Fujitsu Computer Systems Corporation has made every effort
to ensure the accuracy and completeness of this document;
however, as ongoing development efforts are continually
improving the capabilities of our products, we cannot guarantee the accuracy of the contents of this document. We
disclaim liability for errors, omissions, or future changes.
Fujitsu, the Fujitsu logo, and LifeBook are registered trademarks of Fujitsu Limited.
The following are registered trademarks of IBM
Corporation: IBM, IBM PC AT, IBM PS/2.
The ExpressCard word mark and logo are owned by the
Personal Computer Memory Card International Association
(PCMCIA) and any use of such marks by Fujitsu Computer
Systems Corporation is under license.
MS, MS-DOS, and Windows are either registered trademarks
or trademarks of Microsoft Corporation in the United States
and/or other countries.
PCMCIA is a trademark of the Personal Computer Memory
Card International Association.
Intel and Pentium are registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries.
The Bluetooth trademark is owned by Bluetooth SIG, Inc.,
USA.
Adobe, Acrobat, and Acrobat Reader are either registered trademarks or trademarks of Adobe Systems Inc. in the United States
and/or other countries.
Dolby Headphone is manufactured under license from Dolby
Laboratories. Dolby, Pro Logic, and the double-D symbol are
trademarks of Dolby Laboratories.
Quicken® is a registered trademark of Intuit, Inc., or
one of its subsidiaries, in the United States and other countries.
Norton and Internet Security are trademarks or registered
trademarks of Symantec Corporation in the United States and
other countries.
PowerDVD is a trademark of CyberLink Corp.
This product incorporates copyright protection technology that
is protected by method claims of certain U.S. patents and other
intellectual property rights owned by Macrovision Corporation
and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is
intended for home and other limited viewing uses only unless
otherwise authorized by Macrovision Corporation. Reverse
engineering or disassembly is prohibited.
All other trademarks mentioned herein are the property of their
respective owners
Handling the cord on this product will expose you
to lead, a chemical known to the State of
California to cause birth defects or other
reproductive harm.
Wash hands after handling.
B6FH-8881-01EN-00
DECLARATION OF CONFORMITY
according to FCC Part 15
Responsible Party Name:Fujitsu Computer Systems Corporation
Address: 1250 E. Arques Avenue, M/S 122
Sunnyvale, CA 94085
Telephone:(408) 746-6000
Declares that product:LifeBook S7110 notebook
Complies with Part 15 of the FCC Rules.
This device complies with Part 15 of the FCC rules. Operations are subject to the following two conditions:
(1) This device must not be allowed to cause harmful interference, (2) This device must accept any
interference received, including interference that may cause undesired operation.
S7110.book Page 4 Monday, March 20, 2006 1:56 PM
LifeBook S7100 Notebook
UL Notice
This unit requires an AC adapter to operate. Use only UL
Listed Class 2 Adapters with an output rating of 19 V
DC, with a current of 4.22 A.
AC Adapter output polarity:
+
■
When using your notebook equipment, basic safety
precautions should always be followed to reduce the
risk of fire, electric shock and injury to persons,
including the following:
■
Do not use this product near water for example,
near a bathtub, washbowl, kitchen sink or laundry
tub, in a wet basement or near a swimming pool.
■
Avoid using the modem during an electrical storm.
There may be a remote risk of electric shock from
lightning.
■
Do not use the modem to report a gas leak in the
vicinity of the leak.
■
Use only the power cord and batteries indicated in
this manual. Do not dispose of batteries in a fire.
They may explode. Check with local codes for
possible special disposal instructions.
■
To reduce the risk of fire, use only No. 26 AWG or
larger UL Listed or CSA Certified Telecommunication
Line Cord
■
For TV Tuner Models: To protect yourself from overvoltages on the Cable Distribution System, make sure
that the outer shield of the coaxial cable is connected
to earth (grounded) at the building premises as close
to the point of cable entrance as practical.
SAVE THESE INSTRUCTIONS
For Authorized Repair Technicians Only
■
For continued protection against risk of
fire, replace only with the same type and
rating fuse.
■
Danger of explosion if Lithium (clock)
battery is incorrectly replaced. Replace
only with the same or equivalent type
recommended by the manufacturer. Dispose of used batteries according to the
manufacturer’s instructi
on.
System Disposal
LAMP(S) INSIDE THIS PRODUCT
CONTAIN MERCURY AND MUST
Hg
BE RECYCLED OR DISPOSED OF
ACCORDING TO LOCAL, STATE, OR
FEDERAL LAWS.
The LifeBook S7100 notebook from Fujitsu is a powerful
computer. It is powered by a fast Intel® Core™ Duo
processor, has a built-in TFT color display, a number of
possible configurations, and brings the computing
power of desktop personal computers (PCs) to a
portable environment.
This manual explains how to operate your LifeBook
notebook’s hardware and built-in system software. Your
computer comes with Microsoft Windows® XP Home or
Windows XP Professional pre-installed.
The LifeBook S7100 notebook is a completely selfcontained unit with an active-matrix (TFT) color LCD
display. It has a powerful interface that enables it to
support a variety of optional features.
Conventions Used in the Guide
Keyboard keys appear in brackets.
Example: [Fn], [F1], [ESC], [ENTER] and [CTRL].
Pages with additional information about a specific topic
are cross-referenced within the text.
For example: (See page xx.)
On screen buttons or menu items appear in bold
Example: Click OK to restart your LifeBook notebook.
DOS commands you enter appear in Courier type.
Example: Shutdown the computer?
The information icon highlights
information that will enhance your
understanding of the subject material.
FUJITSU CONTACT INFORMATION
Service and Support
You can contact Fujitsu Service and Support in the
following ways:
Before you place the call, you should have the following
information ready so that the customer support
representative can provide you with the fastest possible
solution:
■
Product name
■
Product configuration number
■
Product serial number
■
Purchase date
■
Conditions under which the problem occurred
■
Any error messages that have occurred
■
Type of device connected, if any
Fujitsu Online
You can go directly to the online Fujitsu Product catalog
for your LifeBook notebook by going to:
www.shopfujitsu.com.
You can also reach Fujitsu Service and Support online by
clicking on the Service and Support Website URL link,
located in the Fujitsu Web links -> Service and Support
Software folder of the Windows Start menu.
You must have an active internet
connection to use the online URL links.
The caution icon highlights information
that is important to the safe operation of
your computer, or to the integrity of your
files. Please read all caution information.
The warning icon highlights information
that can be hazardous to either you, your
LifeBook notebook, or your files. Please
read all warning information carefully.
LIMITED WARRANTY
Your LifeBook notebook is backed by a Fujitsu International Limited Warranty. Check the service kit that came
with your notebook for the Limited Warranty period
and terms and conditions.
1
S7110.book Page 2 Monday, March 20, 2006 1:56 PM
LifeBook S7100 Notebook
2
S7110.book Page 3 Monday, March 20, 2006 1:56 PM
Getting to Know
Your LifeBook Notebook
2
3
S7110.book Page 4 Monday, March 20, 2006 1:56 PM
LifeBook S7100 Notebook
4
S7110.book Page 5 Monday, March 20, 2006 1:56 PM
Getting to Know Your LifeBook
Figure 2-1. Fujitsu LifeBook S7100 notebook
Overview
This section describes the components of your Fujitsu
LifeBook S7100 notebook. We strongly recommend that
you read it before using your notebook – even if you are
already familiar with notebook computers.
UNPACKING
When you receive your LifeBook notebook, unpack it
carefully, and compare the parts you have received with
the items listed below.
For a pre-configured model you should have:
■
LifeBook S7100 notebook (Figure 2-1)
■
AC adapter with AC power cord (Figure 2-2)
■
Lithium ion Battery, pre-installed
■
Wei g ht S ave r
■
Phone/Modem (RJ-11) telephone cable
■
Driver and Application Restore (DAR) Disc
■
Restore DVD
■
Mini S-Video Cable Adapter (Figure 2-3)
■
Trusted Platform Module (TPM) Driver and
Application CD
■
Getting Started Guide
■
User’s Guide (this document)
■
International Limited Warranty Brochure
■
Microsoft®-associated product materials
Depending on your system configuration, one of the
following devices will be pre-installed in the Flexible
Bay:
■
Wei g ht S ave r
■
Modular Dual-Layer Multi-Format DVD Writer
■
Modular DVD/CD-RW combo drive
■
Modular DVD-ROM drive
Depending on your system configuration, the following
optional items may be included with your system:
■
Modular bay battery
■
External USB floppy disk drive
Depending on your configuration, you may receive the
following application CDs:
■
CD-RW Application CD
■
Bluetooth Driver and Utility CD
■
Fingerprint Sensor Software CD
Once you have checked and confirmed that your LifeBook system is complete, read through the following
pages to learn about all of your notebook’s components.
Figure 2-2 AC Adapter
Figure 2-3 Mini S-Video Cable Adapter
5
S7110.book Page 6 Monday, March 20, 2006 1:56 PM
LifeBook S7100 Notebook
Quick Point Cursor Control Button (optional)
Air Vents
Bluetooth On/Off Switch
Wireless LAN/
Air Vents
Memory Stick/SD/xD Card Slot
Display Panel Latch
Display Panel
Status
Indicator Panel
LifeBook Security/
Application Panel
Power/
Suspend/
Resume Button
Stereo Speakers
Keyboard
Tou ch pa d
Pointing Device
Figure 2-4. LifeBook notebook with display open
Locating the Controls
and Connectors
TOP AND FRONT COMPONENTS
The following is a brief description of your LifeBook
notebook’s top and front components.
Display Panel
The display panel is a color LCD panel with back
lighting for the display of text and graphics.
Status Indicator Panel
The Status Indicator Panel displays symbols that correspond with a specific component of your LifeBook notebook. (See Status Indicator Panel on page 12 for more
information)
LifeBook Security/Application Panel
The LifeBook Security/Application Panel provides
hardware security and one-touch application launch
capability. (See LifeBook Security/Application Panel on
page 21 for more information)
Power/Suspend/Resume Button
The Power/Suspend/Resume button allows you to
suspend notebook activity without powering off, resume
your LifeBook notebook from standby mode, and power
on your notebook when it has been shut down from
Windows. (See Power/Suspend/Resume Button on page 32
for more information)
Stereo Speakers
The built-in dual speakers allow for stereo sound.
Keyboard
A full-size keyboard with dedicated Windows keys. (See
Keyboard on page 14 for more information)
Touchpad Pointing Device/Scroll Button
The Touchpad pointing device is a mouse-like cursor
control with five buttons (two left, two right, and scroll
button). (See Touchpad Pointing Device on page 16 for more information) Certain configurations of this system
have an optional fingerprint sensor located in place of
the scroll button. (See Fingerprint Sensor Device on page 111 for more information)
Display Panel Latch
The display panel latch locks and releases the display
panel.
Memory Stick/SD/xD-Picture Card Slot
The Memory Stick/Secure Digital/xD-Picture card slot
allows you to insert a flash memory card for data
storage. This architecture allows you to transfer data
from a variety of different digital devices. (See Memory
Stick/Secure Digital/xD Card Slot on page 47 for more
information)
6
S7110.book Page 7 Monday, March 20, 2006 1:56 PM
Air Vents
The air vents are used to cool the system to prevent overheating.
To protect your notebook from damage
and to optimize system performance, be
sure to keep all air all vents unobstructed,
clean, and clear of debris. This may
require periodic cleaning, depending upon
the environment in which the system is
used.
Do not operate the notebook in areas
where the air vents can be obstructed,
such as in tight enclosures or on soft
surfaces like a bed or cushion.
Wireless LAN/Bluetooth On/Off Switch
The wireless LAN/Bluetooth on/off switch is used to
power on and off the optional WLAN/Bluetooth device.
Switching the devices off when not in use will help to
extend battery life.
Getting to Know Your LifeBook
Quick Point Cursor Control (optional)
The optional Quick Point control offers an additional
method for moving the cursor. (See Optional Quick
Point Feature on page 17 for more information)
7
S7110.book Page 8 Monday, March 20, 2006 1:56 PM
LifeBook S7100 Notebook
DC Power Jack
S-Video Out Jack
Line In/Microphone Jack
Line Out/Headphone Jack
ExpressCard Slot
ExpressCard Eject Button
PC Card Eject Button
PC Card Slot
External Video Port (behind cover)
Figure 2-5. LifeBook notebook left-side panel
LEFT-SIDE PANEL COMPONENTS
The following is a brief description of your LifeBook
notebook’s left-side components.
DC Power Jack
The DC power jack allows you to plug in the AC adapter
to power your LifeBook notebook and charge the
internal Lithium ion battery.
S-Video Out Jack
The S-Video output is used to transmit a higher resolution video signal to a compatible TV or VCR.(See S-
Video Out Port (TV Out) on page 54 for more information)
Microphone/Line-In Jack
The microphone/line-in jack allows you to connect an
external audio source or an external mono microphone.
(See Microphone/Stereo Line-In Jack on page 54 for more
information)
Headphone/Line-Out Jack
The headphone/line-out jack allows you to connect
headphones or powered external speakers. (See Head-
phone/Line Out Jack on page 54 for more information)
ExpressCard Slot
The ExpressCard Slot allows you to insert an ExpressCard. (See PC Cards/ExpressCards™ on page 43 for more
information)
IEEE 1394 Jack
Air Vents
PC Card Eject Button
The PC Card eject buttons are used to eject a PC Card
from the PC Card slot. (See PC Cards/ExpressCards™ on
page 43 for more information)
PC Card Slot
The PC Card Slot allows you to insert a Type I or Type II
PC Card. (See PC Cards/ExpressCards™ on page 43 for
more information)
IEEE 1394 (4-pin) Jack
The 4-pin 1394 jack is used to connect between
your LifeBook and an IEEE 1394 peripheral such as a
digital video camera. (See IEEE 1394 Port on page 54 for
more information)
Air Vents
The air vents are used to cool the system to prevent over-
.
heating
To protect your notebook from damage
and to optimize system performance, be
sure to keep all air all vents unobstructed,
clean, and clear of debris. This may
require periodic cleaning, depending upon
the environment in which it is used.
Do not operate the notebook in areas
where the air vents can be obstructed,
such as in tight enclosures or on soft
surfaces like a bed or cushion.
ExpressCard Eject Button
The ExpressCard eject button is used to eject an ExpressCard from the ExpressCard slot. (See PC Cards/Express-
Cards™ on page 43 for more information)
8
External Video Port
The external video port allows you to connect an
external monitor or LCD projector. (See External Video
Port on page 54 for more information)
S7110.book Page 9 Monday, March 20, 2006 1:56 PM
Figure 2-6. LifeBook notebook right-side panel
Getting to Know Your LifeBook
Anti-Theft Lock Slot
Modem (RJ-11) Jack
USB 2.0 Port
Flexible Bay
Eject Lever
Flexible Bay
RIGHT-SIDE PANEL COMPONENTS
The following is a brief description of your LifeBook
notebook’s right-side components.
Modem (RJ-11) Telephone Jack
The Modem (RJ-11) telephone jack is for attaching
a telephone line to the internal multinational 56K
modem. (See Modem (RJ-11) Telephone Jack on page 52
for more information)
The internal modem is not intended for
use with Digital PBX systems. Do not
connect the internal modem to a Digital
PBX as it may cause serious damage to the
internal modem or your entire notebook.
Consult your PBX manufacturer’s
documentation for details. Some hotels
have Digital PBX systems. Be sure to find
out BEFORE you connect your modem.
The internal multinational modem is
designed to the ITU-T V.90 standard. Its
maximum speed of 53000bps is the
highest allowed by FCC, and its actual
connection rate depends on the line
conditions. The maximum speed is 33600
bps at upload.
For additional information about the
multinational modem, refer to the Fujitsu
website at: us.fujitsu.com/computers
Flexible Bay
The Flexible Bay can accommodate one of the following
devices. (See Flexible Bay Devices on page 19 for more
information)
■
Modular DVD-ROM drive
■
Modular DVD/CD-RW combo drive
■
Modular Dual-Layer Multi-Format DVD Writer
■
Modular Lithium ion battery
■
Wei g ht S ave r
Flexible Bay Eject Lever
The Flexible Bay eject lever releases the Flexible Bay
device.
USB 2.0 Port
The USB 2.0 port allows you to connect Universal Serial
Bus devices. USB 2.0 transfers data at up to 480Mbps
and is backward-compatible with USB 1.1 devices,
which transfer data at up to 12Mbps. (See Universal
Serial Bus Ports on page 53 for more information)
Anti-theft Lock Slot
The anti-theft lock slot allows you to attach an optional
physical lock down device.
9
S7110.book Page 10 Monday, March 20, 2006 1:56 PM
LifeBook S7100 Notebook
LAN (RJ-45) Jack
Anti-Theft Lock Slot
USB 2.0 Ports (Qty. 2)
Infrared Port
Figure 2-7. LifeBook notebook back panel
BACK PANEL COMPONENTS
Following is a brief description of your LifeBook notebook’s back panel components.
LAN (RJ-45) Jack
The internal LAN (RJ-45) jack is used for an internal
Gigabit (10Base-T/100Base-Tx/1000Base-T/Tx)
Ethernet LAN connection. (See Internal LAN (RJ-45)
Jack on page 52 for more information)
Anti-theft Lock Slot
The anti-theft lock slot allows you to attach an optional
physical lock down device.
USB 2.0 Ports
The USB 2.0 ports allow you to connect Universal Serial
Bus devices. USB 2.0 transfers data at up to 480Mbps
and is backward-compatible with USB 1.1 devices,
which transfer data at up to 12Mbps. (See Universal
Serial Bus Ports on page 53 for more information)
Infrared Port
The fast IrDA compatible port allows you to communicate with another IrDA compatible infrared device
without a cable. (See Infrared Port on page 53 for more
information)
10
S7110.book Page 11 Monday, March 20, 2006 1:56 PM
Battery Release Latch
Certificate of
Authenticity
(approximate
location)
Main Unit and
Configuration
Label
Getting to Know Your LifeBook
Lithium ion
Battery Bay
Latch Release
Port Replicator
Connector
Air Vents
Memory Upgrade
Compartment
Figure 2-8. LifeBook notebook bottom panel
BOTTOM COMPONENTS
The following is a brief description of your LifeBook
notebook’s bottom panel components.
Port Replicator Connector
This connector allows you to connect the optional Port
Replicator to your notebook.
Memory Upgrade Compartment
Your LifeBook notebook comes with high speed Double
Data Rate 2 (DDR2) Synchronous Dynamic RAM
(SDRAM). The memory upgrade compartment allows
you to expand the system memory capacity of your LifeBook notebook, hence improving overall performance.
(See Memory Upgrade Module on page 45 for more information)
Lithium ion Battery Bay
The battery bay contains the internal Lithium ion
battery. It can be opened for the removal of the battery
when stored over a long period of time or for swapping
a discharged battery with a charged Lithium ion battery.
(See Lithium ion Battery on page 40 for more information)
Air Vents
fies the exact version of various components of your
notebook.
Air Vents
The air vents are used to cool the system to prevent overheating.
To protect your notebook from damage
and to optimize system performance, be
sure to keep all air all vents unobstructed,
clean, and clear of debris. This may
require periodic cleaning, depending upon
the environment in which the system is
used.
Do not operate the notebook in areas
where the air vents can be obstructed,
such as in tight enclosures or on soft
surfaces like a bed or cushion.
Main Unit and Configuration Label
The configuration label shows the model number and
other information about your LifeBook notebook. In
addition, the configuration portion of the label has the
serial number and manufacturer information that you
will need to give your support representative. It identi-
11
S7110.book Page 12 Monday, March 20, 2006 1:56 PM
LifeBook S7100 Notebook
12
Power
AC Adapter
Battery IndicatorsOptical
Bluetooth On/Off
Figure 2-9. Status Indicator Panel
Status Indicator Panel
The Status Indicator displays symbols that correspond
with a specific component of your Fujitsu LifeBook
notebook. These symbols tell you how each of those
components are operating. (Figure 2-9)
POWER INDICATOR
The Power indicator symbol states whether your system
is operational. It has several different states, each of
which tells you the mode your notebook is in.
■
Steady On: This means that there is power to your
notebook and that it is ready for use.
■
Flashing: This means that your notebook is in Standby
mode.
■
Steady Off: This means that your system is either in
Save-to-Disk mode, or that your notebook has been
turned off.
If you are charging your battery, the Power indicator will
remain on even if your notebook is shut off. The Power
indicator will also remain on if you have either adapter
connected and are shut down from Windows.
AC ADAPTER INDICATOR
The AC Adapter indicator states whether your notebook
is operating from the AC adapter, Auto/Airline adapter
or battery. This icon has two different states that can tell
you what power source your notebook is using.
■
On: This means that either of the adapters are
currently in use.
■
Off: Power is only coming from the battery and you do
not have an adapter connected.
Drive Access
Hard Drive Access
PC Card Access
NumLk
CapsLk
ScrLkWireless LAN/
BATTERY LEVEL INDICATORS
The two Battery Level indicators shows whether or not
the primary Lithium ion battery and/or the optional
secondary Lithium ion battery is installed. Battery 1
refers to the primary battery; battery 2 refers to the Flexible Bay optional secondary battery. In addition, this
symbol states how much charge is available within each
installed battery. The symbol will only be displayed for a
battery that is currently installed in your notebook.
(Figure 2-10)
76%–100% Charging
76%–100%
51%–75%
26%–50%
11%–25%
Low Warning <11%
Critical Low or
Dead Battery
Shorted Battery
Figure 2-10 Battery Level Indicator
A shorted battery is damaged and must be
replaced.
(Figure 2-10)
12
S7110.book Page 13 Monday, March 20, 2006 1:56 PM
Getting to Know Your LifeBook
BATTERY CHARGING INDICATORS
Located to the left of each Battery Level indicator is a
small arrow symbol. This symbol indicates whether a
specific battery is charging. This indicator will flash if
the battery is too hot or cold to charge.
Batteries subjected to shocks, vibration or
extreme temperatures can be permanently
damaged.
WIRELESS LAN/BLUETOOTH
DEVICE ON/OFF INDICATOR
The Wireless LAN/Bluetooth On/Off indicator shows
whether the WLAN/Bluetooth switch is turned on.
OPTICAL DRIVE ACCESS INDICATOR
The Optical Drive Access indicator tells you that the
media drive is being accessed. If the Auto Insert Notification function is active, the indicator will flash periodically when your system is checking the optical drive. If
the Auto Insert Notification function is not active, the
indicator will only flash when you access the media
drive. The default setting is the Auto Insert Notification
function active.
PC CARD ACCESS INDICATOR
The PC Card Access indicator displays whether or not
your notebook is accessing a PC Card. The indicator will
flash if your software tries to access a PC Card even if
there is no card inserted. (See PC Cards/ExpressCards™
on page 43 for more information)
NUMLK INDICATOR
The NumLk indicator states that the integral keyboard is
set in ten-key numeric keypad mode.
CAPSLOCK INDICATOR
The CapsLock indicator states that your keyboard is set
to type in all capital letters.
SCRLK INDICATOR
The ScrLk indicator states that your scroll lock is active.
SECURITY INDICATOR
The Security Indicator flashes (if a password was set)
when the system resumes from Off or Standby modes.
You must enter the password that was set in the Security
Panel before your system will resume operation.
The DVD/CD-RW/CD-ROM Auto Insert
Notification function will periodically check
for a disc installed in the drive, causing the
Media Player Drive Access indicator to
flash. The DVD/CD-RW/CD-ROM Auto
Insert Notification function allows your
system to automatically start a disc as soon
as it is inserted in the drive and the tray is
closed. It will begin playing an audio DVD/
CD or will start an application if the DVD/
CD has an auto run file
HARD DRIVE OR REMOVABLE
MEDIA DRIVE ACCESS INDICATOR
The Hard Drive Access indicator states whether your
internal hard drive is being accessed.
If your LifeBook notebook has two hard
drives, the Hard Drive Access indicator
does not show which hard drive is being
accessed.
13
S7110.book Page 14 Monday, March 20, 2006 1:56 PM
LifeBook S7100 Notebook
Function Keys
Optional Quick Point
Fn Key
Start Key
Cursor Control
Numeric Keypad
(surrounded by heavy line)
Figure 2-11 Keyboard
Keyboard
USING THE KEYBOARD
Your Fujitsu LifeBook notebook has an integral 84-key
keyboard. The keys perform all the standard functions of
a 101-key keyboard, including the Windows keys and
other special function keys. This section describes the
following keys. (Figure 2-11)
■
Numeric keypad: Your notebook allows certain keys to
serve dual purposes, both as standard characters and
as numeric and mathematical keys. The ability to toggle between the standard character and numerical keys
is controlled through the [NumLk] key.
■
Cursor keys: Your keyboard contains four arrow
keys for moving the cursor or insertion point to the
right, left, up, or down within windows, applications
and documents.
■
Function keys: The keys labeled [F1] through [F12],
are used in conjunction with the [Fn] key to produce
special actions that vary depending on what program
is running.
■
Windows keys: These keys work with your Windows
operating system and function the same as the
onscreen Start menu button, or the right button
on your pointing device.
Home
Application KeyCursor Keys
End
NUMERIC KEYPAD
Certain keys on the keyboard perform dual functions as
both standard character keys and numeric keypad keys.
NumLk can be activated by pressing the [NumLk] keys.
Turning off the NumLk feature is done the same way.
Once this feature is activated you can enter numerals 0
through 9, perform addition ( + ), subtraction ( - ),
multiplication ( * ), or division ( / ), and enter decimal
points ( . ) using the keys designated as ten-key function
keys. The keys in the numeric keypad are marked on the
front edge of the key to indicate their secondary functions. (Figure 2-11)
WINDOWS KEYS
Your LifeBook notebook has two Windows keys,
consisting of a Start key and an Application key. The
Start key displays the Start menu. This button functions
the same as your onscreen Start menu button. The
Application key functions the same as your right mouse
button and displays shortcut menus for the selected
item. (Please refer to your Windows documentation for
additional information regarding the Windows keys.)
(Figure 2-11)
CURSOR KEYS
The cursor keys are the four arrow keys on the keyboard
which allow you to move the cursor up, down, left and
right in applications. In programs such as Windows
Explorer, it moves the “focus” (selects the next item up,
down, left, or right). (Figure 2-11)
14
S7110.book Page 15 Monday, March 20, 2006 1:56 PM
FUNCTION KEYS
Your LifeBook notebook has 12 function keys, F1
through F12. The functions assigned to these keys differ
for each application. You should refer to your software
documentation to find out how these keys are used.
(Figure 2-11)
The [Fn] key provides extended functions for the
notebook and is always used in conjunction with
another key.
■
[Fn+F3]: Pressing [F3] while holding [Fn] will toggle
the Audio Mute on and off.
■
[Fn+F4]: Pressing [F4] while holding [Fn] will toggle
the Quick Point feature on and off. Note that the
[Fn+F4] combination only works if Manual Setting is
selected in the BIOS. (See “BIOS Setup Utility” on
page 29)
■
[Fn+F6]: Pressing [F6] repeatedly while holding [Fn]
will lower the brightness of your display.*
■
[Fn+F7]: Pressing [F7] repeatedly while holding [Fn]
will increase the brightness of the display.*
■
[Fn+F8]: Pressing [F8] repeatedly while holding [Fn]
will decrease the volume of your LifeBook notebook.**
■
[Fn+F9]: Pressing [F9] repeatedly while holding [Fn]
will increase the volume of your LifeBook notebook.**
■
[Fn+F10]: Pressing [F10] while holding [Fn] allows
you to change your selection of where to send your
display video. Each time you press the combination of
keys you will step to the next choice. The choices, in
order, are: built-in display panel only, both built-in
display panel and external monitor or external
monitor only.
* There are eight brightness levels.
** There are 26 audio levels.
Getting to Know Your LifeBook
15
S7110.book Page 16 Monday, March 20, 2006 1:56 PM
LifeBook S7100 Notebook
Optional Quick Point Control
Cursor Control
Left Buttons
Scroll Button
Right Buttons
Figure 2-12. Touchpad pointing device
Touchpad Pointing Device
Certain S7100 LifeBook notebooks are
equipped with an optional “Quick Point”
button for moving the cursor. For more
information about Quick Point, see
“Optional Quick Point Feature” on
page 17.
The Touchpad pointing device comes built into your
Fujitsu LifeBook notebook. It is used to control the
movement of the pointer to select items on your display
panel. The Touchpad is composed of a cursor control,
two left and two right buttons, and a scrolling button.
The purpose of the upper left and right buttons is to
facilitate use of the optional cursor control button.
Certain configurations of the LifeBook
S7100 notebook have an optional fingerprint sensor instead of a scrolling button.
For information on using the optional fingerprint sensor, refer to “Fingerprint Sensor Device” on page 111.
An external mouse can be connected to
either the USB port on your LifeBook notebook or the USB or PS/2 ports on the
optional port replicator, and used simultaneously with the Touchpad. However, if
you boot the system with an external
mouse connected the Touchpad will be
disabled or enabled depending on the
specifications in your BIOS settings.
(See
BIOS Setup Utility on page 29 for more
information)
CLICKING
Clicking means pushing and releasing a button. To leftclick, move the cursor to the item you wish to select,
press the left button once, and then immediately release
it. To right-click, move the mouse cursor to the item you
wish to select, press the right button once, and then
immediately release it. You also have the option to
perform the clicking operation by tapping lightly on the
Touchpad once. (Figure 2-13)
The cursor control works the same way a mouse does,
and moves the cursor around the display. It only requires
light pressure with the tip of your finger. The left and
right buttons function the same as mouse buttons. The
actual functionality of the buttons may vary depending
on the application that is being used. The scrolling
button allows you to navigate quickly through pages,
without having to use the scroll bars. (Figure 2-12)
16
Figure 2-13 Clicking
S7110.book Page 17 Monday, March 20, 2006 1:56 PM
Getting to Know Your LifeBook
DOUBLE-CLICKING
Double-clicking means pushing and releasing the left
button twice in rapid succession. This procedure does
not function with the right button. To double-click,
move the cursor to the item you wish to select, press
the left button twice, and then immediately release it.
You also have the option to perform the double-click
operation by tapping lightly on the Touchpad twice.
(Figure 2-14)
Figure 2-14 Double-clicking
■
If the interval between clicks is too
long, the double-click will not be
executed.
■
Parameters for the Touchpad can be
adjusted from the Mouse Properties
dialog box located in the Windows
Control Panel.
TOUCHPAD CONTROL ADJUSTMENT
The Windows Control Panel allows you to customize your
Touchpad with selections made from within the Mouse
Properties dialog box.
SCROLLING
Using the Scrolling button allows you to navigate
through a document quickly without using the window’s
scroll bars. This is particularly useful when you are navigating through on-line pages. To use the Scrolling
button, press the crescent shape at the top or bottom of
the button to scroll up or down a page. When you have
reached the desired section of the page, release the
button. (Figure 2-16)
If your system configuration has an
optional fingerprint sensor instead of a
scrolling button, there is no button to click.
Instead, scrolling is performed by the sensor’s motion detector. For information on
using the optional fingerprint sensor, refer
to “Fingerprint Sensor Device” on
page 111.
DRAGGING
Dragging means pressing and holding the left button,
while moving the cursor. To drag, move the cursor to
the item you wish to move. Press and hold the left
button while moving the item to its new location
and then release it. Dragging can also be done using the
Touchpad. First, tap the Touchpad twice over the item
you wish to move making sure to leave your finger on
the pad after the final tap. Next, move the object to its
new location by moving your finger across the
Touchpad, and then release your finger. (Figure 2-15)
Figure 2-15 Dragging
Figure 2-16 Scrolling
OPTIONAL QUICK POINT FEATURE
The optional Quick Point device consists of a cursor
control button at the lower center of the keyboard. It is
roughly the same size and shape as a pencil eraser. The
cursor control works the same way a mouse ball does,
and moves the cursor around the display. It only requires
light pressure to move; the more pressure you use, the
faster the cursor will move.
When used with the Quick Point button, the middle
Touchpad button allows you to scroll up and down a
screen. As noted earlier, the purpose of the upper left
and right buttons is to facilitate use of the optional
cursor control button.
17
S7110.book Page 18 Monday, March 20, 2006 1:56 PM
LifeBook S7100 Notebook
Volume Control
Your Fujitsu LifeBook notebook has multiple volume
controls which interact with each other.
Any software that contains audio files will
also contain a volume control of its own. If
you install an external audio device that
has an independent volume control, the
hardware volume control and the software
volume control will interact with each
other. It should be noted that if you set
your software volume to Off, you will
override the external volume control
setting.
CONTROLLING THE VOLUME
■
The volume can be controlled in several different
ways:
■
Volume can be set from within the Volume Control
on the Taskbar.
■
Volume can be controlled with the F8 and F9 function
keys. Pressing [F8] repeatedly while holding [Fn] will
decrease the volume of your notebook. Pressing [F9]
repeatedly while holding [Fn] will increase the volume
of your notebook.
■
Volume can be controlled by many volume controls
that are set within individual applications.
■
Certain external audio devices you might connect to
your system may have hardware volume controls.
Each source discussed above puts an upper limit on the
volume level that must then be followed by the other
sources.
Volume muting can be toggled on and off by pressing
[F3] while holding the [Fn} button.
We recommend that you experiment with the various
volume controls to discover the optimal sound level.
18
S7110.book Page 19 Monday, March 20, 2006 1:56 PM
Getting to Know Your LifeBook
Flexible Bay Eject Lever
Flexible bay
Figure 2-17 Flexible Bay
Flexible Bay Devices
Your Fujitsu LifeBook notebook contains a Flexible Bay.
The Flexible Bay can house an optical drive, a Lithium
ion battery, or a weight saver. (Figure 2-17)
Your Flexible Bay will have one of the following devices
installed.
■
Modular Dual-Layer Multi-Format DVD Writer: This
allows you to access movies, software, and audio
DVD/CDs and record to DVD, CD, and DVD-RAM
discs.
■
Modular DVD/CD-RW combo drive: This allows you
to access movies, software, and audio DVD/CDs as
well as to write to CDs.
■
Modular DVD-ROM drive: This allows you to access
software, data, or audio DVDs and CDs.
■
Modular Lithium ion battery: This is a rechargeable
battery that can be used to power your LifeBook notebook when an adapter is not connected.
■
Weight Saver: This is used to fill the bay when no
device is needed.
REMOVING AND INSTALLING
MODULAR DEVICES
There are two ways to remove and install modular
devices in the Flexible Bay:
■
Cold-swapping: swapping devices while your LifeBook
notebook is powered off.
■
Hot-swapping: swapping devices while your system is
active using the Unplug/Eject icon from your taskbar.
You should never leave your Flexible Bay
empty when the notebook is in operation.
If left empty, dust or foreign matter may
accumulate inside the notebook.
Cold-swapping
To cold-swap modular devices in your Flexible Bay
follow these easy steps: (Figure 2-18)
1. Close any open files.
2. Shut down your LifeBook notebook.
3. Pull out the Flexible Bay eject lever. This will push
your device out slightly, allowing you to remove the
device.
4. Slide your device out until it is clear of the bay.
This will require light force.
Figure 2-18 Removing/Installing a device in the Flexible Bay
Be careful when aligning and seating
devices in the bay. If the fit is incorrect,
you may damage the bay or the device. If
the device does not move easily in the bay,
remove it, and check for dirt or foreign
objects. It will require a firm push to latch
the device in place.
19
S7110.book Page 20 Monday, March 20, 2006 1:56 PM
LifeBook S7100 Notebook
5. Slide the device you are installing into your
notebook until it clicks into place.
6. It is now safe to turn your notebook back on.
7. You can now access and use the device.
Your LifeBook notebook will automatically detect the
new device and activate it within your system. The drive
letters associated with the device will be created and
listed under My Computer and Windows Explorer.
Hot-swapping
Under Windows XP Home and Windows XP Professional, hot-swapping is provided through the Unplug or
Eject Hardware utility.
The icon for the utility appears on the taskbar. Click on
the icon and follow the on-screen instructions.
20
Loading...
+ 106 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.