RAID Controller SAS 12Gbit/s 4GB cache based on Broadcom MegaRAID® for internal storage devices
The RAID concept (Redundant Array of Independent
Disks) refers to several independent hard disks
which form a large logical drive when switched
together.
Redundancy information is calculated from
several data blocks (except for RAID 0) and saved
distributed to the individual hard disks. Your
operating system no longer accesses the individual
hard disks, but the array.
The actual objective of the RAID concept is to
increase availability and prevent downtimes in the
event of a hard disk failure. However, the theoretical
security of the RAID concept is only as good as
the RAID controller used. Benet from the Fujitsu
RAID controllers where technology, experience and
practical implementation all ensure the security that
your company needs in the event of an emergency.
PRAID EP540i
The Fujitsu RAID Controller PRAID EP540i with
4GB cache and16x12Gbit/s SAS ports improves
performance for storage intensive workloads such
as databases and sets new speed and data security
standards for internal storage drives. The new
PRAID EP540i supports up to 16 SAS/SATA drives,
up to 4 NVMe PCIe drives or a mixture of SAS/SATA
and NVMe drives. NVMe is an interface with lower
overhead, lower latency and drastically increased
bandwidth and IOP’s. The RAID stack is based on
the Broadcom MegaRAID® and offers high data
throughput, a comprehensive fault tolerance
function and user-friendly management options.
Moreover, the Controller management is integrated
seamlessly into the Fujitsu server management
concept. All controller functions are supported
by the Fujitsu ServerView RAID Manager. The
PRAID EP540i is designed for 3, 6 and 12Gbit/s
SAS as well as for 3 and 6Gbit/s SATA drives.
Regardless of the drive speed, it delivers signicant
performance improvements in both read and write
applications. The controller rmware also supports
FastPath® without an additional license. FastPath®
accelerates the use of SSD only congurations. The
RAID controller supports all of the important RAID
levels including RAID 6 and 60. The optional ash
battery backup (FBU) combined with the already
included TFM module ensures the integrity of the
data stored in the cache on the RAID controller in
case of a power outage. In this event, the data will
be copied to a non-volatile ash memory (TFM).
The TFM module is bundled with the controller, the
FBU is optional.
Important information for later upgrade from or
downgrade to std. SAS controller: Specic cable
sets per system can be required as L-Part, please
refer to Paper Congurator, order tool or controller
and system documentation. Orders ex factory are
congured with appropriate cables.
Main FeaturesBenefits
16 lines of 12Gbit/s SAS ports PCI Express® 3.0 Connect up to 64 HDDs and SSDs SAS3516 12Gbit/s RAID-on-Chip RAID levels 0, 1, 5 and 6 for more data security, RAID spans 10, 50
and 60 for more data security
16 lines of 8 Gbit/s PCIe Gen 3 for up to 4x x4 NVMe drives NVMe is an interface with lower overhead, lower latency and
drastically increased bandwidth and IOPS
4GB 2133MHz DDR4 cache memory Improves performance for storage intensive workloads (such as
databases) and for certain load proles like random access to
databases (especially for SSD drives)
Optional Flash Backup Unit (FBU), TFM is included Ensures the integrity in case of power outage, Long-term, secure
store of data and better serviceability compared to BBU
SafeStore for Disk Encryption is included free of charge Safe data encryption and data safety for hard disks in case of
removal
User Management Options Seamless merging of the RAID management into system
management
RAID Advanced Software Options. FastPath® is supported free of
charge by controller rmware. CacheCade® is no longer supported.
Page 1 / 4http://www.fujitsu.com/primergy
Page 2
Data Sheet FUJITSU PRAID EP540i
Technical details
Technical details
Controller SiliconRoC (RAID on Chip) SAS3516
Controller typeRAID 5/6 Ctrl.
Operating system pre-installedInformation to released operating systems can be found in the server datasheets. Details can be found in the
released drivers list on the support portal.
Released drivers list linkhttp://support.ts.fujitsu.com/Download/Index.asp
Number of ports16 ports int.
Connector internal4x SFF8643 (Mini-SAS HD)
Data transfer rate up to12 Gbit/s; 8 Gbit/s
Bus typePCIe 3.0
Bus widthx8
RAID ManagementServerView RAID Manager
StorCLI (command-line interface)
BIOS Conguration Utility
Key RAID Data Protection Feature- RAID levels 0, 1, 5 and 6
- RAID spans 10, 50 and 60
- Maximum number of spans is 8
- Online Capacity Expansion (OCE)
- Online RAID level Migration (RLM)
- Auto resume after loss of system power during array rebuild or reconstruction (RLM)
- Fast initialization for quick array setup
- Load Balancing
- Congurable stripe size up to 1MB
- Fast initialisation for quick array setup
- Check consistency for background data integrity - Make Data Consistent (MDC)
- Patrol read for media scanning and repairing
- Up to 64 logical drives per controller
- S.M.A.R.T support
- Global and dedicated Hot Spare with Revertible Hot Spare support
S26361-F4042-E125RAID Ctrl FBU option for PRAID EP5xx with 25cm cableinstalled - Super-capacitor incl. cable
S26361-F4042-E155RAID Ctrl FBU option for PRAID EP5xx with 55cm cableinstalled - Super-capacitor incl. cable
S26361-F4042-E183RAID Ctrl FBU option for PRAID EP5xx with 83cm cableinstalled - Super-capacitor incl. cable
S26361-F4042-E156RAID Ctrl FBU option for PRAID EP5xx with 55cm cable for
CX25x0 M4
S26361-F4042-E171RAID Ctrl FBU option for PRAID EP5xx with 70cm cable for
RX4770 M4
Page 2 / 4http://www.fujitsu.com/primergy
installed - Super-capacitor incl. cable
installed - Super-capacitor incl. cable
Page 3
Data Sheet FUJITSU PRAID EP540i
Order codeProduct NameNotes
S26361-F4042-L110RAID Ctrl FBU option for PRAID EP5xx with 25,55,83cm cableinstalled - Super-capacitor incl. cable
S26361-F4042-L112RAID Ctrl FBU option for PRAID EP5xx with 55cm cable for
CX25x0 M4
S26361-F4042-L113RAID Ctrl FBU option for PRAID EP5xx with 70cm cable for
RX4770
Compliance
Compliance notesAccording to the corresponding system
Compliance linkhttps://sp.ts.fujitsu.com/sites/certicates
installed - Super-capacitor incl. cable
installed - Super-capacitor incl. cable
Page 3 / 4http://www.fujitsu.com/primergy
Page 4
Data Sheet FUJITSU PRAID EP540i
More information
Fujitsu products, solutions & services
In addition to Fujitsu with PRAID EP540i,
Fujitsu provides a range of platform solutions.
They combine reliable Fujitsu products with
the best in services, know-how and worldwide
partnerships.
Fujitsu Portfolio
Build on industry standards, Fujitsu offers a full
portfolio of IT hardware and software products,
services, solutions and cloud offering, ranging
from clients to datacenter solutions and
includes the broad stack of Business Solutions,
as well as the full stack of Cloud offering. This
allows customers to leverage from alternative
sourcing and delivery models to increase
their business agility and to improve their IT
operation’s reliability.
Computing Products
www.fujitsu.com/global/products/computing/
Software
www.fujitsu.com/software/
More information
Learn more about Fujitsu PRAID EP540i,
please contact your Fujitsu sales
representative or Fujitsu Business partner, or
visit our website.
http://www.fujitsu.com/primergy
Fujitsu green policy innovation
Fujitsu Green Policy Innovation is our
worldwide project for reducing burdens on the
environment.
Using our global know-how, we aim to
contribute to the creation of a sustainable
environment for future generations through IT.
Please nd further information at http://www.
fujitsu.com/global/about/environment
Copyrights
All rights reserved, including intellectual
property rights. Designations may be
trademarks and/or copyrights of the respective
owner, the use of which by third parties for
their own purposes may infringe the rights of
such owner. For further information see http://
www.fujitsu.com/emeia/resources/navigation/
terms-of-use.html
Copyright 2020 FUJITSU LIMITED
Disclaimer
Technical data is subject to modication and
delivery subject to availability. Any liability
that the data and illustrations are complete,
actual or correct is excluded. Designations
may be trademarks and/or copyrights of the
respective owner, the use of which by third
parties for their own purposes may infringe
the rights of such owner.
All rights reserved, including intellectual property rights. Designations may be trademarks and/or copyrights of the respective
owner, the use of which by third parties for their own purposes may infringe the rights of such owner. For further information
see http://www.fujitsu.com/emeia/resources/navigation/terms-of-use.html
Copyright 2020 FUJITSU LIMITED
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.