Fujitsu LPe16002B Service Manual
Data Sheet Emulex LPe16000 / LPe16002 Fibre Channel cards
Data Sheet
Emulex LPe16000 / LPe16002 Fibre Channel cards
LPe16000 single port / LPe16002 dual port 16 Gbit PCIe 3.0 Host Bus Adapters
Fibre Channel Host Bus Adapters (HBA) enable
data exchange over large distances and extend
your existing FUJITSU server systems by including
communication interfaces using high-speed
communication technology. All connections are
redundant and hot-pluggable.
The combination of hardware and software
exemplies the high-performance quality of
communication.
The number of system restarts is reduced thanks
to optimized software and extended error check
functions help improve the integrity of your
company’s information.
LPe16000 / LPe16002 Fibre Channel cards
The new 16 Gb/s Fibre Channel Host Bus Adapter
(HBA) for the PRIMERGY server is an optimal Fibre
Channel HBA for virtualized, cloud and mission
critical deployments. The Fibre Channel HBA
LPe16000/16002 takes performance to a new level
with PCIe 3.0 support, data integrity capabilities
and cloud scale reliability, and ease of use.
Organizations looking to improve performance,
protect against data corruption, and simplify
operations of FC SANs in cloud or high performance
environments can benet from deploying the
LPe16000/16002.
rst generation Fibre Channel adapters resulting
in rock-solid reliability in 16Gb/s, 8Gb/s and 4Gb/s
environments. With almost 1.2 million IOPS, they
are ideally suited for Fibre Channel connectivity
to solid state disks (SSDs) and new multi-core
processors.
The new PCI Express (PCIe) 3.0 LPe16000/16002
16 Gb/s Fibre Channel Host Bus Adapters (HBA)
provide outstanding input/output operations per
second (IOPS) performance plus lightning fast
response times and 4x better IOPS performance
per watt making it the clear choice for the toughest
virtualized, cloud and mission critical deployments.
The LightPulse single and dual port
LPe16000/16002 feature the Emulex bullet-proof
driver stack built on a heritage reaching back to the
Main Features Benefits
Support for 16 Gb/s, 8 Gb/s & 4 Gb/s Fibre Channel devices Provide superior performance for the enterprise
Comprehensive virtualization capabilities with support for N_Port ID
Virtualization (NPIV) and Virtual Fabric
BlockGuard® ready - ensure end-to-end data integrity Support IT server consolidation and energy conservation initiatives
Easy deployment of new rmware with minimal server reboots Assure data availability and data integrity
Efcient centralized administration of Emulex HBAs via powerful
management tools
Page 1 / 4 www.fujitsu.com/primergy
Integrate seamlessly into existing SANs
Improve IT staff productivity through simplied deployment and
management
Data Sheet Emulex LPe16000 / LPe16002 Fibre Channel cards
Technical details
Technical details
Controller Silicon Emulex XE201
Controller type Fibre Channel Host Bus Adapter
Connector type LC-style
Number of ports 1
2
Data transfer rate(s) 4 Gbit/s; 8 Gbit/s; 16 Gbit/s
Auto Negotiation support Yes
Bus interface PCIe 3.0 x8
Bus transfer rate 8GT/s
LEDs 2 LEDs per port (yellow and green)
Standards > Current ANSI/IETF Standards: FC-PI-4; FC-PI-5; FC-FS-2 with amendment 1; FC-AL-2 with amendments 1 and 2;
FC-LS-2; FC-GS-6; FC-DA; FC-SP-2; FCP-4; FC-MJS; FC-SB-4; FC-SP; SPC-4; SBC-3; SSC-3; RFC4338
> Legacy ANSI/IETF standards: FC-PH; FC-PH-2; FC-PH-3; FC-PI; FC-PI-2; FC-FS; FC-AL; FC-GS-2/3/4/5; FCP; FCP-2;
FC-SB-2; FC-FLA; FC-HBA; FC-PLDA; FC-TAPE; FC-MI; SPC-3; SBC-2; SSC-2; RFC2625
> PCIe base spec 3.0
> PCIe card electromechanical spec 3.0
> Fibre Channel class 2 and 3
> PHP hot plug-hot swap
Technology Optics: 16 Gb/s short wave lasers with LC type connectors
Supported cable length Operating at 16Gb
- OM4 (Multi-Mode 50/125μm, 4700 MHz*km) 125m
- OM3 (Multi-Mode 50/125μm, 2000 MHz*km) 100m
- OM2 (Multi-Mode 50/125μm, 500 MHz*km) 35m
Operating at 8Gb
- OM4 (Multi-Mode 50/125μm, 4700 MHz*km) 190m
- OM3 (Multi-Mode 50/125μm, 2000 MHz*km) 150m
- OM2 (Multi-Mode 50/125μm, 500 MHz*km) 50m
FC Controller notes the controller is equivalent to the original Emulex HBA LightPulse LPe16000B
the controller is equivalent to the original Emulex HBA LightPulse LPe16002B
Order code Product name (vendor) Height of bracket Number of ports Related product
MC-0JFC71 LPe16000B Low Prole (LP) 1 PRIMEQUEST Server
MC-0JFC72 LPe16000B Full Height (FH) 1 PRIMEQUEST Server
MC-0JFC81 LPe16002B Low Prole (LP) 2 PRIMEQUEST Server
MC-0JFC82 LPe16002B Full Height (FH) 2 PRIMEQUEST Server
MCX0JFC71 LPe16000B Low Prole (LP) 1 PRIMEQUEST Server
MCX0JFC72 LPe16000B Full Height (FH) 1 PRIMEQUEST Server
MCX0JFC81 LPe16002B Low Prole (LP) 2 PRIMEQUEST Server
MCX0JFC82 LPe16002B Full Height (FH) 2 PRIMEQUEST Server
S26361-F4994-E1 LPe16000B Full Height (FH) 1 PRIMERGY Server
S26361-F4994-E201 LPe16000B Low Prole (LP) 1 PRIMERGY Server
S26361-F4994-E202 LPe16002B Low Prole (LP) 2 PRIMERGY Server
S26361-F4994-E2 LPe16002B Full Height (FH) 2 PRIMERGY Server
S26361-F4994-L501 LPe16000B Full Height / Low Prole 1 PRIMERGY Server
S26361-F4994-L502 LPe16002B Full Height / Low Prole 2 PRIMERGY Server
Environment
Power consumption single: typical 9.3W; max 11.6 W
dual: typical 11.1W; max 13.3 W
Temperature (operating) 0 - 55 °C
Storage temperature -40 - 70 °C
Page 2 / 4 www.fujitsu.com/primergy
Loading...