FUJITSU MB91V460 User Guide

Fujitsu Microelectronics Europe

User Guide

MB91V460 FAMILY

PB-91467D-NLS-208PFV

FMEMCU-UG-910019-14

PROBE CABLE

USER GUIDE

PB-91467D-NLS-208PFV

Revision History

Revision History

Date Issue

2005-Nov-15 V1.0, HLi, First Release
2006-Jan-27 V1.0 HLi, corrections
2007-Mar-02 V1.1 Recycling Note added
2007-Apr-11 V1.2 Hli, remove MCU before using probe info added
2008-Sep-16 V1.3, MSc, China-RoHS regulation added
2009-Jan-09

V1.4, MSc, Information WWW updated

UG-910019-14 - 2 - © Fujitsu Microelectronics Europe GmbH

PB-91467D-NLS-208PFV

Warranty and Disclaimer

Warranty and Disclaimer

To the maximum extent permitted by applicable law, Fujitsu Microelectronics Europe GmbH restricts
its warranties and its liability for the PB-91467D-NLS-208PFV Probe and all its deliverables (e.g.
software include or header files, application examples, target boards, evaluation boards, engineering
samples of IC’s etc.), its performance and any consequential damages, on the use of the Product in
accordance with (i) the terms of the License Agreement and the Sale and Purchase Agreement under
which agreements the Product has been delivered, (ii) the technical descriptions and (iii) all
accompanying written materials. In addition, to the maximum extent permitted by applicable law,
Fujitsu Microelectronics Europe GmbH disclaims all warranties and liabilities for the performance of
the Product and any consequential damages in cases of unauthorised decompiling and/or reverse
engineering and/or disassembling. Note, the PB-91467D-NLS-208PFV Probe and all its
deliverables are intended and must only be used in an evaluation laboratory environment.

1. Fujitsu Microelectronics Europe GmbH warrants that the Product will perform substantially in
accordance with the accompanying written materials for a period of 90 days form the date of
receipt by the customer. Concerning the hardware components of the Product, Fujitsu
Microelectronics Europe GmbH warrants that the Product will be free from defects in material
and workmanship under use and service as specified in the accompanying written materials
for a duration of 1 year from the date of receipt by the customer.

2. Should a Product turn out to be defect, Fujitsu Microelectronics Europe GmbH´s entire liability
and the customer’s exclusive remedy shall be, at Fujitsu Microelectronics Europe GmbH´s
sole discretion, either return of the purchase price and the license fee, or replacement of the
Product or parts thereof, if the Product is returned to Fujitsu Microelectronics Europe GmbH in
original packing and without further defects resulting from the customer’s use or the transport.
However, this warranty is excluded if the defect has resulted from an accident not attributable
to Fujitsu Microelectronics Europe GmbH, or abuse or misapplication attributable to the
customer or any other third party not relating to Fujitsu Microelectronics Europe GmbH.

3. To the maximum extent permitted by applicable law Fujitsu Microelectronics Europe GmbH
disclaims all other warranties, whether expressed or implied, in particular, but not limited to,
warranties of merchantability and fitness for a particular purpose for which the Product is not
designated.

4. To the maximum extent permitted by applicable law, Fujitsu Microelectronics Europe GmbH´s
and its supplier’s liability are restricted to intention and gross negligence.

NO LIABILITY FOR CONSEQUENTIAL DAMAGES

To the maximum extent permitted by applicable law, in no event shall Fujitsu

Microelectronics Europe GmbH and its suppliers be liable for any damages whatsoever
(including but without limitation, consequential and/or indirect damages for personal
injury, assets of substantial value, loss of profits, interruption of business operation,
loss of information, or any other monetary or pecuniary loss) arising from the use of
the Product.

Should one of the above stipulations be or become invalid and/or unenforceable, the remaining
stipulations shall stay in full effect

© Fujitsu Microelectronics Europe GmbH - 3 - UG-910019-14

0 Contents

PB-91467D-NLS-208PFV

Contents

REVISION HISTORY............................................................................................................2

WARRANTY AND DISCLAIMER .........................................................................................3

0 CONTENTS...................................................................................................................... 4

1 OVERVIEW...................................................................................................................... 5

Abstract............................................................................................................................ 5

2 DEFAULT JUMPER SETTING.........................................................................................6

3 JUMPERS........................................................................................................................ 8

4 INSTALLATION............................................................................................................... 9

5 DIMENSIONS.................................................................................................................10

5.1 PB-91467D-NLS-208PFV......................................................................................10

5.2 YQ-SOCKET208SDN............................................................................................11

5.3 YQ-PACK208SD...................................................................................................11

5.3 QFP-EXTENDER-208PFV (not included)............................................................. 12

6 INFORMATION IN THE WWW....................................................................................... 13

7 CHINA-ROHS REGULATION........................................................................................ 14

8 RECYCLING.................................................................................................................. 16

UG-910019-14 - 4 - © Fujitsu Microelectronics Europe GmbH

PB-91467D-NLS-208PFV

Chapter 1 Overview

1 Overview

Abstract

The PB-91467D-NLS-208PFV was built to connect the MB2198-300 with a MB91F467D
target-board. The probe-cable has a 120 mm flexible part in the middle. The analogue
signals are shielded.

Related documents such as MB91460 or MB91F46x “Hardware Manual” are available and
should always be use in addition to this manual.

© Fujitsu Microelectronics Europe GmbH - 5 - UG-910019-14

PB-91467D-NLS-208PFV

Jumper

Description / Function

Type

Default

Coordinate

Chapter 2 Default Jumper Setting

2 Default Jumper Setting

The following jumper setting is the default setting. All jumpers are named directly on the
board, so it is easy to set the jumpers according to the features.

JP2
JP3 4x GND Jumper 1x4 open C/D6
JP4 4x 5V_T Jumper 1x4 open D/E7
JP5 3x VDD35 Jumper 1x4 open D/E6
JP6 UVCC3 > JP7/3 Jumper 2pol closed B6/7
JP7 MCU_VCC5, VDD35, UVCC3 Jumper 3x1 2-3 B6/7
JP8 RDY pull up Jumper 2pol closed F6/7
JP9 MCU_VCC5 > 5V_T Jumper 2pol closed B6/7

JP10

JP11

JP12

Power supply of the A/D converter (AVCC5) is

GND (AVSS) of the A/D converter is connected

VCC3C > 10µF | 10nF > GND

connected to the target

Analog high reference voltage of the A/D

converter (AVRH5)

is

connected to the target

to the target

Jumper 2pol closed M/N6

Jumper 2pol

Jumper 2pol

Jumper 2pol

closed

closed

closed

L/M6/7

M6/7

M6/7

JP13 MONCLK > test point Jumper 2pol open E6/7
JP14 Not assembled --- --- B6/7

UG-910019-14 - 6 - © Fujitsu Microelectronics Europe GmbH

PB-91467D-NLS-208PFV

Chapter 2 Default Jumper Setting

A B C D E F G H J K L M N

1
2
3
4
5
6
7
8

9
10
11
12
13
14
15
16

1
2
3
4
5
6
7
8

9
10
11
12
13
14
15
16

17
18
19
20
21
22
23
24
25

17
18
19
20
21
22
23
24
25

A B C D E F G H J K L M N

© Fujitsu Microelectronics Europe GmbH - 7 - UG-910019-14

PB-91467D-NLS-208PFV

tly connected to GND.

Chapter 3 Jumpers

3 Jumpers

This chapter describes all jumpers that can be modified on the probe. The default setting is
shown with a grey shaded area. All jumpers are named directly on the board, so it is very
easy to set the jumpers according to the features.

JP1

JP2 (VCC3C)

JP3 (4x GND)

JP4 (4x 5V_T)

JP5 (3x VDD35)

JP6 (UVCC3 >

JP7,3)

JP7 (VDD35

>UVCC3 or

MCU_VCC5)

JP8 (RDY)

This jumper is not assembled

ON (closed)

OFF (open)

VCC3C is connected to 10 µF | 10 nF > GND
VCC3C is not connected to 10 µF | 10 nF > GND

This header is direc
4x GND

This header is directly connected to 5V_T.

4x 5V_T

This header is directly connected to VDD35.

3x VDD35

ON (closed) UVCC3 and VDD35 are connected

OFF (open) For current measurements

1 – 2 VDD35 > 5 V

2 – 3 VDD35 > 3 V

ON (closed)

RDY via 10 k> VDD35 > pull up

OFF (open)

ON (closed) MCU_VCC5 and 5V_T are connected

JP9 (5 V)

OFF (open) No connection between MCU_VCC5 and 5V_T

ON (closed) Power supply of the A/D converter is connected to

the target

JP10 (AVCC5)

OFF (open) Power supply of the A/D converter is disconnected

from the target

ON (closed)

Analog high reference voltage of the A/D converter
is connected to the target

JP11 (AVRH5)

OFF (open)

Analog high reference voltage of the A/D converter
is disconnected from the target

ON (closed) GND (AVSS) of the A/D converter is connected to

the target

JP12 (AVSS)

OFF (open) GND (AVSS) of the A/D converter is disconnected

from the target

JP13
JP14

UG-910019-14 - 8 - © Fujitsu Microelectronics Europe GmbH

This jumper is not assembled

Test point (MONCLK)

PB-91467D-NLS-208PFV

Chapter 4 Installation

4 Installation

- Remove carefully the board from the shipping carton.

- Check first if there are any damages before power on the evaluation board.

- Press carefully and smooth the YQ-PACK208SD or the QFP-EXTENDER-208PFV in the
YQ-SOCKET208SDN.

- Remove MCU out of the socket (NQ-PACK) before using the probe cable

The connection between YQ-SOCKET208SDN and YQ-PACK208SD
or QFP-EXTENDER-208PFV is only once pluggable, since otherwise
the pins can break off.

h: YQ-PACK208SD f: PB-91467D-NLS-208PFV
g: NQ-PACK208SD j: YQ-SOCKET208SDN
o: Target Board i: YQ-Guide

YQ-PACK208SD QFP-EXTENDER-208PFV

© Fujitsu Microelectronics Europe GmbH - 9 - UG-910019-14

5 Dimensions

5.1 PB-91467D-NLS-208PFV

PB-91467D-NLS-208PFV

Chapter 5 Dimensions

UG-910019-14 - 10 - © Fujitsu Microelectronics Europe GmbH

5.2 YQ-SOCKET208SDN

PB-91467D-NLS-208PFV

Chapter 5 Dimensions

5.3 YQ-PACK208SD

© Fujitsu Microelectronics Europe GmbH - 11 - UG-910019-14

PB-91467D-NLS-208PFV

Chapter 5 Dimensions

5.3 QFP-EXTENDER-208PFV (not included)

A,A´: 37mm J: 1.2mm
B,B´: 30.65mm n2´: 3mm
F: 31.60mm n1,n1´: 51mm

UG-910019-14 - 12 - © Fujitsu Microelectronics Europe GmbH

PB-91467D-NLS-208PFV

Chapter 6 Information in the WWW

6 Information in the WWW

Information about FUJITSU MICROELECTRONICS Products
can be found on the following Internet pages:

Microcontrollers (8-, 16- and 32bit), Graphics Controllers
Datasheets and Hardware Manuals, Support Tools (Hard- and Software)

http://www.fme.gsdc.de/gsdc.htm

For more information about FUJITSU MICROELECTRONICS

http://www.emea.fujitsu.com/microelectronics

© Fujitsu Microelectronics Europe GmbH - 13 - UG-910019-14

PB-91467D-NLS-208PFV

Chapter 7 China-RoHS regulation

7 China-RoHS regulation

Evaluation Board
Emulation Board

根据SJ/T11364-2006
《电子信息产品污染控制标识要求》特提供如下有关污染控制方面的信息。

The following product pollution control information is provided according to SJ/T11364-2006
Marking for Control of Pollution caused by Electronic Information Products.

1．电子信息产品污染控制标志说明 Explanation of Pollution Control Label

评估板

仿真板

该标志表明本产品含有超过中国标准SJ/T11363-2006

《电子信息产品中有毒有害物质的限量要求》中限量的有毒有害物质。标志中的数字为本产品

的环保使用期，表明本产品在正常使用的条件下，有毒有害物质不会发生外泄或突变，用户使

用本产品不会对环境造成严重污染或对其人身、财产造成严重损害的期限，单位为年。

为保证所申明的环保使用期限，应按产品手册中所规定的环境条件和方法进行正常使用，并严

格遵守产品维修手册中规定的定期维修和保养要求。

产品中的消耗件和某些零部件可能有其单独的环保使用期限标志，并且其环保使用期限有可能
比整个产品本身的环保使用期限短。应到期按产品维修程序更换那些消耗件和零部件，以保证

所申明的整个产品的环保使用期限。

本产品在使用寿命结束时不可作为普通生活垃圾处理，应被单独收集妥善处理。

请注意：环保使用期限50年的指定不是与产品的耐久力，使用期限或任何担保要求等同的。

This symbol to be added to all EIO sold to China, indicates the product contains hazardous
materials in excess of the limits established by the Chinese standard SJ/T11363-2006

Requirements for Concentration Limits for Certain Hazardous Substances in Electronic
Information Products. The number in the symbol is the Environment-friendly Use Period

(EFUP), which indicates the period, starting from the manufacturing date, during which the
toxic or hazardous substances or elements contained in electronic information products will
not leak or mutate under normal operating conditions so that the use of such electronic
information products will not result in any severe environmental pollution, any bodily injury or
damage to any assets, the unit of the period is “Year”.

UG-910019-14 - 14 - © Fujitsu Microelectronics Europe GmbH

PB-91467D-NLS-208PFV

Chapter 7 China-RoHS regulation

In order to maintain the declared EFUP, the product shall be operated normally according to
the instructions and environmental conditions as defined in the product manual, and periodic
maintenance schedules specified in Product Maintenance Procedures shall be followed
strictly.

Consumables or certain parts may have their own label with an EFUP value less than the
product. Periodic replacement of those consumables or parts to maintain the declared EFUP
shall be done in accordance with the Product Maintenance Procedures.

This product must not be disposed of as unsorted municipal waste, and must be collected
separately and handled properly after decommissioning.

Please note: The designation of 10 years EFUP is not to be equated with the durability, use­duration or any warranty-claims of the product.

产品中有毒有害物质或元素的名称及含量

Table of hazardous substances name and concentration

部件

部件

名称

名称

部件部件

名称名称

Component Name

有毒有害物质

有毒有害物质

有毒有害物质有毒有害物质

Hazardous substances name

或元素

或元素

或元素或元素

铅铅铅铅

(Pb)

PB-91467D-NLS-208PFV

O: 表示该有毒有害物质在该部件所有均质材料中的含量均在

表示该有毒有害物质在该部件所有均质材料中的含量均在SJ/T11363-2006 标准规定的限量要求以下

表示该有毒有害物质在该部件所有均质材料中的含量均在表示该有毒有害物质在该部件所有均质材料中的含量均在

X: 表示该有毒有害物质至少在该部件的某一均质材料中的含量超出

表示该有毒有害物质至少在该部件的某一均质材料中的含量超出SJ/T11363-2006 标准规定的限量要求

表示该有毒有害物质至少在该部件的某一均质材料中的含量超出表示该有毒有害物质至少在该部件的某一均质材料中的含量超出

x o o o o o

汞汞汞汞

(Hg)

镉镉镉镉

(Cd)

六价铬

六价铬

六价铬六价铬

(Cr(VI))

标准规定的限量要求以下

标准规定的限量要求以下标准规定的限量要求以下

多溴联苯

多溴联苯

多溴联苯多溴联苯

(PBB)

标准规定的限量要求

标准规定的限量要求标准规定的限量要求

多溴二苯醚

多溴二苯醚

多溴二苯醚多溴二苯醚

(PBDE)

• 此表所列数据为发布时所能获得的最佳信息

•

由于缺少经济上或技术上合理可行的替代物质或方案，此医疗设备运用以上一些有毒有害物质来实现设备的

预期临床功能，或给人员或环境提供更好的保护效果

。

O: Indicates that this toxic or hazardous substance contained in all of the homogeneous

materials for this part is below the limit requirement in SJ/T11363-2006.

X: Indicates that this toxic or hazardous substance contained in at least one of the

homogeneous materials used for this part is above the limit requirement in SJ/T11363-2006.

• Data listed in the table represents best information available at the time of publication

© Fujitsu Microelectronics Europe GmbH - 15 - UG-910019-14

PB-91467D-NLS-208PFV

Chapter 8 Recycling

8 Recycling

Gültig für EU-Länder:

Gemäß der Europäischen WEEE-Richtlinie und deren Umsetzung in landesspezifische
Gesetze nehmen wir dieses Gerät wieder zurück.

Zur Entsorgung schicken Sie das Gerät bitte an die folgende Adresse:

Fujitsu Microelectronics Europe GmbH
Warehouse/Disposal
Monzastraße 4a
63225 Langen

Valid for European Union Countries:

According to the European WEEE-Directive and its implementation into national laws we
take this device back.

For disposal please send the device to the following address:

Fujitsu Microelectronics Europe GmbH
Warehouse/Disposal
Monzastraße 4a
63225 Langen

UG-910019-14 - 16 - © Fujitsu Microelectronics Europe GmbH