Data Sheet FUJITSU Storage ETERNUS LT40 S2 Tape System
Data Sheet
FUJITSU Storage ETERNUS LT40 S2
Tape System
Flexible Entry System with Ample Scalability
ETERNUS LT Tape Storage
The affordable ETERNUS LT tape systems offer
impressive scalability and reliability. The highly
automated and cost-efcient backup solution meets
a wide range of demanding storage requirements
including long-term archiving, disaster recovery and
unattended backup for businesses of all sizes. The
ETERNUS LT family provides data encryption offering
enhanced security and compliance.
ETERNUS LT40 S2
The Fujitsu Storage ETERNUS LT40 S2 is a
highly reliable and cost effective tape library
ideal for small and midsized businesses
or branch ofces. It combines exceptional
storage density and up to 360 TB of
compressed capacity in a compact 2U form
factor. The pay-as-you-grow concept provides
high investment protection. The ETERNUS
LT40 S2 is certied for market-leading backup
and archiving software. Highly automated,
simple and remote operation enables usage
without any demand for local expert skills.
The standardized LTO technology features
high capacity, high speed and low cost. The
ETERNUS LT40 S2 provides hardware-based
data encryption offering enhanced security and
compliance.
Page 1 / 5www.fujitsu.com/eternus
Page 2
Data Sheet FUJITSU Storage ETERNUS LT40 S2 Tape System
Features & Benefits
Main FeaturesBenefits
High Density Tape Automation
Ultra-compact product with up to 24 slots in two height units Up to two LTO drives with SAS or Fibre Channel interface
Broad Scalability and Flexibility
Upgradeability from 12 to 24 slots via software license Partitioning via license key
Easy Management
Remote management utility and user friendly operator panel Mail slot Barcode reader
Data Security
Encrypts data autonomously with hardware encryption through LTO
drive
Supports WORM media
Ensures user-friendly and secure backup and archiving Minimizes administration efforts while saving time and money SAS interface allows exible storage architecture at relatively low
cost
High data throughput reduces dramatically the backup time
Easy upgrade to the needed storage capacity provides high
investment protection
Makes it easier to separate different LTO generations, avoids
undesired incompatible media loads
Build up two independent libraries out of one system
Automatism help to decrease the error rate of backup processes Easy administration enables conguration and diagnostic Quick input and output of up to three cartridges Short initialization time thanks to slot barcodes, also with
unoccupied data slots
Minimizes performance impact for encryption Guarantees high data security Fullls compliance regulations
Page 2 / 5www.fujitsu.com/eternus
Page 3
Data Sheet FUJITSU Storage ETERNUS LT40 S2 Tape System
Tape system interfaceFibre ChannelSASFibre ChannelSASFibre ChannelFibre ChannelSAS
Number of tape drives1 FH / 1 - 2 HH
Number of slots12 − 24
Number of mail slots3
Max. data throughput
nat./compr.
Total capacity native72 - 144 TB30 - 60 TB18 - 36 TB
Total capacity
recording uncompr.
Buffer size1000 MB512 MB256 MB
Recording formatMultiple track linear
Maximum data rate8 Gbit/s6 Gbit/s8 Gbit/s6 Gbit/s8 Gbit/s6 Gbit/s
Media Capacity
(uncompr./compr.)
Backwards compatibleRead/write compatibility with LTO-6
Tape width1/2 inch
Encryptionpossible
Compression noteAs used for storage capacity, one gigabyte (GB) = one billion bytes, and one terabyte (TB) = one trillion bytes.
NoteThe values for Write/read speed, Variable speed recording, Buffer size and Maximum data rate are per drive. The values for Data
Compressed data assume a compression factor of 2 (LTO-5) or 2.5 (LTO-6, LTO-7). The compression factor depends on the data
Uncompressed at nominal capacity.
throughput depend on user environment.
structure.
Installation specication
Dimension (W x D x H) - standard447.5 x 810 x 87.6 mm
Height Unit standard2 U
Weight16.5 kg (incl. 2 HH tape drive)
Ethernet Port (Mgmt)100/10 Mbit/s
Power voltage85 - 264 V (+/- 5 %)
Power frequency50 / 60 Hz (+/- 5 %)
Maximum Power Consumption85 - 264 V (+/- 5 %): 4 A (peak at power on)
Power phaseSingle
Switched OFF mode0.5 W
Unit ready (no tape loaded into drive)31 W
Write/read data no robotic moves37 W (One HH Tape drive)
Write/read data with robotic moves62 W (One HH Tape drive)
Environment
Maximum Heat Generation290 KJ
Temperature (operating)10 - 35 °C
Temperature (not operating)-30 - 60 °C
Humidity (operating)20 - 80 % (relative humidity, non-condensing)
Humidity (not operating)10 - 90 % (non-condensing)
Altitude3,000 m (10,000 ft.)
Operating environment linkhttp://docs.ts.fujitsu.com/dl.aspx?id=e4813edf-4a27-461a-8184-983092c12dbe
Page 3 / 5www.fujitsu.com/eternus
Page 4
Data Sheet FUJITSU Storage ETERNUS LT40 S2 Tape System
Compliance
Product safetyEN 60950-1, IEC 60950-1, UL 60950-1, CSA 60950-1
Electromagnetic CompatibilityEN 55022 Class A, EN 61000-3-3, EN 61000-3-2, ICES 003 Class A, FCC Part-15 Class A, VCCI Class A, AS/NZS CISPR22
Class A, CNS 13438
Electromagnetic ImmunityEN 55024
CE certication2004/108/EC, 2006/95/EC, 2011/65/EC
ApprovalscETLus, EAC
Environmental complianceRoHS compliant, WEEE compliant
Compliance notesThere is general compliance with the safety requirements of all European countries and North America. National
approvals required in order to satisfy statutory regulations or for other reasons can be applied for on request.
Warranty period1 year
Warranty typeOnsite warranty
Warranty Terms & Conditionswww.fujitsu.com/support
Product Support Services - the perfect extension
Support Pack OptionsAvailable in major business areas:
9x5, Next Business Day Onsite Response Time
9x5, 4h Onsite Response Time
24x7, 4h Onsite Response Time
Recommended Service24x7, Onsite Response Time: 4h
Service Lifecycle5 years after end of product life
Service Weblinkhttp://www.fujitsu.com/fts/services/support
Page 4 / 5www.fujitsu.com/eternus
Page 5
Data Sheet FUJITSU Storage ETERNUS LT40 S2 Tape System
Fujitsu OPTIMIZATION Services
In addition to Fujitsu ETERNUS LT40 S2, Fujitsu
provides a range of platform solutions. They
combine reliable Fujitsu products with the
best in services, know-how and worldwide
partnerships.
Fujitsu Portfolio
Built on industry standards, Fujitsu offers a full
portfolio of IT hardware and software products,
services, solutions and cloud offering, ranging
from clients to datacenter solutions and
includes the broad stack of Business Solutions,
as well as the full stack of Cloud offerings. This
allows customers to select from alternative
sourcing and delivery models to increase
their business agility and to improve their IT
operation’s reliability.
Computing Products
www.fujitsu.com/global/products/computing/
Software
www.fujitsu.com/software/
More information
Learn more about Fujitsu ETERNUS LT40
S2, please contact your Fujitsu sales
representative or Fujitsu Business partner, or
visit our website.
www.fujitsu.com/eternus
Fujitsu green policy innovation
Fujitsu Green Policy Innovation is our
worldwide project for reducing burdens on the
environment.
Using our global know-how, we aim to
contribute to the creation of a sustainable
environment for future generations through IT.
Please nd further information at http://www.