Fujitsu S26361-F4043-L502 Service Manual
Data Sheet FUJITSU PFC QLE2740 / QLE2742 Fibre Channel Adapters
Data Sheet
FUJITSU PFC QLE2740 / QLE2742 Fibre Channel
Adapters
QLE2740 single port / QLE2742 dual port 32 Gbit PCIe 3.0 Host Bus Adapters
Fibre Channel Host Bus Adapters (HBA) enable
data exchange over large distances and extend
your existing FUJITSU server systems by including
communication interfaces using high-speed
communication technology. All connections are
redundant and hot-pluggable.
The combination of hardware and software
exemplies the high-performance quality of
communication.
The number of system restarts is reduced thanks
to optimized software and extended error check
functions help improve the integrity of your
company’s information.
PFC QLE2740 / QLE2742 Fibre Channel Adapters
The Gen6 32 Gb/s Fibre Channel Host Bus
Adapters (HBA) QLE2740 and QLE2742 for the
PRIMERGY & PRIMEQUEST servers are ideal for
virtualized environments and transaction intensive
applications. The adapters support the latest PCIe
3.0 standard for lower cooling and power costs. In
addition, QLogic StorFusion technology delivers
streamlined provisioning, guaranteed quality
of service (QoS), and improved resiliency while
addressing the needs of IT organizations that
require reliability, integrated management, and
guaranteed network performance.
solution offers higher per-port performance (~650K
IOPS) with low power consumption. The isolated
port architecture ensures reliable and consistent
performance. QLogics “QConverge Console™”
provides a simplied and exible management
oppurtunity, including the support of third-party
management tools, like a vCenter™ plugin for
VMware®.
Another point of cost reduction is the QLogic’s
“StarPower™” technology to gain the maximum
power efciency. This feature will ensure that the
PCIe host bus link uses the minimal number of PCIe
lanes, while continuing to maintain the highest
level of Fibre channel performance.
Upto 1.3 million IOPS are optimally prepared for
Fibre Channel connectivity to solid state disks
(SSDs) and new multi-core processors for best
storage application performance in virtualized and
non-virtualized deployments.
The adapters are backward compatible with
existing 8Gb and 16Gb Fibre Channel infrastructure,
leveraging existing SAN investments. QLogic’s Gen 6
Main Features Benefits
Support for 1 or 2 port 32 Gb/s Fibre Channel devices Provide up to high performance 64 Gb/s aggregate bandwidth
High performance throughput 32Gbps full-duplex line rate per port (maximum)
QLoigc STORFUSION TECHNOLOGY Highest level of reliabilty
Over 1.3 million IOPS Low latency in high transaction intensive applications and
virtualized environments
Using the fewest PCI Express® lanes in PCIe Gen3 environments Decreased power and cooling costs
Page 1 / 4 www.fujitsu.com/primergy
Data Sheet FUJITSU PFC QLE2740 / QLE2742 Fibre Channel Adapters
Technical details
Technical details
Controller type Fibre Channel Host Bus Adapter
Connector type LC-style
Operating system pre-installed Information to released operating systems can be found in the server datasheets. Details can be found in the
released drivers list on the support portal.
Released drivers list link http://support.ts.fujitsu.com/Download/Index.asp
Number of ports 1
2
Data transfer rate(s) 8 Gbit/s; 16 Gbit/s; 32 Gbit/s
Auto Negotiation support Yes
Bus interface PCIe 3.0 x8
Bus transfer rate 8GT/s
LEDs 3 LEDs per port (amber, green and amber) indecating port speed
Standards Throughput
> 32Gb/sec full-duplex line rate per port
Logins
> Support for 2048 concurrent logins and 2048 active exchanges
Port Virtualization
> NPIV (N_Port ID Virtualization)
Compliance
> SCSI-3 Fibre Channel Protocol (SCSI-FCP)
> Fibre Channel Tape (FC-TAPE) Prole
> SCSI Fibre Channel Protocol-2 (FCP-2)
> Second Generation FC Generic Services (FC-GS-2) and Third Generation FC Generic Services (FC-GS-3)
Technology Optics: 32 Gb/s short wave lasers with LC type connectors
Data transfer rate up to 32 Gbit/s
Supported cable length Operating at 32Gb
- OM4 (Multi-Mode 50/125μm, 4700 MHz*km) 100m
- OM3 (Multi-Mode 50/125μm, 2000 MHz*km) 70m
- OM2 (Multi-Mode 50/125μm, 500 MHz*km) 20m
Operating at 16Gb
- OM4 (Multi-Mode 50/125μm, 4700 MHz*km) 125m
- OM3 (Multi-Mode 50/125μm, 2000 MHz*km) 100m
- OM2 (Multi-Mode 50/125μm, 500 MHz*km) 35m
Operating at 8Gb
- OM4 (Multi-Mode 50/125μm, 4700 MHz*km) 190m
- OM3 (Multi-Mode 50/125μm, 2000 MHz*km) 150m
- OM2 (Multi-Mode 50/125μm, 500 MHz*km) 50m
FC Controller notes The controllers are equivalent to the original QLogic 2740 series
Fibre Channel interface MMF
Order code Product name (vendor) Height of bracket Number of ports Related product
MC-0JFCK1 QLE2740 Low Prole (LP) 1 PRIMERGY Server
MC-0JFCK2 QLE2740 Full Height (FH) 1 PRIMERGY Server
MC-0JFCL1 QLE2742 Low Prole (LP) 2 PRIMERGY Server
MC-0JFCL2 QLE2742 Full Height (FH) 2 PRIMERGY Server
MCX0JFCK1 QLE2740 Full Height / Low Prole 1 PRIMERGY Server
MCX0JFCL1 QLE2742 Full Height / Low Prole 2 PRIMERGY Server
S26361-F4043-E1 QLE2740 Full Height (FH) 1 PRIMERGY Server
S26361-F4043-E201 QLE2740 Low Prole (LP) 1 PRIMERGY Server
S26361-F4043-E202 QLE2742 Low Prole (LP) 2 PRIMERGY Server
S26361-F4043-E2 QLE2742 Full Height (FH) 2 PRIMERGY Server
S26361-F4043-L501 QLE2740 Full Height / Low Prole 1 PRIMERGY Server
Page 2 / 4 www.fujitsu.com/primergy
Loading...