Fujitsu S26361-F3842-L501 Service Manual

Data Sheet FUJITSU PRAID CP400i - 8 port 12Gb/s SAS, 6Gb/s SATA

Data Sheet

FUJITSU PRAID CP400i - 8 port 12Gb/s SAS, 6Gb/s
SATA

PRAID CP400i - 8 port 12Gb/s SAS, 6Gb/s SATA MegaRAID based on LSI SAS 3008

The RAID concept (Redundant Array of Independent
Disks) refers to several independent hard disks
which form a large logical drive when switched
together.
Redundancy information is calculated from
several data blocks (except for RAID 0) and saved
distributed to the individual hard disks. Your
operating system no longer accesses the individual
hard disks, but the array.
The actual objective of the RAID concept is to
increase availability and prevent downtimes in the
event of a hard disk failure. However, the theoretical
security of the RAID concept is only as good as

the RAID controller used. Benet from the Fujitsu

RAID controllers where technology, experience and
practical implementation all ensure the security that
your company needs in the event of an emergency.

PRAID CP400i - 8 port 12Gb/s SAS, 6Gb/s SATA

The Fujitsu PRAID CP400i SAS/SATA controller
card based on the LSI SAS3008 allows latest RAID
technology at affordable prices with low power
consumption. The PRAID CP400i MegaRAID entry
controller card offer users a straight-forward
solution that includes essential RAID levels and

uncomplicated conguration options.

The PRAID CP400i enables to connect to
combinations of SATA and SAS hard disk drives
and SSD solid state drives, allowing for storage

congurations that optimize cost, performance

and robust data protection. The CP400i enables

increased read/write performance thanks to its
RAID 0, 1, 10, 5, 50 implementation. The RAID5
performance of CP400i is suitable for entry
requirements. Higher performance is provided by
PRAID EP400i and EP420i with 1GB and 2GB Write
Back cache.

Benet from the close alignment of the RAID

hardware system and the ServerView® RAID

Manager software which offers fast initialization for

quick array setup.

Enjoy the world of easy conguration – and the
time and cost efciency that you have been

searching for.

Main Features Benefits

 12Gb/s SAS ports  Connect up to 8 SAS / SATA devices (SSD, HDD)
 PCIe 3.0 x8 (backward compatible to PCIe 2.0)  Extends the PCIe data rates up to 8.0 GT/s per lane

 LSISAS3008 12Gb/s  RAID levels 0, 1, 10, 5, 50 for more data security
 User RAID Management  Fully supported by PRIMERGY ServerView RAID Manager

Page 1 / 3 www.fujitsu.com/primergy

Data Sheet FUJITSU PRAID CP400i - 8 port 12Gb/s SAS, 6Gb/s SATA

Technical details

Technical details

Controller Silicon LSI SAS3008
Controller type RAID Ctrl.
Operating system Information to released operating systems can be found in the server datasheets. Details can be found in the

released drivers list on the support portal.

Released drivers list link http://support.ts.fujitsu.com/Download/Index.asp
Number of ports 8 ports int.
Connector internal 2x SFF8643 (Mini-SAS HD)
Data transfer rate up to 12 Gbit/s
Bus interface PCIe 3.0 x8
RAID Management Fully supported by PRIMERGY ServerView RAID Manager (AURA) for RAID management
Key RAID Data Protection Feature RAID levels 0, 1, 10, 5, 50

RAID Level Migration (RLM)
Auto resume after loss of system power during array rebuild or reconstruction

Fixed stripe size of 64kB
Fast initialization for quick array setup

Check Consistency for background data integrity - Make Data Consistent (MDC)
Patrol read for media scanning and repairing
16 logical drive support

Conguration on Disk (COD)

S.M.A.R.T support

RAID level 0, 1, 1E, 10, 5, 50
RAID cache backup unit No FBU support
Interface technology SAS/SATA

Order code Product Name Height of bracket Number of Connectors Related product

S26361-F3842-E1 PRAID CP400i Matching to system 2 PRIMERGY Server

Compliance

Compliance notes According to the corresponding system
Compliance link http://globalsp.ts.fujitsu.com/sites/certicates

Page 2 / 3 www.fujitsu.com/primergy