FUJITSU MB4072 DATA SHEET

查询MB4072供应商
FUJITSU SEMICONDUCTOR
DATA SHEET
LINEAR IC
1 CHANNEL 8-BIT D/A CONVERTER
MB4072
The Fujitsu MB4072 is a High-Speed Digital to Analog Converter IC. The MB4072’s current outputs are high impedance open-collector, which provide voltage output w ith a load or current t o voltage conv erter for various applications with operational amplifiers, microcomputers, etc.
Threshold level of digital inputs is variable with the level control input for various interface level.
• Settling Time : 85ns
• Linearity Error : ±0.19%max.
• Full-scal e Temperature coefficient: ±10ppm/°C typ.
• Output Voltage Compliance : -10V to +18V
• Multiplying Operation
• True/Complimentary Current Sink Output
• Adjustable Threshold Level of Digital Inputs :Interface directly with TTL, CMOS, ECL, etc.
• Wide Supply Voltage Range : ±4.5V to ±18V
• Low Power Consumption : 33mW at ±5V typ.
• Operation Temperature : -40°C to +85°C
• Compatible with DAC-08
• Package : Plastic DIP Package: (Suffix: -P)
Plastic FPT Package: (Suffix: -PF)
DS04-13200-3E
PLASTIC PACKAGE
DIP-16P-M04
PLASTIC PACKAGE
FPT-16P-M06
PIN ASSIGNMENT
ABSOLUTE MAXIMUM RATINGS
(TA =25°C)
Parameter Symbol Value Unit
Supply Voltage V+ to V- 37 V Digital Input Voltage VI V- to V- +37 V Threshold Control Voltage VLC V- to V+ V
Reference Input Voltage Differential Reference Input
Voltage Reference Input Current IREF 5 mA Power Consumption PD 500 mW Storage Temp. TSTG -55 to +125 °C
NOTE: Permanent device damage may occur if the above Absolute Maximum
Ratings are exceeded. Functional operation should be restricted to the
conditions as detailed in the operational sections of this data sheet. Exposure to absolute maximum rating conditions for extended periods may affect de vice reliability .
VREF(+) V- to V+ V
VREF(-) V- to V+ V
VREF(+) to VREF(-) ±18.5 V
COMP
VLC
IOUT
IOUT
(MSB)B1
This device contains circuitry to protect the inputs against damage due to high static volta ges or electric fields. How ever , it is advised that normal precautions be taken to avoid application of any voltage higher than maxim um rated voltages to this high impedance circuit.
V-
B2 B3 B4
1 2 3 4
TOP VIEW
5 6 7 8
16 15 14 13 12 11 10
9
V
REF(-)
VREF(+) V+ B8(LSB) B7 B6 B5
1
MB4072
BIAS NETWORK
V+ V
Fig. 1 - BLOCK DIAGRAM
MSB LSB
LC B1 B2 B3 B4 B5 B6 B7 B8
113 5 6 7 8 9 10 11 12
INTERFACE LEVEL CONTROL CIRCUIT
4
IOUT
___
214
IOUTVREF(+)
CURRENT SW.
V
-
VREF(-)
15
+
-
REF Amp
16 3
COMP
RECOMMENDED OPERATING CONDITIONS
Parameter Symbol Unit
V+ +4.5 - +18 V
Supply Voltage
V- -18 - -4.5 V
Operating Temperature TA -40 - +85 °C
Min Typ Max
2
ELECTRICAL CHARACTERISTICS
(Recommended Operating Conditions unless otherwise noted.)
(V+ = +15V, V- = -15V, IREF = 2.0mA, TA = -40°C to +85°C )
MB4072
Parameter Symbol
Resolution 8 8 8 bits Monotonicity 8 8 8 bits Linearity Error LE - - ±0.19 % (FSR) Settling Time (Final Value: ±1/2 LSB, TA=25°C, On/Off
Switching for Each bit/All bits) Propagation Delay Time (TA=25°C, On/Off Switching for
Each bit/All bits) Temperature coefficient at full-scale TCIFS - ±10 ±50 ppm/°C Output Voltage Range (∆IFS 1/2 LSB, ROUT 20MΩ typ.) VOC -10 - +18 V Output Current at full-scale (VREF=10.000V, R14=5.000kΩ,
R15=5.000k, T Symmetry at full-scale (IFSS=IFS4-IFS2) TFSS - ±1.0 ±8.0 µA Output Current at zero scale IZS - 0.2 2.0 µA Output Current Range (R14=5.000k, R15=5.000kΩ,
V
REF=+15.0V, V-=-10V)
Output Current Range (R14=5.000k, R15=5.000kΩ, V
REF=+25.0V, V-=-12V)
A=25°C)
tS - 85 150 ns
tPLH tPHL
IFS4 1.94 1.99 2.04 mA
IOR1 2.1 - - mA
IOR2 4.2 - - mA
Min Typ Max
- 35 60 ns
Value
Unit
Low-level Input Voltage (VLC=0V) VIL - - 0.8 V High-level Input Voltage (VLC=0V) VIH 2.0 - - V Low-level Input Current (VLC=0V, VIN=-10V to +0.8V) IIL - -0.2 -10 µA High-level Input Current (VLC=0V, VIN=2.0V to 18V) IIH - 0.002 10 µA
3
Loading...
+ 5 hidden pages