Fujitsu LifeBook U820 BIOS Guide

Fujitsu LifeBook

FUJITSU COMPUTER SYSTEMS CORPORATION

U Series

BIOS Guide

LifeBook U Series Model:

U820

Document Date: 12/01/2008

Document Part Number: FPC58-1926-01

1

LifeBook U Series BIOS

[ ], [ ]

[ ], [ ].

U Series BIOS

BIOS SETUP UTILITY

The BIOS Setup Utility is a program that sets up the
operating environment for your notebook. Your BIOS
is set at the factory for normal operating conditions,
therefore there is no need to set or change the BIOS
environment to operate your notebook.

The BIOS Setup Utility configures:

■

Device control feature parameters, such as changing
I/O addresses and boot devices.

■

System Data Security feature parameters, such
as passwords.

Entering the BIOS Setup Utility

To enter the BIOS Setup Utility, do the following (or use
the TrustedCore Menu, as detailed in the next section):

1. Turn on or restart your notebook.

2. Press [F2] once the Fujitsu logo appears on the
screen. This will open the main menu of the BIOS
Setup Utility with the current settings displayed.

3. Press the [RIGHT ARROW] or [LEFT ARROW] key
to scroll through the other setup menus to review or
alter the current settings.

Using the TrustedCore Menu

When the Fujitsu logo appears on the screen. press the
[Enter] key or click on the left mouse or touchpad
button; the TrustedCore Menu will appear.

The TrustedCore Menu provides shortcuts to the
following menus and information screens:

■

BIOS Setup

■

Diagnostic Screen

■

Boot Menu

■

Recovery and Utility

■

Diagnostic Program

■

Patent Information

■

System Information

■

Continue Booting

Clicking on any of the fields will invoke the screen,
information, or action described.

The Boot Menu can also be invoked by pressing the
[F12] key when the Fujitsu logo appears on the screen.

Navigating through the Setup Utility

The BIOS setup utility consists of six menus: Info,
System, Advanced, Security, Boot, and Exit. This docu­ment explains each menu in turn, including all
submenus and setup items.

The following procedures allow you to navigate the
setup utility menus:

1. To select a menu, use the cursor keys:

2. To select a field within a menu or a submenu, use the

cursor keys:

3. To select the different values for each field, press the
[Spacebar] or [+] to change to the next lower
selection and [F5] or [-] to go to the next higher
selection.

4. To activate a submenu press the [Enter] key.

5. To return to a menu from a submenu, press the [Esc]
key.

6. To go to the Exit menu from any other menu,
press the [Esc] key.

■

Selecting a field causes a help message
about that field to be displayed on the
right-hand side of the screen.

■

Pressing the Enter key with the highlight
on a selection that is not a submenu or
auto selection will cause a list of all
options for that item to be displayed.
Pressing the Enter key again will select
the highlighted choice.

7. Pressing the [F9] key resets all items in the BIOS to
the default values.

8. Pressing the [F10] key saves the current configura­tion and exits the BIOS Setup Utility. You will be
asked to verify this selection before it is executed.

9. Pressing the [F1] key gives you a general help screen.

Entering the Setup Utility After a Configuration Change or System Failure

If there has been a change in the system configuration
that does not agree with the parameter settings stored in
your BIOS memory, or there is a failure in the system,
the system beeps and/or displays an error message after
the Power On Self Test (POST). If the failure is not too

2

severe, it will give you an opportunity to modify the
setup utility settings, as described in the following steps:

1. When you turn on or restart the computer there is a
beep and/or the following message appears on the
screen:

Error message - please run SETUP
program Press <F1> key to continue,
<F2> to run SETUP

2. If an error message is displayed on the screen, and
you want to continue with the boot process and start

the operating system anyway, press the [F1] key.

■

If your notebook emits a series of beeps
that sounds like a code and the display is
blank, please refer to the Troubleshoot­ing Section in the system User’s Guide.
The Troubleshooting Section includes a
list of error messages and their meanings.

■

If your data security settings require it,
you may be asked for a password before
the operating system will be opened.

3. If an error message is displayed on the screen, and
you want to enter the setup utility, press the [F2] key.

4. When the setup utility starts with a fault present, the
system displays the following message:

Warning!
Error message
[Continue]

5. Press any key to enter the setup utility. The system
will then display the Info Menu with current param­eters values.

Info Menu

3

LifeBook U Series BIOS

INFO MENU - DISPLAYS BASIC SYSTEM INFORMATION

The Info Menu is a display only screen that provides the
configuration information for your notebook.

those fields. These fields are for information purposes
only, and cannot be modified by the user.

The following table shows the names of the menu fields
for the Info menu and the information displayed in

Phoenix SecureCore(tm) Setup Utility

Info

Product Name: LifeBook U820

Configuration ID: XXXXXXXXXXXXXXXX
Serial Number: XXXXXXXX
BIOS Version: 1.XX (XX/XX/2008)

Processor Type: Intel(R) Atom(TM)CPU Z530 @ 1.60GHz
L2 Cache: 512 KB

Total Memory: 1024 MB
Onboard Memory Slot 1: 1024 MB DDR2 SDRAM

Onboard MAC Address: XX-XX-XX-XX-XX-XX
UUID: XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX

F1 Help
ESC Exit

Select Item
Select Menu

-/Space Change Values
Enter Select Sub-Menu

The information, including CPU type and
speed, and total memory, displayed on this
screen varies according to the unit you
purchased.

▲

F9 Setup Defaults
F10 Save and Exit

Figure 1. Info Menu

Table 1: Fields, Options and Defaults for the Info Menu

Note that all of the fields on this screen are display only and are for reference.
Note that some the information listed will be different for your system, depending upon the system configuration.

Menu Field Default Menu Field Default

Product Name: LifeBook U820 L2 Cache: 512 KB

Configuration ID: XXXXXXXXXXXXXXXXX Total Memory: 1024 MB

Serial Number: XXXXXXXX Onboard Memory Slot 1: 1024 MB DDR2 SDRAM

BIOS Version: 1.XX (XX/XX/2008) Onboard MAC Address: XX-XX-XX-XX-XX-XX

Processor Type: Intel(R) Atom(TM) CPU 2530 @ 1.60GHz UUID: XXXXXXXX-XXXX-....

4

Phoenix SecureCore(tm) Setup Utility

F1 Help
ESC Exit

Select Item
Select Menu

-/Space Change Values
Enter Select Sub-Menu

F9 Setup Defaults
F10 Save and Exit

▲

Info System Advanced Security Boot Exit

Item Specific Help

Adjust calendar clock.

<Tab>, <Shift-Tab>, or
<Enter> selects field.

▲

System Time: [XX:XX:XX]

System Date: [XX/XX/2008]

Drive0 [TOSHIBA MK6028GAL]

Language: [English (US)]

System Menu

SYSTEM MENU – SETTING STANDARD SYSTEM PARAMETERS

The System Menu allows you to set or view the current
system parameters. (See Navigating through the Setup

Utility on page 2 for more information.)

The following tables show the names of the menu fields
for the System menu and its submenus, all of the options
for each field, the default settings and a description of

the field’s function and any special information needed
to help understand the field’s use.

System Time and System Date can also be
set from your operating system without
using the setup utility. Use the Date and
Time icon on your Windows Control panel
or type time or date from the MS-DOS
prompt.

Table 2: Fields, Options and Defaults for the System Menu

Note that the parameters listed in the following table may vary depending upon your system’s configuration.

Menu Field Options Default Description

System Time: –— –— Sets and displays the current time. Time is in a 24 hour format

System Date: –— –— Sets and displays the current date. Date is in a month/day/year

Figure 2. System Menu

of hours:minutes:seconds with 2 digits for each. (HH:MM:SS).
Example: 16:45:57. You may change each segment of the time
separately. Move between the segments with the [Tab] key and/or
[Shift] + [Tab] keys.

numeric format with 2 digits each for month and day and 4 digits for
year. (MM/DD/YYYY) for example: 03/20/2008. You may
change each segment of the date separately. Move between the
segments with the [Tab] key and/or [Shift] + [Tab] keys.

5

LifeBook U Series BIOS

Table 2: Fields, Options and Defaults for the System Menu

Note that the parameters listed in the following table may vary depending upon your system’s configuration.

Menu Field Options Default Description

Drive0 Selects the Drive0

Serial ATA drive
submenu

■

Language:

English (US)

■

Japanese (JP)

The product number
of the hard drive.

Display the type of device on this ATA/IDE interface. Pressing the
Enter key selects the Serial ATA Drive0 submenu allowing additional
device configuration options for this interface.

[English (US)] The default setting differs between the US/European and the

Japanese model. Selects the display language for the BIOS.

6

Drive0 Submenu of the System Menu

Phoenix SecureCore(tm) Setup Utility

F1 Help
ESC Exit

Select Item
Select Menu

-/Space
Enter

F9 Setup Defaults
F10 Save and Exit

Change Values
Select Sub-Menu

Item Specific Help

[Disabled]
The drive is disabled.

[Enabled]
The drive is enabled.

Drive0 [TOSHIBA MK6028GAL]

Drive0: [Enabled]

Type: Hard Disk
Model: TOSHIBA MK6028GAL
Capacity: 60GB
(60,011,642,880 Bytes)

▲

System

The Drive0 submenu identifies what ATA devices are installed.

System Menu

Figure 3. Drive0 Master Submenu

Table 3: Fields, Options and Defaults for the Drive0 Submenu of the System Menu

Menu Field Options Default Description

Drive0:

Typ e:

Model:

Capacity:

■

Disabled

■

Enabled

---

---

[Enabled] Allows you to enable or disable the hard disk drive.

--- The type of drive identified as Drive0.

--- The model of your hard disk

---

--- The maximum capacity of your hard disk

Exiting from System Menu

When you have finished setting the parameters on this menu, you can either exit from the setup utility, or move to
another menu. If you wish to exit from the setup utility, press the [Esc] key or use the cursor keys to go to the Exit
menu. If you wish to move to another menu, use the cursor keys.

7

LifeBook U Series BIOS

ADVANCED MENU – SETTING DEVICE FEATURE CONTROLS

The Advanced Menu allows you to:

■

Set the keyboard and mouse features.

■

Select between the display panel and an external
display.

■

Enable or disable the S-ATA, Bluetooth, LAN, and
Wireless LAN controllers.

■

Configure CPU and USB features in your system.

■

Configure a variety of miscellaneous features,
including fan settings and the power button.

Phoenix SecureCore(tm) Setup Utility

Info System Advanced Security Boot Exit

▲ ▲ ▲ ▲ ▲

Keyboard Features
Video Features
Internal Device Configurations
CPU Features
USB Features

▲ ▲

Miscellaneous Configurations

Event Logging

(See Navigating through the Setup Utility on page 2 for
more information.)

The following tables show the names of the menu fields
for the Advanced Menu and its submenus, all of the
options for each field, the default settings and a descrip­tion of the field’s function and any special information
needed to help understand the field’s use.

Item Specific Help

Configures keyboard/
mouse features.

F1 Help
ESC Exit

Select Item
Select Menu

-/Space
Enter

Change Values

▲

Select Sub-Menu

F9 Setup Defaults
F10 Save and Exit

Figure 4. Advanced Menu

Table 4: Fields, Options and Defaults for the Advanced Menu

Menu Field Description

Keyboard Features When selected, opens the Keyboard Features submenu, which allows enabling and disabling the

Video Features When selected, opens the Video Features submenu, which allows setting of the display parameters,

Internal Device Configurations When selected, opens the Internal Device Configuration submenu, which allows enabling or

8

NumLock feature.

including routing of video signals to different displays.

disabling the ATA, Bluetooth, LAN, and WLAN Controllers.

Table 4: Fields, Options and Defaults for the Advanced Menu

Menu Field Description

Advanced Menu

CPU Features When selected, opens the CPU Features submenu to allow you to change the CPU speed for battery

USB Features When selected, opens the USB Features submenu to allow you to enable or disable legacy USB

Miscellaneous Configurations When selected, opens the Miscellaneous Configurations submenu to allow you to enable or disable

Event Logging When selected, opens the event logging submenu.

life optimization.

devices and SCSI SubClass support.

the power button, Wake Up On LAN, and control volume settings.

9

LifeBook U Series BIOS

F1 Help
ESC Exit

Select Item
Select Menu

-/Space
Enter

F9 Setup Defaults
F10 Save and Exit

Change Values
Select Sub-Menu

▲

Item Specific Help

[On] or [Off]
Numlock is On or Off.

* Windows XP or later
OS preserves Numlock
state when the user
logs off.

Keyboard Features

Numlock: [Off]

Phoenix SecureCore(tm) Setup Utility

Info System Advanced Security Boot Exit

Keyboard Features Submenu of the Advanced Menu

The Keyboard Features submenu is for setting the NumLock feature for the keyboard.

Figure 5. Keyboard Features Submenu

Table 5: Fields, Options and Defaults for the Keyboard Submenu of the Advanced Menu

Menu Field Options Default Description

Numlock:

10

■

On

■

Off

[Off] Sets the NumLock function state when the computer completes boot-

ing. When [On] or [Off], Numlock is on or off.

Windows XP (or later OS) preserves Numlock state when the user logs
off.

Video Features Submenu of the Advanced Menu

F1 Help
ESC Exit

Select Item
Select Menu

-/Space
Enter

F9 Setup Defaults
F10 Save and Exit

Change Values
Select Sub-Menu

▲

Item Specific Help

Select display terminal.

* This setting is not
effective after
operating system
starts up.

Video Features

Display: [Auto]

Phoenix SecureCore(tm) Setup Utility

Info System Advanced Security Boot Exit

The Video Features submenu is for setting the display parameters.

Advanced Menu

Figure 6. Video Features Submenu

Table 6: Fields, Options and Defaults for the Video Features Submenu of the Advanced Menu

Menu Field Options Default Description

Display:

■

Internal Flat Panel

■

External

■

Auto

[Auto] Selects where the video signal will be routed. Note that this setting is

overridden after Windows starts up.

11

LifeBook U Series BIOS

F1 Help
ESC Exit

Select Item
Select Menu

-/Space
Enter

F9 Setup Defaults
F10 Save and Exit

Change Values
Select Sub-Menu

▲

Item Specific Help

[Disabled]
IDE port is disabled.

[Enabled]
IDE port is enabled.

Internal Device Configurations

IDE Controller: [Enabled]
Bluetooth(R): [Enabled]
LAN Controller: [Enabled]
CF Slot: [Enabled]
Wireless LAN: [Enabled]
UMTS Device: [Enabled]
GPS Device: [Enabled]

Info System Advanced Security Boot Exit

Phoenix SecureCore(tm) Setup Utility

Internal Device Configurations Submenu of the Advanced Menu

The Internal Device Configuration submenu allows the user to enable or disable IDE, Bluetooth, LAN, Wireless LAN
Controllers as well as the UMTS and GPS devices.

Figure 7. Internal Device Configuration Submenu

Table 7: Fields, Options and Defaults for the Internal Device Configuration Submenu of the Advanced Menu

Menu Field Options Default Description

IDE Controller:

Bluetooth Controller:

LAN Controller:

CF Slot:

Wireless LAN:

UMTS Device:

GPS Device:

12

■

Disabled

■

Enabled

■

Disabled

■

Enabled

■

Disabled

■

Enabled

■

Disabled

■

Enabled

■

Disabled

■

Enabled

■

Disabled

■

Enabled

■

Disabled

■

Enabled

[Enabled] Enables or disables the IDE port.

[Enabled] Enables or disables the Bluetooth controller.

[Enabled] Enables or disables the LAN controller. Note that when this is disabled, the

CF Slot selection below is enabled; when enabled, CF Slot is disabled.

[Enabled] Enables or disables the Bluetooth controller. Note that when LAN Control-

ler is disabled, CF Slot is enabled; when LAN Controller is enabled, CF Slot
is disabled.

[Enabled] Enables or disables the Wireless LAN controller.

[Enabled] Enables or disables the UMTS device.

[Enabled] Enables or disables the GPS device.

F1 Help
ESC Exit

Select Item
Select Menu

-/Space
Enter

F9 Setup Defaults
F10 Save and Exit

Change Values
Select Sub-Menu

▲

Item Specific Help

Select HT Technology
enabled or disabled.

CPU Features

HT Technology:

SpeedStep(R) Technology: [Enabled]
On Battery: [Battery Optimized]
On AC: [Maximum Performance]

XD Bit functionality: [Enabled]
Virtualization Technology: [Disabled]

[Enabled]

Phoenix SecureCore(tm) Setup Utility

Info System Advanced Security Boot Exit

Advanced Menu

CPU Features Submenu of the Advanced Menu

The CPU Features submenu provides options for configuring the Hyper-Threading Technology and SpeedStep power
management features of the CPU.

Figure 8. CPU Features Submenu

Table 8: Fields, Options and Defaults for the CPU Features Submenu of the Advanced Menu

Menu Field Options Default Description

HT Technology:

SpeedStep(R)
Technology:

On Battery:

On AC:

XD Bit functionality:

Virtualization
Technology:

■

■

■

■

■

■

■

■

■

■

■

■

■

■

Enabled
Disabled

Disabled
Enabled

Maximum Performance
Battery Optimized
Automatic

Maximum Performance
Battery Optimized
Automatic

Enabled
Disabled

Disabled
Enabled

[Enabled] Enables or disables the Hyper-Threading (HT) Technology

[Enabled] Enables or disables the SpeedStep(R) Technology features. When

[Battery
Optimized

[Maximum
Performance]

[Enabled] Enables or disables the Execute Disable Bit feature.

[Disabled] Enables or disables Virtualization Technology, an Intel technology

features which make more efficient use of processor resources..

disabled, On Battery and On AC are disabled.

Allows the user to select the power conditions when the system
is running on battery power.

Allows the user to select the power conditions when the system
is running on AC power.

which includes hardware enhancements to improve upon soft­ware-based virtualization technologies.

13

LifeBook U Series BIOS

F1 Help
ESC Exit

Select Item
Select Menu

-/Space
Enter

F9 Setup Defaults
F10 Save and Exit

Change Values
Select Sub-Menu

▲

Item Specific Help

[Disabled]
The feature is disabled.

[Enabled]
Legacy USB Emulation
is enabled and USB
devices are available
without USB aware OS.

Legacy USB Support
SCSI SubClass Support: [Enabled]

[Enabled]

USB Features

Advanced

Phoenix SecureCore(tm) Setup Utility

USB Features Submenu of the Advanced Menu

The USB Features submenu provides options for enabling or disabling the USB devices.

Table 9: Fields, Options and Defaults for the USB Features Submenu of the Advanced Menu

Menu Field Options Default Description

Legacy USB Support:

SCSI SubClass Support:

14

■

Disabled

■

■

■

Enabled

Disabled
Enabled

Figure 9. USB Features Submenu

[Enabled] When Enabled is selected, Legacy USB Emulation is enabled

[Enabled] When Enabled is selected, USB devices that belong to the

and the USB devices are available without a USB-aware OS.
When Disabled is selected, Legacy USB support is disabled.

SCSI subclass in the mass storage class (e.g., USB Memory
Key) are enabled. Note that enabling this feature may cause
the system to hang during POST, depending on the device
that is connected.

Advanced Menu

Miscellaneous Configurations Submenu of the Advanced Menu

The Miscellaneous Configurations submenu provides options for enabling or disabling the power button and the
Wake Up On LAN feature, and setting the volume and video memory size.

Phoenix SecureCore(tm) Setup Utility

Advanced

Miscellaneous Configurations

Power Button:
Wake up on LAN:
Force LAN Boot:
Auto Save to Disk:
Volume Setting:
Hardware Power Management:
Touch Panel Setting:

[Disabled]

[Disabled]
[Disabled]
[On]
[Middle]
[Disabled]
[Tablet]

Item Specific Help

Configures the power
button.

*ACPI OS ignores this
setting.

F1 Help
ESC Exit

Select Item
Select Menu

-/Space

Change Values

Enter

Select Sub-Menu

▲

F9 Setup Defaults
F10 Save and Exit

Figure 10. Miscellaneous Configurations Submenu

Table 10: Fields, Options and Defaults for the Miscellaneous Configurations Submenu of Advanced Menu

Menu Field Options Default Description

Power Button:

Wake up on LAN:

Force LAN Boot:

Auto Save to Disk:

Volume Setting:

Hardware Power
Management:

Touch Panel Setting:

■

Disabled

■

Power Off

■

Disabled

■

Enabled

■

Disabled

■

Enabled

■

Off

■

On

■

Off

■

Minimum

■

Middle

■

Maximum

■

Disabled

■

Enabled

■

Touch Panel

■

Tab le t

[Disabled] Selecting Disabled disables the power button. Selecting Power Off allows you to

turn off system power with the power button.

[Disabled] Select Enabled to allow the system to wake up when the internal LAN device

receives a specific signal while powered off. Select Disabled to disable the feature.

[Disabled] This feature is active only when “Wake up on LAN” is enabled. When enabled, in

the event of a system wake-up on LAN, the system will try to first boot from the
LAN before attempting to boot from any other device, regardless of the BIOS
boot priority settings or disabling of the Preboot Execution Environment.

[On] Turns the Auto Save to Disk feature on and off.

[Middle] Selects the initial volume setting for the system.

[Disabled] Enables or disables the Hardware Power Management feature.

[Tablet] When Touch Panel is selected, Touch Panel mode is set when the operating

system does not support the Tablet function. When Tablet is selected, Tablet
mode is set when the operating system supports the Tablet function.

15

LifeBook U Series BIOS

Event Logging Submenu of the Advanced Menu

The Event Logging submenu configures event logging features for DMI events.

Phoenix SecureCore(tm) Setup Utility

Advanced

Event Logging

Event Log Capacity: Space Available
Event Log Validity: Valid

Item Specific Help

Press <Enter> key to
view the contents of
the event log.

View Event Log: [Enter]

Event Logging: [Enabled]
System Boot Event: [Disabled]

Clear All Event Logs: [No]

Mark Events as Read: [Enter]

F1 Help
ESC Exit

Select Item
Select Menu

-/Space
Enter

Change Values

▲

Select Sub-Menu

F9 Setup Defaults
F10 Save and Exit

Figure 11. Event Logging Submenu

Table 11: Fields, Options and Defaults for the Event Logging Submenu of the Advanced Menu

Menu Field Options Default Description

Event Log Capacity: Space Available Display only

Event Log Validity: Valid Display only

■

View Event Log:

Event Logging:

System Boot Event:

Clear All Event Logs:

Mark Events as Read:

Enter [Enter] Allows you to view content of event log

■

Disabled

■

Enabled

■

Disabled

■

Enabled

■

No

■

Yes

■

Enter [Enter] Lets you mark all events currently in the event log as having been read.

[Enabled] Turns event logging on and off for all DMI events.

[Disabled] Turns event logging on and off for DMI system boot events.

[No] When set to [Yes] all event logs will be cleared at next boot.

16

F1 Help
ESC Exit

Select Item
Select Menu

-/Space
Enter

F9 Setup Defaults
F10 Save and Exit

Change Values
Select Sub-Menu

▲

Item Specific Help

Press <Enter> key to
set Supervisor Password
to enable any password
features.

Then password entry is
required to enter BIOS
Setup.

Supervisor Password Is: Clear
User Password Is: Clear

Set Supervisor Password [Enter]
Set User Password [Enter]
Minimum User Password Length: [0]
Password on Boot: [Disabled]
On Automatic Wake up: [Disabled]
Boot from Removable Media: [All]
Flash Write: [Enabled]
Hard Disk Security
Owner Information

▲ ▲

Phoenix SecureCore(tm) Setup Utility

Info System Advanced Security Boot Exit

Security Menu

SECURITY MENU – SETTING THE SECURITY FEATURES

The Security menu allows you to set up the data security
features of your notebook to fit your operating needs
and to view the current data security configuration. (See

Navigating through the Setup Utility on page 2 for more
information.)

The following tables show the names of the menu fields
for the Security Menu and its submenus, all the options
for each field, the default settings and a description of
the field's function and any special information needed
to help understand the field's use. The default condition
is no passwords required and no write protection.

Remember your passwords! If you set and
forget your User and Master hard disk
passwords, Fujitsu Computer Systems will
not be able to reset it. You may lose data
and have to replace your system board or
hard disk drive.

■

Entering a password incorrectly 3 times in
a row causes the keyboard and mouse to
be locked out and the warning [System
Disabled] to be displayed. If this hap­pens, restart the computer by turning off
and on the power with the power switch
and use the correct password on reboot.

■

If you make an error when re-entering
the password a Warning will display on
the screen. To try again press [Enter],
then retype the password. Press [Esc] to
abort the password setting process.

Figure 12. Security Menu

17

LifeBook U Series BIOS

Table 12: Fields, Options and Defaults for the Security Menu

Menu Field Options Default Description

Supervisor
Password is:

–— Clear A display-only field. Set is displayed when the system supervisor password is

set and Clear when it is not.

User Password is: –— Clear A display-only field. Set is displayed when the general user

password is set, and Clear when it is not.

Set Supervisor
Password

–— [Enter] Sets, changes or cancels the Supervisor Password. The Supervisor Password

may be up to seven characters long and must include only letters or numbers
(no symbols). Passwords are NOT case-sensitive. To cancel a password press
the Enter key instead of entering characters in the Enter New Password field
and in the Re-enter New Password field. When a Supervisor Password is set
it must be used to access the BIOS setup utility.

NOTES: If your system has the Pre-Boot Authentication (PBA) feature, you
cannot log in as a supervisor using your fingerprint. Note, also, that on fin­gerprint-enabled PBA systems, when the supervisor password is cleared, the
BIOS will display a message asking you to acknowledge that the BIOS fin­gerprint data will be cleared as well.

Set User Password –— [Enter] This field can only be accessed if the Supervisor Password is set. Sets,

changes or cancels the User Password. A User Password may be up to seven
characters long and must include only letters or numbers (no symbols). Pass­words are NOT case-sensitive. To cancel a password press [Enter] key instead
of entering characters in the Enter New Password field and in the Re-enter
New Password field. When a User Password is set it must be used to access
the BIOS setup utility.

Minimum User
Password Length:

Password on Boot:

–— [0] Supervisor can set password length (0 to 8) for user password. User cannot

set a password shorter than the minimum length.

■

Disabled

■

First Boot

■

Every Boot

[Disabled] When set to First Boot, a password (User or Supervisor) is required just once

after the Power On Self Test (POST) before the operating system will be read
from a disk. When set to Every Boot, a password (User or Supervisor) is
required every time after the Power On Self Test (POST) before the operat­ing system will be read from a disk. When set to Disabled no password is
required.

NOTE: If your system has the Pre-Boot Authentication (PBA) feature, this
field must be set to [Every Boot] to ensure that the PBA window appears.

■

On Automatic
Wake up:

Boot from
Removable Media:

Flash Write:

Disabled

■

Enabled

■

All

■

Supervisor only

■

Disabled

■

Enabled

[Disabled] When disabled, password entry is not required when the system wakes up

automatically. When enabled, password entry is required upon wake up.

[All] Supervisor only allows access to boot the computer to removable media after

the Supervisor Password is entered.

[Enabled] When disabled, the BIOS Flash memory will be write protected.

Hard Disk Security: –— –— Configures hard disk security features

Owner Information: –— –— Sets Owner information.

Exiting from the Security Menu

When you have finished setting the parameters on the Security Menu, you can either exit from setup utility or move to
another menu. If you wish to exit from setup utility, press the [Esc] key to go to the Exit Menu. If you wish to move to
another menu, use the cursor keys.

18

Hard Disk Security Submenu of the Security Menu

F1 Help
ESC Exit

Select Item
Select Menu

-/Space
Enter

F9 Setup Defaults
F10 Save and Exit

Change Values
Select Sub-Menu

▲

Item Specific HelpHard Disk Security

Drive0: Clear
Set Master Password [Enter]
Set User Password [Enter]

Password Entry on Boot: [Enabled]

Phoenix SecureCore(tm) Setup Utility

Info System Advanced Security Boot Exit

The Hard Disk Security submenu is for configuring hard disk security features.

Security Menu

Figure 13. Hard Disk Security Submenu

Table 13: Fields, Options and Defaults for the Hard Disk Security Submenu of the Security Menu

Menu Field Options Default Description

Drive0:

Set Master
Password

Set User Password

___

___

___

■

Password Entry on
Boot:

Disabled

■

Enabled

Clear Display-only. Default is Clear. When the Drive0 Password has been set, the field

[Enter] Sets, changes or cancels the Drive0 Master Password. The Drive0 Master Password

[Enter] Sets, changes or cancels the Drive0 User Password. The Drive0 User Password may

[Enabled] When set to disabled, entry of a Hard Disk Password is not required before OS boot.

changes to Set. When this password is set, the primary hard disk drive cannot be
used in another system unless the password is entered.

may be up to seven characters long and must include only letters or numbers (no
symbols). Passwords are NOT case-sensitive. When a Drive0 Master Password is set,
it must be used to access the hard drive if it is used in another system. Note that the
password will not take effect until the system has been rebooted.

be up to seven characters long and must include only letters or numbers (no sym­bols). Passwords are NOT case-sensitive. When a Drive0 User Password is set, it
must be used to access the modular hard drive if it is used in another system. Note
that the password will not take effect until the system has been rebooted.

(The hard disk is still password-protected without password entry.)

19

LifeBook U Series BIOS

Owner Information Submenu of the Security Menu

The Owner Information submenu is for setting owner information. Note that the owner information cannot be set
without having entered a Supervisor Password.

Phoenix SecureCore(tm) Setup Utility

Security

Item Specific HelpOwner Information

Owner Information Is: Clear

Set Owner Information [Enter]

Foreground Color: [Gray]
Background Color: [Black]

F1 Help
ESC Exit

Select Item
Select Menu

-/Space
Enter

Change Values

▲

Select Sub-Menu

F9 Setup Defaults
F10 Save and Exit

Figure 14. Owner Information Submenu

Table 14: Fields, Options and Defaults for the Owner Information Submenu of the Security Menu

Menu Field Options Default Description

Owner Information
Is:

Set Owner Informa­tion:

Foreground Color:

Background Color:

20

–— Clear Display only.

–— [Enter] Field to write owner informa-

■

Black

■

Blue

■

Green

■

Cyan

■

Red

■

Magenta

■

Black

■

Blue

■

Green

■

Cyan

■

Red

■

Magenta

■

Brown

■

White

■

Gray

■

Light Blue

■

Light Green

■

Brown

■

White

■

Gray

■

Light Blue

■

Light Green

■

Light Cyan

■

Light Red

■

Light Magenta

■

Yellow

■

Bright White

■

Light Cyan

■

Light Red

■

Light Magenta

■

Yellow

■

Bright White

[Gray] Set foreground color.

[Black] Set background color.

tion, (i.e., name).

F1 Help
ESC Exit

Select Item
Select Menu

Item Specific Help

[Disabled]
Display the logo screen
during boot.

[Enabled]
Display the diagnostic
screen during boot.

Boot Time Diagnostic Screen:
Boot Menu: [Enabled]
Preboot Execution Environment: [Enabled]
Boot Device Priority

▲

-/Space
Enter

F9 Setup Defaults
F10 Save and Exit

Change Values
Select Sub-Menu

▲

[Disabled]

Info System Advanced Security Boot Exit

Phoenix SecureCore(tm) Setup Utility

Boot Menu

BOOT MENU – SELECTING THE OPERATING SYSTEM SOURCE

The Boot Menu is used to select the order in which the
BIOS searches sources for the operating system. Follow
the instructions for Navigating Through the Setup
Utility to make any changes. (See Navigating through the

Setup Utility on page 2 for more information.)

The following tables show the names of the menu fields
for the Boot menu and its submenu, all of the options
for each field, the default settings and a description of
the field's function and any special information needed
to help understand the field's use.

Figure 15. Boot Menu

Table 15: Fields, Options and Defaults for the Boot Menu

Disabled
Enabled

Disabled
Enabled

Disabled
Enabled

[Disabled] Turns on and off display of test results instead of Fujitsu logo screen

[Enabled] When Disabled, the Boot Menu is disabled and the [F12] key is

[Enabled] Turns on and off the preboot execution environment feature.

Menu Field Options Default Description

Boot-time
Diagnostic Screen:

Boot Menu:

Preboot Execution
Environment:

Boot Device Priority — — This menu allows setting up the source for the operating system.

■

■

■

■

■

■

during Power On Self Test.

ignored. When Enabled, the Boot Menu is enabled.

See “The Boot Device Priority Submenu” in the following section.

21

LifeBook U Series BIOS

F1 Help
ESC Exit

Select Item
Select Menu

Item Specific Help

Keys used to view or
configure devices:

<+>/<Space> or <->
moves the device up or
down.
<x> exclude or include
the device to boot.

Boot priority order:
1: Floppy Disk Drive
2: Drive0 HDD: TOSHIBA MK6028GAL
3: CD/DVD Drive
4: NETWORK: Realtek Boot Agent
5:
6:
7:
8:
Excluded from boot order:
: USB MEMORY: None
: USB HDD: None

-/Space
Enter

F9 Setup Defaults
F10 Save and Exit

Change Values
Select Sub-Menu

▲

Boot Device Priority

Phoenix SecureCore(tm) Setup Utility

Boot

Boot Device Priority Submenu of the Boot Menu

The Boot Device Priority submenu is for setting the order of checking of sources for the operating system.

■

Be aware of the operating environment when booting from a CD or you may overwrite files by mistake.

■

A bootable CD-ROM has a floppy disk format or a hard drive format. When a bootable CD-ROM is used,
drive allocations change automatically without changing the BIOS setup. If floppy disk format is used, the
CD-ROM becomes Drive A. The CD-ROM will only take drive C: (hard drive format) if the internal hard
drive is disabled or not present. The bootable CD-ROM can never use a C designation if a formatted inter­nal hard drive is present since the C designator is reserved for the internal hard drive.The boot sequence
ignores the new drive designations, however, your application software will use the new designations.

Figure 16. Boot Device Priority Submenu

Table 16: Fields, Options and Defaults for the Boot Device Priority Submenu of the Boot Menu

Menu Field Description

Boot priority order:
1: Floppy Disk Drive
2: Drive0:
3: CD/DVD Drive
4: NETWORK:
5:
6:
7:
8:
Excluded from boot order:
: USB MEMORY:
: USB HDD:

Exiting from Boot Menu

When you have finished setting the boot parameters with the Boot Menu, you can either exit from the setup utility or

The boot selections determine the order in which the BIOS searches for the operating system during a
startup sequence. To change the order, highlight one source by using the [up] or [down] cursor keys and
then press the [+] or [-] key to change the order number. Tapping [x] removes from the list a device that is
not installed. Tapping [x] on an item in the Excluded list adds the device to the Boot priority list. Be sure to
save your changed order when you exit the BIOS setup utility.

NOTE: Be aware that if you use the CD-ROM drive as the first boot device, certain files may be
overwritten, depending upon your operating environment.

move to another menu. If you wish to exit from the setup utility press the [Esc] key to go to the Exit Menu. If you wish
to move to another menu, use the cursor keys.

22

EXIT MENU – LEAVING THE SETUP UTILITY

F1 Help
ESC Exit

Select Item
Select Menu

-/Space Change Values
Enter Select Sub-Menu

F9 Setup Defaults
F10 Save and Exit

Item Specific Help

Exit System Setup and
save your changes to
CMOS.

Exit Saving Changes
Exit Discarding Changes
Load Setup Defaults
Discard Changes
Save Changes
Save Changes and Power Off

▲

Info System Advanced Security Boot Exit

Phoenix SecureCore(tm) Setup Utility

Exit Menu

The Exit Menu is used to leave the setup utility. Follow
the instructions for Navigating Through the Setup
Utility to make any changes. (See Navigating through the

Setup Utility on page 2 for more information.)

Figure 17. Exit Menu

Table 17: Fields, Options and Defaults for the Exit Menu

The following table shows the names of the menu fields
for the Exit menu, the default settings and a description
of the field's function and any special information
needed to help understand the field's use.

Menu Field Description

Exit Saving
Changes

Exit Discarding
Changes

Load Setup
Defaults

Discard
Changes

Save Changes Selecting Save Changes will cause the new settings in all menus to be written to the BIOS memory. The message Save

Save Changes
and Power Off

Exit Saving Changes and Exit will store all the entries on every menu of the setup utility to the BIOS memory, then exit
the utility. A confirmation message Save Configuration changes and exit now? [Yes][No] is displayed.

Selecting Exit Discarding Changes and Exit will exit the setup utility without writing to the BIOS memory. When the
BIOS recognizes this selection it will load the operating system and begin operation.

Selecting Load Setup Defaults will load the factory preset default values for all menu fields, then display the message
Load default configuration now? [Yes] [No]. When confirmed the setup utility will return to the Exit
Menu. To return to another menu, follow the directions in the Navigating Through the Setup Utility Section.

Selecting Discard Changes will load the previous values in BIOS memory for all menu fields. The message Load
previous configuration now? [Yes] [No] will be displayed. When confirmed the setup utility will return to
the Exit menu. To return to another menu, follow the directions in the Navigating Through the Setup Utility Section.

configuration changes now? [Yes] [No] will be displayed. When confirmed, the setup utility will return to
the Exit menu. To return to another menu, follow the directions in the Navigating Through the Setup Utility section.

Selecting Save Changes and Power Off will cause the new settings in all menus to be written to the BIOS memory. The
message Save configuration changes and power off now? [Yes] [No] will be displayed. When con­firmed, the system will shut down. If No is selected, the system will return to the Exit menu. To return to another menu,
follow the directions in the Navigating Through the Setup Utility section.

23