Fujitsu America, Inc.has made every effort to ensure the accuracy and completeness of this document. Because ongoing development efforts are made to
continually improve the capabilities of our products, however, the data contained herein represents Fujitsu design objectives and is provided for comparative
purposes; actual results may vary based on a variety of factors. This product data does not constitute a warranty. Specifications are subject to change without
knowledge.
Fujitsu and the Fujitsu logo are registered trademarks of Fujitsu Limited; STYLISTIC is a registered trademark of Fujitsu America, Incorporated.
Microsoft and Windows are registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.
The SD Logo is registered with the U.S. Patent and Trademark Office and with other trademark offices around the world by SD-3C, LLC.
Intel and Intel Core are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries.
OmniPass is a trademark of Softex, Inc.
Google is a trademark or registered trademark of Google Incorporated.
Atheros is a registered trademark of Atheros Communications, Inc.
Norton Internet Security is a trademark of Symantec Corporation in the United States and other countries.
AirPrime is a trademark of Sierra Wireless Inc.
Roxio is a trademark of Roxio, a division of Sonic Solutions.
Gobi3000 is a trademark of Qualcomm Inc.
Nuance and XT9 are either registered trademarks or trademarks of Nuance Communications, Incorporated.
Adobe and Adobe Reader are registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries.
Bluetooth and the Bluetooth logo are registered trademarks of Bluetooth SIG, Inc.
Realtek is a trademark of Realtek Semiconductor Corp.
Wi-Fi is a trademark of the Wireless Ethernet Compatibility Alliance (WECA).
All other products are trademarks or registered trademarks of their respective companies. All other trademarks mentioned herein are the property of their
respective owners
.
Copyright 2012 Fujitsu America, Inc. All rights reserved. No part of this publication may be copied, reproduced, or translated, without the prior written
consent of Fujitsu America, Incorporated. No part of this publication may be stored or transmitted in any electronic form without the prior consent of Fujitsu
America, Inc. B6FJ-8761-01ENZ0-00
USER GUIDEFOR WIRELESS BROADBAND CONNECTION
IFYOUHAVETHEOPTIONAL WIRELESS WAN (WWAN) DEVICEINSTALLEDINYOUR HYBRIDTABLET, THE WWAN USER’S GUIDEISLOCATEDAT:
Declares that product:Base Model Configuration: STYLISTIC Q702 Hybrid Tablet
Complies with Part 15 of the FCC Rules.
This device complies with Part 15 of the FCC rules. Operations are subject to the following two conditions:
(1) This device may not cause harmful interference, (2) This device must accept any interference received,
including interference that may cause undesired operation.
IMPORTANT SAFETY INSTRUCTIONS
+
AC adapter output polarity:
This unit requires an AC adapter to operate. Use only UL Listed I.T.E. Adapters with an output rating of 19 VDC, with a current of 3.16A (60 W).
When using your Hybrid Tablet, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including
the following:
CAUTION: HOT SURFACE: THEBOTTOMOFTHISCOMPUTERCANBECOMEHOTWHENUSEDFORLONGPERIODSOFTIME. WHENUSINGTHIS
The STYLISTIC® Q702 Hybrid Tablet is a high-performance pen-based computer that has been designed to support
Microsoft® Windows® 7 Professional edition.
This manual explains how to operate your Hybrid Tablet hardware and built-in system software.
The STYLISTIC Q702 Hybrid Tablet is a completely self-contained unit with a 11.6” HD IPS display with 160 degree
vertical and horizontal viewing angles. It has a powerful interface that enables it to support a variety of optional
features.
Conventions Used in the Guide
Pages with additional information about a specific topic are cross-referenced within the text.
On screen buttons or menu items appear in bold. Example: Click OK to restart your Hybrid Tablet.
THEWARNINGICONHIGHLIGHTSINFORMATIONTHATCANBEHAZARDOUSTOEITHERYOU, YOUR HYBRID TABLET, ORYOURFILES. PLEASEREADALL
WARNINGINFORMATIONCAREFULLY.
Fujitsu Contact Information
Service and Support
You can contact Fujitsu Service and Support in the following ways:
• Toll free: 1-800-8FUJITSU (1-800-838-5487)
• Website:
U.S.A. - us.fujitsu.com/solutions
Canada - www.fujitsu.ca
Before you place the call, you should have the following information ready so that the customer support
representative can provide you with the fastest possible solution:
• Product name
• Product configuration number
• Product serial number
• Purchase date
• Conditions under which the problem occurred
• Any error messages that have occurred
• Type of device connected, if any
Fujitsu Shopping Online
You can go directly to the online by going to the website at: www.shopfujitsu.com.
11
- About This Guide
Maintaining Latest Configuration
To ensure that you always have the most current driver updates related to your system, you should occasionally access
the Fujitsu Software Download Manager (FSDM) utility. The FSDM utility is available to allow you to download the
latest drivers, utilities, and applications from the Fujitsu Support site. If you have a Windows 7 operating system, you
will need to go to the Support Site (http://support.fujitsupc.com/CS/Portal/support.do?srch=DOWNLOADS).
Limited Warranty
Your Hybrid Tablet is backed by a Fujitsu International Limited Warranty. Check the service kit that came with your
tablet for the Limited Warranty period and terms and conditions.
12
- About This Guide
Chapter 1
Getting to Know Your Hybrid Tablet
Overview
The STYLISTIC® Q702 Hybrid Tablet
is a high-performance pen-based
computer that has been designed
to support Microsoft® Windows® 7
Professional edition.
The Q702 Hybrid Tablet is called a
“hybrid” because when used with
the optional keyboard docking
station, it has the looks and
functionality of a traditional
laptop.
This chapter provides an overview
of the STYLISTIC Q702 Hybrid
Tablet and its many features.
Figure 1. STYLISTIC Q702 Hybrid Tablet
13
Locating the Connectors and Controls
Front Web Camera
Display
Speaker
Web Cam Access LED
Windows Button
Speaker
Docking Cradle Connector
Features and controls that you use to operate your Hybrid Tablet are outlined below and illustrated in Figures 2 and
3. Details on using these features and controls are provided later in this manual.
Figure 2. STYLISTIC Q702 Hybrid Tablet Features (Bottom, Right View)
Front Features
Front Web Camera
The front-facing HD (1280x720 pixel) web camera allows you to take pictures of yourself to send over the internet.
For information on using the microphone and web cam, see the documentation associated with the YouCam
application.
Web Cam Access LED
The web cam access LED indicates when the web camera is in use.
14
- Locating the Connectors and Controls
Display
The 11.6” HD IPS display offers 160 degree vertical and horizontal viewing angles.
Speakers
The speakers allow you to hear stereo sound from the system.
Windows Button
Pressing the Windows button gives you quick access to the Start menu.
Docking Cradle Connector
Allows you to connect the optional STYLISTIC Keyboard Docking Station.
15
- Locating the Connectors and Controls
Figure 3. STYLISTIC Q702 Hybrid Tablet Features (Back View)
Rear Web Camera
Fingerprint Sensor
Back Features
Rear Web Camera
The FHD (1920x1080 pixel) rear web camera allows you to take pictures of objects in front of you for sharing over the
internet. For information on using the camera, see the documentation associated with the YouCam application.
Fingerprint Sensor
The fingerprint sensor allows you to start your system by swiping your finger over the sensor. See “Introducing the
Fingerprint Sensor Device” on page 99.
16
- Locating the Connectors and Controls
Air VentsUSB 3.0 Connector
SD Card Slot
DC In Jack
Figure 4. STYLISTIC Q702 Hybrid Tablet Features (Left View)
Left features
Air Vents
The air vents are used to cool the system to prevent overheating.
Allows you to connect Universal Serial Bus-compliant devices (compliant with USB Standard Revision 3.0) to the
Hybrid Tablet.
DC In Jack
Allows you to connect the AC adapter or auto adapter.
SD Card Slot
The Secure Digital (SD) card slot allows y
ou to insert a flash memory card for data storage. Flash memory cards allow
you to transfer data to and from a variety of different digital devices. See “Secure Digital Cards” on page 44.
17
- Locating the Connectors and Controls
Figure 5. STYLISTIC Q702 Hybrid Tablet Features (Right View)
USB 2.0 Connector
HDMI Connector
Power/Suspend/Resume Switch
Volume Down Button
Volume Up Button
Rotate Display Button
Wireless Device Switch
Anti-Theft Lock Slot
Headphone/Line Out Jack
Microphone/ Line In Jack
Pen Tether
Attachment Point
Right Features
USB 2.0 Connector
Allows you to connect Universal Serial Bus-compliant devices (compliant with USB Standard Revision 2.0) to the
Hybrid Tablet. Two additional USB 2.0 ports are located on the optional Keyboard Docking Station.
Power/Suspend/Resume Switch
Allows you to turn on, off, sleep, resume, hibernate or wake the Hybrid Tablet in order to optimize battery life. See
“Starting Your STYLISTIC Hybrid Tablet” on page 37.
Volume Up / Volume Down Buttons
The Volume Up and Volume Down buttons allow you to control the volume of the tablet.
Anti-theft Lock Slot
The anti-theft lock slot allows you to attach an optional physical lock down device.
Pen Tether Attachment Point
The pen tether attachment point is used to connect your pen -- or stylus -- to the system to prevent its loss.
18
- Locating the Connectors and Controls
Headphone/Line Out Jack
The headphone jack allows you to connect headphones. See “Headphone Jack” on page 81.
Microphone/Line In Jack
The microphone jack allows you to connect an external stereo microphone. See “Microphone Jack” on page 81.
Wireless Device On/Off switch
The wireless device on/off switch is used to turn the optional WLAN, WWAN, and Bluetooth devices on and off.
Switching the device off when not in use will help to extend battery life.
Rotate Display Button
The Rotate Display button allow you to change the orientation of the display from horizontal to vertical.
HDMI Connector
The HDMI port is used to connect compatible digital devices with your computer (such as a high-definition television
or AV receiver).
19
- Locating the Connectors and Controls
Status Indicator Panel
PowerBattery
Battery
SSD Access
harge
Level
Icons appear under each of the system status LEDs in the status display indicating the status of the solid state drive, system power, battery
charge and battery level status. The location of icons in the Status display is shown in Figure 6.
Table 1 explains how the LEDs associated with the individual icons are displayed, and describes what the variations of the displays indicate.
(If an icon is not displayed, it indicates that the related system function is off or inactive.
Figure 6. Status Display Icons
20
- Status Indicator Panel
Table 1 . Status Display Conditions
In the following table, a “blinking” LED flashes at the rate of once per second; an LED that is “blinking, slow” flashes at the rate of one second on, five
seconds off.
IconLED StateRemarks
Green, solidThe indicator lights up green: The hard disk drive is being accessed.
Hard Drive Access
Battery Level
Charging Indicator
Power
Green, solidThe battery is fully charged.
Orange, solid
The battery is partially charged.
Red, solidThe battery is nearly discharged.
OffThe Tablet is switched off or in Save-to-Disk mode.
Green, solid
Orange, solid
Red, blinking
The AC Adapter is connected.
The battery is being charged.
Battery charging error
OffAC Adapter is disconnected.
Blue, solid, The system is turned on.
Blue, blinking
Off
The notebook is in sleep mode (Save-to-RAM).
The notebook is switched off or in Save-to-Disk mode.
21
- Status Indicator Panel
Figure 7. Hybrid Tablet Display Panel
Display Panel
Your STYLISTIC Q702 Hybrid Tablet contains an LCD display panel that is backlit for easier viewing in bright
environments. The slate design of your Hybrid Tablet allows you to easily hold the unit and rotate it 90o, 180o, or 270o
in either direction. This display is used as a tablet, much as you would a pad of paper. The tablet can also be used in
conjunction with the optional keypad dock to create a traditional notebook form.
Adjusting Display Panel Brightness
To adjust brightness with the power management utility:
Click Start -> Control Panel. In View by:, select one of the icon views. Select Display, then click Adjust brightness in
the left pane. Under Select a power plan, select the plan settings you want to use. Drag Screen brightness: bar (at
the bottom of the window) to the left or right, depending on your preference.
22
- Display Panel
Holding the Hybrid Tablet
The STYLISTIC Q702 can be held in any of three orientations, depending upon how you would like to use it. There is
primary landscape orientation (secondary landscape orientation is non-functional) and primary and secondary
portrait orientations. (The orientation nomenclatures reflect those used in the button utility). When you rotate the
system using the Rotation button, the order in which it rotates is illustrated below.
Primary Landscape Orientation
Secondary Portrait
Orientation
23
- Display Panel
Secondary Landscape Orientation
(Non-functional)
Primary Portrait
Orientation
Active Digitizer/Touchscreen
Active Digitizer Display
The integrated active digitizer allows you to use the
included stylus (also called a “pen”) as a pointing
device. (For detailed information about caring
for your stylus, go to “Caring for the Pen” on
page 30.)
You can use the stylus to click, double-click, drag
items and icons, write text, or to draw like a pen or
pencil in applications that support this behavior,
such as drawing or painting programs. See the
documentation that came with your application for
details.
To left-click, touch the object you wish to select and then lift
the stylus tip immediately.
Figure 9. Clicking on the Active Digitizer Display
Figure 10. Right-clicking Active Digitizer
Right-Clicking on Active Digitizer
Right-click can be accomplished by holding the front
of the toggle button down while tapping on the
screen. To change the settings for the right-click
feature, go to Start -> Control Panel -> Pen and Touch.
In the Pen Options tab, select “Press and Hold” then
click the [Settings] button.
25
- Active Digitizer/Touchscreen
Double-Clicking
To double-click, touch the item twice, and then immediately
remove the stylus tip.
Dragging
Dragging means moving an item with the stylus by tou ching
the screen, moving and then lifting the stylus. To drag, touch
the Active Digitizer Display with your stylus on the item you
wish to move. While continuing to touch the screen with the
stylus, drag the item to its new location by moving the stylus
across the screen, and then lifting the stylus to release it.
Figure 11. Double-clicking the Display
26
- Active Digitizer/Touchscreen
Figure 12. Dragging on the Display
Calibrating the Display
In order to ensure accurate tracking between the stylus and cursor, you must run the Calibration Utility before you use
the system for the first time, or after you change the display resolution.
To run the calibration utility:
1Go to Start -> Control Panel.
2Double-click the Tablet Settings icon and select the Display tab
3Click the [Calibrate] button, then select whether you want to calibrate pen input or touch input.
4Adjust the display of your Hybrid Tablet to a comfortable angle and find the (+) symbol in the upper-left corner
5Using the stylus or your finger (depending upon which type of input you are calibrating), firmly touch the screen
directly on the (+) symbol. Lift the stylus from the screen and the target will move to a different location on the
screen.
6Repeat step 5 until you have selected all of the (+) symbols.
7Once you have selected all the symbols, press the [OK] button.
8Touch the stylus to various points on the screen to verify that the screen is correctly calibrated. If you are not
satisfied with the screen’s calibration, press the [Calibrate]) button to begin again.
27
- Active Digitizer/Touchscreen
Using the Capacitive Touchscreen
Certain configurations of this Hybrid Tablet have an optional dual digitizer that allows you to use either the stylus or
your finger(s) as a pointing device. This type of display also allows you to use “gestures” to perform such actions as
scroll, zoom, and rotate.
To perform a right-click action using two fingers, press the first finger at the location you want to perform a right-click,
then quickly tap and release the second finger on the screen.
Gesture Mode
To initiate gesture mode, two fingers must touch the screen within 200 ms of each other. If the second finger touches
the screen after 200 ms has elapsed, the second finger is ignored. If more than two fingers touch the screen in that
time, Advanced Gesture Mode is activated instead. When Gesture Mode is activated, no cursor movement is sent to
the system.
When both fingers are removed, Gesture mode ends. When a third finger is added, gesture mode ends and Advanced
gesture mode is activated. Note that if a gesture can’t be recognized, no action is taken. In that case, remove both
fingers from the screen and try again.
Scrolling Gesture
To scroll through long documents or on a web page, place both fingers on the screen (one finger quickly followed by
the second). If at least one finger has moved at least 3 mm, a scroll is considered. If both fingers are moving in the
same direction and parallel (given a tolerance of 5 mm), Scroll Mode is activated. If one finger is stationary, it is not
considered a scroll. If either finger is lifted, Scroll Mode is canceled.
28
- Active Digitizer/Touchscreen
Zoom Gesture
The zoom gesture is especially helpful when viewing pictures. To zoom in, place two fingers on the item you want to
enlarge (one finger quickly followed by the second), then spread them away from each other.
If at least one finger has moved at least 10 mm, a zoom event is considered. If the distance between the fingers has
changed by at least 10 mm, and both fingers have stayed on approximately the same line, Zoom Mode is entered. If
either finger strays more than 10 mm from the "zoom line" created when the fingers first made contact, the zoom is
canceled.
To zoom out, place two fingers on the item you want to reduce (one finger quickly followed by the second), then move
them towards each other.
Rotate Gesture
To change the orientation of an object on the screen, place two fingers on the image you want to rotate (one finger
quickly followed by the second), then move them in opposite directions (as if you were turning a knob). The direction
the item turns is dependant upon the direction you move your fingers.
If at least one finger moves at least 12 mm, a rotate is considered. If one finger is stationary (moving less than 5 mm
in any direction), and the other is moving, a rotate is considered. If the fingers begin moving in the same direction,
the rotation is canceled. If the distance between the fingers changes by more than 10 mm, the rotation is canceled.
Accessing the OnScreen TouchPad
Your tablet has a handy on-screen touchpad that offers a variety of helpful functions. Features of the OnScreen
TouchPad include:
• Virtual Mouse Emulator: The Virtual Mouse Emulator works in much the same manner as a hardware mouse.
With the virtual mouse, you can scroll, drag, and click, as well as perform [Ctl]+[Click] and [Shift]+[Click]
actions.
• Application Launch/Key Macro: This window provides access to five pages, each of which can contain up to
twenty buttons. Each button can be programmed to open an application, a folder, document, or key (such as
[Esc], [ Alt+X] and [Page Up]).
• Digital Keyboard: This window provides a soft keyboard for use in mathematical procedures. It works in much
the same way as the Windows standard calculator.
29
- Active Digitizer/Touchscreen
To access the OnScreen TouchPad, go to the Start Menu > All Programs > Fujitsu OnScreen TouchPad. To learn more
about the utility, click on Usage and Help.
Using the Nuance SoftKeyboard
For general information about using the Nuance SoftKeyboard, please refer to your Getting Started Guide that came
with the system. If you have questions about the Nuance SoftKeyboard, or you would like to learn more, click the Help
icon (it looks like a question mark) in the Nuance taskbar.
There are a few changes you can make to your pen settings in order to make it more suitable to your needs (such as
changing the pressure sensitivity). To do so, go to Start > Control Panel and select one of the icon views from the “View
by:” dropdown. Click on the Pen and Touch icon to open the window from which you can change a variety of pen
settings.
30
- Active Digitizer/Touchscreen
Loading...
+ 86 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.