Fujitsu FTP-627USL401, FTP-627USL402 User Manual

24v drive, reCeiPT PriNTer MiCrO UNiT

2” HiGH SPeed THerMaL PriNTer

FTP-627USL401/402

Overview

■

The FTP-627 USL Series are 24V driven high-speed printers

with a ultra low prole auto cutter and long life.
The FTP-627 USL Series can be used for a variety of applica­tions, such as POS terminals, ticket vending machines, label
printers, banking terminals, and measurement and medical
equipment.

HiGHLiGHTS

■

Ultra low prole

•

Height 108 mm, width 100 mm, depth 94 mm

High speed printing

•

It can print at 100 mm/s (800 dotlines/s) maximum by using
Fujitsu's unique head drive control.

Auto Cutter

•

Long life and high reliable guilotine with dedicated motor.

Easy paper setting

•

Our lever platen release mechanism allows a
wide paper route, so 60 mm diameter paper can be easily
inserted. Conventional auto loading is also available.

Multifunctional die-cast frame

•

Wide operating temperature range, long continuous
printing, high ESD absorbtion and discharge of static
electricity vibration and shock resistant.

Barcodes

•

Prints standard, extended and 2-D types

RoHS compliant

•

FTP-627USL401 platen closed

FTP-627USL401 platen open

1

FTP-627USL401/402

nParT NUMberS

Part Number Power

Printer mechanism with cutter and board FTP-627USL401 (USB interface) 5V / 24V

FTP-627USL402 (Serial interface) 5V / 24V

FTP-627USL410 (USB/Serial) 24V only
Operation panel cable TBA
Interface cables Serial FTP-628Y302

USB FTP-629Y301

Power cables Logic FTP-629Y401

Head, motor FTP-629Y601

* Interface board is the : FTP-627DSL601 (Serial/ USB), FTP-627DSL603 (USB), FTP-627DSL605 (Serial)

nSPeCiFiCaTiONS

SpecicationsItem

Part number FTP-627USL401/402

Printing method Thermal-line dot method

Dot structure 432 dots/line

Dot pitch (Horizontal) 0.125 mm (8 dots/mm)—Dot density

Dot pitch (Vertical) 0.125 mm (8 dots/mm)—Line feed pitch

Effective printing area 54 mm

Number of columns ANK 36 columns/line (maximum 12 x 24 dot font)

Paper width 58 mm

Paper diameter 60 mm

Paper thickness 60 to 90 µ m (some paper in this range may not be used because
of paper characteristics)

Printing Speed Maximum 100mm/sec. (800 dot line/sec.) at 24V, 25oC

Character types

Alphanumeric, kana: 159 types
International characters: 195 types
JIS Kanji (Kanji CG loaded board): about 6800 types

12 × 24 dots, (1.5 × 3.0 mm), 36 columns: ANK

Character, dimensions (W×H), number
24 × 24 dots, (3.0 × 3.0 mm), 18 columns: ANK

of columns
8 × 16 dots, (1.0 × 2.0 mm), 54 columns: ANK
16 × 16 dots, (2.0 × 2.0 mm), 27 columns: ANK

Barcodes

CODE128

QR, Maxi , PDF417

Printing mode Page mode, line mode

Standard

Extended

2-D

UPC-A, UPC-E, JAN (EAN) 13, JAN (EAN) 8, Code 39, 1TF CODABAR

2

FTP-627USL401/402

nSPeCiFiCaTiONS

Item Specication
Iterface Conforms to USB/Serial

Power

supply

Dimensions Mechanism and board 100 x 94 x 108 mm (WxDxH)
Weight Mechanism and board Approximately 310g
Life Head

MTBF Mechanism 3,000 hours

Operating
environment

Detection
function

Recommended thermal sensitive paper High sensitive paper TF50KS-E4 (Nippon paper)

For print head 24 VDC average current, 0.5A (0.9A peak)

(print ratio: 12.5%, print speed 100mm/sec.)
For motor 24 VDC ±5%, 0.9 A maximum
For cutter 24 VDC ±5%, 1.1 A maximum

For logic 4.75 to 5.25VDC, 0.5 A maximum

Pulse durability: 50 million pulses/dot (under our standard
Cutter

Circuit board 500,000 hours
Operating temperature* 0ºC to +50ºC
Operating humidity 20 to 85% RH (no condensation)
Storage temperature -20ºC to +60ºC (paper not included)
Storage humidity 5 to 95% RH (no condensation)
Head temperature detection Detected by thermistor
Paper out/mark detection Detected by photo-interruptor
Platen release Detected by sliding switch

conditions); Abrasion resistance: paper traveling distance

50km (print ratio: 12.5% or less).

500,000 cuts (20 cuts/minute)

Standard paper TF60KS-E (Nippon paper),

FTP-020PU001 (58mm)

PD105R (Oji paper)
FTP-020P0701 (58mm)

Medium life paper TF60KS-F1 (Nippon paper)

FTP-020P0102 (58mm)
PD170R (Oji paper)
P220VBB-1 (Mitsubishi paper)

Long life paper PD160R (Oji paper)

AFP-235 (Mitsubishi paper)
TP50KJ-R (Nippon paper)
HA220AA (Nippon paper)

*+5˚C to +40˚C printing density assurance range.

3