Fujitsu P42VHA30W, P42HHA30W User Manual

USER’S MANUAL (1/2)

(Specification and Part Names)

42” WIDE PLASMA DISPLAY

P42VHA30W/P42HHA30W

Contents

English

Page

• Accessories ······················································ E-2

• Part Names and Functions ······················· E-3–E-5

• Installation ······················································· E-6

• Options ····························································· E-7

• Main Supported Signals ································· E-8

• Specification ···················································· E-9

Before Use

• Safety Precautions ··············· User’s manual (2/2)

Usage

• Handy Tips ···························· User’s manual (2/2)

• Connecting the Display to External Equipment ···························· User’s manual (2/2)

• Using the Remote Control ··· User’s manual (2/2)

• Basic Operations ·················· User’s manual (2/2)

• Selecting Input Mode ··········· User’s manual (2/2)

• Other Basic Operations ········ User’s manual (2/2)

• Watching Pictures on the Wide Screen

··············································· User’s manual (2/2)

Adjustments

• Ajustment Menu ··················· User’s manual (2/2)

• Adjusting Pictures (PICTURE Menu)

··············································· User’s manual (2/2)

• Adjusting Screen Position and Size (POSITION/SIZE Menu) ········ User’s manual (2/2)

• Adjusting Audio (AUDIO Menu)

··············································· User’s manual (2/2)

• Other Adjustments (FEATURES Menu) ··············· User’s manual (2/2)

• Initialization of User Adjustment Value (FACTORY DEFAULT) ··········· User’s manual (2/2)

• Cleaning and Maintenance ··· User’s manual (2/2)

Before using the display, read the User’s manual (1/2) and the User’s manual (2/2) carefully so that you know how to use the display correctly. Refer to these manuals whenever questions or problems about operation arise. Be sure to read and observe the safety precautions. Keep these manuals where the user can access them readily. * Installation and removal require special expertise. Consult your product dealer for details.

ACCESSORIES

CHECKING ACCESSORIES

Two AA batteriesOne remote control Two big ferrite



One power cableTwo user’s manuals

cores

Two small ferrite

cores

CONNECTING THE DISPLAY TO EXTERNAL EQUIPMENT

Carefully check the terminals for position and type before making any connections.

Loose connectors can result in picture or color problems. Make sure that all connectors are securely inserted into their terminals.

Ferrite cores

These ferrite cores are used to attenuate undesired signals.

Two big ferrite cores

When connecting a cable to the power input terminal, RS-232C terminal, attach one of these ferrite cores to the cable near the terminal.

Power Cable

Ferrite Core

Two small ferrite cores

When connecting a cable to the external speaker output terminal attach one of these ferrite cores to the cable near the terminal.

Ferrite Core

RS-232C Cable

Ferrite Core

E-2

PART NAMES AND FUNCTIONS

DISPLAY SECTION – FRONT

English

(Right section)

①

②

⑨

Control Panel (Right side of display)

1 Power indicator lamp

This lamp shows the state of the power supply.

Lit (red): Stand-by

Lit (green): Power ON

Lit (orange): Power saving (DPMS: Power

saving function) mode ON. (Please refer to E-30 of the User's Manual(2/2).)

Flashing (red or green): Malfunction (Flashes differently

depending on the type of malfunction.)

2 Remote control signal receiver

Receives signals from the remote control.

3 Input mode selector button

4 Input mode selector button

Switches between picture input modes.

5 VOL + button

6 VOL – button

Adjusts the audio volume.

7 Wide screen selector button [WIDE]

Switches the screen over to a desired wide screen.

8 ON/OFF button

Turns the power “ON” and “OFF (standby state)”.

[MODE]

Warning

If the power indicator lamp flashes red or green, this signifies that the display has developed a problem. When this happens, be sure to remove the power plug from the receptacle and contact your dealer. Leaving the display power ON can result in fire or electric shock.

E-3

PART NAMES AND FUNCTIONS (Continued)

Back and bottom

1 /I power switch

When pressed while in the “OFF” state, the power indicator lamp lights and the display is placed in the “ON can be turned “ON” or “OFF” by the remote control or on the control panel of the display. When pressed while in the “ON the power indicator lamp goes out and the display is placed in the “OFF” state where power is still partly supplied.

2 RS-232C terminal (RS-232C)

This terminal is provided for you to control the display from the PC. Connect it to the RS-232C terminal on the PC. When connecting a cable, attach a ferrite core to the cable. (See P. E-2.)

3 RGB1 input terminal (RGB1 INPUT/DVI-D)

Connect this terminal to the PC’s display (digital RGB) output terminal. *The connection cable No.88741-8000 made by molex Inc. is recommanded.

4 RGB2 input terminal (RGB2 INPUT/mD-sub)

Connect this terminal to the PC’s display (analog RGB) output terminal or decoder (digital broadcast tuner, etc.) output terminal.

5 Component video input terminal (VIDEO3 INPUT) 6 Component video input terminal (VIDEO4 INPUT)

Connect this terminal to the component video output (color difference output) terminal of your HDTV unit or DVD player.

7 Video input terminal (VIDEO1 INPUT)

Connect this terminal to the video output terminal of your VCR.

8 S-Video input terminal (VIDEO2 INPUT)

Connect this terminal to the S-video output terminal of your VCR.

” state, and the power

” state,

9 Audio3 input terminal (AUDIO3 INPUT) 0 Audio2 input terminal (AUDIO2 INPUT) A Audio1 input terminal (AUDIO1 INPUT)

Connect this terminal to the audio output terminal of your VCR, etc. (See the User’s manual (2/2) for the selection of audio input for video input.)

B External speaker output terminal (EXT SP)

Connect this terminal to the optionally available speaker. When connecting a cable, attach a ferrite core to the cable. (See P. E-2.) *See the speaker instruction manual for more information.

C Power input terminal

Connect this terminal to the power cable supplied with the display. When connecting a cable, attach a ferrite core to the cable. (See P. E-2.)

Description of Input Terminals

DVI-D terminal (RGB1 INPUT/DVI-D)

English

RGB2 input terminal (RGB2 INPUT/mD-sub)

RS-232C terminal (RS-232C)

Pin No. Input signal Pin No. Input signal

1 Red 9 —

2Green 10 Ground

3 Blue 11 —

4— 12—

5 Ground 13 Horizontal synchronization

6 Ground 14 Vertical synchronization

7 Ground 15 —

8 Ground Frame Ground

Pin No. Signal

1 DCD (Data Carrier Detect)

2 RD (Received Data)

3 TD (Transmit Data)

4DTR (Data Terminal ready)

5 GND (Ground)

6 DSR (Data Set Ready)

7RTS (Request To send)

8 CTS (Clear To Send)

9 RI (Ring Indication)

*Terminal layout may differ and functions may not be available with some models and some device options.

INSTALLATION

To prevent the display’s internal components from overheating, make sure that the display is installed in a well-ventilated location.

Be sure to use the optional desktop stand, ceiling-mounting unit, wall-mounting unit and other unit when installing this display. Also, be sure that your dealer performs the installation.

See the appropriate instruction manual for more information on the installation hardware you select.

To ensure proper heat radiation, provide at least as much space around the display as shown below.

* Make sure that the display is installed in a location where the temperature can be maintained between 0°C and 40°C.

* Install this device in a well-ventilated area. Keep the air vents of the device free from obstruction.

*Never attempt to tilt the display sideways or backward.

*To prevent the power and other cables from being accidentally pulled, be sure to make the wiring work along the wall or through the

corners of floor.

*To prevent an accident and ensure safety in the event of an earthquake, fix the display securely into position as described below.

Horizontal type

Front

(cm) (cm)

Side

Left

Upper

Lower

Right

Wall

3.5

Note

The display is a highly precise piece of equipment and therefore must be packed properly before transportation. Be sure to use only those packing materials originally supplied with the display when repacking it.

Reference

See P.E-7 for more information on options.

E-6

OPTIONS

Wall-mounting Bracket 0° to 15° mounting angle P-WB4201

Ceiling unit 0° to 15° mounting angle P-CT4200

Desktop Stand unit P-TT4200

English

Speaker P-SP4200

(1 set of 2 speakers)

Desktop Speaker Stand P-ST4200

(1 set of 2 speakers stands)

*When installing an option, make sure that all installation requirements for that option (as given in the relevant instruction manual) are met.

*The colors of options do not match the display colors perfectly.

*To improve the function and performance of optional accessories, specifications and part names may change. Consult your local dealer

before purchasing.

Warning

To prevent injury, fire, and electric shock, arrange for options to be initially installed (or installed at a different location) by your dealer.

CAUTION: This display (P42VHA30, P42HHA30) is for use only with Fujitsu General Limited’s option (P-

WB4201, P-CT4200, P-TT4200). Using this display with other option can cause instability resulting in possible injury.

E-7

MAIN SUPPORTED SIGNALS

This display can store the latest four types of signals for RGB adjustment value. The fifth input signal will replace the adjustment value of the first input signal.

To do this, select a desired signal and follow the instructions in “Adjusting Screen Position and Size” on the User’s manual (2/2) to adjust the parameters. When you finish, the settings will be automatically stored. Thus, when the display receives that signal, pictures will be displayed in accordance with the settings you most recently selected.

Main corresponding signals (RGB mode)

Display (dots x lines)

640 x 480 31.47 59.94 VGA

640 x 480 37.50 75.00 VGA 75 Hz

640 x 480 43.27 85.01 VGA 85 Hz

720 x 400 31.47 70.09 400 lines

800 x 600 37.88 60.32 SVGA 60 Hz

800 x 600 46.88 75.00 SVGA 75 Hz

800 x 600 53.67 85.06 SVGA 85 Hz

1024 x 768 48.36 60.00 XGA 60 Hz

1024 x 768 60.02 75.03 XGA 75 Hz

1024 x 768 68.68 84.99 XGA 85 Hz

1280 x 1024 63.98 60.02 SXGA 60 Hz

1280 x 1024 79.98 75.03 SXGA 75 Hz

848 x 480 31.02 60.00

852 x 480 31.72 59.97

1360 x 768 47.71 60.01

720 x 485 15.73 59.94 60 fields

720 x 575 15.63 50.00 50 fields

*With some input signals, “Out of range” may appear even when the horizontal and vertical frequencies are within their permissible ranges. In this

event, match the input signals to another frequency rather than those listed above.

* In the DVI-D mode, the input signal can be restricted partly.

Horizontal frequency (kHz) Vertical frequency (Hz)

Signal

DVI-D

In the Comp.video and Video/S-video modes, the display has been factory-set as follows for different input signals:

Main corresponding signals (Comp.video mode)

Horizontal

frequency (kHz)

15.73 59.94 SDTV 480I

15.63 50.00 SDTV 576I

31.47 59.94 SDTV 480P

31.25 50.00 SDTV 576P

45.00 60.00 HDTV 720P

37.50 50.00 HDTV 720P

33.75 60.00 HDTV 1080I

28.13 50.00 HDTV 1080I

•Depending on the input signal, the display may show pictures of reduced size due to size reduction and interpolation.

• “Out of range” appears if the display receives a signal whose characteristic does not fall within the display’s permissible range.

•You can check input signals through “Information” on the FEATURES Menu screen. (See User’s Manual (2/2))

• In order to facilitate the explanations, pictures and diagrams in this manual may differ slightly from the actual items.

• All terms (i.e., company and product names) used in this document are trademarks or registered trademarks.

• Function may be different or unavailable with some models and some device options.

Ver tical

frequency (Hz)

Signal

Main corresponding signals (Video, S-video mode)

Horizontal

frequency (kHz)

15.73 59.94 NTSC

15.63 50.00 PAL

15.63 50.00 SECAM

15.63 59.52 PAL60

15.63 50.00 N-PAL

15.73 59.95 M-PAL

15.73 59.94 4.43NTSC

Ver tical

frequency (Hz)

Signal

E-8

SPECIFICATION

Model P42VHA30W P42HHA30W

Screen size 42" wide screen: 42" wide screen:

92.1 cm (W) x 51.8 cm (H) (105.7 cm diagonal) 92.2 cm (W) x 52.2 cm (H) (106.0 cm diagonal)

36.3 inch (W) x 20.4 inch (H) (41.6 inch diagonal)

Aspect ratio 16:9 (wide)

Weight 30 kg / 66 lbs

Outer dimensions 103.7 (W) x 64.2 (H) x 8.5 (D) cm

40.8 (W) x 25.3 (H) x 3.3 (D) inch (does not include outer projections)

Power supply 110–240 VAC 50/60 Hz

Current rating 3.5–1.35 A 4.0–1.95 A

Number of pixels 852 (H) x 480 (V) 1024 (H) x 1024 (V)

External equipment terminals

Video input terminals VIDEO1 INPUT (Video input) 1 RCA terminal 1 Vp-p/75 Ω

VIDEO2 INPUT (S-video input) 1 S terminal Y: 1 Vp-p/75 Ω

VIDEO3/VIDEO4 INPUT 3 RCA terminals Y: 1 Vp-p/75 Ω (Component video input) P

– – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – –

Applicable systems NTSC/PAL/SECAM/PAL60/N-PAL/M-PAL/4.43NTSC

PC input terminal RGB1 input 1 DVI-D terminal (EIA/CEA-861B Compliant)

RGB2 input mD-sub, 3 rows, 15-pin

Picture signal: 0.7 Vp-p/75 Ω Synchronization signal:TTL level

Audio terminals 2 audio input pin jacks (L/R) (3 lines)

500 mVrms/at least 22 kΩ

Control terminal 1 RS-232C connector (D-sub 9-pin)

External speaker output terminal

Operating conditions Temperature: 0 to 40 °C / 32 to 104 °F

Accessories 1 remote control, 2AA batteries, 2 user’s manuals, 1 power cable, 2 big ferrite cores,

Effective max. output: 10 W + 10 W (EIAJ), 6 Ω

Humidity: 20 to 80 %

2 small ferrite cores

36.3 inch (W) x 20.6 inch (H) (41.7 inch diagonal)

C: 0.286 Vp-p/75 Ω

B/CB: 0.7 Vp-p/75 Ω

R/CR: 0.7 Vp-p/75 Ω

English

Regulation

• UL, CSA Safety: UL6500, C-UL EMC: FCC Part 15 Class B, ICES-003 Class B

•CE Safety: EN60065 EMC: EN55022 1998, Class B

EN61000-3-2 1995 EN61000-3-3 1995 EN55024 1998 EN61000-4-2 1995 EN61000-4-3 1996 EN61000-4-4 1995 EN61000-4-5 1995 EN61000-4-6 1996 EN61000-4-8 1993 EN61000-4-11 1994

•AS Safety: IEC60065 EMC: AS/NZS 3548

• Specifications and external appearance may be change for the sake of improvement.

•Viewing the screen constantly for extended periods can strain your eyes. Be sure to stay at a proper distance (at least 1.5 m or 5 feet) from the screen and to look occasionally away while working.

• is a worldwide trademark of Fujitsu General Limited and is a registered trademark in Japan, the U.S.A. and other countries or areas.

E-9

USER’S MANUAL (2/2)

(Precautions and Adjustment Methods)

WIDE PLASMA DISPLAY

English

Contents

Before Use

• Safety Precautions ···························································································· E-2–E-3

Usage

• Handy Tips ················································································································· E-4

• Connecting the Display to External Equipment ·············································· E-5–E-8

• Using the Remote Control ·············································································· E-9–E-11

• Basic Operations ··························································································· E-12–E-13

• Selecting Input Mode ······························································································ E-14

•

Other Basic Operations ··································································································

•Watching Pictures on the Wide Screen ······················································· E-16–E-17

Adjustments

• Adjustment Menu ··································································································· E-18

• Adjusting Pictures (PICTURE Menu) ···························································· E-19–E-21

• Adjusting Screen Position and Size (POSITION/SIZE Menu) ···················· E-22–E-23

• Adjusting Audio (AUDIO Menu) ·································································· E-24–E-25

•

Other Adjustments (FEATURES Menu) ································································

• Initialization of User Adjustment Value (FACTORY DEFAULT) ····························E-33

• Cleaning and Maintenance ····················································································· E-34

E-26–E-32

Page

E-15

SAFETY PRECAUTIONS

IMPORTANT INFORMATION

IMPORTANT

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

CAUTION: TO PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED

SERVICE PERSONNEL.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

WARNING: This is a Class A and Class B product. In a domestic environment this product may cause radio

interference in which case the user may be required to take adequate measures.

WARNING: TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS

PRODUCT TO RAIN OR MOISTURE.

FCC NOTICE

•A Class A digital device This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

•A Class B digital device This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: – Reorient or relocate the receiving antenna. – Increase the separation between the equipment and receiver. – Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. – Consult the dealer or an experienced radio/TV technician for help.

IMPORTANT SAFETY INSTRUCTIONS

Electrical energy can perform many useful functions. This unit has been engineered and manufactured to assure your personal safety. But IMPROPER USE CAN RESULT IN POTENTIAL ELECTRICAL SHOCK OR FIRE HAZARD. In order not to defeat the safeguards incorporated into this product, observe the following basic rules for its installation, use and service. Please read these “Important Safeguards” carefully before use.

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with dry cloth.

7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifier’s) that produce heat.

9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit

from the apparatus.

11) Only use attachments/accessories specified by the manufacturer.

E-2

12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus.

When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13) Unplug this apparatus during lightning storms or when unused for long periods of time.

14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any

way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the

apparatus has been exposed to rain or moisture, dose not operate normally, or has been dropped. – Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. – Do not use attachments not recommended by the product manufacturer as they may cause hazards. – Do not use immediately after moving from a low temperature to high temperature, as this causes condensation, which may result in fire,

electric shock, or other hazards. –The apparatus shall not be exposed to dripping or splashing. – No objects filled with liquids, such as vases, shall be placed on the apparatus. – Do not place this product on an unstable cart, stand, or table. The product may fall, causing serious injury to a child or adult, and serious

damage to the product. The product should be mounted according to the manufacturer’s instructions, and should use a mount

recommended by the manufacturer. –When the product is used on a cart, care should be taken to avoid quick stops, excessive force, and uneven surfaces which may cause the

product and cart to overturn, damaging equipment or causing possible injury to the operator. – Slots and openings in the cabinet are provided for ventilation. These ensure reliable operation of the product and protect it from

overheating. These openings must not be blocked or covered. (The openings should never be blocked by placing the product on bed,

sofa, rug, or other similar surface. It should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is

provided and the manufacturer’s instructions have been adhered to.)

For proper ventilation, separate the product from other equipment, which may prevent ventilation, and keep distance more than 10 cm. –This product should be operated only from the type of power source indicated on the label. If you are not sure of the type of power

supply of your home, consult your product dealer or local power company. –This product is equipped with a three-wire plug. This plug will fit only into a grounded power outlet. If you are unable to insert the plug

into the outlet, contact your electrician to install the proper outlet. Do not defeat the safety purpose of the grounded plug. –Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them. Pay

particular attention to cords at doors, plugs, receptacles, and the point where they exit from the product. –For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it

from the wall outlet and disconnect the cable system. This will prevent damage to the product due to lightning and power line surges. – Do not overload wall outlets, extension cords, or convenience receptacles on other equipment as this can result in a risk of fire or electric

shock. –Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short out parts that

could result in a fire or electric shock. Never spill liquid of any kind on the product. – Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltages and other hazards.

Refer all service to qualified service personnel. –

Unplug this product from the wall outlet and refer service to qualified service personnel if the product does not operate normally by following

the operating instructions. Adjust only those controls that are covered by the Operation Manual, as an improper adjustment of other controls

may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation. –When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or with

same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards. – Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the

product is in proper operating condition. –The product should be placed more than one foot away from heat sources such as radiators, heat registers, stoves, and other products

(including amplifiers) that produce heat. –When connecting other products such as VCR’s, and personal computers, you should turn off the power of this product for protection

against electric shock. – Do not place combustibles behind the cooling fan. For example, cloth, paper, matches, aerosol cans or gas lighters that present special

hazards when overheated. – Use only the accessory cord designed for this product to prevent shock.

The power supply voltage rating of this product is AC110–240 V and the power cord attached conforms to the following power supply

voltage. Use only the power cord designated by our dealer to ensure Safety and EMC.

When it is used with other power supply voltage, the power cable must be changed.

Use the standard power plug and cord set of the specified country.

Consult your product dealer.

Power cord

English

AC 240 V (SAA TYPE)AC 200–240 VAC 100–125 VPower supply voltage:

E-3

HANDY TIPS

RECEPTACLE

Make sure that the power cable’s grounding wire is grounded.

The display comes with a 3-prong power plug; one prong is connected to the grounding wire. If you have only a 2-hole receptacle, you

will need to have it replaced. Contact your dealer for more information.

•Have the display inspected and cleaned by your dealer at regular intervals.

• Pictures may become “burnt” into the screen phosphors if the screen is left on for extended periods. To ensure that the display has a prolonged service life, be sure to use a screen orbiter, white screen. This will ensure the same picture or pattern is not constantly displayed for long periods. (See P. E-31–E-32.)

•The plasma display panel, which is built for maximum precision, provides more than 99.99% effective pixels. You may find, however, that some pixels constantly remain lit or dimmed.

•The display has a fan to prevent its internal temperature from rising.

• Be careful with the air delivered by the fan. It may be very hot.

• Contact your dealer if you find that the display does not seem to function properly when used with other audio-visual equipment.

You may need to move your display if it produces degraded pictures or noise due to electromagnetic radiation, or if the infrared remote control does not function properly.

• Pictures may not be displayed properly if you connect a non-standard PC to the RGB input terminal. In this case, contact your dealer for more information.

•The protective circuit, built into the display, automatically turns off the power if the display has a problem. In this case, you will see that the power indicator lamp flashes red or green.

Warning

If the power indicator lamp flashes red or green, this signifies that the display has developed a problem. When this happens, be sure to remove the power plug from the receptacle to prevent fire or electric shock. Then contact your dealer.

Information

Cables for connecting the display to external equipment are not supplied. Contact your dealer for more information on these products.

E-4

+ 30 hidden pages