Fujitsu PDS6101W, PDS5004W, PDS5003U, PDS5003W, PDS5004U User Manual

Download

USER’S MANUAL

50”/61” WIDE PLASMA DISPLAY

PDS5003W/PDS5004W/ PDS5003U/PDS5004U/ PDS6101W

Page Page

Before Use

• Safety Precautions ··································· E-2–E-3

• Features ····························································E-4

• Accessories······················································ E-5

• Handy Tips ······················································· E-5

• Installation ······················································· E-6

Usage

• Part Names and Functions ·····················E-7–E-11

• Using the Remote Control·····························E-12

• Connecting the Display to External Equipment ············································ E-13–E-15

• Basic Operations ············································E-16

• Selecting Input Mode·····································E-17

•

Watching Pictures on the Wide Screen ···

• How to Use Menus······························· E-20–E-25

E-18–E-19

Adjustments

• Adjusting Pictures (PICTURE Menu)··· E-26–E-27

• Adjusting Screen Position and Size (POSITION/SIZE Menu)························ E-28–E-29

• Adjusting Audio (AUDIO Menu)·········· E-30–E-31

•

Other Adjustments (FEATURES Menu) ···

• Initialization of user adjustment value (FACTORY DEFAULT) ·····································E-41

Others

• Options····························································E-42

• Factory Settings············································· E-43

• Specification ···················································E-44

• Cleaning and Maintenance····························E-46

E-32–E-40

Before using the display, read this manual carefully so that you know how to use the display correctly. Refer to this manual whenever questions or problems about operation arise. Be sure to read and observe the safety precautions. Keep this manual where the user can see it easily. * Installation and removal require special expertise. Consult your product dealer for details.

DECLARATION OF CONFORMITY

according to EN45014

Fujitsu General (U.K.) Co. Limited

Unit 150, Centennial Park, Centennial Avenue Elstree, Hertfordshire, WD6 3SG

Manufacturer: Shinjyo Fujitsu General Limited

702-3 Kanazawa Shinjyo-shi Yamagata Japan

declares under our sole responsibility that the product,

Type: 50” PLASMA DISPLAY Model Name: PDS5003W

to which this declaration relates are in conformity with the following standards;

European Standards:

EMC: a. EN55022 1994/A1:1995/A2:1997/A3:1998 Class A

b. EN61000-3-2 1995 c. EN61000-3-3 1995 d. EN55024 1998

(EN61000-4-2 1995 / EN61000-4-3 1996) (EN61000-4-4 1995 / EN61000-4-5 1995 / EN61000-4-6 1996) (EN61000-4-8 1993 / EN61000-4-11 1994)

Safety: e. EN60065

By conformance with the standard referenced, the product follows

the provisions of the directives listed below.

a. EC Council Directive 89/336/EEC of 3rd, May 1989 b. EC Council Directive 92/31/EEC of 28th, April 1992 c. EC Council Directive 93/68/EEC of 22nd, July 1993 d. EC Council Directive 73/23/EEC of 19th, February 1973

Place of Issue: United Kingdom Date of Issue: Jan. 2002

Signature:

Declaration reference: Fujitsu General (U.K) Co. Limited

Unit 150, Centennial Park, Centennial Avenue Elstree, Hertfordshire, WD6 3SG, United Kingdom Tel: + 44-(0)20-8731-3450 Fax:+ 44-(0)20-8731-3451

H. Hirosaki, Chief Exective Officer Fujitsu General (U.K) Co. Limited

DECLARATION OF CONFORMITY

according to EN45014

Fujitsu General (U.K.) Co. Limited

Unit 150, Centennial Park, Centennial Avenue Elstree, Hertfordshire, WD6 3SG

Manufacturer: Shinjyo Fujitsu General Limited

702-3 Kanazawa Shinjyo-shi Yamagata Japan

declares under our sole responsibility that the product,

Type: 50” PLASMA DISPLAY Model Name: PDS5004W

to which this declaration relates are in conformity with the following standards;

European Standards:

EMC: a. EN55022 1994/A1:1995/A2:1997/A3:1998 Class B

b. EN61000-3-2 1995 c. EN61000-3-3 1995 d. EN55024 1998

(EN61000-4-2 1995 / EN61000-4-3 1996) (EN61000-4-4 1995 / EN61000-4-5 1995 / EN61000-4-6 1996) (EN61000-4-8 1993 / EN61000-4-11 1994)

Safety: e. EN60065

By conformance with the standard referenced, the product follows

the provisions of the directives listed below.

Place of Issue: United Kingdom Date of Issue: Jan. 2002

Signature:

Declaration reference: Fujitsu General (U.K) Co. Limited

Unit 150, Centennial Park, Centennial Avenue Elstree, Hertfordshire, WD6 3SG, United Kingdom Tel: + 44-(0)20-8731-3450 Fax:+ 44-(0)20-8731-3451

H. Hirosaki, Chief Exective Officer Fujitsu General (U.K) Co. Limited

DECLARATION OF CONFORMITY

according to EN45014

Fujitsu General (U.K.) Co. Limited

Unit 150, Centennial Park, Centennial Avenue Elstree, Hertfordshire, WD6 3SG

Manufacturer: Shinjyo Fujitsu General Limited

702-3 Kanazawa Shinjyo-shi Yamagata Japan

declares under our sole responsibility that the product,

Type: 61” PLASMA DISPLAY Model Name: PDS6101W

to which this declaration relates are in conformity with the following standards;

European Standards:

EMC: a. EN55022 1994/A1:1995/A2:1997/A3:1998 Class A

b. EN61000-3-2 1995 c. EN61000-3-3 1995 d. EN55024 1998

(EN61000-4-2 1995 / EN61000-4-3 1996) (EN61000-4-4 1995 / EN61000-4-5 1995 / EN61000-4-6 1996) (EN61000-4-8 1993 / EN61000-4-11 1994)

Safety: e. EN60950 1992/A1:1993/A2:1993/A3:1995/A4:1997

By conformance with the standard referenced, the product follows

the provisions of the directives listed below.

Place of Issue: United Kingdom Date of Issue: Feb. 2002

Signature:

Declaration reference: Fujitsu General (U.K) Co. Limited

Unit 150, Centennial Park, Centennial Avenue Elstree, Hertfordshire, WD6 3SG, United Kingdom Tel: + 44-(0)20-8731-3450 Fax:+ 44-(0)20-8731-3451

H. Hirosaki, Chief Exective Officer Fujitsu General (U.K) Co. Limited

SAFETY PRECAUTIONS

FCC NOTICE

• PDS5003W/PDS5003U/PDS6101W: A Class A digital device This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These

limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

• PDS5004W/PDS5004U: A Class B digital device This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These

limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

– Reorient or relocate the receiving antenna. – Increase the separation between the equipment and receiver. – Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. – Consult the dealer or an experienced radio/TV technician for help.

IMPORTANT INFORMATION

WARNING: This is a Class A and Class B product. In a domestic environment this product may cause radio

interference in which case the user may be required to take adequate measures.

WARNING: TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS

PRODUCT TO RAIN OR MOISTURE.

IMPORTANT

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

CAUTION: TO PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR

BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

IMPORTANT SAFEGUARDS

Electrical energy can perform many useful functions. This unit has been engineered and manufactured to assure your personal safety. But IMPROPER USE CAN RESULT IN POTENTIAL ELECTRICAL SHOCK OR FIRE HAZARD. In order not to defeat the safeguards incorporated into this product, observe the following basic rules for its installation, use and service. Please read these “Important Safeguards” carefully before use.

– All the safety and operating instructions should be read before the product is operated. – The safety and operating instructions should be retained for future reference. – All warnings on the product and in the operating instructions should be adhered to. – All operating instructions should be followed. – Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. – Do not use attachments not recommended by the product manufacturer as they may cause hazards. – Do not use this product near water. Do not use immediately after moving from a low temperature to high temperature, as this causes

condensation, which may result in fire, electric shock, or other hazards.

– The apparatus shall not be exposed to dripping or splashing. – No objects filled with liquids, such as vases, shall be placed on the apparatus.

E-2

– Do not place this product on an unstable cart, stand, or table. The product may fall, causing serious injury to a child or

adult, and serious damage to the product. The product should be mounted according to the manufacturer’s instructions, and should use a mount recommended by the manufacturer.

– When the product is used on a cart, care should be taken to avoid quick stops, excessive force, and uneven surfaces

which may cause the product and cart to overturn, damaging equipment or causing possible injury to the operator.

– Slots and openings in the cabinet are provided for ventilation. These ensure reliable operation of the product and protect it from

overheating. These openings must not be blocked or covered. (The openings should never be blocked by placing the product on bed, sofa, rug, or other similar surface. It should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided and the manufacturer’s instructions have been adhered to.)

For proper ventilation, separate the product from other equipment, which may prevent ventilation, and keep distance more than 10 cm.

– This product should be operated only from the type of power source indicated on the label. If you are not sure of the type of power

supply of your home, consult your product dealer or local power company.

– This product is equipped with a three-wire plug. This plug will fit only into a grounded power outlet. If you are unable to insert the plug

into the outlet, contact your electrician to install the proper outlet. Do not defeat the safety purpose of the grounded plug.

– Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them. Pay

particular attention to cords at doors, plugs, receptacles, and the point where they exit from the product.

– For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it

from the wall outlet and disconnect the cable system. This will prevent damage to the product due to lightning and power line surges.

–

Do not overload wall outlets, extension cords, or convenience receptacles on other equipment as this can result in a risk of fire or electric shock.

– Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short out parts that

could result in a fire or electric shock. Never spill liquid of any kind on the product.

– Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltages and other hazards.

Refer all service to qualified service personnel.

– Unplug this product from the wall outlet and refer service to qualified service personnel under the following conditions:

a) When the power supply cord or plug is damaged. b) If liquid has been spilled, or objects have fallen on the product. c) If the product has been exposed to rain or water. d) If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the

Operation Manual, as an improper adjustment of other controls may result in damage and will often require extensive work by a

qualified technician to restore the product to its normal operation. e) If the product has been dropped or damaged in any way. f) When the product exhibits a distinct change in performance—this indicates a need for service.

– When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or with

same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards.

– Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the

product is in proper operating condition.

– The product should be placed more than one foot away from heat sources such as radiators, heat registers, stoves, and other products

(including amplifiers) that produce heat.

– When connecting other products such as VCR’s, and personal computers, you should turn off the power of this product for protection

against electric shock.

– Do not place combustibles behind the cooling fan. For example, cloth, paper, matches, aerosol cans or gas lighters that present special

hazards when overheated.

– Use only the accessory cord designed for this product to prevent shock.

The power supply voltage rating of this product is AC220–240 V (50” W type) and AC120 V (50” U type) and AC100-240 V (61” W type), and the power cord attached conforms to the following power supply voltage. Use only the power cord designated by our dealer to ensure Safety and EMC.

When it is used with other power supply voltage, the power cable must be changed. Use the standard power plug and cord set of the specified country.

Power cord

Consult your product dealer.

English

Power supply voltage:

AC 100–125 V

(50”U,61”W Type:Included)

(50”W Type:Not Included)

AC 200–240 V

(50”U,61”W Type:Not Included)

(50”W Type:Included)

AC 240 V (SAA TYPE)

(Not included)

E-3

FEATURES

This display uses a plasma display panel and is only 9.8 cm (50”) /11.8 cm (61”) deep. With its high picture quality and performance, it is perfectly suited for multimedia applications.

Variety of input signals

• In addition to video, S-video, and RGB, signals, this display supports input of high-quality video signals such as DVD and HDTV.

• The display has an RGB input terminal to receive digital RGB signal of DVI standard to display a high definition picture quality in

addition to mD-sub terminal and BNC terminal.

• Depending on the model, the display supports video input for different color television systems as follows: NTSC, PAL, SECAM,

PAL60, N-PAL, M-PAL, 4.43NTSC.

• The display has a component video input terminal to receive signals from the DVD player and HDTV equipment as well as digital

broadcasting signals (color difference signals).

• The display has an RGB input terminal to receive signals, including VGA, SVGA, XGA,SXGA and UXGA

5 screen sizes (Video input mode) and 3 screen sizes (RGB input mode)

• This display offers a total of five different screen sizes in video input mode: Wide1, Wide2, Zoom1, and Zoom2.

A Normal mode is also available for displaying of normal-size (4:3 aspect ratio) pictures.

• The display has an Auto mode to switch screen size automatically depending on the contents of software.

• Three different screen sizes in RGB input mode (Normal, Wide, and Zoom) are also available.

Vertical installation

• The display can be installed vertically, enabling advertisement to be displayed. In this case, you can set up the display so that on-screen

information, such as input modes and menus, is displayed properly.

Power management function

• The display features a DPMS (Display Power Management Signaling) function that ensures automatic power saving capability.

Flexible as part of a system

• You can operate the display by remote control using the RS-232C interface.

• If you have two or more displays, you can assign a unique number to each of them so that you can select which one you want to use.

• Input Priority function for selecting automatic switching to desired mode is provided to avoid troublesome operation.

• Main unit key lock function can prevent mischief and malfunction.

Others

• Troublesome adjustment of clock phase can be avoided by automatic clock phase adjustment function (Automatic Clock Phase

function).

• You can specify the color temperature.

• The white screen and screen orbiter functions are available to minimize phosphor burn-in.

• 3 audio input terminals and 8W + 8W (50”) / 20W + 20W (61”) external speaker output terminal are available.

• A clear picture can be obtained by digital noise reduction function.

• A display suitable for such film materials as movie pictures can be made by 24 frame mode function.

*1 The refresh rate of 60, 72, 75 and 85 Hz for SVGA (800 x 600) and those of 60, 70, 75 Hz for XGA (1024 x 768) and those of 60, 75

Hz for SXGA (1280 x 1024) and those of 60, 75, 85 Hz for UXGA (1600 x 1200) are supported.

Note that the SXGA and UXGA pictures will be compressed when displayed on the screen.

E-4

ACCESSORIES

CHECKING ACCESSORIES

One remote control Two AA batteries One user’s manual

Manual

One power cable

(50”U,61”W Type)

(50”W Type)

Two big ferrite cores and

two small ferrite cores

HANDY TIPS

• Pictures may become “burnt” into the screen phosphors if the screen is left on for extended periods. To ensure that the display has a

prolonged service life, be sure to use a screen orbiter, white screen. This will ensure the same picture or pattern is not constantly displayed for long periods. (See P.E-38-39.)

• The plasma display panel, which is built for maximum precision, provides more than 99.99% effective pixels. You may find,

however, that some pixels constantly remain lit or dimmed.

• The display has a fan to prevent its internal temperature from rising.

• Be careful with the air delivered by the fan. It may be very hot.

• Contact your dealer if you find that the display does not seem to function properly when used with other audio-visual equipment.

You may need to move your display if it produces degraded pictures or noise due to electromagnetic radiation, or if the infrared remote control does not function properly.

• Pictures may not be displayed properly if you connect a non-standard PC to the RGB input terminal. In this case, contact your dealer

for more information.

• The protective circuit, built into the display, automatically turns off the power if the display has a problem. In this case, you will see

that the power indicator lamp flashes red.

English

Warning

If the power indicator lamp flashes red, this signifies that the display has developed a problem. When this happens, be sure to remove the power plug from the receptacle to prevent fire or electric shock. Then, check the display in accordance with the instructions given on P. E-42, or contact your dealer.

• Viewing the screen constantly for extended periods can strain your eyes. Be sure to stay at a proper distance (at least 1.9 m or 6.3

feet (50”) / 2.4 m or 8.0 feet (61”) ) from the screen and to look occasionally away while working.

• Have the display inspected and cleaned by your dealer at regular intervals.

Information

Cables for connecting the display to external equipment are not supplied. Contact your dealer for more information on these products.

E-5

INSTALLATION

To prevent the display’s internal components from overheating, make sure that the display is installed in a well-ventilated location. Be sure to use the optional desktop stand, ceiling-mounting unit, wall-mounting unit and other unit when installing this display. Also, be

sure that your dealer performs the installation. See the appropriate instruction manual for more information on the installation hardware you select. To ensure proper heat radiation, provide at least as much space around the display as shown below.

* Make sure that the display is installed in a location where the temperature can be maintained between 0°C and 40°C. * Never attempt to tilt the display sideways or backward. * To prevent the power and other cables from being accidentally pulled, be sure to make the wiring work along the wall or through the

corners of floor. * The display can be installed with either of its sides facing down. * To prevent an accident and ensure safety in the event of an earthquake, fix the display securely into position as described below.

When using the stand

Front Side

Upper

(cm) (cm)

Left

Floor

Right

Stand

When using other unit than desktop stand (horizontal type)

Front Side

(cm) (cm)

Upper

Left

Lower

Right

Wall

Floor

Stand

When using other unit than desktop stand (vertical type)

Front Side

Left

Upper

Lower

(cm)

Right

(cm)

Wall

CAUTION:When installing the display vertically, setup vertical installation. (Refer to Installation. See P.E-40)

Consult your dealer when installing the display vertically.

Note

The display is a highly precise piece of equipment and therefore must be packed properly before transportation. Be sure to use only those packing materials originally supplied with the display when repacking it.

Reference

See P.E-42 for more information on options.

E-6

PART NAMES AND FUNCTIONS

Front (both 50" and 61")

1 Power indicator lamp

This lamp shows the state of the power supply.

Lit (red): Power OFF (stand-by) Lit (green): Power ON Lit (orange): Power saving (DPMS: Power saving

function) mode ON

Flashing (red): Malfunction (Flashes differently depending

on the type of malfunction. See P. E-46 for more information.)

2 Remote control signal receiver

Receives signals from the remote control.

3 Power button

Turns the power ON or OFF (stand-by).

4 Input mode selector button [MODE]

Switches between picture input modes.

5 Wide screen selector button [WIDE]

Switches the screen over to a desired wide screen.

6 Menu button [MENU]

Displays picture adjustment menus.

7 Adjustment buttons [

The [ / ] buttons can also be used to scroll through the options when a menu is displayed.

8 Adjustment buttons [

The [

/ ] buttons can also be used to scroll through options

in a menu, or to change values.

9 Enter button [ENTER]

Press this button to finalize the selection of a desired option in a menu.

/ ]

English

Warning

If the power indicator lamp flashes red, this signifies that the display has developed a problem. When this happens, be sure to remove the power plug from the receptacle and contact your dealer. Leaving the display power ON can result in fire or electric shock.

E-7

PART NAMES AND FUNCTIONS (Continued)

Bottom (50”)

Bottom (61”)

1 OFF/STD-BY switch

OFF : STD-BY :The power indicator lamp lights red, and the power can be turned on or off by the power button.

2 RGB 2 input terminal (RGB 2 INPUT/mD-sub)

Connect this terminal to the PC’s display (analog RGB) output terminal or decoder (digital broadcast tuner, etc.) output terminal.

3 RGB 1 input terminal (RGB 1 INPUT/DVI-D)

Connect this terminal to the PC’s display (digital RGB) output terminal *The connection cable No.88741-8000 made by

4 RS-232C terminal (RS-232C)

This terminal is provided for you to control the display from the PC. Connect it to the RS-232C terminal on the PC. When connecting a cable, attach a ferrite core to the cable. (See P. E-13.)

5 Power input terminal

Connect this terminal to the power cable supplied with the display. When connecting a cable,attach a ferrite core to the cable. (See P. E-13)

6 External speaker output terminal (EXT SP)

Connect this terminal to the optionally available speaker. (When using other speaker than the optional one, use 6 Ω speaker for 50” type and 4 - 16 Ω for 61” type.) When connecting a cable,attach a ferrite core to the cable. (See P. E-13) *See the speaker instruction manual for more information.

7 Sound 3 input terminal (AUDIO 3 INPUT)

Connect this terminal to the sound output terminal of your VCR, etc. (See P.E-37 for the selection of audio input for video input.)

8 Sound 2 input terminal (AUDIO 2 INPUT)

Connect this terminal to the sound output terminal of your VCR, etc. (See P.E-37 for the selection of audio input for video input.)

The power indicator lamp goes off, and the power can’t be turned on by the power button. The power is partly supplied.

molex Inc. is recommanded.

E-8

9 Sound 1 input terminal (AUDIO 1 INPUT)

Connect this terminal to the sound output terminal of your VCR, etc. (See P.E-37 for the selection of audio input for video input.)

0 RGB 3 synchronization switch (SYNC SW TTL/ANALOG (75 Ω))

This switch is used to terminate horizontal (H) terminal and vertical (V) terminal, out of RGB3 input terminals, with 75 Ω .

TTL : Does not terminate. ANALOG (75 Ω): Terminates.

A+B RGB 3 input terminal (RGB 3 INPUT/BNC)

Connect this terminal to the PC's display (analog RGB) output terminal or decoder (digital broadcast tuner,etc.) output terminal. *When RGB3 input terminal is connected, Comp.video mode is not available. (See P. E-35.)

B Component video input terminal (COMPONENT VIDEO INPUT)

Connect this terminal to the component video output (color difference output) terminal of your HDTV unit or DVD player. *When Comp.video input terminal is connected, RGB3 mode is not available. (See P. E-35.)

C Video input terminal (VIDEO INPUT)

Connect this terminal to the video output terminal of your VCR.

D S-Video input terminal (S-VIDEO INPUT)

Connect this terminal to the S-video output terminal of your VCR.

English

E-9

PART NAMES AND FUNCTIONS (Continued)

Description of Input Terminals

DVI-D terminal (RGB 1 INPUT/DVI-D)

RGB2 input terminal (RGB2 INPUT/mD-sub)

RS-232C terminal (RS-232C)

Pin No. Input signal Pin No. Input signal

1Red 9— 2 Green 10 Ground 3 Blue 11 — 4 — 12 — 5 Ground 13 Horizontal synchronization 6 Ground 14 Vertical synchronization 7 Ground 15 — 8 Ground Frame Ground

Pin No. Signal

1 DCD (Data Carrier Detect) 2 RD (Received Data) 3 TD (Transmit Data) 4 DTR (Data Terminal ready) 5 GND (Ground) 6 DSR (Data Set Ready) 7 RTS (Request To send) 8 CTS (Clear To Send) 9 RI (Ring Indication)

E-10

Remote Control

1 Power ON button [POWER ON] ➝ (See P. E-16.) 2 Power OFF button [POWER OFF] ➝ (See P. E-16.)

3 RGB input mode selector button [RGB] ➝ (See P. E-17.)

4 Video input mode selector button [VIDEO] ➝ (See P. E-17.)

5 Wide screen selector button [WIDE] ➝ (See P. E-18–E-19.)

6 Menu button [MENU] ➝ (See P. E-20–E-41.)

Use this button to display a desired menu for adjusting the picture.

7 Volume adjustment buttons [VOL +/-] ➝ (See P. E-16.)

Adjust the volume. Press the + button to increase the volume.

Press the - button to reduce the volume.

8 Adjustment buttons [

Use these buttons to scroll through options in a menu and change values.

9 Enter button [ENTER] ➝ (See P. E-20–E-41.)

Press this button to finalize the selection of a desired menu or option within a menu.

0 Display selector buttons [SHIFT 1–4] ➝ (See P. E-39 .)

When you use two or more displays, you can use these buttons to control up to four displays by assigning a unique number to each display.

/ / / ] ➝ (See P. E-20–E-41.)

English

PUTTING BATTERIES IN THE REMOTE CONTROL

1 To remove the cover, slide it

outwards while pressing it down.

2 Place two AA batteries in the

remote control. Make sure that the batteries are properly oriented.

CAUTION:Be sure to use replacement batteries of the same type as the original ones.

When disposing of used batteries, please comply with governmental regulations or environmental public institution’s rules that apply in your country/area.

3 Close the cover until it snaps into

place.

Note

The remote control will not function properly if the batteries are dead. Be sure to replace them as needed. Do not use rechargeable batteries (Ni-Cd).

E-11

USING THE REMOTE CONTROL

PRECAUTIONS

To prevent malfunction, be sure not to apply any form of severe shock to the remote control.

To prevent malfunction or deformation, be sure not to allow the remote control to become wet; also, keep it away from hot locations or heating equipment.

Be sure not to clean the remote control using a cloth dampened in any volatile solvent, such as benzene or thinner.

EFFECTIVE RANGE FOR THE REMOTE CONTROL

Point the remote control at the display’s signal receiver when using it. Make sure that there are no obstacles between the remote control and the display’s signal receiver.

30°

5 m (Front)

30°

Upper

20°

Lower

RightLeft

Information

The remote control may not function properly if you use a high-frequency fluorescent lamp. If you experience problems, move the lamp or use the remote control from a different position.

E-12

CONNECTING THE DISPLAY TO EXTERNAL EQUIPMENT

Be sure to turn OFF the power to the display and external equipment before making any connections. No cables are supplied with the display for connection to external equipment. The type of cable to be used varies depending on the PC

model. Contact your dealer for more information.

RECEPTACLE

Make sure that the power cable’s grounding wire is grounded. The display comes with a 3-prong power plug; one prong is connected to the grounding wire. If you have only a 2-hole receptacle, you

will need to have it replaced. Contact your dealer for more information.

CONNECTING THE DISPLAY TO EXTERNAL EQUIPMENT

Carefully check the terminals for position and type before making any connections. Loose connectors can result in picture or color problems. Make sure that all connectors are securely inserted into their terminals.

English

Terminal Connector

VIDEO INPUT BNC S-VIDEO INPUT S terminal COMPONENT VIDEO INPUT BNC x 3 RGB INPUT mD-sub 15-pin , BNC x 5 , DVI-D AUDIO INPUT Pin jack RS-232C D-sub 9-pin

Fer rite cores

These ferrite cores are used to attenuate undesired signals.

Two big ferrite cores

When connecting a cable to the power input terminal, RS-232C terminal, attach one of these ferrite cores to the cable near the terminal.

Power Cable

Ferrite core

RS-232C Cable

Ferrite core

Two small ferrite cores

When connecting a cable to the external speaker output terminal attach one of these ferrite cores to the cable near the terminal.

Ferrite core Ferrite core

E-13

(50”)

CONNECTING THE DISPLAY TO EXTERNAL EQUIPMENT(Continued)

To video

output

terminal

VIDEO INPUT

To S-video

terminal

output

S-VIDEO

INPUT

To RS-232C

RS-232C

output

terminal

RGB1

INPUT

(DVI-D)

To display

(digital RGB)

output

terminal

RGB2

INPUT

(mD-sub)

To display

(analog RGB)

output

terminal

AUDIO1

INPUT

To sound

output

terminal

AUDIO2

INPUT

To sound

output

terminal

AUDIO3

INPUT

To sound

output

terminal

EXT

speaker

receptacle

POWER INPUT

COMPONENT

VIDEO INPUT

(color difference

input) /

RGB3 INPUT

To color difference

output terminal /

To display

(analog RGB)

output terminal

E-14

(61”)

English

POWER INPUT

To receptacle

COMPONENT VIDEO INPUT

(color difference

input) /

RGB3 INPUT

To color difference

output terminal /

To display

(analog RGB)

output terminal

RGB2

INPUT

(mD-sub)

To display

(analog RGB)

output

terminal

RGB1

INPUT

(DVI-D)

To display

(digital RGB)

output

terminal

RS-232C

To RS-232C

output

terminal

S-VIDEO

To S-video

output

terminal

INPUT

To video

output

terminal

VIDEO INPUT

To sound

output

terminal

AUDIO1

INPUT

To sound

terminal

AUDIO2

INPUT

output

AUDIO3

INPUT

To sound

output

terminal

EXT

speaker

E-15

BASIC OPERATIONS

TURNING ON THE POWER

Select the OFF/STD-BY switch

at the STD-BY

When you do so, the power indicator lamp turns red.

(This applies only to 50”display.)

Press on the remote control.

When you do so, the power indicator lamp turns green.

Press or to select a desired input mode.

of the display.

* You can also use the

switches on the display’s control panel to accomplish these steps.

TURNING OFF THE POWER

Press when the power is ON.

The power indicator lamp turns red.

ADJUSTING THE VOLUME

Press to increase the volume.

Press Any value between 0 and 40 can be selected.

* “No Audio” appears if you press

selected “No Audio” for “Audio Input”. (See P. E-37.)

* Note that the volume level remains stored even when you

turn OFF the power.

to reduce the volume.

or after you have

When the volume adjustment button is pressed

E-16

SELECTING INPUT MODE

VIDEO INPUT MODE

English

Press to select a desired input mode.

Each time you press , a different input mode appears. The sequence is as follows:

* You can also use the

switches on the display’s control panel to accomplish these steps.

RGB INPUT MODE

Video: Displays pictures from equipment

connected to the Video terminal.

S-video: Displays pictures from equipment

connected to the S-video terminal.

Comp.video

* When RGB-PC is selected in BNC Input mode,

Comp. video mode can not be input. (See P.E-35.)

: Displays pictures from equipment

connected to the component video input terminal.

Press to select a desired input mode.

Each time you press , a different input mode appears. The sequence is as follows:

S-video mode

Comp.video mode

* You can also use the

switches on the display’s control panel to accomplish these steps.

RGB1:Displays pictures from equipment

connected to the RGB1 (DVI-D) terminal.

RGB2:Displays pictures from equipment

connected to the RGB2 (mD-sub) terminal.

RGB3:Displays pictures from equipment

connected to the RGB3 (BNC x5) terminal.

* When Comp. video is selected in BNC Input

mode, RGB3 mode can not be input. (See P. E-35)

RGB1 mode

RGB2 mode

E-17

WATCHING PICTURES ON THE WIDE SCREEN

SWITCHING BETWEEN SCREEN SIZES

* You can also use the

switches on the display’s control panel to accomplish these steps.

1 2

Press .

The currently selected mode will appear.

Press to select a desired picture mode.

Each time you press , a different picture mode appears. The sequences used are as follows:

When you are in a Video or S-video input mode

When you are in a Comp.video input mode

When you are in an RGB input mode

* Depending on the type of signal, some aspects

may not be selected.

Normal mode

Wide1 mode

Note

• Displaying a picture in a Normal mode for extended periods of time may cause phosphor burn-in.

• A variety of picture modes are available with this display. Remember that if you select a mode with an aspect ratio (ratio of frame width to frame

height) different from that of the TV program or video media, the pictures will appear differently than if you had selected a mode having the same aspect ratio.

• Showing a movie or similar premium event at a different aspect ratio from its original one at any event site, restaurant, or bar for profit-making

purposes or for a public audience may constitute a copyright infringement. For films, try to select a mode having the same aspect ratio as the original picture; this enables the director’s original intentions to be preserved.

Reference

See P. E-28–E-29 for how to adjust the picture size and position.

E-18

SCREEN SIZE

Normal

Displays pictures of normal size (i.e., a 4:3 aspect ratio).

Auto

The screen size changes automatically in accordance with the contents of image software you use.

Wide1

Displays natural-looking pictures of standard size on the wide screen.

Wide2/Wide

Ideal for displaying vertically extended pictures such as squeezed pictures and recorded HDTV programs.

Zoom1/Zoom

Enlarges horizontally extended pictures equally in all directions to maintain the aspect ratio constant.

Zoom2

Reduces the height of horizontally extended pictures with captions, without eliminating the caption. Only the height of pictures is reduced, not the height of the caption.

(Captions may not be easy to read, however, depending on the picture.)

Picture of

standard size

Vertically

extended picture

Horizontally

extended picture

Horizontally extended

picture with caption

English

Wide1

Wide2

Zoom1

Zoom2

ASPECT RATIO

The following aspect ratios are available. 4:3 aspect ratio

(VHF/UHF broadcasting, BS broadcasting)

1.85:1 aspect ratio (Vista V ision size)

Information

You may find dark areas on top and at the bottom of the screen if you select one of the Zoom modes for media while using the Vista Vision or Cinema Vision size i.e., the sizes used frequently for picture software.

1.85

16:9 aspect ratio (HDTV broadcasting)

2.35:1 aspect ratio (Cinema Vision size)

2.35

E-19

HOW TO USE MENUS

SELECTING OPTIONS IN A MENU

Use the [MODE] button on the display or and on the remote control to select a desired input mode.

1 2

A total of five different menus (PICTURE, POSITION/SIZE, AUDIO, FEATURES, FACTORY DEFAULT) are available. You can easily distinguish between these menus as shown below.

Press .

The main menu screen will appear.

Press or to switch between sub-menus.

Each time you press or , one of the available menus appears. The corresponding menu screen will appear.

Press or to select an option for adjustment/setup.

PICTURE AUDIO FEATURES FACTORY DEFAULTPOSITION/SIZE

Ex.: “PICTURE” selected in the main menu screen

*Press , , or to make adjustment/setup, and press to store. * Do not change input signals when any of the menus are displayed. * Audio Input menu will not be displayed when "No Audio" is selected. (See P. E-37.)

USING THE PICTURE MENU

When you finish selecting a desired option in the PICTURE menu screen, press . At this time, the adjustment/setup screen for that option will appear. You can use Changes you make will be stored only for the selected mode.

PICTURE Menu screen (Video Input Mode) PICTURE Menu screen (RGB Input Mode)

or to change the value for the option. Press to store. (See P. E-26–E-27.)

E-20

Option

(1) Contrast

(2) Brightness

(3) Color

(4) Tint

(5) Sharpness

(6) Picture Mode

(7) Color Temp. (8) User Color Temp.

(9) Noise Reduction

(for Video, S-video, Comp.video)

Function

Adjusts picture contrast.

Adjusts screen brightness.

Adjusts color darkness.

Adjusts tint.

Adjusts picture sharpness.

Can set up the picture mode.

Adjusts color temperature. Can set up when User is

selected in Color Temp.

Sets up noise reduction.

USING THE POSITION/SIZE MENU

Operation

: Higher contrast : Lower contrast

: Brighter screen : Darker screen

: Darker colors : Lighter colors

: More greenish tint : More purplish tint

: Sharper pictures : Less sharp pictures

Use or for switching.

Use or for switching. Press

Green or Blue and press to make adjustment.

Use or for switching.

or to select Red,

Range/Setting

-30 to +30

English

-60 to +60

Video, S-video: -30 to +30 Comp.video, RGB-Video, RGBPC, Decoder : -60 to +60

Video, S-video, Comp.video, RGB-Video, Decoder :-16 to +16 RGB-PC : -4 to +4

Dynamic/Fine/Real1/Real2/ Static

Warm/Standard/Cool/User 0 to 255 for each of Red,

Green and Blue

Off/Min./Std./Max.

When you finish selecting a desired option in the POSITION/SIZE menu screen, press When you do so, the adjustment screen for that option appears. Press or to select option and press or to make adjustment. Press to store. (See P. E-28–E-29.) Changes you make will be stored only for the selected mode.

*You cannot adjust screen size in RGB1 (DVI-D) mode.

POSITION/SIZE Menu screen “Position” adjustment screen

Option

(1) Position

Horizontal

(2) Size

Width

Height

Function

Adjusts screen position. Adjusts horizontal position.

Adjusts vertical position.Vertical

Adjusts screen size. Adjusts width.

Adjusts height.

Operation Range/Setting

: Moves screen to the right. : Moves screen to the left.

: Moves screen up. : Moves screen down.

: Increases width.

: Reduces width. : Increases height.

: Reduces height.

Video, S-video

Horizontal: -30 to +30 Vertical Zoom: -15 to +15

Comp.video: -16 to +16

1080I,720P: -32 to +32 RGB-PC: -150 to + 150 RGB-Video, Decoder: -16 to + 16

1080I,720P: -32 to +32 Video, S-video: -7 to +7

Comp.video: -4 to +4 RGB-PC: -25 to +50 RGB-Video, Decoder: -4 to +4

Others:-7 to +7

E-21

HOW TO USE MENUS (Continued)

USING THE AUDIO MENU

When you finish selecting a desired option in the AUDIO menu screen, press . When you do so, the adjustment screen for that option appears. Press or to select option and press or to make adjustment. Press to store. (See P. E-30–E-31.) The adjustments you make will be stored for each audio input terminal.

*Audio Input menu will not be displayed when "No Audio" is selected. (See P. E-37.)

AUDIO Menu screen

Option

(1) Treble

(2) Bass

(3) Balance

(4) Loudness

Function

Adjusts treble.

Adjusts bass.

Adjusts volume balance.

Adjusts loudness.

Operation

: Stronger treble : W eaker treble

: Stronger bass : W eaker bass

:Higher volume from right-

hand speaker

:Higher volume from left-

hand speaker

Use

or for switching.

Range/Setting

-6 to +6

-10 to +10

On /Off (disabled)

USING THE FEATURES MENUS

• FEATURES setup screen has 5 options of Adjustment, Function, On Screen Menu, Input Terminal and Others.

• Options with “ ” on the right

When you select an option with “ ”, press . The adjustment/setup screen for that option appears.(See P. E-32–E-40.) You can use or on this screen to make selections or changes.Press to store.

• Options with no “ ” on the right

When you select an option with no “ ”, press or to make selections or changes. Press to store. (See P. E-32–E-40.)

FEATURES Menu

FEATURES Menu screen (Comp.video Input Mode)

E-22

Adjustment Menu screen Function Menu screen

English

On Screen Menu screen

Input Terminal Menu screen

Adjustment Menu (See P. E-32–E-33.)

Option

(1) Dot Clock (for RGB2, RGB3)

(2) Clock Phase (for RGB2, RGB3)

(3) V ertical Sync (for RGB2, RGB3)

(4) Clamp Position (for Comp.video, RGB2, RGB3)

(5)Auto Calibration (for RGB2, RGB3)

Function

Adjusts the dot clock.

Adjusts clock phase.

Corrects vertical synchronization signal.

Adjusts clamp pulse phase.

Selects the optimum dynamic range of images.

Function Menu(See P. E-32, E-34.)

Option

(1) 24 Frame Mode (for Video, S-video, Comp.video)

(2) 3D Y/C (for Video(3.58NTSC))

Function

Displays the optimum movie pictures.

Selects whether to enable the 3D Y/C circuit.

Others(1/2) Menu screen

Operation

Eliminates blur when the optimum value is selected with

or .

Eliminates blur when the optimum value is selected with

or .

Use

or to select the optimum value for eliminating flicker.

Use

or for switching.

Select Execute and use or to select an option.

Operation

Use

or for switching.

Use or for switching.

Range/Setting

-60 to +60

Auto/Manual (Can adjust 1 to 32 for

Manual)

-1 to +1

-8 to +8

Execute Yes/No

Range/Setting

On (Movie) / Off (Normal)

On (3D Y/C circuit) / Off (3-line)

On Screen Menu(See P. E-32, E-34)

Option

(1) OSD

(2) Language

Function

Selects whether to display information other than menus.

Selects language used for menus.

Operation

Use

or for switching.

Display the “Language” selection screen and use

to select a language.

Range/Setting

On (displayed) / Off (not displayed)

English

Deutsch (German) Español (Spanish) Français (French) Italiano (Italian) Português (Portuguese)

E-23

HOW TO USE MENUS (Continued)

Input Terminal Menu(See P. E-32, E-35–E-36.)

Option

(1) Video Input (for Video)

(2) S-video Input (for S-video)

(3) BNC Input

(4) D-SUB Input

Function

Selects video mode.

Selects BNC Input signal.

Selects D-SUB Input signal.

Others Menu(See P. E-32, E-36–E-40.)

Others Menu screen is divided into the following two screens.

Operation

Use

or for switching.

Use or for switching.

Display BNC Input screen and press or to select an option.

or for switching.

Use Select Comp.video, RGB-Video or Decoder by Function to set up Mask.

Display D-SUB Input screen and press option. Use Select Decoder by Function to set up Mask.

or to select an

or for switching.

Range/Setting

Auto/NTSC/PAL/SECAM/ PAL60/N-PAL/M-PAL/

4.43NTSC Auto/NTSC/PAL/SECAM/

PAL60/N-PAL/M-PAL/

4.43NTSC Function

Comp.video/RGB-Video/

RGB-PC/Decoder Mask Off/5/10/15 (dot)

Function RGB-PC/Decoder

Mask Off/5/10/15 (dot)

Others(1/2) Menu screen

Option

(1) Picture Memory

(2) DPMS (for other than RGB1)

(3) Audio Input

Others(2/2) Menu screen

Function

Storing the setting of Picture menu in 8 pattern.

Specifies time before DPMS starts. Can specify the background color when specifying time.

Selects audio input terminal.

Operation

Display Picture Memory screen and press or to select an option.

or to select Memory

Press number.

Display DPMS screen and press

or to select an option.

or for switching.

Use Can specify background by setting time to other than Off.

Display the “Audio Input” adjustment screen and use or

to select an option.

or to switch between

Use available choices for the selected option.

Range/Setting

Memory 1/2/3/4/5/6/7/8

Time

Off (disabled)/1 min./ 15 min./45 min./60 min. Background

Black/White

No Audio /Audio 1 /Audio 2/ Audio 3

E-24

Option

(4) Screen Orbiter (for RGB)

(5) Input Priority

(6) Monitor No.

(7) Direct Setting (for RGB)

(8) Code Setting (for RGB2, RGB3)

(9) White Screen

(10) Exhibition Mode

(11) Installation

(12) Key Lock

(13) Information

Function

Sets up screen orbiter.

Specifies input mode of highest priority.

Selects display number.

Selects input signal.

Specifies and displays type of input signal directly.

Sets up to display white over the entire screen.

Sets up Exhibition mode.

Sets up whether horizontal or vertical installation.

Locks the main unit button.

Displays system operation status.

Operation

Display the “Screen Orbiter” adjustment screen and use or

to select an option. Use or to switch between available choices for the selected option.

Use or for switching.

Display Code Setting screen and press option. Select Manual to set up Parameter.

Use

Use or for switching.

Display the “Information” screen.

or to select an

or for switching.

Range/Setting

Mode/Time

Off (disabled) Time (every 1 hr) Mode (every time mode is

Moving area

Off/RGB2/RGB3/Video/ S-video/Comp.video

0 (no setup)/ 1/2/3/4

RGB1:

RGB2, RGB3:

Auto/Manual

On /Off(disabled)

On (Exhibition mode)/ Off(disabled)

-90 Deg. (counterclockwise)/ Normal/ +90 Deg. (clockwise)

On (Key Lock)/ Off(disabled)

Display only

switched)

Min.(moves in small range) Std.(moves in moderate

range)

Max. (moves in wide range)

Auto/VGA/WVGA/XGA/ WXGA

Auto/VGA/WVGA/480P/ XGA/WXGA/SXGA/

SXGA

English

USING THE FACTORY DEFAULT MENU

• Select FACTORY DEFAULT and execute to restore the adjustment/setting made in the MENU to factory settings. (See P. E-41.)

FACTORY DEFAULT Menu screen

Option

FACTORY DEFAULT

Function

Restores the adjustment/ setting made in the MENU to factory settings.

Yes/No selection screen

Operation

Select Execute and use to select an option.

Range/Setting

Yes/No

E-25

ADJUSTING PICTURES (PICTURE MENU)

BASIC OPERATIONS [EX.: ADJUSTING TINT (Tint)]

You can make changes to all picture adjustment options in the PICTURE Menu. The changes you make will be stored for a selected input mode. Therefore, you need to select a desired input mode before making any

changes.

* You can also use the

switches on the display’s control panel to accomplish these steps.

3 4

Press .

The main menu screen will appear.

Press or to select “PICTURE”.

Each time you press or , one of the available menus appears in the following sequence:

PICTURE POSITION/SIZE AUDIO FEATURES FACTORY DEFAULT

The PICTURE Menu screen will appear.

Press or to select “Tint”.

Press

The “Tint” adjustment screen will appear.

“PICTURE” selected in the main menu screen

“Tint” selected in the PICTURE Menu screen (Video Input Mode)

* On-screen information disappears if you do not take any action for about 60 seconds. * The following abbreviations used in this document represent input modes in which you can make adjustments:

: Video mode, : S-video mode, : Comp.video mode, : RGB mode

Press or to change tint values.

: More greenish tint : More purplish tint

Press to store.

Press

* Repeat steps 3, 4, 5, and 6 when you wish to

make changes to other options.

when you finish.

E-26

“Tint” adjustment screen

• Adjusting Contrast (Contrast)

Any value between -30 and +30 can be selected.

: Higher contrast : Lower contrast

Press to store.

• Adjusting Screen Brightness (Brightness)

Any value between -60 and +60 can be selected.

: Brighter screen : Darker screen

Press to store.

• Adjusting Color Darkness (Color)

Any value between -60 and +60 can be selected.

: Darker colors : Lighter colors

Press to store.

• Adjusting Tint (Tint)

Any value between -30 and +30 for [ ], and -60 and +60 for [ ] can be selected.

: More greenish tint : More purplish tint

Press to store.

• Adjusting picture Sharpness (Sharpness)

Any value between -16 and +16 for [ (RGB-Video,Decoder)], and -4 and +4 for [ (RGB-PC)], can be selected.

: Sharper pictures : Less sharp pictures

Press to store.

• Setting Picture Mode (Picture Mode)

Can set up the picture mode. Each time you press or , one of the available choices appears in the following sequence:

English

Dinamic:Suitable for watching a normal motion picture.(Standard) Fine: Suitable for watching a dark picture such as movie. Real 1: Makes a strong contrast picture. Real 2: Makes a bright color picture. Static: Suitable for watching a still picture.

Press to store. *Select Dinamic, Fine, Real 1, Real 2 or Static to suit your taste.

• Adjusting Color Temperature (Color Temp.)

Use or to specify a desired color temperature. Each time you press or , one of the available choices appears in the following sequence:

Warm: More reddish colors Standard:Standard color temperature Cool: More bluish colors User: User Color Temp. setup

Press to store.

• Setting User Color Temp. (User Color Temp.)

Can set up when User is selected in Color Temp. Press or to select Red, Green or Blue and press or to make adjustment in the range of 0 to 255. Press to store. * Color Temp. setup is switched to User. The initial value of User Color Temp. is adjusted

individually at the factory.

• Setting Noise Reduction (Noise Reduction)

Can select the noise reduction setting corresponding to the noise level of the input signal. Each time you press or ,one of the available choices appears in the following sequence:

User Color Temp.adjustment screen

Off: Noise reduction does not function. Min.: Weak noise reduction setting. Std.: Standard noise reduction setting. Max.: Strong noise reduction setting.

Press to store. *Some type of signal can not be selected.

E-27

ADJUSTING SCREEN POSITION AND SIZE (POSITION/SIZE MENU)

BASIC OPERATION [EX.: ADJUSTING HORIZONTAL DIRECTION OF SCREEN POSITION

You can make changes to all screen adjustment options in the POSITION/SIZE Menu. The changes you make will be stored for the selected input mode. Therefore, you need to select a desired input mode before making any

changes.

1 2

Press .

The main menu screen will appear.

Press or to select “POSITION/SIZE”.

Each time you press or , one of the available menus appears in the following sequence:

PICTURE POSITION/SIZE AUDIO FEATURES FACTORY DEFAULT

The POSITION/SIZE Menu screen will appear.

Press or to select “Position”.

“POSITION/SIZE” selected from the main menu screen

]

* You can also use the

switches on the display’s control panel to accomplish these steps.

5 6

Press

The “Position” adjustment screen will appear.

Press or to select “Horizontal” values of screen position.

Press

The “Horizontal” adjustment screen will appear.

Press or to change horizontal values.

: Moves screen to the right. : Moves screen to the left.

Press to store.

“Position” adjustment screen

E-28

Press

* Repeat steps 3 to 8 when you wish to make

changes to other options.

when you finish.

Adjusting Screen Position (Position)

Horizontal position (Horizontal)

: Moves screen to the right.

→

English

: Moves screen to the left.

Vertical position (Vertical)

: Moves screen up.

: Moves screen down.

Press to store.

Adjusting Screen Size (Size)

Screen width (Width)

: Increases width.

: Reduces width.

Screen height (Height)

: Increases height.

: Reduces height.

→

“Position” adjustment screen

→

“Size” adjustment screen

→

Press to store. *You cannot adjust screen size in RGB1 (DVI-D) mode.

Setting Range

Video, S-video mode

Position

Size

* On-screen information disappears if you do not take any action for about 60 seconds. * The following abbreviations used in this document represent input modes in which you can make adjustments:

: Video mode, : S-video mode, : Comp.video mode, : RGB mode

Horizontal: -30 to +30 Vertical

Zoom: -15 to +15 Others: -7 to +7

-7 to +7

Comp.video mode

-16 to +16

-32 to +32 (for1080I,720P)

-4 to +4

RGB mode

RGB-PC: -150 to +150 RGB-Video, Decoder: -16 to +16

-32 to +32 (for1080I,720P)

RGB-PC: -25 to +50 RGB-Video, Decoder: -4 to +4

E-29

ADJUSTING AUDIO (AUDIO MENU)

BASIC OPERATION [EX.: ADJUSTING VOLUME BALANCE (Balance)]

You can make changes to all sound adjustment options in the AUDIO Menu. The changes you make will be stored for the selected input mode. Therefore, you need to select a desired input mode before making any

changes.

Press .

The main menu screen will appear.

Press or to select “AUDIO”.

Each time you press or , one of the available menus appears in the following sequence:

PICTURE POSITION/SIZE AUDIO FEATURES FACTORY DEFAULT

The AUDIO Menu screen will appear.

“AUDIO” selected in the main menu screen

* You can also use the

switches on the display’s control panel to accomplish these steps.

3 4

Press or to select “Balance”.

Press

The “Balance” adjustment screen will appear.

Press or to adjust the balance.

: Higher volume from the right-hand speaker : Higher volume from the left-hand speaker

Press to store.

Press

* Repeat steps 3 to 6 when you wish to make

changes to other options.

* Audio Input menu will not be displayed when

“No Audio” is selected. (See P. E-37.)

when you finish.

“Balance” selected in the AUDIO Menu screen

E-30

Adjusting Treble (Treble) Each audio input

Any value between -6 and +6 can be selected.

: Stronger treble : Weaker treble

Adjusting Bass (Bass) Each audio input

Any value between -6 and +6 can be selected.

: Stronger bass : Weaker bass

Adjusting Volume Balance (Balance) Each audio input

Any value between -10 and +10 can be selected.

: Higher volume from the right-hand speaker : Higher volume from the left-hand speaker

Setting Loudness (Loudness) Each audio input

Corrects the balance between bass and treble for easy listening even with weak volume. Each time you press

sequence:

On : Corrects bass and treble. Off : Loudness dose not function.

Off

or , one of the available choices appears in the following

English

“Treble” selected in the AUDIO Menu screen

"Loudness" selection screen

* On-screen information disappears if you do not take any action for about 60 seconds. * The following abbreviations used in this document represent input modes in which you can make adjustments:

: Video mode, : S-video mode, : Comp.video mode, : RGB mode

E-31

OTHER ADJUSTMENTS (FEATURES MENU)

BASIC OPERATION [EX.: SELECTING LANGUAGE (Language)]

You can make the following changes in the FEATURES Menu.

* You can also use the

switches on the display’s control panel to accomplish these steps.

1 2

Press .

The main menu screen will appear.

Press or to select “FEATURES”.

Each time you press or , one of the available menus appears in the following sequence:

PICTURE POSITION/SIZE AUDIO FEATURES FACTORY DEFAULT

The FEATURES Menu screen will appear.

Press or to select "On Screen Menu".

• Select a desired option for adjustment/setup from Adjustment, Function, On Screen Menu, Input Terminal and Others.

Press .

• On Screen Menu appears.

“FEATURES” selected in the main menu screen

On Screen Menu screen

5 6

7 8

Press or to select “Language”.

Press

The “Language” selection screen will appear.

Press or to select the language.

Press

The menu is displayed in the selected language.

Press when you finish.

* Repeat steps 3 to 8 when you wish to make changes

to other options.

“Language” selection screen

E-32

• FEATURES setup screen has the following 5 options.

Adjustment : Can make a fine adjustment of pictures such as Dot Clock, Clamp Position. Function : Can make a function setting such as 24 Frame Mode, 3D Y/C. (See P. E-34.) On Screen Menu : Can make a display setting such as OSD, Language. (See P. E-34.) Input Terminal : Can make an input terminal setting such as Video Input. (See P. E-35–E-36.) Others : Can make other settings. (See P. E-36–E-40.)

ADJUSTMENT

• Adjusting Dot Clock (Dot Clock)

You may find that pictures blur, depending on the clock frequency of your PC’s processor. If you experience blurring, you can obtain a clearer picture by adjusting the “Dot Clock”. Use or to select a value between -60 and +60. Press to store.

• Adjusting Clock Phase (Clock Phase)

You may find that pictures blur, depending on the clock phase of your PC’s processor. If you experience blurring, you can obtain a clearer picture by adjusting the “Clock Phase”.

Use or to select "Auto" or "Manual".

Auto: Makes automatic adjustment. Manual: Makes manual adjustment.

Use or to specify a value between 1 and 32.

Press to store.

English

When selecting Manual by Clock Phase

• Eliminating Flicker (Vertical Sync)

Corrects the vertical synchronization signal timing to eliminate vertical flicker. Use or to specify a value between -1 and +1. Press to store. *Some type of signal can not be selected.

• Adjusting Clamp Position (Clamp Position)

Adjusts clamp pulse in accordance with the input signal received from connected equipment. Use or to specify a value between -8 and 8. Press to store.

• Selecting the Optimum Dynamic Range of Images (Auto Calibration)

Receives a white screen signal and adjusts the dynamic range of images to the optimum. (1) Select Auto Calibration and press .

Auto Calibration screen appears.

(2) Select Execute and press .

Press or to select Yes or No. Yes: Stores the data of Auto Calibration. No: Disables the execution result of Auto Calibration.

(3) Press to execute.

"Auto Calibration" setting screen

"Yes/No" screen to select

* On-screen information disappears if you do not take any action for about 60 seconds. * The following abbreviations used in this document represent input modes in which you can make adjustments:

: Video mode, : S-video mode, : Comp.video mode, : RGB mode

E-33

OTHER ADJUSTMENTS (FEATURES MENU)

FUNCTION

• Displaying the optimum movie pictures (24 Frame Mode)

Can make the optimum display of 24 frames/second signals such as movie pictures. Each time you press or , one of the available choices appears in the following sequence:

On Off

On : Displays the optimum movie pictures. Off : Displays normal pictures.

Press to store. *Some type of signal can not be selected.

• Setting 3D Y/C Circuit (3D Y/C)

Clear and distinct pictures can be displayed without color blotting. Each time you press or , one of the available choices appears in the following sequence:

On Off

On : Set to On normally. Enables the 3D Y/C circuit.

You can make this selection only for NTSC signal.

Off : The 3D Y/C circuit can not be used. Set to Off when the moving pictures look unnatural.

Press to store. * Can be set only when receiving NTSC signal.

Set to On normally. Set to Off when the moving pictures look unnatural.

(Continued)

ON SCREEN MENU

• Setting Display Information (OSD) All modes

You can use this option to select whether to display information other than menus. (Error messages are displayed regardless of what choice you make for this option.)

Each time you press , one of the available choices appears in the following sequence:

On Off

On : Displays all information. Off : Displays only menus and error messages.

Press to store.

• Selecting Language (Language) All modes

You can use this option to select the language displayed on the screen. (1) Select “Language” and press .

The “Language” selection screen will appear.

(2) Press or to select your desired language.

English Deutsch (German) Español (Spanish) Français (French) Italiano (Italian) Português (Portuguese)

(3) Press .

The menu is displayed in the selected language.

"Language" selection screen

E-34

INPUT TERMINAL

• Selecting Video Mode (Video Input)

You can use this option to select the desired video mode of pictures it will receive to the Video Input terminal.

Each time you press or , one of the available modes appears in the following sequence:

Auto: Automatically selects NTSC, PAL and SECAM. Other than Auto: You need to select a system appropriate to the input signal.

Press to store.

• Selecting Video Mode (S-video Input)

You can use this option to select the desired video mode of pictures it will receive to S-video Input terminal.

Each time you press or , one of the available modes appears in the following sequence:

Auto: Automatically selects NTSC, PAL and SECAM. Other than Auto: You need to select a system appropriate to the input signal.

Press to store.

• Selecting BNC Input (BNC-Input) All modes

You can use this option to select the signal system it will receive to BNC Input terminal. (1) Select BNC Input and press .

BNC Input screen appears. (2) Select the signal system to receive. Each time you press or , one of the available choices appears in the following sequence:

English

Comp.video: For using color difference input. RGB-Video: For using 0.3V input of sync. signal level with RGB signal input.

(RGB-Video is used only for 61" type.) RGB-PC: For using PC wih RGB signal input. Decoder: For using decoder with RGB signal input.

(3) Press or to select Mask. (4) Select Comp.video, RGB-Video or Decoder by FUNCTION to set up Mask.

"BNC-Input" selection screen

23456789012345678901234567890

Each time you press or , one of the available choices appears in the following sequence:

Off: Does not mask. Number:

Masks the fringe (top, bottom, right and left) of the screen by the number of pixels specified.

(5) Press to store.

* On-screen information disappears if you do not take any action for about 60 seconds. * The following abbreviations used in this document represent input modes in which you can make adjustments:

: Video mode, : S-video mode, : Comp.video mode, : RGB mode

This fringe part is masked.

E-35

OTHER ADJUSTMENTS (FEATURES MENU)(Continued)

INPUT TERMINAL

• Selecting D-SUB Input (D-SUB Input) All modes

You can use this option to select the signal system it will receive to D-SUB Input terminal. (1) Select D-SUB Input and press .

D-SUB Input screen appears.

(2) Select the signal system to receive.

Each time you press or , one of the available choices appears in the following sequence:

RGB-PC Decoder

RGB-PC: For using RGB for PC

Decoder: For using digital broadcast tuner (3) Press or to select Mask. (4) Select Decoder by FUNCTION to set up Mask.

Each time you press or , one of the available choices appears in the following sequence:

Off: Does not mask.

Number: Masks the fringe (top, bottom, right and left) of the screen by the number of pixels

specified.

(5) Press to store.

"D-SUB Input" selection screen

23456789012345678901234567890

This fringe part is masked.

OTHERS MENU

• Storing the setting of PICTURE (Picture Memry) All modes

Stores 8 patterns of adjustments set by PICTURE. Read out and store to suit your taste.

In case of "Load"

When setting "Load": Read out your desired Setting. (1) Select “Picture Memory” and press .

The “Picture Memory” screen will appear. (2) Press or to select Load. (3) Select Data number to make Load. (4) Press to read out.

In case of "Save"

When setting "Save": Set to suit your taste and store. (1) Select “Picture Memory” and press .

The “Picture Memory” screen will appear. (2) Press or to select Save. (3) Select Data number to make Save. (4) Press to save.

"Picture Memory" selection screen

"Load" selection screen

E-36

• Selecting time before DPMS starts (DPMS) All modes

You can use this option to select the amount of time before the DPMS function starts. DPMS (which stands for “display power management signaling”) allows the display to maintain an

automatic power saving function. This function causes on-screen information to disappear until the next input operation, if the power

is ON and the display has not received any signals for the predetermined period of time. When DPMS is active, the power indicator lamp turns orange.

(1) Select DPMS and press .

DPMS screen appears. (2) Press or to select Time. (3) Each time you press or , one of the available choices appears in the following sequence:

Off: Disables DPMS

Number: Approximate time before DPMS starts. (Unit: minutes) * The power indicator lamp turns orange while the DPMS is ON. * The power turns ON automatically when the display receives a signal. (4) Can specify background color.

Press or to select background color.

Each time you press or , one of the available choices appears in the following sequence:

Black White

Black: Mutes images in Black background.

White:Mutes images in White background. * Switches approx. 20 seconds after the display stops receiving signals. (5) Press to store. * DPMS does not function in RGB1 mode.

English

DPMS selection screen

• Selecting input terminals (Audio Input) All modes

You can use this option to select one of the three available terminals to receive sound from input equipment.

(1) Select “Audio Input” and press .

The “Audio Input” selection screen will appear. (2) Press or to select input equipment. (3) Select a desired input terminal.

Each time you press or , one of the available choices appears in the following sequence:

No audio: No sound in the corresponding mode.

Audio 1-3: Selects Audio 1 through 3 for receiving sound in the corresponding mode.

* Repeat steps (2) and (3) for each piece of input equipment. (4) Press to store.

*Audio Input menu will not be displayed when "No Audio"is selected.

“Audio Input” selection screen

* On-screen information disappears if you do not take any action for about 60 seconds. * The following abbreviations used in this document represent input modes in which you can make adjustments:

: Video mode, : S-video mode, : Comp.video mode, : RGB mode

E-37

OTHER ADJUSTMENTS (FEATURES MENU)(Continued)

• Minimizing phosphor burn-in (Screen Orbiter)

You can use this option to move the screen position to minimize phosphor-induced “burn-in”. Follow the steps below. (1) Select “Screen Orbiter” and press .

The “Screen Orbiter” setting screen will appear. (2)Press or to select “Mode/Time”. (3)Select a desired pattern.

Each time you press or , one of the available choices appears in the following sequence:

Off: Disables Screen Orbiter.

Time: Moves the pattern approximately every one hour.

Mode: Moves the pattern when the power is turned ON or when you switch between modes. (4)Press or to select “Moving Area”. (5) Press or to select the range for moving the pattern.

Each time you press or , one of the available choices appears in the following sequence:

“Screen Orbiter” setting screen

Min.: Pattern moves in small range. (About 5 pixels)

Std.: Pattern moves in moderate range. (About 10 pixels)

Max.: Pattern moves in wide range. (About 15 pixels) (6) Press to store.

*When the Screen Orbiter function is operated in RGB1 mode, some letters at the top, bottom,

right or left of the screen may be missed.

Using screen protection functions (examples)

The screen protection functions minimize phosphor burn-in but cannot completely eliminate it.

When using the display occasionally

• Select a desired amount of time for “DPMS”. Thus, when the display does not receive a signal, it will automatically display white or black over the entire screen. When the predetermined time elapses, the power will turn OFF.

• Input mode of priority (Input Priority) All modes

You can use this option to switch between modes only when a signal is received through the selected input mode terminal. You cannot switch the input mode.

Each time you press or , one of the available choices appears in the following sequence:

When using the display continuously When switching between RGB and video input modes only

occasionally

(1) Select “Time” for “Mode/Time” with “Screen Orbiter”. (2) Select a desired range for “Moving Area” with “Screen Orbiter”.

This causes the screen saver pattern to move in the same range at regular intervals.

When switching between RGB and video input modes frequently

(1) Select “Mode” for “Mode/Time” with “Screen Orbiter”. (2) Select a desired range for “Moving Area” with “Screen Orbiter”.

When the mode is switched from Video to RGB, the display position moves.

Off: Switches between modes normally.

Other modes: Displays pictures when a signal is received through the selected input mode

terminal. Press to store. *RGB1 mode cannot be selected.

E-38

• Assigning Numbers to Displays (Monitor No.) All modes

When you use two or more displays, you can use a single remote control to control individual displays by assigning a unique number to each of the displays.

Each time you press or , one of the available numbers appears in the following sequence:

0: You can normally control displays.

You cannot control displays if you press any of [SHIFT 1] through [SHIFT 4].

1–4: Allows you to control a desired display by pressing the corresponding button (one of

[SHIFT 1] through [SHIFT 4]). When you do not press any of the SHIFT buttons, you can control all displays. Press to store. * You can check the “Monitor No.” on the Information screen. (See P. E-40.)

• Setting RGB Input Signal Compulsorily (Direct Setting)

You can use this option to switch the setting for RGB input signal. Each time you press or , one of the available choices appears in the following sequence: For RGB1 mode:

For RGB2.3 mode:

Auto: The optimum display is obtained automatically for input signals. Others: The optimum resolution setting is fixed for each signal.

Press to store. * In Auto mode, the resolution of VGA, WVGA, 480P, XGA, WXGA, SXGA and SXGA+ may

not be automatically distinguished. Switch to the fixed display when the image is not displayed properly.

English

• Specifying RGB Input Signal (Code Setting)

You can use this option to specify and display the type of RGB input signal by code number. Each time you press or , one of the available choices appears in the following sequence:

Auto Manual

Auto: Automatically displays the input signal to the optimum.

Manual: Selects RGB code number. Press to store. * In Auto mode, the optimum resolution may not be set up automatically depending on the type of

signal.

Select the type of signal when the image is not displayed properly. However, note that when the type of signal is selected directly, the signal of other resolution

may not be displayed properly.

"Code Setting" setting screen

• Displaying white over entire screen (White Screen) All modes

You can use this option to display white over the entire screen to minimize phosphor burn-in. Each time you press or , one of the available choices appears in the following sequence:

On Off

Off: Does not display white.

On: Displays a white screen immediately. Press to store.

* On-screen information disappears if you do not take any action for about 60 seconds. * The following abbreviations used in this document represent input modes in which you can make adjustments:

: Video mode, : S-video mode, : Comp.video mode, : RGB mode

E-39

OTHER ADJUSTMENTS (FEATURES MENU)(Continued)

• Setting Exhibition Mode (Exhibition Mode) All modes

You can use this option to display the enhanced contrast, which is most suitable for the use by unspecified persons.

Each time you press or , one of the available choices appears in the following sequence:

On Off

On: Sets up Exhibition mode.

Off: Sets up normal mode. Press to store. * In Exhibition mode, the display returns to the original setting in about 5 minutes even if the

adjustment is changed.

* The setup will be cancelled when removing the power plug from the receptacle.

• Horizontal/Vertical installation (Installation) All modes

You can use this option to setup the number of fan rotation and the direction of display text of menu or other screen for horizontal and vertical installation.

Each time you press or , one of the available choices appears in the following sequence:

-90 Deg. : Normal : Displays text normally. +90 Deg. : Press to store. * Be sure to make this setup when changing the direction of installation.

Displays text from left to right when the display is installed with the power indicator lamp at the top.

Displays text from left to right when the display is installed with the power indicator lamp at the bottom.

• Locking Main Unit Button (Key Lock) All modes

You can use this option to disable the main unit button. Each time you press or , one of the available choices appears in the following sequence:

On Off

On: Disables the main unit button.

Off: Enables the main unit button. Press to store.

• Displaying System Status (Information)

Displays system operation status. Select “Information” and press . The “Information” screen will appear.

Mode: Input mode

Monitor No.: Monitor number

Freq. Scan Mode: Frequency scanning

Input Signal: Video mode

Input Sync.: Signal type

Freq.: Frequency and polarity (fH, fV)

Preset No.: RGB code number

Information screen (Video Input Mode)

* On-screen information disappears if you do not take any action for about 60 seconds. * The following abbreviations used in this document represent input modes in which you can make adjustments:

: Video mode, : S-video mode, : Comp.video mode, : RGB mode

E-40

Information screen (RGB2 Input Mode)

INITIALIZATION OF USER ADJUSTMENT VALUE(FACTORY DEFAULT)

You can restore the values of the adjustment/setting made in the MENU to factory settings.

1 2

Press .

The main menu screen will appear.

Press or to select “FACTORY DEFAULT”.

Each time you press or , one of the available menus appears in the following sequence:

PICTURE POSITION/SIZE AUDIO FEATURES FACTORY DEFAULT

The FEATURES Menu screen will appear.

“FACTORY DEFAULT” selected in the main menu screen

English

* You can also use the

switches on the display’s control panel to accomplish these steps.

Press .

• Displays the message of whether to proceed with the initialization.

Press or to select the Yes.

Press

• The message of having completed the initialization will be displayed after initializing.

Press when you finish.

Displays the message of whether to proceed the initialization

Displays the message of having completed the initialization

E-41

OPTIONS

Wall-mounting unit Horizontal: 0° to 15° mounting angle P-50WB01 (for horizontal) (both 50" and 61")

Hanging unit 0° to 15° mounting angle (variable) P-50CT01 (for horizontal) (both 50" and 61")

Stand P-50TT01 (for horizontal) (both 50" and 61")

The pipe is not supplied with the ceiling-hanging unit, so consult your produce dealer.

Speaker P-50SP01 (for 50”)

P-61SP01 (for 61”) (1 set of 2 speakers)

Speaker Stand P-50ST01 (for 50”)

(1 set of 2 speakers stands)

* When installing an option, make sure that all installation requirements for that option (as given in the relevant instruction manual) are met. * The colors of options do not match the display colors perfectly.

Warning

To prevent injury, fire, and electric shock, arrange for options to be initially installed (or installed at a different location) by your dealer.

CAUTION:This display (PDS5003W/PDS5003U/PDS5004W/PDS5004U/PDS6101W) is for use only with

Fujitsu General Limited’s option (P-50WB01, P-50CT01, P-50TT01). Using this display with other option can cause instability resulting in possible injury.

E-42

FACTORY SETTINGS

This display can store the latest four types of signals for RGB adjustment value. The fifth input signal will replace the adjustment value of the first input signal.

To do this, select a desired signal and follow the instructions in “Adjusting Screen Position and Size” on P. E-28–E-29 to adjust the parameters. When you finish, the settings will be automatically stored. Thus, when the display receives that signal, pictures will be displayed in accordance with the settings you most recently selected.

Main corresponding signals (RGB mode)

English

Display (dots x lines)

640 x 480 31.47 59.94 VGA 640 x 480 37.86 72.81 VGA 72 Hz 640 x 480 37.50 75.00 VGA 75 Hz 640 x 480 43.27 85.01 VGA 85 Hz 720 x 400 31.47 70.09 400 lines 800 x 600 37.88 60.32 SVGA 60 Hz 800 x 600 48.08 72.19 SVGA 72 Hz 800 x 600 46.88 75.00 SVGA 75 Hz 800 x 600 53.67 85.06 SVGA 85 Hz 1024 x 768 48.36 60.00 XGA 60 Hz 1024 x 768 56.48 70.07 XGA 70 Hz 1024 x 768 60.02 75.03 XGA 75 Hz 1280 x 1024 63.98 60.02 SXGA 60 Hz 1280 x 1024 79.98 75.03 SXGA 75 Hz 1600 x 1200 75.00 60.00 UXGA 60 Hz 1600 x 1200 93.75 75.00 UXGA 75 Hz 1600 x 1200 106.25 85.00 UXGA 85 Hz 640 x 480 35.00 66.67 MAC 13RGB 848 x 480 31.02 60.00 852 x 480 31.72 59.97 720 x 485 15.73 59.94 60 fields 720 x 575 15.63 50.00 50 fields 640 x 400 31.50 70.15 NEC 31 kHz

* With some input signals, “Out of range” may appear even when the horizontal and vertical frequencies are within their permissible ranges. Make

sure that the vertical frequency of the input signal is 85 Hz or less for SVGA/ UXGA, 75 Hz or less for XGA/ SXGA.

In the DVI-D mode, the input signal can be restricted partly.

In the Comp.video and Video/S-video modes, the display has been factory-set as follows for different input signals:

Main corresponding signals (Comp.video mode)

Horizontal frequency (kHz) Vertical frequency (Hz)

Main corresponding signals (Video, S-video mode)

Signal

DVI-D

Horizontal

frequency (kHz)

15.73 59.94 SDTV 480I

15.63 50.00 SDTV 576I

31.47 59.94 SDTV 480P

31.25 50.00 SDTV 576P

45.00 60.00 HDTV 720P

37.50 50.00 HDTV 720P

33.75 60.00 HDTV 1080I

28.13 50.00 HDTV 1080I

• With the 1280 x 1024 and 1600 x 1200 modes, pictures of reduced size are displayed on the screen, using size reduction and interpolation. Note also that on-screen information is also displayed in reduced size.

•“Out of range” appears if the display receives a signal whose characteristic does not fall within the display’s permissible range.

• You can check input signals through “Information” on the FEATURES Menu screen. (See P. E-40.)

• All terms (i.e., company and product names) used in this document are trademarks or registered trademarks.

Vertical

frequency (Hz)

Signal

Horizontal

frequency (kHz)

15.73 59.94 NTSC

15.63 50.00 PAL

15.63 50.00 SECAM

15.63 59.52 PAL60

15.63 50.00 N-PAL

15.73 59.95 M-PAL

15.73 59.94 4.43NTSC

Vertical

frequency (Hz)

Signal

E-43

SPECIFICATION

Model

Screen size 50" wide screen:

Aspect ratio 16:9 (wide) Weight 45.0 kg / 99.2 lbs Outer dimensions 121.2 (W) x 72.6 (H) x 9.8 (D) cm

Power supply 220–240 VAC 50/60 Hz (W type)

Current rating 2.7 A (W type) / 5.5A (U type) Screen dimensions 110.6 (W) x 62.2 (H) cm

Number of pixels 1366 (H) x 768 (V) Display modes Video, S-video input: Normal/Auto/Wide1/Wide2/Zoom1/Zoom2

Colors 16.77 million External equipment terminals

Video input terminals Video input 1 BNC terminal 1 Vp-p/75 Ω

– – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – –

Applicable systems NTSC/PAL/SECAM/PAL60/N-PAL/M-PAL/4.43NTSC PC input terminal RGB1 input 1 DVI-D terminal

Sound terminals 2 sound input pin jacks (L/R) (3 lines)

Control terminal 1 RS-232C connector (D-sub 9-pin) External speaker output terminal Effective max. output: 8 W + 8 W (EIAJ), 6 Ω

Operating conditions Temperature: 0 to 40 °C / 32 to 104 °F

Accessories 1 remote control, 2AA batteries, 1 instruction manual, 1 power cable, 2 big ferrite cores,

PDS5003W/PDS5003U/PDS5004W/PDS5004U

110.6 cm (W) x 62.2 cm (H) (126.9 cm diagonal)

43.5 inch (W) x 24.5 inch (H) (50.0 inch diagonal)

47.7 (W) x 28.6 (H) x 3.9 (D) inch

120 VAC 50/60 Hz (U type)

43.5 (W) x 24.5 (H) inch

Component video input: Normal/Wide1/Wide2/Zoom1/Zoom2 RGB: Normal/Wide/Zoom

S-video input 1 S terminal Y: 1 Vp-p/75 Ω

Component video input (color difference input) 3 BNC terminals Y: 1 Vp-p/75 Ω

RGB2 input mD-sub, 3 rows, 15-pin

Picture signal: 0.7 Vp-p/75 Ω Synchronization signal:TTL level

RGB3 input 5 BNC terminals R:0.7 Vp-p/75 Ω

500 mVrms/at least 22kΩ

Humidity: 20 to 80 %

2 small ferrite cores

PDS6101W

61" wide screen:

135.1 cm (W) x 76.0 cm (H) (155.0 cm diagonal)

53.2 inch (W) x 29.9 inch (H) (61.0 inch diagonal) 16:9 (wide)

61.0 kg / 134.5 lbs

145.2 (W) x 86.2 (H) x 11.9 (D) cm

57.1 (W) x 33.9 (H) x 4.7 (D) inch 100–240 VAC 50/60 Hz

7.5 A

135.1 (W) x 76.0 (H) cm

53.2 (W) x 29.9 (H) inch 1365 (H) x 768 (V)

C: 0.286 Vp-p/75 Ω

B/B-Y : 0.7 Vp-p/75 Ω

R/R-Y : 0.7 Vp-p/75 Ω

G:0.7 Vp-p/75 Ω B:0.7 Vp-p/75 Ω H:TTL /ANALOG (75 Ω) V:TTL /ANALOG (75 Ω)

2 sound input pin jacks (L/R) (3 lines) 500 mVrms/at least 22kΩ

Effective max. output: 20 W + 20 W (EIAJ), 4 Ω

• Specifications and external appearance may be change for the sake of improvement.

• is a worldwide trademark of Fujitsu General Limited and is a registered trademark in Japan, the U.S.A. and other countries or areas.

E-44

Regulation---PDS5003W

• EMC:FCC Part 15 Class A, ICES-003 Class A

• CE Safety: EN60065

EMC: EN55022 1998, Class A

EN61000-3-2 1995 EN61000-3-3 1995 EN55024 1998 EN61000-4-2 1995 EN61000-4-3 1996 EN61000-4-4 1995 EN61000-4-5 1995 EN61000-4-6 1996 EN61000-4-8 1993 EN61000-4-11 1994

• AS Safety: IEC60065 EMC: AS/NZS 3548

Regulation---PDS5004W

• EMC:FCC Part 15 Class B, ICES-003 Class B

• CE Safety: EN60065

EMC: EN55022 1998, Class B

EN61000-3-2 1995 EN61000-3-3 1995 EN55024 1998 EN61000-4-2 1995 EN61000-4-3 1996 EN61000-4-4 1995 EN61000-4-5 1995 EN61000-4-6 1996 EN61000-4-8 1993 EN61000-4-11 1994

• AS Safety: IEC60065 EMC: AS/NZS 3548

English

Regulation---PDS6101W

• UL, CSA Safety: UL60950/CSA C22.2 No.60950 EMC: FCC Part 15 Class A, ICES-003 Class A

• CE Safety: EN60950 1992, A1: 1993, A2: 1993, A3: 1995, A4: 1997 EMC: EN55022 1998, Class A

EN61000-3-2 1995 EN61000-3-3 1995 EN55024 1998 EN61000-4-2 1995 EN61000-4-3 1996 EN61000-4-4 1995 EN61000-4-5 1995 EN61000-4-6 1996 EN61000-4-8 1993 EN61000-4-11 1994

• AS Safety: IEC60950 A1/A2/A3/A4 EMC: AS/NZS 3548

Regulation---PDS5003U/PDS5004U

• UL, CSA Safety: UL6500,C-UL

EMC:FCC Part 15 Class A, ICES-003 Class A (PDS5003U) EMC:FCC Part 15 Class B, ICES-003 Class B (PDS5004U)

E-45

CLEANING AND MAINTENANCE

Precautions

Be sure to remove the power plug from the receptacle before cleaning the display. Be sure not to clean the display using a cloth dampened with volatile solvents, such as benzene or thinner. Such solvents can harm the display’s cabinet, the filter at the screen front, and the remote control. They can also cause paint to come off these sections.

Cleaning the Screen

Clean the screen gently with a soft cloth. The screen surface is fragile. Never attempt to clean it with a hard material, press on it forcefully, or tap it.

Cleaning the Cabinet and Remote Control

Use a soft cloth for cleaning. If the cabinet or remote control is heavily stained, soak a soft cloth in a mixture of water and detergent and squeeze it dry before wiping off the stains. Use a soft, dry cloth for final cleaning.

Cleaning the ventilation grille

Remove dust from the ventilation grille in the rear of the main unit periodically with a vacuum cleaner as the accumulated dust can increase the internal temperature of the main unit causing machine failure or fire hazard.

HANDY TIPS

In the event of problems with the display, check the following explanations before contacting your dealer for servicing.

Problem

• Power does not turn ON.

• No pictures are displayed.

• Remote control does not function properly.

• The display makes a snapping sound.

• The display makes a buzzing sound.

• There are spots on the screen.

• Degraded colors/tints

• Improper screen position/size

• No sound

• If “Invalid operation” appears.

• If “Out of range” appears, the display is

receiving a signal whose picture or signal cannot be reproduced by the display.

• The screen turns to black and white.

• If “Error message Condition 1” appears,

the fan is defective.

• If “Error message Condition 2” appears,

the display’s internal components are extremely hot.

• If "Change refresh rate to 60Hz"appears,

• If the power indicator lamp flashes red.

• Check whether the power plug is securely inserted into the receptacle.

• Check cables for disconnection.

• Check whether the power for all input equipment is ON.

• Check for connection to wrong terminals or for wrong input mode.

• Check whether the input mode display is colored pink.Special setup may have been

made. Return to original setup or initialize the User adjustment value.

• Check for incorrect battery orientation.

• Check for dead batteries.

• Check for distance from the display.

• Check whether you are pointing the remote control transmitter properly at the display’s

receiver.

• Check for any obstacle between the remote control and the display.

• This sound is produced when the cabinet expands or contracts due to variations in

temperature. This sound does not indicate that the display has a problem.

• The display has fans to maintain the temperature of internal components at a constant level. This sound is produced by the fan as it rotates.

• Check whether your AV equipment is affected by interference from automobiles, trains, high-voltage transmission lines, neon signs or other potential sources of interference.

• Check whether all picture adjustments have been properly made. (See “Adjusting Pictures” on P. E-26–E-27.)

• Check whether screen position and size have been properly adjusted. (See “Adjusting Screen Position and Size” on P. E-28–E-29.)

• Check cables for disconnection.

• Check whether you have selected “No Audio” for the “Audio Input” setting. (See “Features” on P. E-37.)

• Check whether you have selected “Input Priority”.(See “Features” on P. E-38.)

• Input proper signals.

Make sure that the vertical frequency of the input signal is 85 Hz or less for SVGA/ UXGA 75 Hz or less for XVGA / SXGA.

• Remove the power plug from the receptacle, and contact your dealer for repairs.

• Remove the power plug from the receptacle. (You can turn the power back ON again

when the components have cooled sufficiently.) If the message appears again when you turn the power back on, remove the power plug from the receptacle, and contact your dealer for a repairs.

• The picture may get blurred with vertical frequency of other than 48.3-51.8 or 58.4-61.4 (Hz). Change the setting of your PC,etc.

• Remove the power plug from the receptacle, and inform your dealer about how the lamp flashed. As explained below, the power indicator lamp flashes differently depending on the type of problem:

– Flashes repeatedly: Improper supply voltage level – Flashes once: Malfunction by the fan – Flashes twice: Excessive temperature – Flashes three times or more: Other problems

Action

E-46

1116, Suenaga, Takatsu-ku, Kawasaki 213-8502, Japan

Printed in Japan

8113153019

Fujitsu PDS6101W, PDS5004W, PDS5003U, PDS5003W, PDS5004U User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual

Contents

DECLARATION OF CONFORMITY

SAFETY PRECAUTIONS

FEATURES

ACCESSORIES

HANDY TIPS

INSTALLATION

PART NAMES AND FUNCTIONS

USING THE REMOTE CONTROL

CONNECTING THE DISPLAY TO EXTERNAL EQUIPMENT

BASIC OPERATIONS

SELECTING INPUT MODE

WATCHING PICTURES ON THE WIDE SCREEN

HOW TO USE MENUS

ADJUSTING PICTURES (PICTURE MENU)

ADJUSTING SCREEN POSITION AND SIZE (POSITION/SIZE MENU)

ADJUSTING AUDIO (AUDIO MENU)

OTHER ADJUSTMENTS (FEATURES MENU)

INITIALIZATION OF USER ADJUSTMENT VALUE(FACTORY DEFAULT)

OPTIONS

FACTORY SETTINGS

SPECIFICATION

CLEANING AND MAINTENANCE