PDS5003W-H/S
PDS5004W-S
PDS5003E-H/S
PDS5003U-H/S
PDS5004E-S
PDS5004U-S
FUJITSU GENERAL Proprietary
Copy Prohibited
VIDEO MODE ADJUSTMENTVIDEO MODE ADJUSTMENTVIDEO MODE ADJUSTMENTVIDEO MODE ADJUSTMENT
{-30 to +30 (Comp. Video -16 to +16) (1080I,720P -32 to +32)}
{-7 to +7 (Zoom:-15 to +15) (Comp. Video -16 to +16) (1080I,720P -32 to +32)}
{-7 to +7 (Comp. Video -4 to +4)}
{-7 to +7 (Comp. Video -4 to +4)}
{-8 to +8} *Only Comp. Video
{-30 to +30 (Comp. Video -60 to +60)}
Zoom 1
Zoom 2
кий
- 10 -
- 12 -
TROUBLESHOOTING USING LED AND OSD
1. Display
(1) OSD
Two kinds of error messages are displayed on the screen, and the power is turned off 10 sec later.
(2) LED
LED error is displayed continuously after the power is turned off.
2. Error types and check points
On screen display Cause Check point
ERROR MESSAGE CONDITION 1
Fan protector operated
Fan
Main/Digital PCB
ERROR MESSAGE CONDITION 2
Temperature protector
operated
Ambient temperature of unit
Main/Digital PCB
Temp. sensor IC757
(1) OSD
LED lamp display status Cause Check point
Steady light (Red)
Stand-by status
Continuous
Flashes continuously (Red)
No power
Power supply protector
operated
1 time
Flashes once every 4 sec. (Red)
Fan protector operated
Fan
Main/Digital PCB
Main/Digital PCB
2 times
Flashes twice every 5 sec. (Red)
Temperature protector
operated
Ambient temperature of unit
Temperature sensor IC757
Main/Digital PCB
4 times
Flashes four times every 7 sec.
(Red)
Main/Digital circuit faulty Main/Digital PCB
5 times
Flashes five times every 8 sec.
(Red)
Video circuit faulty Video PCB Assy
(2) LED
--------------------
PDP panel
- 12 -
MAIN POWER SELECTOR SWITCH ADJUSTMENT
Adjustment
Note:
Confirm the main voltage set switch is set to 230V. (W and E version)
Confirm the main voltage set switch is set to 110V. (U version)
230V covers input AC voltage from 200V till 260V, and 110V covers from
90V till 130V.
- 19 -
EXPLANATION OF LABELS
Panel Label Information
MC106W36P4
No.
Vbk : Vsus :
Ve : Vad
MADE IN JAPAN
Panel Production Date
Panel Production Date
For Example---------1.8.2
18 2
Year Month
9 : 1999 1 : JAN 1 : Beginning of Month(01-10th)
0 : 2000 2 : FEB 2 : Middle of Month (11-20th)
1 : 2001 3 : MAR 3 : End of Month (21-31st)
2 : 2002
9 : SEP
0 : OCT
N : NOV
D : DEC
For Example----------- YA1450001
YA 1 4 5 0001 * MID/AUG/2001
* YA Production Line
1 Production Line No. 4 Production Period (Day)
1st Month
2 Production Year 1 : BEG (1-10)
1 : 2001 2 : MID (11-20)
2 : 2002 3 : END (21-30/31)
2nd Month
3 Production Month 4 : BEG (1-10)
1 : JAN-FEB 5 : MID (11-20)
2 : MAR-APR 6 : END (21-30/31)
3 : MAY-JUN
4 : JLY-AUG 5 Serial Number
5 : SEP-OCT From 0001----6 : NOV-DEC
1
2
3
4
5
* * *
.
.
*****
V
*****
V
:
*****
V
*****
V
**********
1
2
3
4
5
Unit Serial Number
Panel Part Number
Panel Serial Number
Adjustment Voltage
- 20 -
REPLACEMENT PARTS AND REQUIRED ADJUSTMENT
Caution
Preparation
Quick adjustment after PCB replacement
To remove PCB, wait for 1 minute after power was turned off for electrolytic capacitors to discharge.
Wide------------------ Auto
Input------------------ White pattern
PCB Item VR Test Point Level
Vsus R639 TPVsus Vsus ± 1V
Vbk R513 TPVBK 140V ± 5V
Vda R528 P27 connector pin 2 75V ± 0.5V
PFC R548 P4 connector pin 1 400V ± 1V
Vset R6940 TPSET 224V ± 1V
Vad R960 TPVAD VAD ± 1V
Sustain Drive PCB Ve R6829 TPVE VE ± 1V
Panel Drive Power PCB Vad R960 TPVAD VAD ± 1V
Vsus R639 TPVsus Vsus ± 1V
Vad R960 TPVAD VAD ± 1V
Ve R6829 TPVE VE ± 1V
Panel Glass
Scan Drive PCB
Power Supply PCB
- 21 -
R6490/Vset
R639/Vsus R528/Vda R513/Vbk R960/Vad
R6556 R6524
S701
110V/230V Switch
R548/PFC R6829/Ve
TPSC1
R6524
TPSC2
TPVAD TPSS1 TPVe TPSS1
TPVscn TPVset TPVsus TPVbk
Label (Panel Information)
Label (Serial Number for Unit)
TPPR1 TP15V TPSS1
Adjustment VR Location
Test Point Location
VR AND TEST POINT LOCATION
- 22 -
Ref.no. Description PDS5003W-H PDS5003E-H PDS5003U-H PDS5003W-S PDS5003E-S PDS5003U-S
Packing Pad-Bottom 8112249003
Cabinet Case Front 8112221009 8112484008
Case Rear 8112437004
Electric Fan Motor 8900280003
Optical Filter 8113177008
Filter PCB Assy 8112791007 8112792004 8112791007 8112523004
Audio Connection PCB 8113113006
Audio Main PCB 8113083002
Connection PCB Assy 8113075007
DC/DC PCB Assy 8113081008
I/O PCB Assy 8113073003
Key Switch PCB Assy 8113079005
LED/PHOTO PCB Assy 8113077001
Main Digital PCB Assy 8113339000
Video PCB Assy 8113071009
PDP Unit S141010282
Power Cord VDE 8112527002 ----------- 8112527002 ---------- UL.CSA ----------- ----------- 8112528009 ----------- ----------- 8112528009
Remote Control Unit 8108442005 8110867001
Panel Glass S141010107
Panel Drive Power PCB (P4) S141009958
Data Drive (Upper Left) PCB (C1) S141009965
Data Drive (Upper Center) PCB (C2) S141009972
Data Drive (Upper Right) PCB (C3) S141009989
Data Drive (Lower Right) PCB (C4) S141009996
Data Drive (Lower Center) PCB (C5) S141010008
Data Drive (Lower Left) PCB (C6) S141010015
Scan Drive Output (Upper) PCB (SU) S141010022
Scan Drive Output (Lower) PCB (SD) S141010039
Scan Drive PCB (SC) S141010046
Sustain Drive PCB (SS) S141010053
Saving Power (Upper/Lower Right) PCB (C7) S141010060
Saving Power (Upper/Lower Left) PCB (C8) S141010077
Power Supply PCB (P1) S141010084
Digital Process and Control PCB (D) S141010091
Packing Carton Top 8112482004
Carton Bottom 8112247009
Packing Joint-D 8108655009
Packing Pad-Top 8112248006
: Same as left
TRANSPORTATION AND HANDLING RESTRICTIONS
Transportation
Bad loading
Don't load the plasmavision on a truck
as shown in the drawing.
Handling
Never drop.Never topple.
Don't hold the
surface of the
optical filter.
Over 20 cm
Drop
Floor
- 60 -
3
Don't stack the
plasmavision over
two units high.
Example of good transportation and handling
Good loading
Load the plasmavision as shown above.
2
- 61 -
Ref.no. Description PDS5004W-S PDS5004E-S PDS5004U-S
Cabinet Case Front 8112484008
Electric Fan Motor 8900280003
Optical Filter 8112399005
Filter PCB Assy 8112791007 8112792004
Audio Connection PCB 8113113006
Audio Main PCB 8113083002
Connection PCB Assy 8113113006
DC/DC PCB Assy 8113081008
Key Switch PCB Assy 8113079005
LED/PHOTO PCB Assy 8113077001
Main Digital PCB Assy 8113339000
Video PCB Assy 8113071009
Power Cord VDE 8112527002 -----------
UL.CSA ----------- ----------- 8112528009
Remote Control Unit 8110867001
Panel Drive Power PCB (P4) S141009958
Data Drive (Upper Left) PCB (C1) S141009965
Data Drive (Upper Center) PCB (C2) S141009972
Data Drive (Upper Right) PCB (C3) S141009989
Data Drive (Lower Right) PCB (C4) S141009996
Data Drive (Lower Center) PCB (C5) S141010008
Data Drive (Lower Left) PCB (C6) S141010015
Scan Drive Output (Upper) PCB (SU) S141010022
Scan Drive Output (Lower) PCB (SD) S141010039
Scan Drive PCB (SC) S141010046
Sustain Drive PCB (SS) S141010053
Saving Power (Upper/Lower Right) PCB (C7) S141010060
Saving Power (Upper/Lower Left) PCB (C8) S141010077
Power Supply PCB (P1) S141010084
Digital Process and Control PCB (D) S141010091
Packing Carton Top 8112482004
Packing Joint-D 8108655009
Packing Pad-Top 8112248006
Packing Pad-Bottom 8112249003
: Same as left
1.LayoutofMainPCB.(2of3)
F: Data Drive (Lower
Right) PCB
H: Data Drive (Lower
Left) PCB
K: Scan
Drive
G: Data Drive (Lower
Center) PCB
I: Scan Drive Output (Upper)
J: Scan Drive Output (Lower)
L: Sustain
Drive
PCB
M: Saving Power
(Upper/Lower Left)
PCB
N: Saving Power
(Upper/Lower Right)
1. Layout of Main PCB (3 of 3)
O: Power
Supply
PCB
Q: Audio
P: Digital
Process
and
Control
2. Removing the Video PCB
* The Video PCB can be removed without
moving the Rear Case.
1) Remove the 2 circled screws.
2) Pull out the Video PCB Unit from the
Plasmavision.
3) Remove 5 screws from the Video PCB Unit.
4) Remove the Video PCB Assy.
3. Removing the PFC PCB
1) Remove the Rear Case.
2) Remove the 2 screws and PFC cover.
3) Disconnect the circled connector.
4) Remove the 5 screws and PFC PCB.
* View after PFC PCB removed.
4. Removing the Main Digital PCB (1 of 3)
1) Remove the Rear Case.
2) Remove the Video Unit.
3) Remove the DC/DC PCB.
4) Remove the 3 screws and I/O PCB.
4. Removing the Main Digital PCB (2 of 3)
5) Disconnect the circled connector.
6) Remove the 12 screws and Main
Digital Unit.
7) Remove the shield.
8) Turn over the Main Digital PCB.
4. Removing the Main Digital PCB (3 of 3)
9) Remove the Connection PCB.
* View after Main Digital PCB removed.