Fujitsu S26381-K434-L100 Service Manual
Data Sheet Fujitsu PalmSecure OEM Sensor STD Accessories Security Access Protection
Data Sheet
Fujitsu PalmSecure OEM Sensor STD
Accessories Security Access Protection
Secure access to build upon
The Fujitsu PalmSecure OEM Sensor STD captures an individual´s palm image with a
near-infrared light for highly secure logins. The sensor cube is designed specically for
integration in other products and solutions. It provides the opportunity to build custom
secure access equipment based on Fujitsu PalmSecure technology.
Security
Highly secure biometric solution through palm vein authentication. It provides a
powerful combination of strong biometric authentication for log-in security, access
management and data protection for enterprise environments.
Usability and Ergonomics
PalmSecure is effortless to use. Simply hold the palm over the small infrared scanner
and within a second the identity is veried. Because the system is contactless it is
completely hygienic.
Designed for OEMs
Provides an off the shelf biometric identication solution for original equipment
manufacturers (OEMs) to integrate into their access systems.
Page 1 / 3 www.fujitsu.com/fts/accessories
Data Sheet Fujitsu PalmSecure OEM Sensor STD Accessories Security Access Protection
PalmSecure OEM Sensor STD
Technical specications
Max. operable lenght of USB cable: 4 m (no USB cable included!)
Lighting environment for authentication:
Natural light (sunlight): below 3.000 lux
Fluorescent light: below 3.000 lux
Incandescent / Halogen lamps: below 700 lux
Lighting environment for enrollment:
Natural light (sunlight): below 2.000 lux
Fluorescent light: below 2.000 lux
Incandescent / Halogen lamps: below 500 lux
Installation angle: Full direction
Encryption scheme: AES 128 bit
Authentiction rate: FRR: 0,01% (1 Retry) , FAR: below 0.00008%
When verifying 1 to 1 under ISO/IEC 19795
MTBF: 1.000.000 hours
Capturing distance: 40 to 60 mm
Power supply: 4.4 to 5.4 V
Power consumption: 2.5W max. provided by USB Interface cable
Current consumption: 500 mA max. / power saving mode: 45 mA max.
Required interface Recommended connector at the Sensor side: ACON brand: MNC12--5K5210 or equivalent
Audio: line-in / microphone
Notes USB mini-B plug (with 5 pins)
Compliance
Europe CE
USA/Canada CSA
FCC Class B
UL
Japan VCCI
Compliance link http://globalsp.ts.fujitsu.com/sites/certicates
Dimensions / Weight / Environmental
Dimensions (W x D x H) 35 x 35 x 27 mm
Weight 35 g max
Required interface Recommended connector at the Sensor side: ACON brand: MNC12--5K5210 or equivalent
Software support (Operating system) Microsoft® Windows ® 7 (32 bit and 64 bit)
Windows® XP
Windows 8
Order code
S26381-K434-L100
Page 2 / 3 www.fujitsu.com/fts/accessories
Loading...