit or unlit pixels (picture elements) may be present. The maximum permitted number of such faulty pixels is speciﬁed in the international standard ISO 9241-307 (Class 2).

Example:

A monitor with a resolution of 1,280 x 800 has 1,280 x 800 = 1,024,000 pixels. Each pixel consists of three subpixels (red, green and blue), so there are almost 3 million subpixels in total. According to ISO 9241-307 (class 2), a maximum of 2 light and 2 dark pixels and in addition 5 light or 10 dark subpixels or an equivalent mix (1 light subpixel counts as 2 dark subpixels) are allowed to be defective.

Pixel

Subpixel

Cluster A cluster contain

Background lighting

LCD screens are operated with background lighting. The luminosity of the background lighting can decrease over the period of use of the Tablet PC. However, you can adjust the brightness of your monitor yourself.

A pixel consists of 3 subpixels, normally red, green and blue. A pixel is the smallest element that can be generated by complete functionality of the display.

A subpixel is a separately addressable internal structure within a pixel that enhances the pixel function.

s two or more defective pixels or

subpixels in a 5 x

5 pixel block.

Ambient light sensor

If your Tablet PC was shipped with the Windows operating system, the screen brightness is regulated by the ambient light sensor and is dependent on the particular light conditions. This results in optimum readability and longer battery life at the same time.

If your Tablet PC was shipped with Windows 8.1, the adaptive brightness setting is deactivated. To change the ambient light sensor settings, select Control Panel - System and Security - Power Options - Change plan settings - Change advanced power settings - Display - Activate adaptive brightness setting..

Select On to activate the adaptive brightness setting with the help of the ambient light sensor.

Synchronizing the display on the touchscreen and an external monitor

In Windows 7, you can switch between touchscreen and external monitor, if you open Control Panel - Windows Mobility Center,sectionExternal Display.

In Windows 8.1 wipe your ﬁnger over the screen from the right-hand edge. The setting Charms - Devices - Second monitor opens. Select the desired output type.

You can also use the Fujitsu Display Manager in the Windows Mobility Center to set the output type.

26 Fujitsu

Working with the Tablet PC

Select display orientation (portrait or landscape format)

LandscapeformatPortraitformatDisplayorientation

You can choose to use either portrait or landscape format for the display.

Windows 7

You can change these settings in the Fujitsu menu or under Start -(Settings -) Control Panel - Hardware and Sound - Display - Settings.

Windows 8.1

You can change these settings under Windows 8.1 Desktop - Control Panel Hardware and Sound - Windows Mobility Center / Rotate screen.

In the Fujitsu Tablet Controls settings, proﬁles are saved for operation with different screen orientations. These proﬁles have preset standard conﬁgurations that can be modiﬁed as desired.

These settings do not just affect the monitor settings on the Tablet PC, but also on external monitors that are connected.

Using ﬁngers

You can execute certain commands by using your ﬁnger tip on the touchscreen of your device.

Alternatively, everything which you can select or activate using your ﬁnger tip can also be selected or activated using the stylus.

Calibrate the Dual Digitizer for ﬁnger-based operation o

Operating system Menu

Windows 7 / Windows 8.1 Desktop

Fujitsu 27

f the device.

Before the ﬁrst ﬁnger-based operation, you must calibrate your Tablet PC via the operating system, so that it recognizes your ﬁngertips as accurately as possible.

As soon as you notice that the accuracy is becoming worse, you must recalibrate the device.

Please note: There are separate calibration programs available for calibrating the stylus and for calibrating ﬁnger-based operation. Do not use the calibration tool for the stylus to calibrate ﬁnger-based operation.

To calibrate, run the Hardware and Sound / Tablet PC Settings function in the Control Panel. You need to calibrate both portrait and landscape formats.

Working with the Tablet PC

Actions with one ﬁnger (Windows 8.1 Modern)

Action Description

Wipe your ﬁnger over the screen from the right-hand edge.

► Open Charms with system commands

(equivalent to pressing the Windows button +Cbutton on a keyboard).

► Working with the mouse: Position the mouse

pointer at the bottom right-hand edge of the screen.

Wipe your ﬁnger over the screen from the left-hand edge.

Wipe your ﬁnger over the screen from the top or bottom edge.

► Switch between the most recently used

applications (equivalent to pressing the Windows button + keyboard).

► Working with the mouse: Position the mouse

pointer at the bottom left-hand edge of the screen.

► Open the App commands (equivalent to

pressing the Windows button +Zbuttonona keyboard). Wipe from the top to the bottom of the screen to dock or close the current App.

► Working

Apptod

with the mouse: Right-click on the

isplay the App commands.

Ctrl

+ Space on a

28 Fujitsu

+ 83 hidden pages